RESUMEN
Broadband electroluminescence based on environment-friendly emitters is promising for healthy lighting yet remains an unprecedented challenge to progress. The copper halide-based emitters are competitive candidates for broadband emission, but their high-performance electroluminescence shows inadequate broad emission bandwidth of less than 90 nm. Here, we demonstrate efficient ultra-broadband electroluminescence from a copper halide (CuI) nanocluster single emitter prepared by a one-step solution synthesis-deposition process, through dedicated design of ligands and subtle selection of solvents. The CuI nanocluster exhibits high rigidity in the excitation state as well as dual-emissive modes of phosphorescence and temperature-activated delayed fluorescence, enabling the uniform cluster-composed film to show excellent stability and high photoluminescent efficiency. In consequence, ultra-broadband light-emitting diodes (LEDs) present nearly identical performance in an inert or air atmosphere without encapsulation and outstanding high-temperature operation performance, reaching an emission full width at half maximum (FWHM) of ~120 nm, a peak external quantum efficiency of 13%, a record maximum luminance of ~50,000 cd m-2, and an operating half-lifetime of 137 h at 100 cd m-2. The results highlight the potential of copper halide nanoclusters for next-generation healthy lighting.
RESUMEN
A photocatalytic three-component reaction of a nitroarene, a thiophenol, and a ketone for the synthesis of multifunctional diaryl sulfides was reported using a nitro group as the nitrogen source and thiophenol as the sulfur source. Thiophenol also serves as a proton donor to reduce nitroarene to arylamine as a key intermediate for the formation of C-N and C-S bonds. Good functional group tolerance and mild reaction conditions make this method have practical synthetic value for diversified multifunctional diaryl sulfides.
RESUMEN
An efficient approach for 1,2-difunctionalization of aromatic olefins and the synthesis of functionalized 1,4-diols monoethers has been established via a photoinduced three-component reaction of an α-alkoxycarboxylic acid, an aromatic olefin, and an aldehyde. The reaction proceeds by photoinduced oxidative decarboxylation of the carboxylic acid followed by the addition of the α-alkoxyalkyl radical to the olefin, one-electron reduction of the addition radical, and the nucleophilic attack of the resulting carbanion to the aldehyde. Besides the convenient one-pot protocol of the three-component reaction, this method offers several other advantages, including good functional group tolerance for the three substrates, gentle reaction conditions, and ease of scaling up. The reaction mechanism has been investigated through free radical trapping experiment and isotope labeling experiments.
RESUMEN
Supercapacitor is an electrochemical energy-storage technology that can meet the green and sustainable energy needs of the future. However, a low energy density was a bottleneck that limited its practical application. To overcome this, we developed a heterojunction system composed of two-dimensional (2D) graphene and hydroquinone dimethyl ether- an atypical redox-active aromatic ether. This heterojunction displayed a large specific capacitance (Cs) of 523 F g-1 at 1.0 A g-1, as well as good rate capability and cycling stability. When assembled in symmetric and asymmetric two-electrode configuration, respectively, supercapacitors can work in voltage windows of 0 â¼ 1.0 V and 0 â¼ 1.6 V, accordingly, and exhibited attractive capacitive characteristics. The best device can deliver an energy density of 32.4 Wh Kg-1 and a power density of 8000 W Kg-1, and suffered a small capacitance degradation. Additionally, the device showed low self-discharge and leakage current behaviors during long time. This strategy may inspire exploration of aromatic ether electrochemistry and pave a way to develop electrical double-layer capacitance (EDLC)/pseudocapacitance heterojunctions to boost the critical energy density.
RESUMEN
Reduced graphene oxide (rGO) supercapacitors usually feature poor capacitive characteristics. In the current work, coupling of the simple, nonclassical redox molecule amino hydroquinone dimethylether with rGO was found to boost the rGO capacitance to 523 F g-1. The assembled device exhibited an energy density of 143 Wh kg-1 and excellent rate capability and cyclability.
Asunto(s)
Grafito , Capacidad EléctricaRESUMEN
Organic functionalization of graphene framework was an effective means used to boost the storage performances of lithium, but it lacked a universal strategic guideline for introducing functional groups (electron-withdrawing and electron-donating modules are overall classified). It mainly entailed designing and synthesizing graphene derivatives, in which the interference functional groups were necessarily excluded. To this end, a unique synthetic methodology based on graphite reduction cascaded by electrophilic reaction was developed. The electron-withdrawing-type groups (Br; trifluoroacetyl: TFAc) and electron-donating-type counterparts (butyl: Bu; 4-methoxyphenyl: 4-MeOPh) were readily attached to graphene sheets at a comparable functionalization degree. As the electron density of carbon skeleton was enriched by electron-donating modules, particularly for Bu units, the lithium-storage capacity, rate capability and cyclability were appreciably boosted. For example, they had 512 and 286 mA h g-1 at 0.5C and 2C, respectively; and 88 % of capacity retention after 500 cycles at 1C.
RESUMEN
We describe a three-component reaction of malononitrile, benzaldehyde and N,N-dimethylaniline using aluminium doped CdSeS/CdZnSeS(Al)/ZnS quantum dots (QDs) as visible light catalysts to synthesize α-aminobutyrilitriles at room temperature and under mild conditions. The reactions exhibit high functional group tolerance, and the well dispersed quantum dot catalysts are highly efficient with a turnover number (TON) greater than 1.1 × 103 and can be recycled at least three times without significant loss of catalytic activity.
RESUMEN
We present an efficient and versatile visible light-driven methodology for synthesizing sulfinamides and sulfoxides using nitroarenes as the nitrogen source and thiophenols as the sulfur source. The switch-over of the two reaction pathways was achieved by changing the type of photocatalyst and the amount of thiophenol in the reaction mixture. The reaction proceeds under mild conditions with good functional group tolerance and can easily be scaled up.
RESUMEN
A rocking-chair aqueous proton battery is assembled by using dipyridophenazine and indium hexacyanoferrate as the anode and cathode materials, respectively. The reversible amination of redox-active phenazine moieties in dipyridophenazine and fast intercalation-deintercalation of protons in hexacyanoferrate enable the aqueous proton battery to achieve a reversible specific capacity of 37 mA h g-1 at 1 A g-1, good cycling stability with 76.1% capacity retention over 3000 cycles and excellent rate capability.
RESUMEN
We present an efficient and versatile visible light-driven methodology to transform aryl aldehydes and ketones chemoselectively either to alcohols or to pinacol products with CdSe/CdS core/shell quantum dots as photocatalysts. Thiophenols were used as proton and hydrogen atom donors and as hole traps for the excited quantum dots (QDs) in these reactions. The two products can be switched from one to the other simply by changing the amount of thiophenol in the reaction system. The core/shell QD catalysts are highly efficient with a turn over number (TON) larger than 4 × 104 and 4 × 105 for the reduction to alcohol and pinacol formation, respectively, and are very stable so that they can be recycled for at least 10 times in the reactions without significant loss of catalytic activity. The additional advantages of this method include good functional group tolerance, mild reaction conditions, the allowance of selectively reducing aldehydes in the presence of ketones, and easiness for large scale reactions. Reaction mechanisms were studied by quenching experiments and a radical capture experiment, and the reasons for the switchover of the reaction pathways upon the change of reaction conditions are provided.
RESUMEN
CdSe/CdS core/shell quantum dots (QDs) can be used as stable and highly active photoredox catalysts for efficient transfer hydrogenation of imines to amines with thiophenol as a hydrogen atom donor. This reaction proceeds via a proton-coupled electron transfer (PCET) from the QDs conduction band to the protonated imine followed by hydrogen atom transfer from the thiophenol to the α-aminoalkyl radical. This precious metal free transformation is easy to scale up and can be carried out by a one-pot protocol directly from aldehyde, amine, and thiophenol. Additional advantageous features of this protocol include a wide substrate scope, high yield of the amine products, extremely low catalyst loading (0.001 mol %), high turnover number (105), and the mild reaction conditions of using visible light or sun light at room temperature in neutral media.
RESUMEN
Perfluoroalkylation of N-alkylhydrazones has been achieved via visible light mediated photoredox reactions between the hydrazone and perfluoroalkyl iodide (RfI). This protocol provides a convenient and efficient access to a series of perfluoroalkylated aromatic aldehyde hydrazones which tolerates a wide range of functional groups on the aromatic ring, and allows the use different types of primary and secondary perfluoroalkyl iodides with up to eight carbon atoms. Furthermore, aliphatic aldehyde hydrazones and N-monosubstituted hydrazones which are unreactive in previously reported hydrazone perfluoroalkylation reactions now take part in the reaction under our reaction conditions to give a satisfactory yield of products. Stern-Volmer quenching studies and spin-trapping experiments indicated that these reactions proceed by free radical addition of the Rf radical to the azomethine atom followed by one electron oxidation of the hydrazyl radical and deprotonation of the diazenium cation.
RESUMEN
A direct and regioselective C1-acyloxylation of indolizines was developed via palladium-catalyzed C-H functionalization. A series of indolizines were successfully acyloxylated at the C1 position with the tolerance of a broad range of functional groups. In this reaction, high regioselectivity was achieved in the absence of a directing group. This work represents the first example of indolizine acyloxylation via C-H activation.
Asunto(s)
Indolizinas/química , Indolizinas/síntesis química , Compuestos Organometálicos/química , Paladio/química , Catálisis , Estructura Molecular , EstereoisomerismoRESUMEN
Surface-modified titanium dioxides by highly dispersed NiO particles have an extended absorption in the visible light region and a reduced hole-electron pair recombination than unmodified TiO2. They have now been successfully applied as highly active heterogeneous photocatalysts in the visible light mediated direct cyclization of tertiary anilines with maleimides to give tetrahydroquinoline products in moderate to high yields at ambient temperature. In contrast with unmodified titanium dioxide catalysts that are conventionally used in a stoichiometric amount in combination with UVA light, only a catalytic amount (1 mol %) of the surface-modified TiO2 catalyst is needed along with visible light to efficiently catalyze the reaction. Compared with transition-metal complexes such as Ru(bpy)3Cl2 or Ir(ppy)2(dtbbpy)PF6, advantages of these surface-modified titanium dioxides as photocatalyst include high catalytic activity, low cost, ease of recovering, and being able to be used for at least nine times without significant decay of catalytic activity.
Asunto(s)
Compuestos de Anilina/síntesis química , Maleimidas/síntesis química , Níquel/química , Titanio/química , Compuestos de Anilina/química , Catálisis , Ciclización , Luz , Maleimidas/química , FotoquímicaRESUMEN
A series of annulated 7-membered oxazepine and 8-membered oxazocine derivatives were synthesized by photoreaction of phthalimide derivatives and an alkene. The antimicrobial activities of the synthesized compounds were evaluated, and compounds 18 and 20 exhibited best antibacterial activity against Gram-positive bacteria. The relationships between structure (especially steric structure) and antimicrobial activities are discussed.
Asunto(s)
Oxazepinas/síntesis química , Oxazepinas/farmacología , Oxazocinas/síntesis química , Oxazocinas/farmacología , Antibacterianos/síntesis química , Antibacterianos/farmacología , Pruebas de Sensibilidad Microbiana , Modelos Moleculares , Relación Estructura-Actividad , Difracción de Rayos XRESUMEN
A one-pot, three-component cascade reaction between pyridine, α-acylmethylbromide, and maleic anhydride leading to direct access of 1-bromoindolizines in high yields has been developed. This protocol is accomplished via a reaction sequence of 1,3-dipolar cycloaddition of the pyridinium ylide with maleic anhydride, oxidative decarboxylation of the primary cycloadduct, and dehydrogenative bromination of the resulting 1-unsubstituted indolizine. Copper chloride was used as a catalyst and oxygen as the terminal oxidant. This reaction represents the first example of transition-metal-catalyzed direct dehydrogenative bromination of indolizine at the C-1 position. Moreover, the obtained 1-bromoindolizines can be transformed to other 1-substituted indolizines such as 1-arylindolizines via a simple reaction process.
Asunto(s)
Cobre/química , Indolizinas/química , Indolizinas/síntesis química , Catálisis , Reacción de Cicloadición , Descarboxilación , Halogenación , Estructura MolecularRESUMEN
A new photoinduced three-component reaction between a cyanoarene, an alkene and an N-protected pyrrole has been developed. This reaction extended the scope of the photo-NOCAS reaction by introducing pyrrole as a neutral carbon-centered nucleophile. The cyanoarenes used include tetracyanobenzene (TCB), 2,3,5,6-tetrafluoro-1,4-dicyanobenzene (TFDCB) and 1,4-dicyanobenzene (DCB). N-Methyl, N-phenyl and N-Boc pyrroles are suitable nucleophiles in the reaction. Taking advantage of the strong electron acceptor ability of the singlet excited TCB, a wide range of alkenes, including the highly electron deficient 4-fluoro-, 4-chloro-, 2,3,4,5,6-pentafluorostyrenes and N-methylmaleimide take part in this reaction, leading to the simultaneous 1,2-diarylation of the alkene and the regioselective 2-alkylation of the pyrrole ring via sequential formation of two new C-C bonds between the three reactants.
RESUMEN
Flower-like NiO hierarchical structures with 2-5 µm diameter assembled from nanosheet building blocks have been successfully fabricated via a wet-chemical method combined with thermodecomposition technology. The template-free method is facile and effective in preparing flower-like NiO superstructures in high yield. The intermediate product and final hierarchical structures are characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform IR (FTIR), and thermogravimetric analysis (TGA). The effects of growth temperature and reaction time on the morphologies of the as-prepared structures were investigated by SEM characterization and a possible mechanism for the formation of flower-like NiO is proposed. Based on the nitrogen adsorption and desorption measurements, the BET surface area of the as-obtained sample is 55.7 m²/g and the pore-size distribution plot indicates a bimodal mesopore distribution, with pore sizes of ca. 2.6 nm and 7.4 nm, respectively. In comparison with sphere-like and rod-like structures, the flower-like NiO hierarchical structures show an excellent ability to rapidly remove various pollutants when used as adsorbent and photocatalyst in waste-water treatment, which may be attributed to its unique hierarchical and porous surface structures.
Asunto(s)
Nanoestructuras/ultraestructura , Níquel/química , Purificación del Agua/métodos , Adsorción , Catálisis , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Nanoestructuras/química , Tamaño de la Partícula , Porosidad , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Difracción de Rayos XRESUMEN
Activation parameters have been redetermined for the ring expansions of cyclopropylchlorocarbene and cyclopropylfluorocarbene; agreement between the experimental and computed activation parameters has been significantly improved.
RESUMEN
A novel heterogeneous efficient procedure has been developed for the chemoselective synthesis of acylals (1,1-diacetates) under solvent-free conditions. A novel catalyst prepared by the sulfuric acid catalyzed copolymerization of p-toluenesulfonic acid and paraformaldehyde displays extremely high activities for the title reactions, affording average yields over 90% within several minutes. A comparative study showed that the novel catalyst has much higher activity than other catalysts used for this purpose. Besides, the novel catalyst displays chemoselectivity for the protection of aldehydes in the presence of ketones. In addition the high acidity (4.0 mmol/g), thermal stability (200 ºC) and easy reusability make the novel catalyst one of the best choices for the process.