RESUMEN
Electric plasma assisted pyrolysis of methane represents a highly promising greener alternative to produce ethylene from biogas and renewable energies compared to conventional steam cracking of naphtha. The mediocre performance of typical Pd-Ag catalysts for the downstream purification of the substantially higher concentrated acetylene impurities (≥ 15 vol.-%) in those ethylene streams via selective hydrogenation is yet limiting economic interest. Following the concept of solid catalysts with ionic liquid layer (SCILL), we have modified an intrinsically non-selective palladium catalyst with imidazolium based ionic liquids varying among 10 different anions and investigated them in this reaction. The best performing [C4C1IM][MeSO4]-SCILL reaches an outstanding average ethylene selectivity over 20 h on-stream of 82% at full acetylene conversion without any sign of deactivation, clearly outperforming conventional Pd-Ag catalysts. By varying parameters like ionic liquid (IL) loading, temperature, feed gas composition, cations, and by using XPS for surface analysis we could gain a very comprehensive understanding of the underlying mechanisms that reduce the competing over-hydrogenation and oligomerisation side-reactions.
RESUMEN
Ammonia synthesis holds significant importance for both agricultural fertilizer production and emerging green energy applications. Here, we present a comprehensive characterization of a catalyst for mechanochemical ammonia synthesis, based on Cs-promoted Fe. The study sheds light on the catalyst's dynamic evolution under reaction conditions and the origin of deactivation. Initially, elemental Cs converts to CsH, followed by partial CsOH formation due to trace oxygen impurities on the surface of the Fe metal and the equipment. Concurrently, the mechanical milling process comminutes Fe, exposing fresh metallic Fe surfaces. This comminution correlates with an induction period observed during ammonia formation. Critical to the study, degradation of active Cs promoter species (CsH and CsNH2) into inactive CsOH emerged as the primary deactivation mechanism. By increasing the Cs content from 2.2â mol % to 4.2â mol %, we achieved stable, continuous ammonia synthesis for nearly 90â hours, showcasing one of the longest-running mechanocatalytic gas phase reactions. Studies of the temperature dependence of the reaction revealed negligible bulk temperature influence in the range of -10 °C to 100 °C, highlighting the dominance of mechanical action over bulk thermal effects. This study offers insights into the complex interplay between mechanical processing, reactive species, and deactivation mechanisms in mechanocatalytic ammonia synthesis.
RESUMEN
Increasing the resistance of catalysts against electrochemical degradation is one of the key requirements for the wider use of Proton Exchange Membrane Fuel Cells (PEMFCs). Here, we study the degradation of one entity of a highly stable catalyst, Pt@HGS, on a nanoelectrode under accelerated mass transport conditions. We find that the catalyst degrades more rapidly than expected based on previous ensemble measurements. Corroborated by identical location transmission electron microscopy and catalyst layer experiments, we deduce that locally different pH values are likely the reason for this difference in stability. Ultimately, this work provides insights into the actual conditions present in a PEMFC and raises questions about the applicability of accelerated stress tests usually performed to evaluate catalyst stability, particularly when they are performed in half-cell setups under inert gas.
RESUMEN
The conversion of carbon-based solids, like non-recyclable plastics, biomass, and coal, into small molecules appears attractive from different points of view. However, the strong carbon-carbon bonds in these substances pose a severe obstacle, and thus-if such reactions are possible at all-high temperatures are required1-5. The Bergius process for coal conversion to hydrocarbons requires temperatures above 450 °C6, pyrolysis of different polymers to pyrolysis oil is also typically carried out at similar temperatures7,8. We have now discovered that efficient hydrogenation of different solid substrates with the carbon-based backbone to light hydrocarbons can be achieved at room temperature by ball milling. This mechanocatalytic method is surprisingly effective for a broad range of different carbon substrates, including even diamond. The reaction is found to proceed via a radical mechanism, as demonstrated by reactions in the presence of radical scavengers. This finding also adds to the currently limited knowledge in understanding mechanisms of reactions induced by ball milling. The results, guided by the insight into the mechanism, could induce more extended exploration to broaden the application scope and help to address the problem of plastic waste by a mechanocatalytic approach.
RESUMEN
Nanoporous carbons are very attractive for various applications including energy storage. Templating methods with assembled amphiphilic molecules or porous inorganic templates are typically used for the synthesis. Amongst the different members of this family, CMK-5-like structures that are constructed to consist of sub-10 nm amorphous carbon nanotubes and ultrahigh specific surface area due to their thin pore walls, have the best properties in various respects. However, the fabrication of such hollow-structured mesoporous carbons entails elaborately tailoring the surface properties of the template pore walls and selecting specific carbon precursors. Thus, very limited cases are successful. Herein, a versatile and general silanol-assisted surface-casting method to create hollow-structured mesoporous carbons and heteroatom-doped derivatives with numerous organic molecules (e.g., furfuryl alcohol, resol, 2-thiophene methanol, dopamine, tyrosine) and different structural templates is reported. These carbon materials exhibit ultrahigh surface area (2400 m2 g-1 ), large pore volume (4.0 cm3 g-1 ), as well as satisfactory lithium-storage capacity (1460 mAh g-1 at 0.1 A g-1 ), excellent rate capability (320 mAh g-1 at 5 A g-1 ), and very outstanding cycling performance (2000 cycles at 5 A g-1 ).
RESUMEN
Hydrogen generated in electrolyzers is discussed as a key element in future energy scenarios, but oxygen evolution as the standard anode reaction is a complex multi-step reaction requiring a high overpotential. At the same time,it does not add value-the oxygen is typically released into the atmosphere. Alternative anode reactions which can proceed at similar current densities as the hydrogen evolution are, therefore, of highest interest. We have discovered a high-performance electrode based on earth-abundant elements synthesized in the presence of H2 O2 , which is able to sustain current densities of close to 1â A cm-2 for the oxidation of many organic molecules, which are partly needed at high production volumes. Such anode reactions could generate additional revenue streams, which help to solve one of the most important problems in the transition to renewable energy systems, i.e. the cost of hydrogen electrolysis.
RESUMEN
Catalysis is involved in around 85 % of manufacturing industry and contributes an estimated 25 % to the global domestic product, with the majority of the processes relying on heterogeneous catalysis. Despite the importance in different global segments, the fundamental understanding of heterogeneously catalysed processes lags substantially behind that achieved in other fields. The newly established Max Planck-Cardiff Centre on the Fundamentals of Heterogeneous Catalysis (FUNCAT) targets innovative concepts that could contribute to the scientific developments needed in the research field to achieve net zero greenhouse gas emissions in the chemical industries. This Viewpoint Article presents some of our research activities and visions on the current and future challenges of heterogeneous catalysis regarding green industry and the circular economy by focusing explicitly on critical processes. Namely, hydrogen production, ammonia synthesis, and carbon dioxide reduction, along with new aspects of acetylene chemistry.
RESUMEN
The direct sulfonation of methane to methanesulfonic acid was achieved in an electrochemical reactor without adding peroxide initiators. The synthesis proceeds only from oleum and methane. This is possible due to in situ formation of an initiating species from the electrolyte at a boron-doped diamond anode. Elevated pressure, moderate temperature and suitable current density are beneficial to reach high concentration at outstanding selectivity. The highest concentration of 3.7â M (approximately 62 % yield) at 97 % selectivity was reached with a stepped electric current program at 6.25-12.5â mA cm-2 , 70 °C and 90â bar methane pressure in 22â hours. We present a novel, electrochemical method to produce methanesulfonic acid, propose a reaction mechanism and show general dependencies between parameters and yields for methanesulfonic acid.
RESUMEN
Ball milling is growing increasingly important as an alternative synthetic tool to prepare catalytic materials. It was recently observed that supported metal catalysts could be directly obtained upon ball milling from the coarse powders of metal and oxide support. Moreover, when two compatible metal sources are simultaneously subjected to the mechanochemical treatment, bimetallic nanoparticles are obtained. A systematic investigation was extended to different metals and supports to understand better the mechanisms involved in the comminution and alloying of metal nanoparticles. Based on this, a model describing the role of metal-support interactions in the synthesis was developed. The findings will be helpful for the future rational design of supported metal catalysts via dry ball milling.
RESUMEN
The present review details a chronological description of the events that took place during the development of mesoporous materials, their different synthetic routes and their use as drug delivery systems. The outstanding textural properties of these materials quickly inspired their translation to the nanoscale dimension leading to mesoporous silica nanoparticles (MSNs). The different aspects of introducing pharmaceutical agents into the pores of these nanocarriers, together with their possible biodistribution and clearance routes, would be described here. The development of smart nanocarriers that are able to release a high local concentration of the therapeutic cargo on-demand after the application of certain stimuli would be reviewed here, together with their ability to deliver the therapeutic cargo to precise locations in the body. The huge progress in the design and development of MSNs for biomedical applications, including the potential treatment of different diseases, during the last 20 years will be collated here, together with the required work that still needs to be done to achieve the clinical translation of these materials. This review was conceived to stand out from past reports since it aims to tell the story of the development of mesoporous materials and their use as drug delivery systems by some of the story makers, who could be considered to be among the pioneers in this area.
Asunto(s)
Nanopartículas , Dióxido de Silicio , Portadores de Fármacos , Sistemas de Liberación de Medicamentos/métodos , Nanopartículas/uso terapéutico , Porosidad , Distribución TisularRESUMEN
Aluminum oxides, oxyhydroxides, and hydroxides are important in different fields of application due to their many attractive properties. However, among these materials, tohdite (5Al2O3·H2O) is probably the least known because of the harsh conditions required for its synthesis. Herein, we report a straightforward methodology to synthesize tohdite nanopowders (particle diameter â¼13 nm, specific surface area â¼102 m2 g-1) via the mechanochemically induced dehydration of boehmite (γ-AlOOH). High tohdite content (about 80%) is achieved upon mild ball milling (400 rpm for 48 h in a planetary ball mill) without process control agents. The addition of AlF3 can promote the crystallization of tohdite by preventing the formation of the most stable α-Al2O3, resulting in the formation of almost phase-pure tohdite. The availability of easily accessible tohdite samples allowed comprehensive characterization by powder X-ray diffraction, total scattering analysis, solid-state NMR (1H and 27Al), N2-sorption, electron microscopy, and simultaneous thermal analysis (TG-DSC). Thermal stability evaluation of the samples combined with structural characterization evidenced a low-temperature transformation sequence: 5Al2O3·H2O â κ-Al2O3 â α-Al2O3. Surface characterization via DRIFTS, ATR-FTIR, D/H exchange experiments, pyridine-FTIR, and NH3-TPD provided further insights into the material properties.
RESUMEN
Ammonia synthesis via the high-temperature and high-pressure Haber-Bosch process is one of the most important chemical processes in the world. In spite of numerous attempts over the last 100â years, continuous Haber-Bosch type ammonia synthesis at room-temperature had not been possible, yet. We report the development of a mechanocatalytic system operating continuously at room-temperature and at pressures down to 1â bar. With optimized experimental conditions, a cesium-promoted iron catalyst was shown to produce ammonia at concentrations of more than 0.2â vol. % for over 50â hours.
RESUMEN
Sheet silicates, also known as phyllosilicates, contain parallel sheets of tetrahedral silicate built up by [Si2O5]2- entities connected through intermediate metal-oxygen octahedral layers. The well-known minerals talc and pyrophyllite are belonging to this group based on magnesium and aluminium, respectively. Surprisingly, the ferric analogue rarely occurs in nature and is found in mixtures and conglomerates with other materials only. While partial incorporation of iron into pyrophyllites has been achieved, no synthetic protocol for purely iron-based pyrophyllite has been published yet. Here we report about the first artificial synthesis of ferripyrophyllite under exceptional mild conditions. A similar ultrathin two-dimensional (2D) nanosheet morphology is obtained as in talc or pyrophyllite but with iron(iii) as a central metal. The high surface material exhibits a remarkably high thermostability. It shows some catalytic activity in ammonia synthesis and can serve as catalyst support material for noble metal nanoparticles.
RESUMEN
Electrochemical oxidation of biomass substrates to valuable bio-chemicals is highly attractive. However, the design of efficient, selective, stable, and inexpensive electrocatalysts remains challenging. Here it is reported how a 3D highly ordered mesoporous Co3 O4 /nickel foam (om-Co3 O4 /NF) electrode fulfils those criteria in the electrochemical oxidation of 5-hydroxymethylfurfural (HMF) to value-added 2,5-furandicarboxylic acid (FDCA). Full conversion of HMF and an FDCA yield of >99.8 % are achieved with a faradaic efficiency close to 100 % at a potential of 1.457â V vs. reversible hydrogen electrode. Such activity and selectivity to FDCA are attributed to the fast electron transfer, high electrochemical surface area, and reduced charge transfer resistance. More impressively, remarkable catalyst stability under long-term testing is obtained with 17 catalytic cycles. This work highlights the rational design of metal oxides with ordered meso-structures for electrochemical biomass conversion.
RESUMEN
The mechanochemical synthesis of nanomaterials for catalytic applications is a growing research field due to its simplicity, scalability, and eco-friendliness. Besides, it provides materials with distinct features, such as nanocrystallinity, high defect concentration, and close interaction of the components in a system, which are, in most cases, unattainable by conventional routes. Consequently, this research field has recently become highly popular, particularly for the preparation of catalytic materials for various applications, ranging from chemical production over energy conversion catalysis to environmental protection. In this Review, recent studies on mechanochemistry for the synthesis of catalytic materials are discussed. Emphasis is placed on the straightforwardness of the mechanochemical route-in contrast to more conventional synthesis-in fabricating the materials, which otherwise often require harsh conditions. Distinct material properties achieved by mechanochemistry are related to their improved catalytic performance.
RESUMEN
The present study describes an interesting and practical catalytic system that allows flexible conversion of lignin into aromatic or aliphatic hydrocarbons, depending on the hydrogen partial pressure. A combination of experiment and theory shows that the product distribution between aromatics and aliphatics can be simply tuned by controlling the availability of hydrogen on the catalyst surface. Noticeably, these pathways lead to almost complete oxygen removal from lignin biomass, yielding high-quality hydrocarbons. Thus, hydrogen-lignin co-refining by using this catalytic system provides high flexibility in hydrogen storage/consumption towards meeting different regional and temporal demands.
RESUMEN
Direct valorization of ethane, a substantial component of shale gas deposits, at mild conditions remains a significant challenge, both from an industrial and an academic point of view. Herein, we report iodine as an efficient and selective catalyst for the functionalization of ethane in oleum at low temperatures and pressures. A thorough study of relevant reaction parameters revealed iodine to be remarkably more active than the previously reported "Periana/Catalytica" catalyst under optimized conditions. As a result of a fundamentally different catalytic cycle, iodine yields the bis-bisulfate ester of ethylene glycol (HO3SO-CH2-CH2-OSO3H, EBS), whereas for state-of-the-art platinum-based catalysts ethionic acid (HO3S-CH2-CH2-OSO3H, ETA) is obtained as the main product. Our findings open up an attractive route for the direct conversion of ethane toward ethylene glycol.
RESUMEN
Zeolites are becoming more versatile in their chemical functions through rational design of their frameworks. Therefore, direct imaging of all atoms at the atomic scale, basic units (Si, Al, and O), heteroatoms in the framework, and extra-framework cations, is needed. TEM provides local information at the atomic level, but the serious problem of electron-beam damage needs to be overcome. Herein, all framework atoms, including oxygen and most of the extra-framework Na cations, are successfully observed in one of the most electron-beam-sensitive and lowest framework density zeolites, Na-LTA. Zeolite performance, for instance in catalysis, is highly dependent on the location of incorporated heteroatoms. Fe single atomic sites in the MFI framework have been imaged for the first time. The approach presented here, combining image analysis, electron diffraction, and DFT calculations, can provide essential structural keys for tuning catalytically active sites at the atomic level.
RESUMEN
Li et al commented that our report claims that methods reported thus far cannot enable the production of high-purity corundum with surface areas greater than 100 m2 g-1, and that our obtained material could be porous aggregates rather than nanoparticles. We disagree with both of these suggestions.
RESUMEN
On August 23, 2019 Walter Thiel passed away suddenly and unexpectedly. Thiel was a giant in the field of Theoretical Chemistry and has left deep marks as an outstanding scientist and as a wonderful human being. With Walter Thiel, the scientific community has lost a visionary scientific leader and an important voice of reason.