Effects of Oxygen-Containing Functional Groups on Supercapacitor Performance.

Molecular dynamics (MD) simulations of the interface between graphene and the ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate (BMIM OTf) were carried out to gain molecular-level insights into the performance of graphene-based supercapacitors and, in particular, determine the effects of the presence of oxygen-containing defects at the graphene surface on their integral capacitance. The MD simulations predict that increasing the surface coverage of hydroxyl groups negatively affects the integral capacitance, whereas the effect of the presence of epoxy groups is much less significant. The calculated variations in capacitance are found to be directly correlated to the interfacial structure. Indeed, hydrogen bonding between hydroxyl groups and SO3 moieties prevents BMIM(+) and OTf(-) ions from interacting favorably in the interfacial layer and restrains the orientation and mobility of OTf(-) ions, thereby reducing the interfacial permittivity of the ionic liquid. The results of the simulations can facilitate the rational design of electrode materials for supercapacitors.

Tuning the optical properties of mesoporous TiO2 films by nanoscale engineering.

The optical properties of spin-coated titanium dioxide films have been tuned by introducing mesoscale pores into the inorganic matrix. Differently sized pores were templated using Pluronic triblock copolymers as surfactants in the sol-gel precursor solutions and adjusted by varying the process parameters, such as the polymer concentration, annealing temperature, and time. The change in refractive index observed for different mesoporous anatase films annealed at 350, 400, or 450 °C directly correlates with changes in the pore size. Additionally, the index of refraction is influenced by the film thickness and the density of pores within the films. The band gap of these films is blue-shifted, presumably due to stress the introduction of pores exerts on the inorganic matrix. This study focused on elucidating the effect different templating materials (Pluronic F127 and P123) have on the pore size of the final mesoporous titania film and on understanding the relation of varying the polymer concentration (taking P123 as an example) in the sol-gel solution to the pore density and size in the resultant titania film. Titania thin film samples or corresponding titanium dioxide powders were characterized by X-ray diffraction, cross-section transmission electron microscopy, nitrogen adsorption, ellipsometery, UV/vis spectrometry, and other techniques to understand the interplay between mesoporosity and optical properties.

Evolutionary selection of enzymatically synthesized semiconductors from biomimetic mineralization vesicles.

The way nature evolves and sculpts materials using proteins inspires new approaches to materials engineering but is still not completely understood. Here, we present a cell-free synthetic biological platform to advance studies of biologically synthesized solid-state materials. This platform is capable of simultaneously exerting many of the hierarchical levels of control found in natural biomineralization, including genetic, chemical, spatial, structural, and morphological control, while supporting the evolutionary selection of new mineralizing proteins and the corresponding genetically encoded materials that they produce. DNA-directed protein expression and enzymatic mineralization occur on polystyrene microbeads in water-in-oil emulsions, yielding synthetic surrogates of biomineralizing cells that are then screened by flow sorting, with light-scattering signals used to sort the resulting mineralized composites differentially. We demonstrate the utility of this platform by evolutionarily selecting newly identified silicateins, biomineralizing enzymes previously identified from the silica skeleton of a marine sponge, for enzyme variants capable of synthesizing silicon dioxide (silica) or titanium dioxide (titania) composites. Mineral composites of intermediate strength are preferentially selected to remain intact for identification during cell sorting, and then to collapse postsorting to expose the encoding genes for enzymatic DNA amplification. Some of the newly selected silicatein variants catalyze the formation of crystalline silicates, whereas the parent silicateins lack this ability. The demonstrated bioengineered route to previously undescribed materials introduces in vitro enzyme selection as a viable strategy for mimicking genetic evolution of materials as it occurs in nature.

Sodium ion insertion in hollow carbon nanowires for battery applications.

Hollow carbon nanowires (HCNWs) were prepared through pyrolyzation of a hollow polyaniline nanowire precursor. The HCNWs used as anode material for Na-ion batteries deliver a high reversible capacity of 251 mAh g(-1) and 82.2% capacity retention over 400 charge-discharge cycles between 1.2 and 0.01 V (vs Na(+)/Na) at a constant current of 50 mA g(-1) (0.2 C). Excellent cycling stability is also observed at an even higher charge-discharge rate. A high reversible capacity of 149 mAh g(-1) also can be obtained at a current rate of 500 mA g(-1) (2C). The good Na-ion insertion property is attributed to the short diffusion distance in the HCNWs and the large interlayer distance (0.37 nm) between the graphitic sheets, which agrees with the interlayered distance predicted by theoretical calculations to enable Na-ion insertion in carbon materials.

Selective metal cation capture by soft anionic metal-organic frameworks via drastic single-crystal-to-single-crystal transformations.

Flexible anionic metal-organic frameworks (MOFs) are transformed into neutral heterobimetallic systems via single-crystal-to-single-crystal processes invoked by cation insertion. These transformations are directed by cooperative bond breakage and formation, resulting in expansion or contraction of the 3D framework by up to 33% due to the flexible nature of the organic linker. These MOFs displays highly selective uptake of divalent transition-metal cations (e.g., Co(2+) and Ni(2+)) over alkali-metal cations (Li(+) and Na(+)).

A soft approach to encapsulate sulfur: polyaniline nanotubes for lithium-sulfur batteries with long cycle life.

A novel vulcanized polyaniline nanotube/sulfur composite was prepared successfully via an in situ vulcanization process by heating a mixture of polyaniline nanotube and sulfur at 280 °C. The electrode could retain a discharge capacity of 837 mAh g(-1) after 100 cycles at a 0.1 C rate and manifested 76% capacity retention up to 500 cycles at a 1 C rate.

Investigation of local environments in Nafion-SiO(2) composite membranes used in vanadium redox flow batteries.

Proton conducting polymer composite membranes are of technological interest in many energy devices such as fuel cells and redox flow batteries. In particular, polymer composite membranes, such as SiO(2) incorporated Nafion membranes, are recently reported as highly promising for the use in redox flow batteries. However, there is conflicting reports regarding the performance of this type of Nafion-SiO(2) composite membrane in the redox flow cell. This paper presents results of the analysis of the Nafion-SiO(2) composite membrane used in a vanadium redox flow battery by nuclear magnetic resonance (NMR) spectroscopy, X-ray photoelectron spectroscopy (XPS), Fourier Transform Infra Red (FTIR) spectroscopy, and ultraviolet-visible spectroscopy. The XPS study reveals the chemical identity and environment of vanadium cations accumulated at the surface. On the other hand, the (19)F and (29)Si NMR measurement explores the nature of the interaction between the silica particles, Nafion side chains and diffused vanadium cations. The (29)Si NMR shows that the silica particles interact via hydrogen bonds with the sulfonic groups of Nafion and the diffused vanadium cations. Based on these spectroscopic studies, the chemical environment of the silica particles inside the Nafion membrane and their interaction with diffusing vanadium cations during flow cell operations are discussed. This study discusses the origin of performance degradation of the Nafion-SiO(2) composite membrane materials in vanadium redox flow batteries.

Membrane development for vanadium redox flow batteries.

Large-scale energy storage has become the main bottleneck for increasing the percentage of renewable energy in our electricity grids. Redox flow batteries are considered to be among the best options for electricity storage in the megawatt range and large demonstration systems have already been installed. Although the full technological potential of these systems has not been reached yet, currently the main problem hindering more widespread commercialization is the high cost of redox flow batteries. Nafion, as the preferred membrane material, is responsible for about 11% of the overall cost of a 1 MW/8 MWh system. Therefore, in recent years two main membrane related research threads have emerged: 1) chemical and physical modification of Nafion membranes to optimize their properties with regard to vanadium redox flow battery (VRFB) application; and 2) replacement of the Nafion membranes with different, less expensive materials. This review summarizes the underlying basic scientific issues associated with membrane use in VRFBs and presents an overview of membrane-related research approaches aimed at improving the efficiency of VRFBs and making the technology cost-competitive. Promising research strategies and materials are identified and suggestions are provided on how materials issues could be overcome.

Cd(1-x)Zn(x)O [0.05 ≤x≤ 0.26] synthesized by vapor-diffusion induced hydrolysis and co-nucleation from aqueous metal salt solutions.

Nanoparticulate Cd(1-x)Zn(x)O (x = 0, 0.05-0.26, 1) is synthesized in a simple two-step synthesis approach. Vapor-diffusion induced catalytic hydrolysis of two molecular precursors at low temperature induces co-nucleation and polycondensation to produce bimetallic layered hydroxide salts (M = Cd, Zn) as precursor materials which are subsequently converted to Cd(1-x)Zn(x)O at 400 °C. Unlike ternary materials prepared by standard co-precipitation procedures, all products presented here containing < 30 mol% Zn(2+) ions are homogeneous in elemental composition on the micrometre scale. This measured compositional homogeneity within the samples, as determined by energy dispersive spectroscopy and inductively coupled plasma spectroscopy, is a testimony to the kinetic control achieved by employing slow hydrolysis conditions. In agreement with this observation, the optical properties of the materials obey Vegard's Law for a homogeneous solid solution of Cd(1-x)Zn(x)O, where x corresponds to the values determined by inductively coupled plasma analysis, even though powder X-ray diffraction shows phase separation into a cubic mixed metal oxide phase and a hexagonal ZnO phase at all doping levels.

Kinetic control of intralayer cobalt coordination in layered hydroxides: Co(1-0.5x)(oct) Co(x)(tet) (OH)2 (Cl)x (H2O)n.

We report the synthesis and characterization of new structural variants of the isotypic compound with the generic chemical formula, Co(1-0.5x)(oct) Co(x)(tet) (OH)2 (Cl)x (H2O)n, all modifications of an alpha-Co(OH)2 lattice. We show that the occupancy of tetrahedrally coordinated cobalt sites and associated chloride ligands, x, is modulated by the rate of formation of the respective layered hydroxide salts from kinetically controlled aqueous hydrolysis at an air-water interface. This new level of structural control is uniquely enabled by the slow diffusion of a hydrolytic catalyst, a simple technique. Independent structural characterizations of the compounds separately describe various attributes of the materials on different length scales, revealing details hidden by the disordered average structures. The precise control over the population of distinct octahedrally and tetrahedrally coordinated cobalt ions in the lattice provides a gentle, generic method for modulating the coordination geometry of cobalt in the material without disturbing the lattice or using additional reagents. A mechanism is proposed to reconcile the observation of the kinetic control of the structure with competing interactions during the initial stages of hydrolysis and condensation.

Nanostructured ZnS and CdS films synthesized using layered double hydroxide films as precursor and template.

Anion exchange reactions in layered double hydroxide films (M(OH)(2-x)(NO(3))(x).mH(2)O) followed by solid state conversion reactions are shown to yield micrometer-sized unsupported metal sulfide (M = Zn, Cd) films with unique textured morphologies. The characteristic three-dimensional nanostructured film morphology and crystallinity of the initial films are retained in the metal sulfide films although these conversion reactions involve anion exchanges concomitant with significant rearrangements of the crystal structures. Surface areas of 42 m(2)/g for zinc sulfide and 50 m(2)/g for cadmium sulfide thin films are observed. These values correspond to an increase in surface area of 75% for the Zn(5)(OH)(8)(NO(3))(2).2H(2)O to zinc sulfide conversion, while the cadmium sulfide films exhibit more than three times the surface area of their precursor material, Cd(OH)(NO(3)).H(2)O. The three-dimensional morphology of the resulting films is thus observed to combine the physical properties of the bulk materials with the advantages of higher surface areas typically associated with nanostructured or porous materials. The layered double hydroxide materials used in this study to provide both structural and chemical templates were prepared using the mild conditions of a biologically inspired vapor-diffusion catalytic synthesis.

Substrate-induced growth of nanostructured zinc oxide films at room temperature using concepts of biomimetic catalysis.

By kinetically controlled vapor-diffusion catalysis, nanostructured ZnO and Zn5(OH)8(NO3)3*2H2O thin films have been grown on substrates with different chemical compositions and varying degrees of crystallinity. The materials resulting from heterogeneous nucleation under mild conditions (starting from aqueous metal salt precursor solutions at room temperature) were characterized by X-ray diffraction and scanning electron microscopy to determine the influence of the substrates on the overall chemical composition, crystallinity, and morphology of the films.

Kinetically controlled catalytic formation of zinc oxide thin films at low temperature.

We developed a unique method to produce ZnO thin films by kinetically controlled catalytic hydrolysis of a molecular precursor at low temperature, operating in conjunction with the vectorial control of crystal growth. Using a system in which the diffusion of a volatile catalyst into a solution of molecular precursor of the metal oxide limits the rate of hydrolysis and establishes a gradient of catalyst concentration, we investigated the nucleation of textured nanoparticles at the gas-liquid interface and characterized their subsequent growth. Use of this slow diffusion method combined with prediction of molecular species using a partial charge model enables a higher level of organizational control than obtained in other low-temperature synthesis methods, without the use of organic molecules. Various metal oxides and their morphologies and chemical compositions can be tailored for specific applications using this relatively simple approach.