RESUMEN
Given the issues of soil cracking, poor water retention during drought, and erosion damage caused by rainfall, we conducted an in-depth study on the water retention properties, cracking resistance, and scouring resistance of biogel-amended clay using evaporation cracking and scouring tests. The hydrophysical properties and cohesive aggregation mechanism of biogel-amended clay were explored, and the results showed that the incorporation of biogel improved the water retention, cracking resistance, and scour resistance of the clay samples. With an increase in the biogel content, the biogel mucous membrane inside the samples improved the cohesion between soil particles, reduced the generation and development of cracks, and improved the cracking resistance. There was no significant cracking of the samples after the biogel content reached 0.3%, which changed the migration of water in the sample, prevented water evaporation, and improved the water retention of the clay samples. Biofilm can change the migration of water in the sample, prevent some evaporation, and reduce the evaporation rate. To a certain extent, it can enhance the water retention capacity of the sample. Enhanced biofilm content significantly reduced scouring in the process of rainfall and runoff erosion of the sample, and biofilm content of 0.2% significantly reduced the surface of the specimen damaged by erosion. The hydrophysical properties of the composite-adhesive-amended clay samples were significantly improved compared with those of the single-bioadhesive-amended clay samples.
RESUMEN
Drying-induced cracks and precipitation-induced erosion negatively impact the performance of soils in the context of extreme weather events. This study introduces two effective and sustainable materials, microbial biopolymer (MB) and palm fibers (PF), for cracking and erosion control in the sand-clay mixtures. A series of desiccation cracking tests, erosion tests, and SEM tests were conducted to evaluate the effectiveness of the treatment. The results showed that MB could significantly improve the resistance of the soil to cracking and scouring, and the improvement increased with increasing MB content. The optimum MB content was 0.15 % to achieve the maximum cracking and erosion resistance. For samples with varying sand contents, 0.15 % MB addition reduced the crack ratio, total crack length, and accumulative erosion ratio by 19.55 %-96.91 %, 4.22 %-99.58 %, and 57.88 %-89.53 %, respectively. In addition, PF positively affected the anti-crack and anti-erosion properties of the soil, and the application of 0.60 % PF had the best performance for both improvements. The cracks in the soils were mostly fine and shallow with the addition of 0.60 % PF, and therefore, the accumulative erosion ratio decreased by 44.18 %-62.76 % for samples with varying sand contents. Compared to the untreated soil, the degree of cracking and erosion was less due to the formation of a structure with more macropores and a sand skeleton in the treated samples with higher sand content. MB addition provides strong inter-particle bonding connections and a hydrophilic crust structure to improve the soils' resistance to cracking and erosion, while the fiber reinforcement effect benefits from interfacial friction and spatial restriction effects. This study provides mechanistic interpretations of desiccation cracking and erosion behavior in sand-clay mixtures under different treatments. It may guide the design of low-carbon technologies for geotechnical engineering applications.
Asunto(s)
Arena , Suelo , Arcilla , Suelo/química , BiopolímerosRESUMEN
Natural sand has a loose and porous structure with low strength, and is prone to many geoengineering problems that cause huge losses. In this study, an organic polymer-polymer-fiber blend was used to improve the strength of sand. Using a series of laboratory and numerical simulation tests, researchers have investigated the microdamage behavior of an organic polymer and fiber-treated sand in various types of mechanical tests and explored the improvement mechanism. The results showed that the polymer- and fiber-treated sand enhanced the integrity and exhibited differential damage responses under different test conditions. The increase in polymer content induced uniform force transfer, leading to a wider range of particle motion and crack initiation, whereas the fibers adhered and confined the surrounding particles, inducing an arching force chain and dispersive/buckling cracking. Polymer- and fiber-treated sands increased their energy-carrying capacity and improved their energy release, which affected the damage characteristics. Organic polymers, fibers, and sand particles were wrapped around each other to form an effective interlocking structure, which enhances the integrity and mechanical properties of sand. This study provides novel ideas and methods in the polymer-fiber composite treatment of sand in the microscopic field.
RESUMEN
Clay is one of the important base materials in slope restoration. The adhesion of clay-rock interface plays a decisive role in the repairing effect on rock slopes. Fibers and polymers are widely used as a clay improvement method in rock slope repair. In this paper, the friction effect of sisal fiber and polyvinyl acetate (PVAc)-reinforced clay was studied through the design of an indoor rock-like interface sliding model test. Using modelled test results and scanning electron microscope (SEM) images, the reinforced clay was analyzed. The test results showed that the critical sliding angle and maximum static friction force of clay decreased with the increase of moisture content. An excess of fiber content and moisture content weakens the coupling effect of fiber-anchoring clay. Fiber content of 0.8% and PVAc content of 2% had the best effect on enhancing the sliding resistance of clay and provided good adhesion for dangerous interfaces of rock slope at 35° and 45°, respectively. PVAc formed a three-dimensional networked elastic membrane structure to improve the skid resistance and dynamic friction coefficient of the clay. The results provide an effective way for soil improvement and ecological restoration.
RESUMEN
Considering that, in the context of the ecological restoration of a large number of exposed rock slopes, it is difficult for existing artificial soil to meet the requirements of mechanical properties and ecological construction at the same time, this paper investigates the stabilization benefits of polyvinyl acetate and attapulgite-treated clayey soil through a series of laboratory experiments. To study the effectiveness of polyvinyl acetate (PVA) and attapulgite as soil stabilizer, a triaxial strength test, an evaporation test and a vegetation growth test were carried out on improved soil with different amounts of PVA content (0, 1%, 2%, 3%, and 4%) and attapulgite replacement (0, 2%, 4%, 6%, and 8%). The results show that the single and composite materials of polyvinyl acetate and attapulgite can increase the peak deviator stress of the sample. The addition of polyvinyl acetate can improve the soil strength by increasing the cohesion of the sample; the addition of attapulgite improves the soil strength mainly by increasing the internal friction angle of the sample. The strength of the composite is greatly improved by increasing the cohesion and internal friction angle of the sample at the same time. The effect of adding materials increased significantly with increasing curing age. Moreover, polyvinyl acetate and attapulgite improve the soil water retention of the soil by improving the water-holding capacity, so that the soil can still ensure the good growth of vegetation under long-term drought conditions. The scanning electron microscopy (SEM) images indicated that the PVA and attapulgite of soil affect the strength characteristics of soil specimens by the reaction of PVA and water, which changes the structure of the soil and, by the interweaving of attapulgite soil particles, acts as the skeleton of the aggregate. Overall, PVA and attapulgite can effectively increase clayey soil stability by improving the cohesive force and internal friction angle of clayey soil.
RESUMEN
External-soil spray seeding (ESSS) is a method often used for the ecological restoration of bare rock slopes. However, the direct use of ESSS is normally less satisfactory due to the erosion of sprayed soil and low survival rate of the plants on rock slopes. This study proposes a novel approach to addressing this issue through the combined use of ESSS with polyvinyl acetate (PVA) based soil stabilization. The PVA solutions are added to the soil to stabilize soil and improve soil strength while possessing high water and nutrient retention favorable for plant growth. A series of experimental tests on the mechanical properties, water stability, erosion resistance, water retention, and plant growth of the PVA-stabilized soil were conducted to assess the efficacy of the proposed method. The results showed that the proposed method could be promising for rock slope ecological restoration. A proper curing time (e.g., >3 days) was required to achieve beneficial effects of PVA on the soil properties. A shorter curing time would otherwise result in the decrease in the strength with the increased PVA content. It was found that the optimum PVA content was 3% for achieving the maximum water stability, erosion resistance, water retention, and plant growth. The cohesion increased by up to 50% and the internal friction angle increased by 3.5° compared to the natural soil. The disintegration rate of the stabilized soil was generally < 3e-3%/min. The maximum reduction in erosion was up to 83% when the PVA content ≥3%. The mechanisms behind the findings are also discussed.
Asunto(s)
Polivinilos , Suelo , Plantas , AguaRESUMEN
There has been a growing interest in polymer applied for soil reinforcement in recent years. However, there little attention has been paid to the effects of polymer on soil cracking behavior, and cracks significantly change soil strength and hydraulic properties and alter reinforcement effectiveness. This study investigated the desiccation cracking behavior of polyurethane (PU) and polyacrylamide (PAM) admixed clayey soils with different polymer concentrations by performing desiccation cracking tests. Scanning electron microscope (SEM) observation was also carried out to obtain the internal structure of these soils. The results show that PU and PAM addition both prolonged the initial evaporation stage, accelerated later evaporation processes, and the effects were related to polymer concentration. Final cracks morphology analyses show that PAM addition slightly reduced the cracking and crushing degree and kept the soil relatively intact, while PU addition slightly enhanced the cracking and crushing degree of soil. In addition, PU and PAM addition both increased the width and length of cracks. The scanning electron microscopy (SEM) analyses show that the effects of polymer on soil evaporation and cracking could be concluded as: (1) storing water in voids, (2) influencing water immigration channel, (3) providing space for soil shrinkage, and (4) enhancing the connection between aggregates, which did not fully come into play because of the existence of hydrogel form. These achievements provide a certain basis for the research of desiccation cracking behavior of polymer treated soil and make significant sense for the safe and effective running of related projects.
RESUMEN
As renewable and environment-friendly materials, coir and sisal natural fibers can be used in soil reinforcement with minimum cost and other benefits. In this study, we focused on their improvements of unconfined compressive properties of polymer treated sand. In total, 36 groups of unconfined compressive strength tests, combined with X-ray diffraction and scanning electron microscope investigations were performed. We had studied the effects of polymer and fiber contents, and fiber types on the reinforcement effectiveness. The results showed that both coir and sisal fiber can improve the mechanical properties and microstructure of treated sand. In terms of strength properties, sisal fiber inclusion was better than coir fiber, while both have a similar reinforcement benefit on soil ductile behaviors. The strength and compressive energy increased with an increment in polymer and fiber content. The reinforced sand can have up to 1 MPa compressive strength and 140 kPa compressive energy for coir fiber inclusion, while 1.2 MPa and 170 kPa, respectively, for sisal fiber. The axial stress-strain characteristics and failure patterns were also improved, and the brittle index decreased toward zero, which suggests an increasing ductile. The polymer membrane enwrapping and bonding sand grains, and the network structure built by fiber crossing and overlapping among sand grains, as well as the interfacial attachment conferred by polymer between sand grains and fiber, all contributed to the reinforcement of treated sand.
RESUMEN
The significant criterion for evaluating the merits of a new type of high molecular polymer lies in its engineering properties and eco-friendliness. The focus of this study was to determine the effects of preparation conditions on the viscosity of the polyvinyl acetate (PVAc) emulsion, including reaction temperature (Tr), initiator concentration (CAPS), monomer concentration (CVA), pH value, and degree of dilution (Ddi). Based on the results of a series of laboratory tests, the range of viscosity value of PVAc was obtained under different conditions, and one set of viscosity values out of these was applied to soil reinforcement tests. Meanwhile, based on the test results, the engineering properties of PVAc solution were evaluated using strength and moisture retention tests, and the reinforcement mechanism was analyzed using scanning electron microscopy (SEM). In addition, it was proven through a vegetation growth test that the PVAc was eco-friendly.
RESUMEN
The mechanical properties of sandy soil can be effectively improved by the incorporation of water-based polymer and glass fibers. In order to study the reinforcement effects of a type of water-based organic polymer and fiber glass on sand, three strength tests (unconfined compression test, direct shear test and tensile test) and scanning electron microscopy were carried out. A series of polymer content, fiber content and dry density were selected for the tests. The results revealed that the composite reinforcement of water-based organic polymer and fiber glass can improve the strength. With an increase in polymer content and fiber content, the unconfined compression strength, the cohesion, and the tensile strength increase. The internal friction angles maintain a relatively stable state. All three strength properties increase with an increase in dry density. The results can be considered as the reference for sand reinforced engineering.
RESUMEN
Due to weak physical properties of sand, chemical reinforcement methods are widely used to improve sand properties to meet the engineering requirements. However, most of the traditional additives cause environmental problems. Therefore, non-traditional additives such as liquid polymers, enzymes, ions, and lignin derivatives have been studied extensively. In this study, organic polymer is used as a soil stabilizer to reinforce the sand. To evaluate the effectiveness of the organic polymer as soil stabilizer, a series of unconfined compression strength (UCS) tests, direct shear tests, and tensile tests were carried out on reinforced sand with different polymer concentrations and dry densities of sand. The reinforcement mechanism was analysed with scanning electron microscopy (SEM) images. The results indicated that the polymer concentration and dry density of sand had significant effects on the strength characteristics of reinforced sand specimens. The unconfined compressive strength, cohesion, and tensile strength of specimens with the same dry density increased with the increasing polymer concentration. The polymer membranes-formed by the mixture of polymer and water-enwrap the sand particles and interlink them to form a stable structure. The efficiency of this stabilization changed with dry sand density.
RESUMEN
Physical and chemical reinforcements are commonly used to improve sand properties for engineering requirements. Many researchers have concluded that composite reinforcement can greatly improve sand property strength. In this paper, polyurethane organic polymer (PU) and polypropylene fiber (PF) were used to reinforce sand. It is found that composite reinforcement has great effects on tensile strength. A series of direct tensile tests were conducted to demonstrate this reinforcement and to investigate the effects of PF content, PU content, dry density, and curing time. Additionally, the reinforcement mechanism was analyzed by scanning electron microscope images. The tensile strength increases with curing time until it reaches a plateau. The composite reinforcement improves the tensile strength exponentially with the increase of PF and PU contents. For the effect due to dry density, the tensile strength first increased and then decreased with the peak at approximately 1.55 g/cm³. Through the interaction force among fibers and sand particles and the bonding force of polymer among sand particles, tensile strength of reinforced sand is greatly improved.