RESUMEN
While semiconductor nanocrystals provide versatile fluorescent materials for light-emitting devices, their brightness suffers from the "dark exciton"âan optically inactive electronic state into which nanocrystals relax before emitting. Recently, a theoretical mechanism, the Rashba effect, was discovered that can overcome this limitation by inverting the lowest-lying levels and creating a bright excitonic ground state. However, no methodology is available to systematically identify materials that exhibit this inversion, hindering the development of superbright nanocrystals and their devices. Here, based on a detailed understanding of the Rashba mechanism, we demonstrate a procedure that reveals previously unknown "bright-exciton" nanocrystals. We first define physical criteria to reduce over 500,000 known solids to 173 targets. Higher-level first-principles calculations then refine this list to 28 candidates. From these, we select five with high oscillator strength and develop effective-mass models to determine the nature of their lowest excitonic state. We confirm that four of the five solids yield bright ground-state excitons in nanocrystals. Thus, our results provide a badly needed roadmap for experimental investigation of bright-exciton nanomaterials.
RESUMEN
The brightness of an emitter is ultimately described by Fermi's golden rule, with a radiative rate proportional to its oscillator strength times the local density of photonic states. As the oscillator strength is an intrinsic material property, the quest for ever brighter emission has relied on the local density of photonic states engineering, using dielectric or plasmonic resonators1,2. By contrast, a much less explored avenue is to boost the oscillator strength, and hence the emission rate, using a collective behaviour termed superradiance. Recently, it was proposed3 that the latter can be realized using the giant oscillator-strength transitions of a weakly confined exciton in a quantum well when its coherent motion extends over many unit cells. Here we demonstrate single-photon superradiance in perovskite quantum dots with a sub-100 picosecond radiative decay time, almost as short as the reported exciton coherence time4. The characteristic dependence of radiative rates on the size, composition and temperature of the quantum dot suggests the formation of giant transition dipoles, as confirmed by effective-mass calculations. The results aid in the development of ultrabright, coherent quantum light sources and attest that quantum effects, for example, single-photon emission, persist in nanoparticles ten times larger than the exciton Bohr radius.
RESUMEN
Cation mixing in two-dimensional (2D) hybrid organic-inorganic perovskite (HOIP) structures represents an important degree of freedom for modifying organic templating effects and tailoring inorganic structures. However, the limited number of known cation-mixed 2D HOIP systems generally employ a 1:1 cation ratio for stabilizing the 2D perovskite structure. Here, we demonstrate a chiral-chiral mixed-cation system wherein a controlled small amount (<10%) of chiral cation S-2-MeBA (S-2-MeBA = (S)-(-)-2-methylbutylammonium) can be doped into (S-BrMBA)2PbI4 (S-BrMBA = (S)-(-)-4-bromo-α-methylbenzylammonium), modulating the structural symmetry from a higher symmetry (C2) to the lowest symmetry state (P1). This structural change occurs when the concentration of S-2-MeBA, measured by solution nuclear magnetic resonance, exceeds a critical levelâspecifically, for 1.4 ± 0.6%, the structure remains as C2, whereas 3.9 ± 1.4% substitution induces the structure change to P1 (this structure is stable to â¼7% substitution). Atomic occupancy analysis suggests that one specific S-BrMBA cation site is preferentially substituted by S-2-MeBA in the unit cell. Density functional theory calculations indicate that the spin splitting along different k-paths can be modulated by cation doping. A true circular dichroism band at the exciton energy of the 3.9% doping phase shows polarity inversion and a â¼45 meV blue shift of the Cotton-effect-type line-shape relative to (S-BrMBA)2PbI4. A trend toward suppressed melting temperature with higher doping concentration is also noted. The chiral cation doping system and the associated doping-concentration-induced structural transition provide a material design strategy for modulating and enhancing those emergent properties that are sensitive to different types of symmetry breaking.
RESUMEN
Anisotropic exchange splitting in semiconductor quantum dots results in bright-exciton fine-structure splitting important for quantum information processing. Direct measurement of fine-structure splitting usually requires single/few quantum dots at liquid-helium temperature because of its sensitivity to quantum dot size and shape, whereas measuring and controlling fine-structure splitting at an ensemble level seem to be impossible unless all the dots are made to be nearly identical. Here we report strong bright-exciton fine-structure splitting up to 1.6 meV in solution-processed CsPbI3 perovskite quantum dots, manifested as quantum beats in ensemble-level transient absorption at liquid-nitrogen to room temperature. The splitting is robust to quantum dot size and shape heterogeneity, and increases with decreasing temperature, pointing towards a mechanism associated with orthorhombic distortion of the perovskite lattice. Effective-mass-approximation calculations reveal an intrinsic 'fine-structure gap' that agrees well with the observed fine-structure splitting. This gap stems from an avoided crossing of bright excitons confined in orthorhombically distorted quantum dots that are bounded by the pseudocubic {100} family of planes.
RESUMEN
Utilizing the spin degree of freedom of photoexcitations in hybrid organic inorganic perovskites for quantum information science applications has been recently proposed and explored. However, it is still unclear whether the stable photoexcitations in these compounds correspond to excitons, free/trapped electron-hole pairs, or charged exciton complexes such as trions. Here we investigate quantum beating oscillations in the picosecond time-resolved circularly polarized photoinduced reflection of single crystal methyl-ammonium tri-iodine perovskite (MAPbI3) measured at cryogenic temperatures. We observe two quantum beating oscillations (fast and slow) whose frequencies increase linearly with B with slopes that depend on the crystal orientation with respect to the applied magnetic field. We assign the quantum beatings to positive and negative trions whose Landé g-factors are determined by those of the electron and hole, respectively, or by the carriers left behind after trion recombination. These are [Formula: see text] = 2.52 and [Formula: see text]= 2.63 for electrons, whereas [Formula: see text]= 0.28 and [Formula: see text]= 0.57 for holes. The obtained g-values are in excellent agreement with an 8-band K.P calculation for orthorhombic MAPbI3. Using the technique of resonant spin amplification of the quantum beatings we measure a relatively long spin coherence time of ~ 11 (6) nanoseconds for electrons (holes) at 4 K.
RESUMEN
The Rashba splitting in hybrid organic-inorganic lead-halide perovskites (HOIP) is particularly promising and yet controversial, due to questions surrounding the presence or absence of inversion symmetry. Here we utilize two-photon absorption spectroscopy to study inversion symmetry breaking in different phases of these materials. This is an all-optical technique to observe and quantify the Rashba effect as it probes the bulk of the materials. In particular, we measure two-photon excitation spectra of the photoluminescence in 2D, 3D, and anionic mixed HOIP crystals, and show that an additional band above, but close to the optical gap is the signature of new two-photon transition channels that originate from the Rashba splitting. The inversion symmetry breaking is believed to arise from ionic impurities that induce local electric fields. The observation of the Rashba splitting in the bulk of HOIP has significant implications for the understanding of their spintronic and optoelectronic device properties.
RESUMEN
Semiconductor nanoplatelets (NPLs), with their large exciton binding energy, narrow photoluminescence (PL), and absence of dielectric screening for photons emitted normal to the NPL surface, could be expected to become the fastest luminophores amongst all colloidal nanostructures. However, super-fast emission is suppressed by a dark (optically passive) exciton ground state, substantially split from a higher-lying bright (optically active) state. Here, the exciton fine structure in 2-8 monolayer (ML) thick Csn - 1 Pbn Br3n + 1 NPLs is revealed by merging temperature-resolved PL spectra and time-resolved PL decay with an effective mass model taking quantum confinement and dielectric confinement anisotropy into account. This approach exposes a thickness-dependent bright-dark exciton splitting reaching 32.3 meV for the 2 ML NPLs. The model also reveals a 5-16 meV splitting of the bright exciton states with transition dipoles polarized parallel and perpendicular to the NPL surfaces, the order of which is reversed for the thinnest NPLs, as confirmed by TR-PL measurements. Accordingly, the individual bright states must be taken into account, while the dark exciton state strongly affects the optical properties of the thinnest NPLs even at room temperature. Significantly, the derived model can be generalized for any isotropically or anisotropically confined nanostructure.
RESUMEN
Two-dimensional metal-halide perovskites (MHPs) are versatile solution-processed organic/inorganic quantum wells where the structural anisotropy creates profound anisotropy in their electronic and excitonic properties and associated optical constants. We here employ a wholistic framework, based on semiempirical modeling (k·p/effective mass theory calculations) informed by hybrid density functional theory (DFT) and multimodal spectroscopic ellipsometry on (C6H5(CH2)2NH3)2PbI4 films and crystals, that allows us to link the observed optical properties and anisotropy precisely to the underlying physical parameters that shape the electronic structure of a layered MHP. We find substantial frequency-dependent anisotropy in the optical constants and close correspondence between experiment and theory, demonstrating a high degree of in-plane alignment of the two-dimensional planes in both spin-coated thin films and cleaved single crystals made in this study. Hybrid DFT results elucidate the degree to which organic and inorganic frontier orbitals contribute to optical transitions polarized along a particular axis. The combined experimental and theoretical approach enables us to estimate the fundamental electronic bandgap of 2.65-2.68 eV in this prototypical 2D perovskite and to determine the spin-orbit coupling (ΔSO = 1.20 eV) and effective crystal field (δ = -1.36 eV) which break the degeneracy of the frontier conduction band states and determine the exciton fine structure. The methods and results described here afford a better understanding of the connection between structure and induced optical anisotropy in quantum-confined MHPs, an important structure-property relationship for optoelectronic applications and devices.
RESUMEN
Metal-halide perovskite semiconductors have attracted attention for opto-spintronic applications where the manipulation of charge and spin degrees of freedom have the potential to lower power consumption and achieve faster switching times for electronic devices. Lower-dimensional perovskites are of particular interest since the lower degree of symmetry of the metal-halide connected octahedra and the large spin-orbit coupling can potentially lift the spin degeneracy. To achieve their full application potential, long spin-polarized lifetimes and an understanding of spin-relaxation in these systems are needed. Here, we report an intriguing spin-selective excitation of excitons in a series of 2D lead iodide perovskite (n = 1) single crystals by using time- and polarization-resolved transient reflection spectroscopy. Exciton spin relaxation times as long as â¼26 ps at low excitation densities and at room temperature were achieved for a system with small binding energy, 2D EOA2PbI4 (EOA = ethanolamine). By tuning the excitation density and the exciton binding energy, we identify the dominant mechanism as the D'yakonov-Perel (DP) mechanism at low exciton densities and the Bir-Aronov-Pikus (BAP) mechanism at high excitation densities. Together, these results provide new design principles to achieve long spin lifetimes in metal-halide perovskite semiconductors.
RESUMEN
Correction for 'Rashba exciton in a 2D perovskite quantum dot' by Michael W. Swift et al., Nanoscale, 2021, 13, 16769-16780, DOI: 10.1039/D1NR04884H.
RESUMEN
The Rashba effect has been proposed to give rise to a bright exciton ground state in halide perovskite nanocrystals (NCs), resulting in very fast radiative recombination at room temperature and extremely fast radiative recombination at low temperature. In this paper we find the dispersion of the "Rashba exciton", i.e., the exciton whose bulk dispersion reflects large spin-orbit Rashba terms in the conduction and valence bands and thus has minima at non-zero quasi-momenta. Placing Rashba excitonsin quasi-2D cylindrical quantum dots, we calculate size-dependent levels of confined excitons and their oscillator transition strengths. We consider the implications of this model for two-dimensional hybrid organic-inorganic perovskites, discuss generalizations of this model to 3D NCs, and establish criteria under which a bright ground exciton state could be realized.
RESUMEN
We report 2D hybrid perovskites comprising a blend of chiral arylammonium and achiral alkylammonium spacer cations (1:1 mole ratio). These new perovskites feature an unprecedented combination of chirality and alkyl-aryl functionality alongside noncovalent intermolecular interactions (e.g., CH···π interactions), determined by their crystal structures. The mixed-cation perovskites exhibit a circular dichroism that is markedly different from the purely chiral cation analogues, offering new avenues to tune the chiroptical properties of known chiral perovskites, instead of solely relying on otherwise complex chemical syntheses of new useable chiral cations. Further, the ability to dilute the density of chiral cations by mixing with achiral cations may offer a potential way to tailor the spin-based properties in 2D hybrid perovskites, such as Rashba-Dresselhaus spin splitting and chirality-induced spin selectivity and magnetization effects.
RESUMEN
Two-dimensional (2D) hybrid metal halide perovskites have emerged as outstanding optoelectronic materials and are potential hosts of Rashba/Dresselhaus spin-splitting for spin-selective transport and spin-orbitronics. However, a quantitative microscopic understanding of what controls the spin-splitting magnitude is generally lacking. Through crystallographic and first-principles studies on a broad array of chiral and achiral 2D perovskites, we demonstrate that a specific bond angle disparity connected with asymmetric tilting distortions of the metal halide octahedra breaks local inversion symmetry and strongly correlates with computed spin-splitting. This distortion metric can serve as a crystallographic descriptor for rapid discovery of potential candidate materials with strong spin-splitting. Our work establishes that, rather than the global space group, local inorganic layer distortions induced via appropriate organic cations provide a key design objective to achieve strong spin-splitting in perovskites. New chiral perovskites reported here couple a sizeable spin-splitting with chiral degrees of freedom and offer a unique paradigm of potential interest for spintronics.
RESUMEN
Fundamental photophysical behavior in CsPbBr3 nanocrystals (NCs), especially at low temperatures, is under active investigation. While many studies have reported temperature-dependent photoluminescence, comparatively few have focused on understanding the temperature-dependent absorption spectrum. Here, we report the temperature-dependent (35-300 K) absorption and photoluminescence spectra of zwitterionic ligand-capped CsPbBr3 NCs with four different edge lengths (d = 4.9, 7.2, 8.1, and 13.2 nm). The two lowest-energy excitonic transitions are quantitatively modeled over the full temperature range within the effective mass approximation considering the quasi-cubic NC shape and nonparabolicity of the electronic bands. Significantly, we find that the effective dielectric constant determined from the best fit model parameters is independent of temperature. Moreover, we observe a temperature-dependent Stokes shift that saturates at a finite value of Δ ≈ 10 meV at low temperatures for d = 7.2 nm NCs, which is absent in bulk CsPbBr3 films. Overall, these observations highlight differences between the temperature-dependent dielectric behavior of NC and bulk perovskites and point to the need for a more unified theoretical understanding of absorption and emission in halide perovskites.
RESUMEN
Ligand-capped nanocrystals (NCs) of lead halide perovskites, foremost fully inorganic CsPbX3 NCs, are the latest generation of colloidal semiconductor quantum dots. They offer a set of compelling characteristics-large absorption cross section, as well as narrow, fast, and efficient photoluminescence with long exciton coherence times-rendering them attractive for applications in light-emitting devices and quantum optics. Monodisperse and shape-uniform, broadly size-tunable, scalable, and robust NC samples are paramount for unveiling their basic photophysics, as well as for putting them into use. Thus far, no synthesis method fulfilling all these requirements has been reported. For instance, long-chain zwitterionic ligands impart the most durable surface coating, but at the expense of reduced size uniformity of the as-synthesized colloid. In this work, we demonstrate that size-selective precipitation of CsPbBr3 NCs coated with a long-chain sulfobetaine ligand, namely, 3-(N,N-dimethyloctadecylammonio)-propanesulfonate, yields monodisperse and sizable fractions (>100 mg inorganic mass) with the mean NC size adjustable in the range between 3.5 and 16 nm and emission peak wavelength between 479 and 518 nm. We find that all NCs exhibit an oblate cuboidal shape with the aspect ratio of 1.2 × 1.2 × 1. We present a theoretical model (effective mass/k·p) that accounts for the anisotropic NC shape and describes the size dependence of the first and second excitonic transition in absorption spectra and explains room-temperature exciton lifetimes. We also show that uniform zwitterion-capped NCs readily form long-range ordered superlattices upon solvent evaporation. In comparison to more conventional ligand systems (oleic acid and oleylamine), supercrystals of zwitterion-capped NCs exhibit larger domain sizes and lower mosaicity. Both kinds of supercrystals exhibit superfluorescence at cryogenic temperatures-accelerated collective emission arising from the coherent coupling of the emitting dipoles.
RESUMEN
We demonstrate theoretically that non-chiral perovskite layers can exhibit circular dichroism (CD) in the absence of a magnetic field and without chiral activation by chiral molecules. The effect is shown to be due to splitting of helical excitonic states which can form in structures of orthorhombic or lower symmetry that exhibit Rashba spin effects. The selective coupling of these helical exciton states to helical light is shown to give rise to circular dichroism. Polarization dependent absorption is shown to occur due to the combined effect of Rashba splitting, in-plane symmetry breaking, and the effect of the exciton momentum on its fine structure, which takes the form of Zeeman splitting in an effective magnetic field. This phenomenon, which can be considered as a manifestation of extrinsic chirality, results in significant CD with an anisotropy factor of up to 30% in orthorhombic perovskite layers under off-normal, top illumination conditions, raising the possibility of its observation in non-chiral perovskite structures.
RESUMEN
Inorganic lead halide perovskite nanostructures show promise as the active layers in photovoltaics, light emitting diodes, and other optoelectronic devices. They are robust in the presence of oxygen and water, and the electronic structure and dynamics of these nanostructures can be tuned through quantum confinement. Here we create aligned bundles of CsPbBr3 nanowires with widths resulting in quantum confinement of the electronic wave functions and subject them to ultrafast microscopy. We directly image rapid one-dimensional exciton diffusion along the nanowires, and we measure an exciton trap density of roughly one per nanowire. Using transient absorption microscopy, we observe a polarization-dependent splitting of the band edge exciton line, and from the polarized fluorescence of nanowires in solution, we determine that the exciton transition dipole moments are anisotropic in strength. Our observations are consistent with a model in which splitting is driven by shape anisotropy in conjunction with long-range exchange.
RESUMEN
We present an analysis of quantum confinement of carriers and excitons, and exciton fine structure, in metal halide perovskite (MHP) nanocrystals (NCs). Starting with coupled-band k · P theory, we derive a nonparabolic effective mass model for the exciton energies in MHP NCs valid for the full size range from the strong to the weak confinement limits. We illustrate the application of the model to CsPbBr3 NCs and compare the theory against published absorption data, finding excellent agreement. We then apply the theory of electron-hole exchange, including both short- and long-range exchange interactions, to develop a model for the exciton fine structure. We develop an analytical quasicubic model for the effect of tetragonal and orthorhombic lattice distortions on the exchange-related exciton fine structure in CsPbBr3, as well as some hybrid organic MHPs of recent interest, including formamidinium lead bromide (FAPbBr3) and methylammonium lead iodide (MAPbI3). Testing the predictions of the quasicubic model using hybrid density functional theory (DFT) calculations, we find qualitative agreement in tetragonal MHPs but significant disagreement in the orthorhombic modifications. Moreover, the quasicubic model fails to correctly describe the exciton oscillator strength and with it the long-range exchange corrections in these systems. Introducing the effect of NC shape anisotropy and possible Rashba terms into the model, we illustrate the calculation of the exciton fine structure in CsPbBr3 NCs based on the results of the DFT calculations and examine the effect of Rashba terms and shape anisotropy on the calculated fine structure.
RESUMEN
Aliovalent doping of CdSe nanocrystals (NCs) via cation exchange processes has resulted in interesting and novel observations for the optical and electronic properties of the NCs. However, despite over a decade of study, these observations have largely gone unexplained, partially due to an inability to precisely characterize the physical properties of the doped NCs. Here, electrostatic force microscopy was used to determine the static charge on individual, cation-doped CdSe NCs in order to investigate their net charge as a function of added cations. While the NC charge was relatively insensitive to the relative amount of doped cation per NC, there was a remarkable and unexpected correlation between the average NC charge and PL intensity, for all dopant cations introduced. We conclude that the changes in PL intensity, as tracked also by changes in NC charge, are likely a consequence of changes in the NC radiative rate caused by symmetry breaking of the electronic states of the nominally spherical NC due to the Coulombic potential introduced by ionized cations.
RESUMEN
The bright emission observed in cesium lead halide perovskite nanocrystals (NCs) has recently been explained in terms of a bright exciton ground state [ Becker et al. Nature 2018 , 553 , 189 - 193 ], a claim that would make these materials the first known examples in which the exciton ground state is not an optically forbidden dark exciton. This unprecedented claim has been the subject of intense experimental investigation that has so far failed to detect the dark ground-state exciton. Here, we review the effective-mass/electron-hole exchange theory for the exciton fine structure in cubic and tetragonal CsPbBr3 NCs. In our calculations, the crystal field and the short-range electron-hole exchange constant were calculated using density functional theory together with hybrid functionals and spin-orbit coupling. Corrections associated with long-range exchange and surface image charges were calculated using measured bulk effective mass and dielectric parameters. As expected, within the context of the exchange model, we find an optically inactive ground exciton level. However, in this model, the level order for the optically active excitons in tetragonal CsPbBr3 NCs is opposite to what has been observed experimentally. An alternate explanation for the observed bright exciton level order in CsPbBr3 NCs is offered in terms of the Rashba effect, which supports the existence of a bright ground-state exciton in these NCs. The size dependence of the exciton fine structure calculated for perovskite NCs shows that the bright-dark level inversion caused by the Rashba effect is suppressed by the enhanced electron-hole exchange interaction in small NCs.