A real-time vehicle safety system by concurrent object detection and head pose estimation via stereo vision.

A considerable number of vehicular accidents occur in low-millage zones like school streets, neighborhoods, and parking lots, among others. Therefore, the proposed work aims to provide a novel ADAS system to warn about dangerous scenarios by analyzing the driver's attention and the corresponding distances between the vehicle and the detected object on the road. This approach is made possible by concurrent Head Pose Estimation (HPE) and Object/Pedestrian Detection. Both approaches have shown independently their viable application in the automotive industry to decrease the number of vehicle collisions. The proposed system takes advantage of stereo vision characteristics for HPE by enabling the computation of the Euler Angles with a low average error for classifying the driver's attention on the road using neural networks. For Object Detection, stereo vision is used to detect the distance between the vehicle and the approaching object; this is made with a state-of-the-art algorithm known as YOLO-R and a fast template matching technique known as SoRA that provides lower processing times. The result is an ADAS system designed to ensure adequate braking time, considering the driver's attention on the road and the distances to objects.

3D Data Processing and Entropy Reduction for Reconstruction from Low-Resolution Spatial Coordinate Clouds in a Technical Vision System.

This paper proposes an advancement in the application of a Technical Vision System (TVS), which integrates a laser scanning mechanism with a single light sensor to measure 3D spatial coordinates. In this application, the system is used to scan and digitalize objects using a rotating table to explore the potential of the system for 3D scanning at reduced resolutions. The experiments undertaken searched for optimal scanning windows and used statistical data filtering techniques and regression models to find a method to generate a 3D scan that was still recognizable with the least amount of 3D points, balancing the number of points scanned and time, while at the same time reducing effects caused by the particularities of the TVS, such as noise and entropy in the form of natural distortion in the resulting scans. The evaluation of the experimentation results uses 3D point registration methods, joining multiple faces from the original volume scanned by the TVS and aligning it to the ground truth model point clouds, which are based on a commercial 3D camera to verify that the reconstructed 3D model retains substantial detail from the original object. This research finds it is possible to reconstruct sufficiently detailed 3D models obtained from the TVS, which contain coarsely scanned data or scans that initially lack high definition or are too noisy.

Application of Information Theory to Computer Vision and Image Processing.

Our perception of the world is the product of the human visual system's complex optical and physical process [...].

Shannon Entropy Used for Feature Extractions of Optical Patterns in the Context of Structural Health Monitoring.

A novelty signal processing method is proposed for a technical vision system (TVS). During data acquisition of an optoelectrical signal, part of this is random electrical fluctuation of voltages. Information theory (IT) is a well-known field that deals with random processes. A method based on using of the Shannon Entropy for feature extractions of optical patterns is presented. IT is implemented in structural health monitoring (SHM) to augment the accuracy of optoelectronic signal classifiers for a metrology subsystem of the TVS. To enhance the TVS spatial coordinate measurement performance at real operation conditions with electrical and optical noisy environments to estimate structural displacement better and evaluate its health for a better estimation of structural displacement and the evaluation of its health. Five different machine learning (ML) techniques are used in this work to classify optical patterns captured with the TVS. Linear predictive coding (LPC) and Autocorrelation function (ACC) are for extraction of optical patterns. The Shannon entropy segmentation (SH) method extracts relevant information from optical patterns, and the model's performance can be improved. The results reveal that segmentation with Shannon's entropy can achieve over 95.33%. Without Shannon's entropy, the worst accuracy was 33.33%.

Determination of trajectories using IKZ/CF inertial navigation: Methodological proposal.

Nowadays, there are different methods used in the autonomous navigation task; current solutions include inertial navigation systems (INS). However, these systems present drift errors that are attenuated by the integration of absolute reference systems such as GPS, and antennas, among others. Consequently, few works concentrate efforts on developing a methodology to reduce drift errors in INS due to the widespread practice of incorporating absolute references into their systems. However, absolute references must be placed beforehand, which is not always possible. This work presents an improvement on our methodological proposal IKZ for tracking and localization of moving objects by integrating a complementary filter (CF). The main contribution of this paper is the methodological proposal in the integration between IKZ and CF, maintaining the restrictive properties to the drift error and significantly improving the handling characteristics of the system in real applications. Furthermore, the IKZ/CF was tested with raw data from an MPU-9255 in order to analyze the results between tests.

Comparison between Different Types of Sensors Used in the Real Operational Environment Based on Optical Scanning System.

The present paper describes the experimentation in a controlled environment and a real environment using different photosensors, such as infrared light emitting diode (IRLED-as receiver), photodiode, light dependent resistor (LDR), and blue LED for the purpose of selecting those devices, which can be employed in adverse conditions, such as sunlight or artificial sources. The experiments that are described in this paper confirmed that the blue LED and phototransistor could be used as a photosensor of an Optical Scanning System (OSS), because they were less sensitive to sunlight radiation. Moreover, they are appropriate as reference sources that are selected for the experiment (blue LED flashlight and light bulb). The best experimental results that were obtained contained a digital filter that was applied to the output of the photosensor, which reduced the standard deviation for the best case for the phototransistor LED from 100.26 to 0.15. For the best case, using the blue LED, the standard deviation was reduced from 86.08 to 0.11. Using these types of devices the cost of the Optical Scanning System can be reduced and a considerable increase in resolution and accuracy.

Electrolyte Magnetohydrondyamics Flow Sensing in an Open Annular Channel-A Vision System for Validation of the Mathematical Model.

Magnetohydrodynamics (MHD) is becoming more popular every day among developers of applications based on microfluidics, such as “lab on a chip” (LOC) and/or “micro-total analysis systems” (micro-TAS). Its physical properties enable fluid manipulation for tasks such as pumping, networking, propelling, stirring, mixing, and even cooling without the need for mechanical components, and its non-intrusive nature provides a solution to mechanical systems issues. However, these are not easy tasks. They all require precise flow control, which depends on several parameters, like microfluidics conductivity, the microfluidics conduit (channel) shape and size configuration, and the interaction between magnetic and electric fields. This results in a mathematical model that needs to be validated theoretically and experimentally. The present paper introduces the design of a 3D laminar flow involving an electrolyte in an annular open channel driven by a Lorentz force. For an organized description, first of all is provided an introduction to MHD applied in microfluidics, then an overall description of the proposed MHD microfluidic system is given, after that is focused in the theoretical validation of the mathematical model, next is described the experimental validation of the mathematical model using a customized vision system, and finally conclusions and future work are stated.

Improving the response of accelerometers for automotive applications by using LMS adaptive filters.

In this paper, the least-mean-squares (LMS) algorithm was used to eliminate noise corrupting the important information coming from a piezoresisitive accelerometer for automotive applications. This kind of accelerometer is designed to be easily mounted in hard to reach places on vehicles under test, and they usually feature ranges from 50 to 2,000 g (where is the gravitational acceleration, 9.81 m/s(2)) and frequency responses to 3,000 Hz or higher, with DC response, durable cables, reliable performance and relatively low cost. However, here we show that the response of the sensor under test had a lot of noise and we carried out the signal processing stage by using both conventional and optimal adaptive filtering. Usually, designers have to build their specific analog and digital signal processing circuits, and this fact increases considerably the cost of the entire sensor system and the results are not always satisfactory, because the relevant signal is sometimes buried in a broad-band noise background where the unwanted information and the relevant signal sometimes share a very similar frequency band. Thus, in order to deal with this problem, here we used the LMS adaptive filtering algorithm and compare it with others based on the kind of filters that are typically used for automotive applications. The experimental results are satisfactory.

Improving the response of accelerometers for automotive applications by using LMS adaptive filters: Part II.

In this paper, the fast least-mean-squares (LMS) algorithm was used to both eliminate noise corrupting the important information coming from a piezoresisitive accelerometer for automotive applications, and improve the convergence rate of the filtering process based on the conventional LMS algorithm. The response of the accelerometer under test was corrupted by process and measurement noise, and the signal processing stage was carried out by using both conventional filtering, which was already shown in a previous paper, and optimal adaptive filtering. The adaptive filtering process relied on the LMS adaptive filtering family, which has shown to have very good convergence and robustness properties, and here a comparative analysis between the results of the application of the conventional LMS algorithm and the fast LMS algorithm to solve a real-life filtering problem was carried out. In short, in this paper the piezoresistive accelerometer was tested for a multi-frequency acceleration excitation. Due to the kind of test conducted in this paper, the use of conventional filtering was discarded and the choice of one adaptive filter over the other was based on the signal-to-noise ratio improvement and the convergence rate.

Algorithmic error correction of impedance measuring sensors.

This paper describes novel design concepts and some advanced techniques proposed for increasing the accuracy of low cost impedance measuring devices without reduction of operational speed. The proposed structural method for algorithmic error correction and iterating correction method provide linearization of transfer functions of the measuring sensor and signal conditioning converter, which contribute the principal additive and relative measurement errors. Some measuring systems have been implemented in order to estimate in practice the performance of the proposed methods. Particularly, a measuring system for analysis of C-V, G-V characteristics has been designed and constructed. It has been tested during technological process control of charge-coupled device CCD manufacturing. The obtained results are discussed in order to define a reasonable range of applied methods, their utility, and performance.

Remote sensor for spatial measurements by using optical scanning.

In this paper, we propose a low-cost contact-free measurement system for both 3-D data acquisition and fast surface parameter registration by digitized points. Despite the fact that during the last decade several approaches for both contact-free measurement techniques aimed at carrying out object surface recognition and 3-D object recognition have been proposed, they often still require complex and expensive equipment. Therefore, alternative low cost solutions are in great demand. Here, two low-cost solutions to the above-mentioned problem are presented. These are two examples of practical applications of the novel passive optical scanning system presented in this paper.