RESUMEN
Although the associations between a patient's body mass index (BMI) and metabolic diseases, as well as their breath test results, have been studied, the relationship between breath hydrogen/methane levels and metabolic diseases needs to be further clarified. We aimed to investigate how the composition of exhaled breath gases relates to metabolic disorders, such as diabetes mellitus, dyslipidemia, hypertension, and nonalcoholic fatty liver disease (NAFLD), and their key risk factors. An analysis was performed using the medical records, including the lactulose breath test (LBT) data of patients who visited the Ajou University Medical Center, Suwon, Republic of Korea, between January 2016 and December 2021. The patients were grouped according to four different criteria for LBT hydrogen and methane levels. Of 441 patients, 325 (72.1%) had positive results for methane only (hydrogen < 20 parts per million [ppm] and methane ⩾ 3 ppm). BMIs and NAFLD prevalence were higher in patients with only methane positivity than in patients with hydrogen and methane positivity (hydrogen ⩾ 20 ppm and methane ⩾ 3 ppm). According to a multivariate analysis, the odds ratio of only methane positivity was 2.002 (95% confidence interval [CI]: 1.244-3.221,P= 0.004) for NAFLD. Our results demonstrate that breath methane positivity is related to NAFLD and suggest that increased methane gas on the breath tests has the potential to be an easily measurable biomarker for NAFLD diagnosis.
Asunto(s)
Pruebas Respiratorias , Metano , Enfermedad del Hígado Graso no Alcohólico , Humanos , Pruebas Respiratorias/métodos , Enfermedad del Hígado Graso no Alcohólico/metabolismo , Enfermedad del Hígado Graso no Alcohólico/diagnóstico , Metano/análisis , Femenino , Masculino , Persona de Mediana Edad , República de Corea/epidemiología , Adulto , Índice de Masa Corporal , Hidrógeno/análisis , Anciano , Factores de Riesgo , EspiraciónRESUMEN
In this study, a subminiature implantable capacitive pressure sensor is proposed for biomedical applications. The proposed pressure sensor comprises an array of elastic silicon nitride (SiN) diaphragms formed by the application of a polysilicon (p-Si) sacrificial layer. In addition, using the p-Si layer, a resistive temperature sensor is also integrated into one device without additional fabrication steps or extra cost, thus enabling the device to measure pressure and temperature simultaneously. The sensor with a size of 0.5 × 1.2 mm was fabricated using microelectromechanical systems (MEMS) technology and was packaged in needle-shaped metal housing that is both insertable and biocompatible. The packaged pressure sensor immersed in a physiological saline solution exhibited excellent performance without leakage. The sensor achieved a sensitivity of approximately 1.73 pF/bar and a hysteresis of about 1.7%, respectively. Furthermore, it was confirmed that the pressure sensor operated normally for 48 h without experiencing insulation breakdown or degradation of the capacitance. The integrated resistive temperature sensor also worked properly. The response of the temperature sensor varied linearly with temperature variation. It had an acceptable temperature coefficient of resistance (TCR) of approximately 0.25%/°C.
RESUMEN
Background: Studies on the risk of mercury (Hg) in Korean fishery products focus primarily on total Hg levels as opposed to methylmercury (MeHg) levels. None of the few studies on MeHg in tuna investigated tuna from Japanese restaurants. Few have evaluated lead (Pb), cadmium (Cd) and arsenic (As) in tuna. Thus, this study aimed to conduct a risk assessment by evaluating heavy metal concentrations in tuna from Japanese restaurants. Methods: Thirty-one tuna samples were collected from Japanese restaurants in the Republic of Korea. They were classified according to region and species. The concentration of heavy metals in the samples was analyzed using the Ministry of Food and Drug Safety Food Code method. The rate of exceedance of maximum residue levels (MRLs) and the risk compared to the provisional tolerable weekly intake (PTWI) set by the Joint Food and Agriculture Organization/World Health Organization Expert Committee on Food Additives (%PTWI) were evaluated for risk assessment. Results: The mean of MeHg, Pb, Cd and As concentrations were 0.56 ± 1.47 mg/kg, 33.95 ± 3.74 µg/kg, 14.25 ± 2.19 µg/kg and 1.46 ± 1.89 mg/kg, respectively. No sample exceeded the MRLs of Pb and Cd, but 9.7% of the samples exceeded the MRL of MeHg. The %PTWIs of MeHg, Pb, Cd and As were 4.2037, 0.0162, 0.0244 and 1.1627, respectively. The %PTWI of MeHg by age group and sex was highest among men aged 19-29 years (10.6494), followed by men aged 30-49 years (7.2458) and women aged 19-29 years (4.8307). Conclusions: We found that 3 out of 31 samples exceeded the MRL of MeHg. The %PTWI of MeHg showed significant differences based on age and sex, and the value was likely to exceed a safe level depending on individuals' eating behaviors. Therefore, improved risk management for MeHg is required.
RESUMEN
Erection measurements are the most important indicator of male urological disease diagnosis, treatment, and results. Rigiscan has been used widely in studies and diagnoses for nocturnal penile tumescence for evaluating erectile dysfunction by measuring the number and timing of erectile dysfunctions during sleep. However, this device has limitations such as the weight and bulk of the device and has been questioned for its role as a standard for ED Erectile Dysfunction (ED) diagnosis. In this study, we propose a real-time wearable monitoring system that can quantitatively measure the length and circumference of the penis using electronic textiles (E-textile) and carbon nanotube (CNT) sensors. The E-textile sensor is used to measure the length, circumference, and gradient with portability, convenience, and comfort. Sensors were created by coating CNTs on latex for flexibility. The CNT-based latex condom-type sensor in our proposed system shows the length, circumference, and curvature measurements with changes in resistance, and the E-textile performance shows a 1.44% error rate and a cavity radius of 110 to 300. The results of this conceptual study are for supplementary sensor development with a combination of new technologies with alternatives or existing methods for measuring erection function.
Asunto(s)
Disfunción Eréctil , Nanotubos de Carbono , Dispositivos Electrónicos Vestibles , Humanos , Masculino , Erección Peniana , TextilesRESUMEN
In this study, a microelectromechanical system (MEMS) two-dimensional (2D) wind direction and wind speed sensor consisting of a square heating source and four thermopiles was manufactured using the heat detection method. The heating source and thermopiles of the manufactured sensor must be exposed to air to detect wind speed and wind direction. Therefore, there are concerns that the sensor could be contaminated by deposition or adhesion of dust, sandy dust, snow, rain, and so forth, in the air, and that the membrane may be damaged by physical shock. Hence, there was a need to protect the heating source, thermopiles, and the membrane from environmental and physical shock. The upper protective coating to protect both the heating source and thermopiles and the lower protective coating to protect the membrane were formed by using high-molecular substances such as SU-8, Teflon and polyimide (PI). The sensor characteristics with the applied protective coatings were evaluated.
RESUMEN
OBJECTIVE: The purpose of the present study was to determine the prognostic significance of the neutrophil-lymphocyte ratio (NLR) in recurrence of cervical intraepithelial neoplasia (CIN). METHODS: We evaluated the NLR as a prognostic marker in the entire cohort of 230 patients who had undergone surgical resection and were diagnosed with CIN. Subjects were categorized into two different groups based on the NLR (NLR-high and NLR-low) using cutoff values determined by receiver operating characteristic (ROC) analysis. The primary research objective for this study was to validate the impact of the NLR on recurrence-free survival (RFS) in patients with CIN. The secondary objective was to evaluate the impact of other hematologic parameters on RFS in CIN patients. RESULTS: Using the entire cohort, the most appropriate NLR cut-off value for CIN recurrence selected on the ROC curve was 2.1. The NLR-low and NLR-high groups included 167 (72.6%) and 63 patients (27.4%), respectively. According to Kaplan-Meier analysis, RFS rates during the entire follow-up period were considerably lower in the NLR-high group than in the NLR-low group (P = 0.0125). In multivariate survival analysis using Cox proportional hazard model, we identified the NLR, absolute eosinophil count (AEC), hemoglobin concentration, and mean corpuscular volume (MCV) as valuable prognostic factors that impact RFS. CONCLUSIONS: The NLR is an independent prognosticator for RFS following surgical resection in CIN patients. We also found that the AEC, hemoglobin level, and MCV were strongly associated with RFS, as determined by multivariate analysis using a Cox model. These hematological parameters might provide additional prognostic value beyond that offered by standard clinicopathologic parameters.
RESUMEN
BACKGROUND: Malignant ovarian tumor is one of the leading causes of worldwide cancer death. It is usually characterized by insidious onset and late diagnosis because of the absence of symptoms, allowing ovarian cancer cases to progress rapidly and become unresectable. The tumor suppressor, p53, plays an important role in regulating cell cycles and apoptosis. p53 is regulated by several molecules, and it interacts with other apoptotic proteins. OBJECTIVES: To compare the prognosis of ovarian serous carcinoma and evaluate the expression of DNA-PKcs, Akt3, GSK-3ß, and p53 in cancerous cells. MATERIAL AND METHODS: DNA-PKcs, Akt3, GSK-3ß, and p53 expression levels were scored using immunohistochemistry staining of tissue samples from 132 women with ovarian serous adenocarcinoma. Expression was confirmed by real-time RT-PCR. Analyses were stratified by age, tumor grades, cancer stages and serum CA 125 levels. RESULTS: Significant differences in DNA-PKcs, Akt3, and p53 expression were observed between participants with different stages and tumor grades of ovarian serous adenocarcinoma. DNA-PKcs and p53 expression increased along with increasing tumor grade. Meanwhile, DNA-PKcs, Akt3, and p53 expression increased along with increasing cancer stage, and with a decrease in 5-year overall survival rate. CONCLUSIONS: This study shows that elevated expression of DNA-PKcs, Akt3, and p53 in ovarian serous adenocarcinoma tissues are an indication of more advanced disease and worse prognosis.
Asunto(s)
Apoptosis , Cistadenocarcinoma Seroso/metabolismo , Proteína Quinasa Activada por ADN/metabolismo , Proteínas Nucleares/metabolismo , Neoplasias Ováricas/metabolismo , Proteínas Proto-Oncogénicas c-akt/metabolismo , Proteína p53 Supresora de Tumor/metabolismo , Antígeno Ca-125/sangre , Cistadenocarcinoma Seroso/genética , Cistadenocarcinoma Seroso/patología , Proteína Quinasa Activada por ADN/genética , Femenino , Regulación Neoplásica de la Expresión Génica , Glucógeno Sintasa Quinasa 3 beta/genética , Glucógeno Sintasa Quinasa 3 beta/metabolismo , Humanos , Inmunohistoquímica , Estimación de Kaplan-Meier , Persona de Mediana Edad , Clasificación del Tumor , Estadificación de Neoplasias , Proteínas Nucleares/genética , Neoplasias Ováricas/genética , Neoplasias Ováricas/patología , Pronóstico , Proteínas Proto-Oncogénicas c-akt/genética , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa , Proteína p53 Supresora de Tumor/genéticaRESUMEN
One of the key components of a chemical gas sensor is a MEMS micro-heater. Micro-heaters are used in both semiconductor gas sensors and NDIR gas sensors; however they each require different heat dissipation characteristics. For the semiconductor gas sensors, a uniform temperature is required over a wide area of the heater. On the other hand, for the NDIR gas sensor, the micro-heater needs high levels of infrared radiation in order to increase sensitivity. In this study, a novel design of a poly-Si micro-heater is proposed to improve the uniformity of heat dissipation on the heating plate. Temperature uniformity of the micro-heater is achieved by compensating for the variation in power consumption around the perimeter of the heater. With the power compensated design, the uniform heating area is increased by 2.5 times and the average temperature goes up by 40 °C. Therefore, this power compensated micro-heater design is suitable for a semiconductor gas sensor. Meanwhile, the poly-Si micro-heater without compensation shows a higher level of infrared radiation under equal power consumption conditions. This indicates that the micro-heater without compensation is more suitable for a NDIR gas sensor. Furthermore, the micro-heater shows a short response time of less than 20 ms, indicating a very high efficiency of pulse driving.
Asunto(s)
Gases/análisis , Calefacción/instrumentación , Sistemas Microelectromecánicos/instrumentación , Temperatura , Simulación por Computador , Electricidad , Diseño de Equipo , Análisis de Elementos Finitos , Rayos Infrarrojos , Análisis Numérico Asistido por ComputadorRESUMEN
A silicon nanowire-based sensor for biological application showed highly desirable electrical responses to either pH changes or receptor-ligand interactions such as protein disease markers, viruses, and DNA hybridization. Furthermore, because the silicon nanowire can display results in real-time, it may possess superior characteristics for biosensing than those demonstrated in previously studied methods. However, despite its promising potential and advantages, certain process-related limitations of the device, due to its size and material characteristics, need to be addressed. In this article, we suggest possible solutions. We fabricated silicon nanowire using a top-down and low cost micromachining method, and evaluate the sensing of molecules after transfer and surface modifications. Our newly designed method can be used to attach highly ordered nanowires to various substrates, to form a nanowire array device, which needs to follow a series of repetitive steps in conventional fabrication technology based on a vapor-liquid-solid (VLS) method. For evaluation, we demonstrated that our newly fabricated silicon nanowire arrays could detect pH changes as well as streptavidin-biotin binding events. As well as the initial proof-of-principle studies, C-reactive protein binding was measured: electrical signals were changed in a linear fashion with the concentration (1 fM to 1 nM) in PBS containing 1.37 mM of salts. Finally, to address the effects of Debye length, silicon nanowires coupled with antigen proteins underwent electrical signal changes as the salt concentration changed.
Asunto(s)
Técnicas Biosensibles/instrumentación , Proteína C-Reactiva/análisis , Electroquímica/instrumentación , Microelectrodos , Nanotecnología/instrumentación , Nanotubos/química , Técnicas Biosensibles/métodos , Electroquímica/métodos , Diseño de Equipo , Análisis de Falla de Equipo , Nanotecnología/métodos , Nanotubos/ultraestructura , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
A method to fabricate suspended silicon nanowires that are applicable to electronic and electromechanical nanowire devices is reported. The method allows for the wafer-level production of suspended silicon nanowires using anisotropic etching and thermal oxidation of single-crystal silicon. The deviation in width of the silicon nanowire bridges produced using the proposed method is evaluated. The NW field-effect transistor (FET) properties of the device obtained by transferring suspended nanowires are shown to be practical for useful functions.