A study of bioactive glass-ceramic's mechanical properties, apatite formation, and medical applications.

Apparently, bioactive glass-ceramics are made by doing a number of steps, such as creating a microstructure from dispersed crystals within the residual glass, which provides high bending strength, and apatite crystallizes on surfaces of glass-ceramics when calcium ions are present in the blood. Apatite crystals grow on the glass and ceramic surfaces due to the hydrated silica. These materials are biocompatible with living bone in a matter of weeks, don't weaken mechanically or histologically, and exhibit good osteointegration as well as mechanical properties that are therapeutically relevant, such as fracture toughness and flexural strength. As part of this study, we examined mechanical properties, process mechanisms involved in apatite formation, and potential applications for bioactive glass-ceramic in orthopedic surgery, including load-bearing devices.

Angiogenesis, Osseointegration, and Antibacterial Applications of Polyelectrolyte Multilayer Coatings Incorporated With Silver/Strontium Containing Mesoporous Bioactive Glass on 316L Stainless Steel.

The main causes for failure in implant surgery are prolonged exposure of implants or wound and tissue ischemia. Bacterial infection caused by the surrounding medical environment and equipment is also a major risk factor. The medical risk would be greatly reduced if we could develop an implant coating to guide tissue growth and promote antibacterial activity. Mesoporous bioactive glasses are mainly silicates with good osteoinductivity and have been used in medical dentistry and orthopedics for several decades. Strontium ions and silver ions could plausibly be incorporated into bioactive glass to achieve the required function. Strontium ions are trace elements in human bone that have been proposed to promote osseointegration and angiogenesis. Silver ions can cause bacterial apoptosis through surface charge imbalance after bonding to the cell membrane. In this study, functional polyelectrolyte multilayer (PEM) coatings were adhered to 316L stainless steel (SS) by spin coating. The multilayer film was composed of biocompatible and biodegradable collagen as a positively charged layer, γ-polyglutamic acid (γ-PGA) as a negatively charged layer. Chitosan was incorporated to the 11th positively charged layer as a stabilizing barrier. Spray pyrolysis prepared mesoporous bioactive glass incorporated with silver and strontium (AgSrMBG) was added to each negatively charged layer. The PEM/AgSrMBG coating was well hydrophilic with a contact angle of 37.09°, hardness of 0.29 ± 0.09 GPa, Young's modulus of 5.35 ± 1.55 GPa, and roughness of 374.78 ± 22.27 nm, as observed through nano-indention and white light interferometry. The coating's antibacterial activity was sustained for 1 month through the inhibition zone test, and was biocompatible with rat bone marrow mesenchymal stem cells (rBMSCs) and human umbilical vein endothelial cells (HUVECs), as observed in the MTT assay. There was more hydroxyapatite precipitation on the PEM/AgSrMBG surface after being soaked in simulated body fluid (SBF), as observed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In both in vitro and in vivo tests, the PEM/AgSrMBG coating promoted angiogenesis, osseointegration, and antibacterial activity due to the sustained release of silver and strontium ions.

Investigation of Bone Growth in Additive-Manufactured Pedicle Screw Implant by Using Ti-6Al-4V and Bioactive Glass Powder Composite.

In this study, we optimized the geometry and composition of additive-manufactured pedicle screws. Metal powders of titanium-aluminum-vanadium (Ti-6Al-4V) were mixed with reactive glass-ceramic biomaterials of bioactive glass (BG) powders. To optimize the geometry of pedicle screws, we applied a novel numerical approach to proposing the optimal shape of the healing chamber to promote biological healing. We examined the geometry and composition effects of pedicle screw implants on the interfacial autologous bone attachment and bone graft incorporation through in vivo studies. The addition of an optimal amount of BG to Ti-6Al-4V leads to a lower elastic modulus of the ceramic-metal composite material, effectively reducing the stress-shielding effects. Pedicle screw implants with optimal shape design and made of the composite material of Ti-6Al-4V doped with BG fabricated through additive manufacturing exhibit greater osseointegration and a more rapid bone volume fraction during the fracture healing process 120 days after implantation, per in vivo studies.

Deformations of Ti-6Al-4V additive-manufacturing-induced isotropic and anisotropic columnar structures: Insitu measurements and underlying mechanisms.

The deformations of isotropic and anisotropic Ti-6Al-4V columnar structures fabricated by additive manufacturing were extensively examined. The distinct texture and microstructure distributions were characterised. In situ X-ray diffraction measurements show different lattice activities resulting from the different microstructure distributions. Spatially resolved mapping revealed manufacturing-induced crystallite-orientation distributions that determine the deformation mechanisms. We propose a self-consistent model to correlate the multi-scale characteristics, from the anisotropic-texture-distribution microstructure to the bulk mechanical properties. We determined that basal and pyramidal slip activities were activated by tension deformation. The underlying additive-manufacturing-induced crystal plasticity plays a major role. We find that the texture development of the columnar structures and the distribution of crystallite orientation achieved by different processing conditions during additive manufacturing have important effects on the mechanical properties. The dominant deformation mode for the anisotropic Ti-6Al-4V columnar structure is basal slip, and that for the isotropic Ti-6Al-4V columnar structure is pyramidal slip. The difference may be important for determining the fatigue behaviour.

Correlation of Morphology and In-Vitro Degradation Behavior of Spray Pyrolyzed Bioactive Glasses.

Bioactive glass (BG) is considered to be one of the most remarkable materials in the field of bone tissue regeneration due to its superior bioactivity. In this study, both un-treated and polyethylene glycols (PEG)-treated BG particles were prepared using a spray pyrolysis process to study the correlation between particle morphology and degradation behavior. The phase compositions, surface morphologies, inner structures, and specific surface areas of all BG specimens were examined by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption/desorption, respectively. Simulated body fluid (SBF) immersion evaluated the assessments of bioactivity and degradation behavior. The results demonstrate three particle morphologies of solid, porous, and hollow factors. The correlation between porosity, bioactivity, and degradation behavior was discussed.

Manipulation of the degradation behavior of calcium sulfate by the addition of bioglass.

A bioactive calcium sulfate/glass composite was prepared using a sintering technique, and Ca-P-Si glass particles were prepared by spray pyrolysis. The glass exhibited bioactivity in terms of its ability to form apatite in a simulated body fluid. The glass was transformed into two crystallized phases, i.e., calcium phosphate and calcium silicate, respectively, during the heating stage. The presence of the crystallized phases retarded the densification of calcium sulfate. A high sintering temperature of 1200 °C was needed to prepare the composite. The increased addition of glass enhanced the strength and decreases the degradation rate of calcium sulfate. The new composite is not only degradable but also bioactive.

Control of Dopant Distribution in Yttrium-Doped Bioactive Glass for Selective Internal Radiotherapy Applications Using Spray Pyrolysis.

In this study, we demonstrate the fabrication of Y-doped bioactive glass (BG), which is proposed as a potential material for selective internal radiotherapy applications. Owing to its superior bioactivity and biodegradability, it overcomes the problem of yttrium aluminosilicate spheres that remain in the host body for a long duration after treatment. The preparation of Y-doped BG powders were carried out using a spray pyrolysis method. By using two different yttrium sources, we examine the change of the local distribution of yttrium concentration. In addition, characterizations of phase information, particle morphologies, surface areas, and bioactivity were also performed. The results show that both Y-doped BG powders are bioactive and the local Y distribution can be controlled.

Effect of Acetic Acid Concentration on Pore Structure for Mesoporous Bioactive Glass during Spray Pyrolysis.

Mesoporous bioactive glass (MBG) is considered as one of the most important materials in the field of bone implants and drug carriers, owing to its superior bioactivity. In previous studies, tri-block surfactants (e.g., F127 and P123) were commonly used as pore-forming agents. However, the use of surfactants may cause serious problems such as micelle aggregation and carbon contamination and thus decrease bioactivity. Therefore, in this study, we demonstrated the synthesis of MBG using acetic acid (HAc) as a pore-forming agent to overcome the disadvantages caused by surfactants. Both untreated and HAc-treated BG powders were synthesized using spray pyrolysis and various characterizations were carried out. The results show that a mesoporous structure was successfully formed and the highest specific surface area of ~230 m²/g with improved bioactivity was reported.

Morphology Control of Eu-Doped Amorphous Gehlenite Phosphors Prepared by Spray Pyrolysis.

Eu-doped amorphous gehlenite phosphors with various morphologies were synthesized using spray pyrolysis. Along with un-treated precursor, two commonly used pore-forming agents, polyethylene glycol and hydrogen peroxide, were applied to achieve porous and hollow particle structures. The phase compositions, surface morphologies, inner structures and photoluminescence properties of the resulting phosphors were examined by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and fluorescence spectrometry. The results showed that the morphologies of the particles were well-controlled, and a correlation between morphology and photoluminescence properties was established.

Composite Polyelectrolyte Multilayer and Mesoporous Bioactive Glass Nanoparticle Coating on 316L Stainless Steel for Controlled Antibiotic Release and Biocompatibility.

Bacterial infection in wounds or implants can cause osteomyelitis, eventually leading to orthopedic implant failure. In this study, polyelectrolyte multilayer (PEM) coating comprising collagen as the cationic layer, chitosan as the barrier layer and γ-poly-glutamic acid as the anionic layer were fabricated onto a 316L stainless steel substrate by spin coating technique. Tetracycline-loaded 57S mesoporous bioactive glass nanoparticles (57S MBG, SiO2:CaO:P2O5 = 57:33:10 by wt%) were introduced into the γ-poly-glutamic acid layers. Herein, 57S MBG nanoparticles were successfully incorporated into the PEMs with a total thickness of ∼53 µm on 316L stainless steel (SS-PEMs-57S), which exhibited good hydrophilicity with a contact angle of 18.71°. The hardness of SS-PEMs-57S was 0.66 GPa while the Young's modulus was 11.5 GPa; these values are similar to those for the cortical bone. The surface roughness of MBG nanoparticle-incorporated PEMs increased from 231 to 384 nm. Controlled release of tetracycline loaded in MBG nanoparticles resulted in sustained antibacterial effect for up to 7 days, with higher release efficacy at low pH, which may be induced by inflammation or infection. Tetracycline loaded in SS-PEMs-57S showed good bacterial inhibition and maintained good cell viability in rat bone marrow mesenchymal stem cells (BMSCs) in the MTT assay. Moreover, SS-PEMs-57S also promoted mineralization of BMSCs. Therefore, this surface modification technology has great potential for endowing orthopedic implants with antibacterial and osteoconductive properties.