Incorporation Modes of Iodate in Calcite.

Iodate (IO3-) incorporation in calcite (CaCO3) is a potential sequestration pathway for environmental remediation of radioiodine-contaminated sites (e.g., Hanford Site, WA), but the incorporation mechanisms have not been fully elucidated. Ab initio molecular dynamics (AIMD) simulations and extended X-ray absorption fine structure spectroscopy (EXAFS) were combined to determine the local coordination environment of iodate in calcite, the associated charge compensation schemes (CCS), and any tendency for surface segregation. IO3- substituted for CO32- and charge compensation was achieved by substitution of Ca2+ by Na+ or H+. CCS that minimized the I-Na/H distance or placed IO3- at the surface were predicted by density functional theory to be energetically favored, with the exception of HIO3, which was found to be metastable relative to the formation of HCO3-. Iodine K-edge EXAFS spectra were calculated from AIMD trajectories and used to fit the experimental spectrum. The best-fit combination consisted of a significant proportion of surface-segregated IO3- and charge compensation was predominantly by H+. Important implications are therefore that pH should strongly affect the extent of IO3- incorporation and that IO3- accumulated at the surface of CaCO3 particles may undergo mobilization under conditions that promote calcite dissolution. These impacts need to be considered in calcite-based iodate remediation strategies.

Importance of interlayer H bonding structure to the stability of layered minerals.

Layered (oxy) hydroxide minerals often possess out-of-plane hydrogen atoms that form hydrogen bonding networks which stabilize the layered structure. However, less is known about how the ordering of these bonds affects the structural stability and solubility of these minerals. Here, we report a new strategy that uses the focused electron beam to probe the effect of differences in hydrogen bonding networks on mineral solubility. In this regard, the dissolution behavior of boehmite (γ-AlOOH) and gibbsite (γ-Al(OH)3) were compared and contrasted in real time via liquid cell electron microscopy. Under identical such conditions, 2D-nanosheets of boehmite (γ-AlOOH) exfoliated from the bulk and then rapidly dissolved, whereas gibbsite was stable. Further, substitution of only 1% Fe(III) for Al(III) in the structure of boehmite inhibited delamination and dissolution. Factors such as pH, radiolytic species, and knock on damage were systematically studied and eliminated as proximal causes for boehmite dissolution. Instead, the creation of electron/hole pairs was considered to be the mechanism that drove dissolution. The widely disparate behaviors of boehmite, gibbsite, and Fe-doped boehmite are discussed in the context of differences in the OH bond strengths, hydrogen bonding networks, and the presence or absence of electron/hole recombination centers.

Computational Investigation of Technetium(IV) Incorporation into Inverse Spinels: Magnetite (Fe3O4) and Trevorite (NiFe2O4).

Iron oxides and oxyhydroxides play an important role in minimizing the mobility of redox-sensitive elements in engineered and natural environments. For the radionuclide technetium-99 (Tc), these phases hold promise as primary hosts for increasing Tc loading into glass waste form matrices, or as secondary sinks during the long-term storage of nuclear materials. Recent experiments show that the inverse spinel, magnetite [Fe(II)Fe(III)2O4], can incorporate Tc(IV) into its octahedral sublattice. In that same class of materials, trevorite [Ni(II)Fe(III)2O4] is also being investigated for its ability to host Tc(IV). However, questions remain regarding the most energetically favorable charge-compensation mechanism for Tc(IV) incorporation in each structure, which will affect Tc behavior under changing waste processing or storage conditions. Here, quantum-mechanical methods were used to evaluate incorporation energies and optimized lattice bonding environments for three different, charge-balanced Tc(IV) incorporation mechanisms in magnetite and trevorite (∼5 wt % Tc). For both phases, the removal of two octahedral Fe(II) or Ni(II) ions upon the addition of Tc(IV) in an octahedral site is the most stable mechanism, relative to the creation of octahedral Fe(III) defects or increasing octahedral Fe(II) content. Following hydration-energy corrections, Tc(IV) incorporation into magnetite is energetically favorable while an energy barrier exists for trevorite.

Technetium Incorporation into Goethite (α-FeOOH): An Atomic-Scale Investigation.

During the processing of low-activity radioactive waste to generate solid waste forms (e.g., glass), technetium-99 (Tc) is of concern because of its volatility. A variety of materials are under consideration to capture Tc from waste streams, including the iron oxyhydroxide, goethite (α-FeOOH), which was experimentally shown to sequester Tc(IV). This material could ultimately be incorporated into glass or alternative low-temperature waste form matrices. However, questions remain regarding the incorporation mechanism for Tc(IV) in goethite, which has implications for predicting the long-term stability of Tc in waste forms under changing conditions. Here, quantum-mechanical calculations were used to evaluate the energy of five different charge-compensated Tc(IV) incorporation scenarios in goethite. The two most stable incorporation mechanisms involve direct substitution of Tc(IV) onto Fe(III) lattice sites and charge balancing either by removing one nearby H(+) (i.e., within 5 Å) or by creating an Fe(III) vacancy when substituting 3 Tc(IV) for 4 Fe(III), with the former being preferred over the latter relative to gas-phase ions. When corrections for hydrated references phases are applied, the Fe(III)-vacancy mechanism becomes more energetically competitive. Calculated incorporation energies and optimized bond lengths are presented. Proton movement is observed to satisfy undercoordinated bonds surrounding Fe(III)-vacancies in the goethite structure.

Development of Online Spectroscopic pH Monitoring for Nuclear Fuel Reprocessing Plants: Weak Acid Schemes.

In nuclear fuel reprocessing, separating trivalent minor actinides and lanthanide fission products is extremely challenging and often necessitates tight pH control in TALSPEAK (Trivalent Actinide-Lanthanide Separation by Phosphorus reagent Extraction from Aqueous Komplexes) separations. In TALSPEAK and similar advanced processes, aqueous pH is one of the most important factors governing the partitioning of lanthanides and actinides between an aqueous phase containing a polyaminopolycarboxylate complexing agent and a weak carboxylic acid buffer and an organic phase containing an acidic organophosphorus extractant. Real-time pH monitoring would significantly increase confidence in the separation performance. Our research is focused on developing a general method for online determination of the pH of aqueous solutions through chemometric analysis of Raman spectra. Spectroscopic process-monitoring capabilities, incorporated in a counter-current centrifugal contactor bank, provide a pathway for online, real-time measurement of solution pH. The spectroscopic techniques are process-friendly and can be easily configured for online applications, whereas classic potentiometric pH measurements require frequent calibration/maintenance and have poor long-term stability in aggressive chemical and radiation environments. Raman spectroscopy discriminates between the protonated and deprotonated forms of the carboxylic acid buffer, and the chemometric processing of the Raman spectral data with PLS (partial least-squares) regression provides a means to quantify their respective abundances and therefore determine the solution pH. Interpretive quantitative models have been developed and validated under a range of chemical composition and pH conditions using a lactic acid/lactate buffer system. The developed model was applied to new spectra obtained from online spectral measurements during a solvent extraction experiment using a counter-current centrifugal contactor bank. The model predicted the pH of this validation data set within 11% for pH > 2, thus demonstrating that this technique could provide the capability of monitoring pH online in applications such as nuclear fuel reprocessing.

Conditions for critical effects in the mass action kinetics equations for water radiolysis.

We report on a subtle global feature of the mass action kinetics equations for water radiolysis that results in predictions of a critical behavior in H2O2 and associated radical concentrations. While radiolysis kinetics have been studied extensively in the past, it is only in recent years that high-speed computing has allowed the rapid exploration of the solution over widely varying dose and compositional conditions. We explore the radiolytic production of H2O2 under various externally fixed conditions of molecular H2 and O2 that have been regarded as problematic in the literature-specifically, "jumps" in predicted concentrations, and inconsistencies between predictions and experiments have been reported for α radiolysis. We computationally map-out a critical concentration behavior for α radiolysis kinetics using a comprehensive set of reactions. We then show that all features of interest are accurately reproduced with 15 reactions. An analytical solution for steady-state concentrations of the 15 reactions reveals regions in [H2] and [O2] where the H2O2 concentration is not unique-both stable and unstable concentrations exist. The boundary of this region can be characterized analytically as a function of G-values and rate constants independent of dose rate. Physically, the boundary can be understood as separating a region where a steady-state H2O2 concentration exists from one where it does not exist without a direct decomposition reaction. We show that this behavior is consistent with reported α radiolysis data and that no such behavior should occur for γ radiolysis. We suggest experiments that could verify or discredit a critical concentration behavior for α radiolysis and could place more restrictive ranges on G-values from derived relationships between them.

Photophysics and luminescence spectroelectrochemistry of [Tc(dmpe)3](+/2+) (dmpe = 1,2-bis(dimethylphosphino)ethane).

The ligand-to-metal charge transfer (LMCT) excited state luminescence of [Tc(dmpe)3](2+) (dmpe is 1,2-bis-(dimethylphosphino)ethane) has been measured in solution at room temperature and is compared to its Re analogue. Surprisingly, both [M(dmpe)3](2+)* (M = Re, Tc) species have extremely large excited-state potentials (ESPs) as oxidants, the highest for any simple coordination complex of a transition metal. Furthermore, this potential is available using a photon of visible light (calculated for M = Tc; E°'* = +2.48 V versus SCE; λmax = 585 nm). Open shell time-dependent density functional theory (TDDFT) calculations support the assignment of the lowest energy transition in both the technetium and rhenium complexes to be a doublet-doublet process that involves predominantly LMCT (dmpe-to-metal) character and is in agreement with past assignments for the Re system. As expected for highly oxidizing excited state potentials, quenching is observed for the excited states of both the rhenium and technetium complexes. Stern-Volmer analysis resulted in quenching parameters for both the rhenium and technetium complexes under identical conditions and are compared using Rehm-Weller analysis. Of particular interest is the fact that both benzene and toluene are oxidized by both the Re and Tc systems.