Low-Temperature Methane Combustion Using Ozone over Coß Catalyst.

Catalytic methane (CH4) combustion is a promising approach to reducing the release of unburned methane in exhaust gas. Here, we report Co-exchanged ß zeolite (Coß) as an efficient catalyst for CH4 combustion using O3. A series of ion-exchanged ß zeolites (Co, Ni, Mn, Fe, and Pd) are subjected to the catalytic test, and Coß exhibits a superior performance in a low-temperature region (<100 °C). The results of X-ray absorption spectroscopy (XAS) and catalytic tests for Coß with different Co loadings indicate the isolated Co species is the plausible active site. The reaction mechanism of CH4 combustion over the isolated Co2+ cation is theoretically investigated by the single-component artificial force-induced reaction (SC-AFIR) method to thoroughly search for possible reaction routes. The resulting path toward CO2 formation shows an activation energy of 73 kJ/mol for the rate-determining step and an exothermicity of 1025 kJ/mol, which supports the experimental results. During a long-term catalytic test for 160 h without external heating, the CH4 conversion gradually decreases from 80 to 40%, but the conversion fully recovers after dehydration at 500 °C (0.5 h). The copresence of H2O and CO exhibits a negative impact on the catalytic activity, while NO and SO2 do not markedly change the catalytic activity.

High ionic conduction in a robust anionic metal-organic framework containing Mg2+ under guest vapors.

We report on the synthesis and high ionic conductivity of a highly crystalline Mg2+-containing metal-organic framework (MOF) with Type A feature (i.e., anionic framework having Mg2+ as a counter cation). We synthesized Mg[Zr(C14H3O8)2] (SU-102-Mg) through ion exchange reaction. SU-102-Mg showed a high ionic conductivity of 3.6 × 10-5 S cm-1 (25 °C, under MeCN vapor).

Propane dehydrogenation catalysis of group IIIB and IVB metal hydrides.

Catalytic propane dehydrogenation (PDH) has mainly been studied using metal- and metal oxide-based catalysts. Studies on dehydrogenation catalysis by metal hydrides, however, have rarely been reported. In this study, PDH reactions using group IIIB and IVB metal hydride catalysts were investigated under relatively low-temperature conditions of 450 °C. Lanthanum hydride exhibited the lowest activation energy for dehydrogenation and the highest propylene yield. Based on kinetics studies, a comparison between the reported calculation results and isotope experiments, the hydrogen vacancies of metal hydrides were involved in low-temperature PDH reactions.

The Development of the Regenerable Catalytic System in Selective Catalytic Oxidation of Ammonia with High N2 Selectivity.

Supported particulate noble-metal catalysts are widely used in industrial catalytic reactions. However, these metal species, whether in the form of nanoparticles or highly dispersed entities, tend to aggregate during reactions, leading to a reduced activity or selectivity. Addressing the frequent necessity for the replacement of industrial catalysts remains a significant challenge. Herein, we demonstrate the feasibility of the 'regenerable catalytic system' exemplified by selective catalytic oxidation of ammonia (NH3-SCO) employing Ag/Al2O3 catalysts. Results demonstrate that our highly dispersed Ag catalyst (Ag HD) maintains >90% N2 selectivity at 80% NH3 conversion and >80% N2 selectivity at 100% NH3 conversion after enduring 5 cycles of reducible aggregation and oxidative dispersion. Moreover, it consistently upholds over 98% N2 selectivity at 100% NH3 conversion after 10 cycles of Ar treatment. During the aggregation-dispersion process, the Ag HD catalyst intentionally aggregated into Ag nanoparticles (Ag NP) after H2 reduction and exhibited remarkable regenerable capabilities, returning to the Ag HD state after calcination in the air. This structural evolution was characterized through in situ transmission electron microscopy, atomically resolved high-angle annular dark-field scanning transmission electron microscopy, and X-ray absorption spectroscopy, revealing the on-site oxidative dispersion of Ag NP. Additionally, in situ diffuse reflectance infrared Fourier transform spectroscopy provided insights into the exceptional N2 selectivity on Ag HD catalysts, elucidating the critical role of NO+ intermediates. Our findings suggest a sustainable and cost-effective solution for various industry applications.

Microporosity and Catalytic Activity for Hydrodesulfurization of Pharmacosiderite Mo4P3O16 Synthesized at a Moderate Temperature.

Pharmacosiderite Mo4P3O16 (Pharma-MoPO) consists of [Mo4O4] cubane unit and [PO4] tetrahedral to form an open framework with a microporous structure similar to that of LTA-type zeolite. Although attractive applications are expected due to its microporous structure and redox-active components, its physicochemical properties have been poorly investigated due to the specificity of its synthesis, which requires a high hydrothermal synthesis temperature of 360 °C. In this study, we succeeded in synthesizing Pharma-MoPO by hydrothermal synthesis at 230 °C, which can be applied using a commercially available autoclave by changing the metal source. Through the study of the solids and liquids obtained after hydrothermal syntheses, the formation process of Pharma-MoPO under our studied synthesis conditions was proposed. Advanced characterizations provided detailed structural information on Pharma-MoPO, including the location site of a countercation NH4+. Pharma-MoPO could adsorb CO2 with the amount close to the number of cages without removing NH4+. Pharma-MoPO exhibited stable catalytic activity for the hydrodesulfurization of thiophene while maintaining its crystal structure, except for the introduction of sulfide by replacing lattice oxygens. Pharmacosiderite Mo4P3O16 was successfully obtained by hydrothermal synthesis at a moderate temperature, and its microporosity for CO2 adsorption and catalytic properties for hydrodesulfurization were discovered.

Abundance and potential sources of floating polystyrene foam macro- and microplastics around Japan.

Polystyrene foam is widely used due to its lightweight, impact resistance, and excellent thermal insulation properties. Meanwhile, weak adhesion between beads in polystyrene foam leads to fragmentation, generating a substantial amount of microplastics (<5 mm). Such polystyrene foam debris littered on beaches diminishes the aesthetic value of coastal areas, negatively impacting tourism. Due to its density lower than other plastics, polystyrene foam macroplastics float on the sea surface and, thus, they are significantly influenced by wind drag during oceanic transport. In contrast, polystyrene foam microplastics drifting beneath the sea surface are carried mostly by ocean currents. These properties of polystyrene foam macroplastics and microplastics hinder the elucidation of their transport, distribution, and fate in nature, despite their potential to adversely impact marine ecosystems. To elucidate the generation, transport, and fragmentation processes of polystyrene foam ocean plastics, we conducted concurrent visual observations and surface net towing from seven training vessels around Japan during 2014-2020. Overall, the abundances of polystyrene foam ocean plastics were higher in the Sea of Japan than in the North Pacific south of Japan. The average abundances of polystyrene foam microplastics and macroplastics were 0.33 pieces/m3 and 0.45 pieces/km, respectively, over the entire sea area around Japan. In the Sea of Japan, the peak abundances of polystyrene foam macroplastics occurred in upstream of the Tsushima Current, while the peak for microplastics occurred downstream, suggesting that continuous fragmentation occurred during transport between the two peaks. Backward-in-time particle tracking model experiments suggested that the sources of polystyrene foam macroplastics observed in the Sea of Japan included aquaculture buoys and styrene debris beached around the Tsushima Strait. The present study demonstrated that reducing the release of polystyrene foam aquaculture floats will likely diminish the abundance of ocean plastics in the Sea of Japan.

Active site tuning based on pseudo-binary alloys for low-temperature acetylene semihydrogenation.

The development of an efficient catalytic system for low-temperature acetylene semihydrogenation using nonnoble metals is important for the cost-effective production of polymer-grade pure ethylene. However, it remains challenging owing to the intrinsic low activity. Herein, we report a flexibly tunable catalyst design concept based on a pseudo-binary alloy, which enabled a remarkable enhancement in the catalytic activity, selectivity, and durability of a Ni-based material. A series of (Ni1-xCux)3Ga/TiO2 catalysts exhibiting L12-type pseudo-binary alloy structures with various Cu contents (x = 0.2, 0.25, 0.33, 0.5, 0.6, and 0.75) were prepared for active site tuning. The optimal catalyst, (Ni0.8Cu0.2)3Ga/TiO2, exhibited outstandingly high catalytic activity among reported 3d transition metal-based systems and excellent ethylene selectivity (96%) and long-term stability (100 h) with near full conversion even at 150 °C. A mechanistic study revealed that Ni2Cu hollow sites on the (111) surface weakened the strong adsorption of acetylene and vinyl adsorbate, which significantly accelerated the hydrogenation process and inhibited undesired ethane formation.

Catalytic ammonia synthesis on HY-zeolite-supported angstrom-size molybdenum cluster.

The development of new catalysts with high N2 activation ability is an effective approach for low-temperature ammonia synthesis. Herein, we report a novel angstrom-size molybdenum metal cluster catalyst for efficient ammonia synthesis. This catalyst is prepared by the impregnation of a molybdenum halide cluster complex with an octahedral Mo6 metal core on HY zeolite, followed by the removal of all the halide ligands by activation with hydrogen. In this activation, the size of the Mo6 cluster (ca. 7 Å) is almost retained. The resulting angstrom-size cluster shows catalytic activity for ammonia synthesis from N2 and H2, and the reaction proceeds continuously even at 200 °C under 5.0 MPa. DFT calculations suggest that N[triple bond, length as m-dash]N bond cleavage is promoted by the cooperation of the multiple molybdenum sites.

Feeble Single-Atom Pd Catalysts for H2 Production from Formic Acid.

Single-atom catalysts are thought to be the pinnacle of catalysis. However, for many reactions, their suitability has yet to be unequivocally proven. Here, we demonstrate why single Pd atoms (PdSA) are not catalytically ideal for generating H2 from formic acid as a H2 carrier. We loaded PdSA on three silica substrates, mesoporous silicas functionalized with thiol, amine, and dithiocarbamate functional groups. The Pd catalytic activity on amino-functionalized silica (SiO2-NH2/PdSA) was far higher than that of the thiol-based catalysts (SiO2-S-PdSA and SiO2-NHCS2-PdSA), while the single-atom stability of SiO2-NH2/PdSA against aggregation after the first catalytic cycle was the weakest. In this case, Pd aggregation boosted the reaction yield. Our experiments and calculations demonstrate that PdSA in SiO2-NH2/PdSA loosely binds with amine groups. This leads to a limited charge transfer from Pd to the amine groups and causes high aggregability and catalytic activity. According to the density functional calculations, the loose binding between Pd and N causes most of Pd's 4d electrons in amino-functionalized SiO2 to remain close to the Fermi level and labile for catalysis. However, PdSA chemically binds to the thiol group, resulting in strong hybridization between Pd and S, pulling Pd's 4d states deeper into the conduction band and away from the Fermi level. Consequently, fewer 4d electrons were available for catalysis.

In Situ Spectroscopic Study of CO2 Capture and Methanation over Ni-Ca Based Dual Functional Materials.

Carbon dioxide capture and reduction (CCR) to CH4 using dual-functional materials (DFMs) have recently attracted significant attention as a promising strategy for carbon capture and utilization. In this study, we investigate the mechanism of CCR to CH4 over Al2 O3 -supported Ni-Ca DFMs (Ni-Ca/Al2 O3 ) under cyclic feeds of model combustion exhaust (2.5 % CO2 +0 or 10 % O2 /N2 ) and H2 at 500 °C. Various spectroscopic analyses, including time-resolved in situ X-ray diffraction and X-ray absorption spectroscopy, were conducted during CO2 capture and the subsequent H2 -reduction steps. Based on these analyses, we propose a mechanism of CCR to CH4 over Ni-Ca based DFMs. During the CO2 capture step, the Ni0 species underwent complete oxidation in the presence of O2 to yield NiO. Subsequently, CO2 was captured through the interaction between the CaO surface and CO2 , resulting in the formation of CaCO3 layers on the CaO particles. When the gas flow was switched to H2 , NiO was partially to provide Ni0 sites, which acted as active sites for H2 -reduction of the adjacent CaCO3 layers to yield CaO and gas-phase products, CH4 and H2 O.

Continuous Unsteady-State De-NOx System via Tandem Water-Gas Shift, NH3 Synthesis, and NH3-SCR under Periodic Lean/Rich Conditions.

The development of urea-free and platinum group metal (PGM)-free catalytic systems for automotive emission control is a challenging task. Herein, we report a new de-NOx system using cyclic feeds of rich and lean gas mixtures with PGM-free catalysts. Initial catalyst screening tests showed that Cu/CeO2 with 5 wt % Cu loading was the most suitable for the water-gas shift reaction (WGS, CO + H2O → CO2 + H2), followed by the selective NH3 synthesis by the NO + H2 reaction. The unsteady-state system under alternating feeds of rich (0.1% NO + 0.5% CO + 1% H2O) and lean (0.1% NO + 2% O2 + 1% H2O) gas mixtures over a mixture of Cu/CeO2 and Cr-exchanged mordenite (CrMOR) showed higher NOx conversion than the steady-state (0.1% NO + 0.35% CO + 0.6% O2 + 1% H2O) reaction between 200 and 500 °C. The de-NOx mechanism under periodical rich/lean conditions was studied by operando infrared (IR) experiments. In the rich period, the WGS reaction on the Cu/CeO2 catalyst yield H2, which reduces NO to NH3 on the Cu/CeO2 catalyst. NH3 is then captured by the Brønsted acid sites of CrMOR. In the subsequent lean period, the adsorbed NH3 acts as a reductant for the selective catalytic reduction of NOx catalyzed by the Cr sites of CrMOR. This study demonstrates a new urea-free and PGM-free catalytic system that can provide an alternative de-NOx technology for automotive catalysis under periodic rich/lean conditions.

Mechanism of NH3-SCR over P/CeO2 Catalysts Investigated by Operando Spectroscopies.

This study reports a comprehensive investigation into the active sites and reaction mechanism for the selective catalytic reduction of NO by NH3 (NH3-SCR) over phosphate-loaded ceria (P/CeO2). Catalyst characterization and density functional theory calculations reveal that H3PO4 and H2P2O6 species are the dominant phosphate species on the P/CeO2 catalysts under the experimental conditions. The reduction/oxidation half-cycles (RHC/OHC) were investigated using in situ X-ray absorption near-edge structure for Ce L3-edge, ultraviolet-visible, and infrared (IR) spectroscopies together with online analysis of outlet products (operando spectroscopy). The Ce4+(OH-) species, possibly adjacent to the phosphate species, are reduced by NO + NH3 to produce N2, H2O, and Ce3+ species (RHC). The Ce3+ species is reoxidized by aqueous O2 (OHC). The results from IR spectroscopy suggest that the RHC initiates with the reaction between NO and Ce4+(OH-) to yield Ce3+ and gaseous HONO, which then react with NH3 to produce N2 and H2O via NH4NO2 intermediates.

Accelerated discovery of multi-elemental reverse water-gas shift catalysts using extrapolative machine learning approach.

Designing novel catalysts is key to solving many energy and environmental challenges. Despite the promise that data science approaches, including machine learning (ML), can accelerate the development of catalysts, truly novel catalysts have rarely been discovered through ML approaches because of one of its most common limitations and criticisms-the assumed inability to extrapolate and identify extraordinary materials. Herein, we demonstrate an extrapolative ML approach to develop new multi-elemental reverse water-gas shift catalysts. Using 45 catalysts as the initial data points and performing 44 cycles of the closed loop discovery system (ML prediction + experiment), we experimentally tested a total of 300 catalysts and identified more than 100 catalysts with superior activity compared to those of the previously reported high-performance catalysts. The composition of the optimal catalyst discovered was Pt(3)/Rb(1)-Ba(1)-Mo(0.6)-Nb(0.2)/TiO2. Notably, niobium (Nb) was not included in the original dataset, and the catalyst composition identified was not predictable even by human experts.

Prediction of Stable Surfaces of Metal Oxides through the Unsaturated Coordination Index.

This study proposes the unsaturated coordination index, σ, as a potential descriptor of the stability of metal-oxide surfaces cleaved from bulk. The value of σ, the number of missing bonds per unit area, can be obtained very quickly using only crystallographic data, namely, the bulk geometry. The surface energies of various binary oxides, with and without atom relaxation, were calculated. Their correlations with σ had good coefficients of determination (R2) values, particularly in high-symmetry crystals. The proposed descriptor is very useful for an initial evaluation of stable metal-oxide surfaces without conducting any surface model calculations.

Bifunctionality of Re Supported on TiO2 in Driving Methanol Formation in Low-Temperature CO2 Hydrogenation.

Low temperature and high pressure are thermodynamically more favorable conditions to achieve high conversion and high methanol selectivity in CO2 hydrogenation. However, low-temperature activity is generally very poor due to the sluggish kinetics, and thus, designing highly selective catalysts active below 200 °C is a great challenge in CO2-to-methanol conversion. Recently, Re/TiO2 has been reported as a promising catalyst. We show that Re/TiO2 is indeed more active in continuous and high-pressure (56 and 331 bar) operations at 125-200 °C compared to an industrial Cu/ZnO/Al2O3 catalyst, which suffers from the formation of methyl formate and its decomposition to carbon monoxide. At lower temperatures, precise understanding and control over the active surface intermediates are crucial to boosting conversion kinetics. This work aims at elucidating the nature of active sites and active species by means of in situ/operando X-ray absorption spectroscopy, Raman spectroscopy, ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Transient operando DRIFTS studies uncover the activation of CO2 to form active formate intermediates leading to methanol formation and also active rhenium carbonyl intermediates leading to methane over cationic Re single atoms characterized by rhenium tricarbonyl complexes. The transient techniques enable us to differentiate the active species from the spectator one on TiO2 support, such as less reactive formate originating from spillover and methoxy from methanol adsorption. The AP-XPS supports the fact that metallic Re species act as H2 activators, leading to H-spillover and importantly to hydrogenation of the active formate intermediate present over cationic Re species. The origin of the unique reactivity of Re/TiO2 was suggested as the coexistence of cationic highly dispersed Re including single atoms, driving the formation of monodentate formate, and metallic Re clusters in the vicinity, activating the hydrogenation of the formate to methanol.

Dynamic Behavior of Intermediate Adsorbates to Control Activity and Product Selectivity in Heterogeneous Catalysis: Methanol Decomposition on Pt/TiO2(110).

Dynamic behavior of intermediate adsorbates, such as diffusion, spillover, and reverse spillover, has a strong influence on the catalytic performance in oxide-supported metal catalysts. However, it is challenging to elucidate how the intermediate adsorbates move on the catalyst surface and find active sites to give the corresponding products. In this study, the effect of the dynamic behavior of methoxy intermediate on methanol decomposition on a Pt/TiO2(110) surface has been clarified by combination of scanning tunneling microscopy (STM), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations. The methoxy intermediates were formed by the dissociative adsorption of methanol molecules on Pt nanoparticles at room temperature followed by spillover to the TiO2(110) support surface. TPD results showed that the methoxy intermediates were thermally decomposed at >350 K on the Pt sites to produce CO (dehydrogenation) and CH4 (C-O bond scission). A decrease of the Pt nanoparticle density lowered the activity for the decomposition reaction and increased the selectivity toward CH4, which indicates that the reaction is controlled by diffusion and reverse spillover of the methoxy intermediates. Time-lapse STM imaging and DFT calculations revealed that the methoxy intermediates migrate on the five-fold coordinated Ti (Ti5c) sites along the [001] or [11¯0] direction with the aid of hydrogen adatoms bonded to the bridging oxygens (Obr) and can move over the entire surface to seek and find active Pt sites. This work offers an in-depth understanding of the important role of intermediate adsorbate migration in the control of the catalytic performance in oxide-supported metal catalysts.

Designing main-group catalysts for low-temperature methane combustion by ozone.

The catalytic combustion of methane at a low temperature is becoming increasingly key to controlling unburned CH4 emissions from natural gas vehicles and power plants, although the low activity of benchmark platinum-group-metal catalysts hinders its broad application. Based on automated reaction route mapping, we explore main-group elements catalysts containing Si and Al for low-temperature CH4 combustion with ozone. Computational screening of the active site predicts that strong Brønsted acid sites are promising for methane combustion. We experimentally demonstrate that catalysts containing strong Bronsted acid sites exhibit improved CH4 conversion at 250 °C, correlating with the theoretical predictions. The main-group catalyst (proton-type beta zeolite) delivered a reaction rate that is 442 times higher than that of a benchmark catalyst (5 wt% Pd-loaded Al2O3) at 190 °C and exhibits higher tolerance to steam and SO2. Our strategy demonstrates the rational design of earth-abundant catalysts based on automated reaction route mapping.

Molybdenum Oxide Constructed by {Mo6O21}6- Pentagonal Unit Assembly and Its Redox Properties.

Molybdenum oxides are widely used in various fields due to their electronic and structural characteristics. These materials can generate lattice oxygen defects by reduction treatments, which sometimes play central roles in various applications. However, little has been understood about their properties since it is difficult to increase the amount of lattice oxygen defects due to the crystal structure changes in most cases. Here, we report a new class of high-dimensionally structured Mo oxide (HDS-MoOx) constructed by the random assembly of {Mo6O21}6- pentagonal units (PUs). Since the PU is a stable structural unit, the structural network based on the PU hardly caused structural changes to make the lattice oxygen defects vanish. Consequently, HDS-MoOx could generate a substantial amount of lattice oxygen defects, and their amount was controllable, at least in the range of MoO2.64-MoO3.00. HDS-MoOx was more redox active than typical Mo oxide (α-MoO3) and demonstrated an oxidation ability for gas-phase isopropanol oxidation under the reaction conditions, whereas α-MoO3 affords no oxidation products.

Surface Engineering of Titania Boosts Electroassisted Propane Dehydrogenation at Low Temperature.

Electric field catalysis using surface proton conduction, in which proton hopping and collision on the reactant are promoted by external electricity, is a promising approach to break the thermodynamic equilibrium limitation in endothermic propane dehydrogenation (PDH). This study proposes a catalyst design concept for more efficient electroassisted PDH at low temperature. Sm was doped into the anatase TiO2 surface to increase surface proton density by charge compensation. Pt-In alloy was deposited on the Sm-doped TiO2 for more favorable proton collision and selective propylene formation. The catalytic activity in electroassisted PDH drastically increased by doping an appropriate amount of Sm (1 mol % to Ti) where the highest propylene yield of 19.3 % was obtained at 300 °C where the thermodynamic equilibrium yield was only 0.5 %. Results show that surface proton enrichment boosts alkane dehydrogenation at low temperature.