RESUMEN
The increasing networking of data systems in medicine is not only leading to modern interdisciplinarity in the sense of cooperation between different medical departments, but also poses new challenges regarding the building and room infrastructure. The surgical operating room of the future expands or augments its reality, away from the pure building characteristics, towards an intelligent and communicative space platform. The building infrastructure (operating theatre) serves as sensor and actuator. Thus, it is possible to inform about missing diagnostics as well as to register them directly in the contextualization of the planned surgical intervention or to integrate them into the processes. Integrated operating theatres represent a comprehensive computer platform based on a corresponding system architecture with software-based protocols. An underlying modular system consisting of various modules for image acquisition and analysis, interaction and visualization supports the integration and merging of heterogeneous data that are generated in a hospital operation. Integral building data (e.g., air conditioning, lighting control, device registration) are merged with patient-related data (age, type of illness, concomitant diseases, existing diagnostic CT and MRI images). New systems coming onto the market, as well as already existing systems will have to be measured by the extent to which they will be able to guarantee this integration of information-similar to the development from mobile phone to smartphone. Cost reduction should not be the only legitimizing argument for the market launch, but the vision of a new quality of surgical perception and action.
Asunto(s)
Cirugía General/tendencias , Humanos , Iluminación , Imagen por Resonancia Magnética , QuirófanosRESUMEN
Electromagnetic (EM) tracking allows localization of small EM sensors in a magnetic field of known geometry without line-of-sight. However, this technique requires a cable connection to the tracked object. A wireless alternative based on magnetic fields, referred to as transponder tracking, has been proposed by several authors. Although most of the transponder tracking systems are still in an early stage of development and not ready for clinical use yet, Varian Medical Systems Inc. (Palo Alto, California, USA) presented the Calypso system for tumor tracking in radiation therapy which includes transponder technology. But it has not been used for computer-assisted interventions (CAI) in general or been assessed for accuracy in a standardized manner, so far. In this study, we apply a standardized assessment protocol presented by Hummel et al (2005 Med. Phys. 32 2371-9) to the Calypso system for the first time. The results show that transponder tracking with the Calypso system provides a precision and accuracy below 1 mm in ideal clinical environments, which is comparable with other EM tracking systems. Similar to other systems the tracking accuracy was affected by metallic distortion, which led to errors of up to 3.2 mm. The potential of the wireless transponder tracking technology for use in many future CAI applications can be regarded as extremely high.
Asunto(s)
Fenómenos Electromagnéticos , Neoplasias/radioterapia , Fantasmas de Imagen , Telemetría/instrumentación , Telemetría/normas , Terapia Asistida por Computador/instrumentación , Terapia Asistida por Computador/normas , Calibración , Humanos , Neoplasias/patología , Terapia Asistida por Computador/métodosRESUMEN
Intra-operative imaging techniques for obtaining the shape and morphology of soft-tissue surfaces in vivo are a key enabling technology for advanced surgical systems. Different optical techniques for 3-D surface reconstruction in laparoscopy have been proposed, however, so far no quantitative and comparative validation has been performed. Furthermore, robustness of the methods to clinically important factors like smoke or bleeding has not yet been assessed. To address these issues, we have formed a joint international initiative with the aim of validating different state-of-the-art passive and active reconstruction methods in a comparative manner. In this comprehensive in vitro study, we investigated reconstruction accuracy using different organs with various shape and texture and also tested reconstruction robustness with respect to a number of factors like the pose of the endoscope as well as the amount of blood or smoke present in the scene. The study suggests complementary advantages of the different techniques with respect to accuracy, robustness, point density, hardware complexity and computation time. While reconstruction accuracy under ideal conditions was generally high, robustness is a remaining issue to be addressed. Future work should include sensor fusion and in vivo validation studies in a specific clinical context. To trigger further research in surface reconstruction, stereoscopic data of the study will be made publically available at www.open-CAS.com upon publication of the paper.
Asunto(s)
Imagenología Tridimensional/métodos , Laparoscopía/métodos , Cirugía Asistida por Computador/métodos , Animales , Endoscopios , Riñón/anatomía & histología , Riñón/cirugía , Hígado/anatomía & histología , Hígado/cirugía , Modelos Biológicos , Reproducibilidad de los Resultados , PorcinosRESUMEN
PURPOSE: Ultrasound (US) guided procedures are frequently performed for diagnosis and treatment of many diseases. However, there are safety and procedure duration limitations in US-guided interventions due to poor image quality and inadequate visibility of medical instruments in the field of view. To address this issue, we propose an interventional imaging system based on a mobile electromagnetic (EM) field generator (FG) attached to a US probe. METHODS: A standard US probe was integrated with an EM FG to allow combined movement of the FG with real-time imaging to achieve (1) increased tracking accuracy for medical instruments are located near the center of the tracking volume, (2) increased robustness because the FG is distant to large metallic objects, and (3) reduced setup complexity since time-consuming placement of the FG is not required. The new integrated US-FG imaging system was evaluated by assessing tracking and calibration accuracy in a clinical setting. To demonstrate clinical applicability, the prototype US-EMFG probe was tested in needle puncture procedures. RESULTS: The mobile EMFG attached to a US probe yielded sub-millimeter tracking accuracy despite the presence of metal close to the FG. Calibration errors were in the range of 1-2 mm. In an initial phantom study on US-guided needle punctures, targeting errors of about 3 mm were achieved. CONCLUSION: A combined US-EMFG probe is feasible and effective for tracking medical instruments relative to US images with high accuracy and robustness while keeping hardware complexity low.
Asunto(s)
Campos Electromagnéticos , Fantasmas de Imagen , Ultrasonografía Intervencional/métodos , Calibración , HumanosRESUMEN
PURPOSE: Intra-procedural acquisition of the patient anatomy is a key technique in the context of computer-assisted interventions (CAI). Ultrasound (US) offers major advantages as an interventional imaging modality because it is real time and low cost and does not expose the patient or physician to harmful radiation. To advance US-related research, the purpose of this paper was to develop and evaluate an open-source framework for US-based CAI applications. MATERIALS AND METHODS: We developed the open-source software module MITK-US for acquiring and processing US data as part of the well-known medical imaging interaction toolkit (MITK). To demonstrate its utility, we applied the module to implement a new concept for US-guided needle insertion. Performance of the US module was assessed by determining frame rate and latency for both a simple sample application and a more complex needle guidance system. RESULTS: MITK-US has successfully been used to implement both sample applications. Modern laptops achieve frame rates above 24 frames per second. Latency is measured to be approximately 250 ms or less. CONCLUSION: MITK-US can be considered a viable rapid prototyping environment for US-based CAI applications.
Asunto(s)
Fantasmas de Imagen , Cirugía Asistida por Computador/instrumentación , Ultrasonografía/instrumentación , Diseño de Equipo , Humanos , Programas InformáticosRESUMEN
Time-of-Flight (ToF) sensors have become a considerable alternative to conventional surface acquisition techniques such as laser range scanning and stereo vision. Application of ToF cameras for the purpose of intra-operative registration requires matching of the noisy surfaces generated from ToF range data onto pre-interventionally acquired high-resolution surfaces. The contribution of this paper is twofold: Firstly, we present a novel method for fine rigid registration of noisy ToF data with high-resolution surface meshes taking into account both, the noise characteristics of ToF cameras and the resolution of the target mesh. Secondly, we introduce an evaluation framework for assessing the performance of ToF registration methods based on physically realistic ToF range data generated from a virtual scence. According to experiments within the presented evaluation framework, the proposed method outperforms the standard ICP algorithm with respect to correspondence search and transformation computation, leading to a decrease in the target registration error (TRE) of more than 70%.
Asunto(s)
Algoritmos , Artefactos , Aumento de la Imagen/métodos , Interpretación de Imagen Asistida por Computador/métodos , Imagenología Tridimensional/métodos , Humanos , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
We present a novel approach to studying physical heart models by coupling them with virtual 3D representations in a mixed reality environment. The limitations of standalone physical models (non-interactive, static) are overcome by the corresponding virtual models, which in turn become more natural to interact with. The potential of this approach is exemplified by a setup which enables cardiac surgeons to interactively trace the mitral annulus, a part of the cardiac skeleton playing a vital role in mitral valve surgery. We present results of a pilot study and discuss ways of improving and extending the system. The described mixed reality environment could easily be adapted to other fields and thus has the potential to become a new tool for investigating 3D medical data.
Asunto(s)
Insuficiencia de la Válvula Mitral/cirugía , Cuidados Preoperatorios , Interfaz Usuario-Computador , Simulación por Computador , Humanos , Imagenología Tridimensional , Proyectos PilotoRESUMEN
In this study, we assessed the targeting precision of a previously reported needle-based soft tissue navigation system. For this purpose, we implanted 10 2-ml agar nodules into three pig livers as tumor models, and two of the authors used the navigation system to target the center of gravity of each nodule. In order to obtain a realistic setting, we mounted the livers onto a respiratory liver motion simulator that models the human body. For each targeting procedure, we simulated the liver biopsy workflow, consisting of four steps: preparation, trajectory planning, registration, and navigation. The lesions were successfully hit in all 20 trials. The final distance between the applicator tip and the center of gravity of the lesion was determined from control computed tomography (CT) scans and was 3.5 +/- 1.1 mm on average. Robust targeting precision of this order of magnitude would significantly improve the clinical treatment standard for various CT-guided minimally invasive interventions in the liver.