RESUMEN
Lymphatic malformations are rare benign developmental anomalies of the lymphatic system that can be diagnosed by prenatal ultrasound. Depending on their anatomical site and size, the lesions can cause a variety of aesthetic and functional deficits. Several treatment options are available, the most suitable is still under debate. The experience gained at our Centre and the review of the literature can be useful to improve prenatal counseling, that is challenging due to the heterogeneity of clinical presentation and treatment.
Asunto(s)
Anomalías Linfáticas , Ultrasonografía Prenatal , Femenino , Humanos , Embarazo , Anomalías Linfáticas/diagnóstico por imagen , Anomalías Linfáticas/terapia , Diagnóstico Prenatal , Enfermedades Fetales/diagnóstico por imagen , Enfermedades Fetales/terapiaRESUMEN
Giant negative ion sources for neutral beam injectors deliver huge negative ion currents, thanks to their multi-beamlet configuration. As the single-beamlet optics defines the transmission losses along the beamline, the extraction of a similar current for all beamlets is extremely desirable, in order to facilitate the beam source operation (i.e., around perveance match). This Review investigates the correlation between the vertical profile of beam intensity and the vertical profiles of plasma properties at the extraction region of the source, focusing on the influence of increasing cesium injection. Only by the combined use of all available source diagnostics, described in this Review, can beam features on the scale of the non-uniformities be investigated with a sufficient space resolution. At RF power of 50 kW/driver, with intermediate bias currents and a filter field of 2.4 mT, it is found that the central part of the four vertical beam segments exhibits comparable plasma density and beamlet currents; at the edges of the central segments, both the beam and electron density appear to decrease (probably maintaining fixed electron-to-ion ratio); at the bottom of the source, an increase of cesium injection can compensate for the vertical drifts that cause a much higher presence of electrons and a lower amount of negative ions.
Asunto(s)
COVID-19 , Complicaciones Infecciosas del Embarazo , Femenino , Humanos , Pandemias , Embarazo , Mujeres Embarazadas , ARN , SARS-CoV-2RESUMEN
A movable Allison type emittance scanner is being developed to characterize the phase-space distribution of the beamlets of spectral phase interferometry for direct electric-field reconstruction, the prototype RF negative ion source of the ITER heating neutral beam injector. To test the electronics and verify the capability of the device to resolve nearby beamlets, a compact RF ion source prototype has been set up, capable of accelerating 1 mA of helium ions up to a voltage of 2 kV. A commercial 100 W RF generator creates a plasma inside a Pyrex tube, with a density between 1015 and 1016 m-3 and an electron temperature up to 15 eV. Three multi-aperture grids in accel-decel configuration extract and accelerate the ions, which are measured with a Faraday cup. We present in this paper the characterization of the ion source and its first operation, showing that it is suitable for the commissioning of the Allison scanner.
RESUMEN
Movable electrical probes were used to diagnose the beam flux profile and potential of ion beams since the early 1960s. Experimental measurements of beam plasmas can provide essential data related to the space charge neutralization, but the current-voltage characteristics obtained from such electrical probes are dominated by beam ion impact and ion-induced secondary emission. In this work, we present an analysis of the Langmuir characteristics obtained in a negative ion beam. We identify and discuss separately the contributions to the collected current given by secondary plasma ions and electrons, stripped electrons, beam ions, and ion-induced secondary electron emission. We present the beam plasma parameters obtained at different beam energies in NIO1.
RESUMEN
Vacuum systems of neutral beam injectors have very demanding requirements in terms of pumping speed, throughput, and capacity. Due to their high affinity to hydrogenic species, porous sintered Non-Evaporable Getters (NEG) are a possible candidate for deployment in giant hydrogen ion sources and neutral beam injectors for fusion. This paper presents the numerical interpretation of experimental tests on a recently developed NEG cartridge, that is part of a modular pump under development for neutral beam injectors. The cartridge is composed of six stacks of ZAO® porous sintered NEG disks and a heater. It was tested under hydrogen loads relevant for neutral beam injectors, namely, at constant pressure or constant flow, such that the hydrogen pressure was in the range of 20 mPa-40 mPa. The result of the sorption test was reproduced by a three dimensional flow simulation in molecular regime to determine the actual pumping speed, the effective sticking coefficient, and the uniformity of the gas load on the various NEG disks. The procedure developed and the results obtained provide the basic understanding for interpreting the large-scale tests on the modular pump, consisting of 34 of these cartridges.
RESUMEN
The cesium ovens for the prototype source of the ITER neutral beam injectors are currently tested in the CAesium Test Stand (CATS) facility, with a background pressure of 10-6 mbar. Different diagnostics are here installed: two Langmuir-Taylor detectors allow us to determine the Cs vapour evaporation rate from the oven and the Cs density at different positions in the vacuum chamber; and laser absorption spectroscopy is used to measure the density integrated over a line of sight and a quartz crystal microbalance to detect the cesium mass deposited in time over a surface. In this paper, we present a model to describe the dynamic equilibrium in the evaporation chamber of CATS with the first oven tested in order to gain information about the Cs sticking coefficient at the walls. The model hence includes sticking and energy accommodation of the Cs atoms to the walls, calculates the flux density at the surfaces, and provides the Cs atom density at any location in the volume. By this model, we simulate the Cs evaporation and the equilibrium density, comparing the modeled results with the experimental data. As a result, a sticking coefficient of 2% is obtained.
RESUMEN
The NIO1 (Negative Ion Optimization phase 1) source can provide continuous beam operation, which is convenient for systematic parameter and equipment studies. Even in the pure volume production regime, the source yield was found to depend on conditioning procedures. Magnetic configuration tests continued adding magnets to the existing setup; the filter field component Bx has been progressively extended to span the -12 to 5 mT range, and as a trend, source performances improved with |Bx|. The progress of camera beam diagnostics and of the quality of the volume-produced H- beam is also shown. The status, off-line results, and reliability of a first NIO1 cesium oven are discussed; other upgrades in preparation (cavity ring down spectrometer, the end calorimeter, and conceptual tests of the energy recovery system) are also listed.
RESUMEN
The next fusion project DEMO, which will be the evolution of the experimental fusion reactor [International Tokamak Experimental Reactor (ITER)], would require a high efficient energy production. As in ITER, DEMO will use fast Neutral Beam (NB) injectors to increase the plasma temperature needed for the fusion reaction. A way to recover the electric energy production efficiency in DEMO could be the beam energy recovery in the NB production, which is produced by a D- beam, neutralized by a gas cell with 60% efficiency. A compact energy recovery device with an axisymmetric cylindrical ion collector that uses only decelerating electric fields combined with the beam space charge effect has been recently proposed. It can be used for a test on the beam of the NIO1 (Negative Ion Optimization 1) source, a compact ion source (scaled down from ITER size sources) that has been developed at INFN-LNL and Consorzio RFX (Padua). The detailed collector design to be used on one of the beamlets of the NIO1 source within typical space limitation is presented and discussed here. Furthermore, a preliminary trajectory simulation for a beam with a rectangular geometry similar to the beam used in ITER to verify the beam recovery for a nonaxial symmetric geometry is also shown.
RESUMEN
In multiaperture electrostatic accelerators of negative ion sources, the plasma discharge is sustained by injecting gas in the plasma source, in a dynamic equilibrium with the gas flowing out through the accelerator. In this work, we present a three-dimensional numerical simulation of the gas flow inside the accelerator system of the large negative ion source ELISE at Max-Planck-Institut für Plasmaphysik Garching. ELISE has 640 apertures per electrode and lateral gaps between the electrode support structures that also contribute to the total gas conductance. Assuming molecular regime, we estimated the gas conductance, the gas density profile along the path of the ion beams from upstream of the plasma grid to downstream of the ground grid, and the transverse nonuniformities in the accelerator. The simulation included the most relevant geometrical features, while the results are compared to analytical results.
RESUMEN
OBJECTIVE: Ovarian cysts are relatively common prenatal findings in female fetuses. The aim of this study is to evaluate the ability of antenatal ultrasound in predicting spontaneous regression or a need for surgery. DESIGN: All cases of fetal ovarian cysts treated in our Department between 2007 and 2016 were included. Patients underwent a sonographic monitoring in utero and after birth until spontaneous or surgical resolution. Subjects were divided into two groups according to their postnatal management. Receiver-operating characteristics (ROC) curves were used to test the predictive ability for postnatal surgery of the cyst's mean and maximum diameters; their optimal cut off points were also determined. RESULTS: 38 cases of antenatally-detected fetal ovarian cysts were included. 12/38 cases underwent surgery (Group A). 26/38 cases were resolved spontaneously (Group B). Cyst size of those which were surgically excised significantly differed from those that regressed spontaneously. ROC curve pointed to 45âmm and 47âmm as optimal cut off points for the mean and the maximum cystic diameters, respectively. CONCLUSIONS: Cyst size and echo-structure seemed good predictors for prognosis after birth. The optimal cut off points of the cysts mean and maximum diameters in predicting postnatal surgery have been identified as 45âmm and 47âmm, respectively.
Asunto(s)
Quistes Ováricos/diagnóstico por imagen , Ultrasonografía Prenatal , Estudios de Casos y Controles , Estudios de Cohortes , Femenino , Humanos , Recién Nacido , Quistes Ováricos/cirugía , Embarazo , Pronóstico , Remisión EspontáneaAsunto(s)
Enfermedades Fetales/diagnóstico por imagen , Eminencia Media/anomalías , Malformaciones del Sistema Nervioso/diagnóstico por imagen , Diagnóstico Prenatal/métodos , Ultrasonografía Prenatal/métodos , Aborto Inducido/métodos , Adulto , Diagnóstico , Femenino , Humanos , Imagen por Resonancia Magnética/métodos , Eminencia Media/diagnóstico por imagen , Eminencia Media/patología , Malformaciones del Sistema Nervioso/embriología , Malformaciones del Sistema Nervioso/patología , EmbarazoRESUMEN
Injection of high energy neutral beam particles will be used in the ITER experiment for plasma heating and current drive. In a ITER heating beam injector, a 40 MW electrostatically accelerated negative beam will be neutralised and filtered along the beamline, obtaining a nominal 16.5 MW neutral beam power to be injected in the tokamak plasma or intercepted during conditioning and commissioning. The beam will heat the actively cooled panels of the beamline components with up to 13 MW/m2 surface power density and 18 MW power. These extreme conditions require testing in a ITER full scale neutral beam test facility under construction in Padova where the temperature of the beamline components will be monitored by 610 embedded thermocouples for protection against critical conditions, for recognising beam conditioning, and for deriving beam parameters. Power density maps of the expected beam-component interactions are applied on a parametric non-linear finite element model to simulate fields of expected temperatures. Such thermal maps are analyzed to derive the beam parameters during operation: divergence of 3-7 mrad and misalignment of 0-3 mrad. The sensibility of the temperature measurements is discussed considering a minimum 10% fraction of the nominal beam power.
RESUMEN
A survey of maize fields was conducted in northeast Italy from 1986 to 2014, resulting in a dataset of 1296 records including information on wireworm damage to maize, plant-attacking species, agronomic characteristics, landscape and climate. Three wireworm species, Agriotes brevis Candeze, A. sordidus Illiger and A. ustulatus Schäller, were identified as the dominant pest species in maize fields. Over the 29-year period surveyed, no yield reduction was observed when wireworm plant damage was below 15 % of the stand. A preliminary univariate analysis of risk assessment was applied to identify the main factors influencing the occurrence of damage. A multifactorial model was then applied by using the significant factors identified. This model allowed the research to highlight the strongest factors and to analyse how the main factors together influenced damage risk. The strongest factors were: A. brevis as prevalent damaging species, soil organic matter content >5 %, rotation including meadows and/or double crops, A. sordidus as prevalent damaging species, and surrounding landscape mainly meadows, uncultivated grass and double crops. The multifactorial model also showed how the simultaneous occurrence of two or more of the aforementioned risk factors can conspicuously increase the risk of wireworm damage to maize crops, while the probability of damage to a field with no-risk factors is always low (<1 %). These results make it possible to draw risk maps to identify low-risk and high-risk areas, a first step in implementing bespoke IPM procedures in an attempt to reduce the impact of soil insecticides significantly.
Asunto(s)
Escarabajos/efectos de los fármacos , Control de Insectos/métodos , Insecticidas/análisis , Contaminantes del Suelo/análisis , Zea mays/crecimiento & desarrollo , Animales , Clima , Productos Agrícolas/crecimiento & desarrollo , Italia , Medición de Riesgo , Estaciones del Año , Suelo/químicaRESUMEN
Embedded sensors have been designed for installation on the components of the MITICA beamline, the prototype ITER neutral beam injector (Megavolt ITER Injector and Concept Advancement), to derive characteristics of the particle beam and to monitor the component conditions during operation for protection and thermal control. Along the beamline, the components interacting with the particle beam are the neutralizer, the residual ion dump, and the calorimeter. The design and the positioning of sensors on each component have been developed considering the expected beam-surface interaction including non-ideal and off-normal conditions. The arrangement of the following instrumentation is presented: thermal sensors, strain gages, electrostatic probes including secondary emission detectors, grounding shunt for electrical currents, and accelerometers.
RESUMEN
In high power neutral beams for fusion, beam uniformity is an important figure of merit. Knowing the transverse power profile is essential during the initial phases of beam source operation, such as those expected for the ITER heating neutral beam (HNB) test facility. To measure it a diagnostic technique is proposed, based on the collection of secondary electrons generated by beam-surface and beam-gas interactions, by an array of positively biased collectors placed behind the calorimeter tubes. This measurement showed in the IREK test stand good proportionality to the primary beam current. To investigate the diagnostic performances in different conditions, we developed a numerical model of secondary electron emission, induced by beam particle impact on the copper tubes, and reproducing the cascade of secondary emission caused by successive electron impacts. The model is first validated against IREK measurements. It is then applied to the HNB case, to assess the locality of the measurement, the proportionality to the beam current density, and the influence of beam plasma.
RESUMEN
The beam power produced by the negative ion source for the production of ion of deuterium extracted from RF plasma is mainly absorbed by the beam dump component which has been designed also for measuring the temperatures on the dumping panels for beam diagnostics. A finite element code has been developed to characterize, by thermo-hydraulic analysis, the sensitivity of the beam dump to the different beam parameters. The results prove the capability of diagnosing the beam divergence and the horizontal misalignment, while the entity of the halo fraction appears hardly detectable without considering the other foreseen diagnostics like tomography and beam emission spectroscopy.
RESUMEN
BACKGROUND: Clinical and pathological parameters of patients with epithelial ovarian cancer (EOC) do not thoroughly predict patients' outcome. Despite the good outcome of stage I EOC compared with that of stages III and IV, the risk assessment and treatments are almost the same. However, only 20% of stage I EOC cases relapse and die, meaning that only a proportion of patients need intensive treatment and closer follow-up. Thus, the identification of cell mechanisms that could improve outcome prediction and rationalize therapeutic options is an urgent need in the clinical practice. PATIENTS AND METHODS: We have gathered together 203 patients with stage I EOC diagnosis, from whom snap-frozen tumor biopsies were available at the time of primary surgery before any treatment. Patients, with a median follow-up of 7 years, were stratified into a training set and a validation set. RESULTS AND CONCLUSIONS: Integrated analysis of miRNA and gene expression profiles allowed to identify a prognostic cell pathway, composed of 16 miRNAs and 10 genes, wiring the cell cycle, 'Activins/Inhibins' and 'Hedgehog' signaling pathways. Once validated by an independent technique, all the elements of the circuit resulted associated with overall survival (OS) and progression-free survival (PFS), in both univariate and multivariate models. For each patient, the circuit expressions have been translated into an activation state index (integrated signature classifier, ISC), used to stratify patients into classes of risk. This prediction reaches the 89.7% of sensitivity and 96.6% of specificity for the detection of PFS events. The prognostic value was then confirmed in the external independent validation set in which the PFS events are predicted with 75% sensitivity and 94.7% specificity. Moreover, the ISC shows higher classification performance than conventional clinical classifiers. Thus, the identified circuit enhances the understanding of the molecular mechanisms lagging behind stage I EOC and the ISC improves our capabilities to assess, at the time of diagnosis, the patient risk of relapse.
Asunto(s)
Biomarcadores de Tumor/genética , Regulación Neoplásica de la Expresión Génica/genética , Neoplasias Glandulares y Epiteliales/genética , Neoplasias Ováricas/genética , Pronóstico , Adulto , Anciano , Carcinoma Epitelial de Ovario , Supervivencia sin Enfermedad , Femenino , Humanos , MicroARNs/genética , Análisis por Micromatrices , Persona de Mediana Edad , Proteínas de Neoplasias/genética , Estadificación de Neoplasias , Neoplasias Glandulares y Epiteliales/patología , Neoplasias Ováricas/patologíaRESUMEN
Particle-wall interactions determine in different ways the operating conditions of plasma sources, ion accelerators, and beams operating in vacuum. For instance, a contribution to gas heating is given by ion neutralization at walls; beam losses and stray particle production-detrimental for high current negative ion systems such as beam sources for fusion-are caused by collisional processes with residual gas, with the gas density profile that is determined by the scattering of neutral particles at the walls. This paper shows that Molecular Dynamics (MD) studies at the nano-scale can provide accommodation parameters for gas-wall interactions, such as the momentum accommodation coefficient and energy accommodation coefficient: in non-isothermal flows (such as the neutral gas in the accelerator, coming from the plasma source), these affect the gas density gradients and influence efficiency and losses in particular of negative ion accelerators. For ideal surfaces, the computation also provides the angular distribution of scattered particles. Classical MD method has been applied to the case of diatomic hydrogen molecules. Single collision events, against a frozen wall or a fully thermal lattice, have been simulated by using probe molecules. Different modelling approximations are compared.