Durability of Concrete with Partial Replacement of Portland Cement by Incorporating Reactive Magnesium Oxide and Fly Ash.

In this research, the durability performance of sustainable concrete with the incorporation of reactive magnesium oxide (MgO) and fly ash (FA) was evaluated. The partial replacement of cement with these two materials is an appealing solution for the construction sector due to sustainability benefits and shrinkage reduction. The incorporation of FA by partial replacement of cement was carried out at 0%, 15% and 30%. The incorporation of MgO in concrete was carried out at 0%, 5%, 10% and 20%. Two types of MgO were used, one from Australia and another of Spanish origin. These two materials were evaluated in terms of their individual incorporation, and then an evaluation was carried out when the two were simultaneously used. In terms of durability, performance losses between 3% and 95% were obtained in all tests (water absorption by capillarity and immersion, carbonation depth and resistance to chloride penetration). However, over time, the difference in performance relative to the reference concrete tends to decrease due to the slow hydration that characterizes these two alternative materials. It was found that, in most of the tests, no overlapping of the negative effects occurred. In other words, the simultaneous incorporation of MgO and FA caused performance losses lower than the sum of the losses of their individual incorporation.

The Influence of Recycled Cement, Fly Ash, and Magnesium Oxide on the Mechanical Performance of Sustainable Cementitious Materials.

In the construction industry, cement is the most widely used material. So, to achieve greater sustainability in this industry, it is imperative to improve the sustainability of this material. One way to reduce the ecological footprint of cement is to replace it, even if partially, with other more sustainable materials that can act as binders. This paper analyses the mechanical properties of more sustainable mortars containing recycled cement (RC), fly ash (FA), and magnesium oxide (MgO). Different types of binary, ternary, and quaternary mortars were used: containing recycled cement (5% and 10%), fly ash (10% and 20%), and MgO (7.5% and 15%). An experimental campaign was carried out analysing air content, density, compressive and flexural strengths, modulus of elasticity, and ultrasonic pulse velocity. The ternary mortars showed decreases between 0.4% (M-5RC10FA) and 35.3% (M-10RC15Mg) in terms of compressive strength at 365 days (compared to RM), when the theoretically expected decrease (the sum of the decreases obtained with the individual incorporation of these materials) would be between 16.6% and 41.5%, respectively. The results obtained allow for concluding that the joint use of these materials in ternary mortars improves the mechanical capacity, relative to the individual incorporation of each material in binary mortars.