Fixed-Dose Combination of Dapagliflozin + Sitagliptin + Metformin in Patients with Type 2 Diabetes Poorly Controlled with Metformin: Phase 3, Randomized Comparison with Dual Combinations.

INTRODUCTION: This study compared efficacy and safety of triple drug fixed-dose combination (FDC) of dapagliflozin (DAPA) + sitagliptin (SITA) + metformin (MET) extended release (ER) with SITA + MET sustained release (SR) and DAPA + MET ER in patients with type 2 diabetes poorly controlled with metformin. METHODS: This phase 3, randomized, open-label, active-controlled study included adult patients with glycated hemoglobin (HbA1c) ≥ 8% (64 mmol/mol) and ≤ 11% (97 mmol/mol), randomized in 1:1:1 ratio to receive either FDC of DAPA + SITA + MET ER (10 mg + 100 mg + 1000 mg) tablets once daily (n = 137) or co-administration of SITA + MET SR (100 mg + 1000 mg) tablets once daily (n = 139) or FDC of DAPA + MET ER (10 mg + 1000 mg) tablets once daily (n = 139). Primary endpoint was mean change in HbA1c from baseline to week 16. RESULTS: Mean baseline HbA1c was approximately 9% (75 mmol/mol) in each treatment group. At week 16, adjusted mean reduction in HbA1c from baseline was significantly greater with DAPA + SITA + MET ER (- 1.73% [- 19.0 mmol/mol]) compared to SITA + MET SR (- 1.28% [- 14.1 mmol/mol]; difference of - 0.46% [- 5.1 mmol/mol], p < 0.001) and DAPA + MET ER (- 1.33% [- 14.6 mmol/mol]; difference - 0.4% [4.4 mmol/mol], p < 0.001). Similarly, at week 12, reduction in HbA1c from baseline was significantly greater with DAPA + SITA + MET ER compared to SITA + MET SR (p = 0.0006) and DAPA + MET ER (p = 0.0276). At week 16, DAPA + SITA + MET ER showed significant reduction in postprandial blood glucose compared to DAPA + MET ER (p = 0.0394) and significant reduction in fasting blood glucose with DAPA + SITA + MET ER compared to SITA + MET SR (p = 0.0226). The proportion of patients achieving HbA1c < 7.0% (53 mmol/mol) at week 16 was significantly higher with DAPA + SITA + MET ER (38.5%) versus SITA + MET SR (12.8%) (p < 0.001) and DAPA + MET ER (21.3%) (p = 0.0023). All study medications were well tolerated. CONCLUSION: Triple FDC of DAPA + SITA + MET ER tablets once daily was significantly better in achieving glycemic control versus dual combination once daily in patients with type 2 diabetes poorly controlled with metformin without any significant safety concerns. TRIAL REGISTRATION: CTRI/2021/11/038176, registered on 22 November 2021.

Type 2 diabetes is a progressive disease in which the risks of microvascular and macrovascular complications and mortality are strongly associated with hyperglycemia. Achieving glycemic control remains the main goal of treatment to prevent these complications. Estimates in 2019 showed that 77 million individuals had diabetes in India, which is expected to rise over 134 million by 2045. Considering the progressive nature of the disease, many guidelines recommend use of dual or triple drug therapy based on glycated hemoglobin (HbA1c) level. Use of fixed-dose combination (FDC) helps to improve therapy compliance and can provide optimum therapeutic benefits. Mechanisms of action of dipeptidyl peptidase 4 (DPP4) and sodium­glucose cotransporter 2 (SGLT2) inhibitors are complementary to that of metformin with low risk of hypoglycemia. Studies have shown beneficial effects of adding both DPP4 inhibitors and SGLT2 inhibitors after metformin monotherapy. This phase 3 study was designed to assess efficacy and safety of triple FDC of dapagliflozin + sitagliptin + metformin extended release in comparison with combipack of sitagliptin + metformin sustained release and FDC of dapagliflozin + metformin ER in patients with type 2 diabetes inadequately controlled with metformin monotherapy. The study demonstrated superiority of triple FDC of dapagliflozin + sitagliptin + metformin ER over dual combinations in terms of reduction in HbA1c and percentage of patients achieving target HbA1c at the end of week 16. The current study provides evidence for considering triple FDC of dapagliflozin + sitagliptin + metformin ER as an alternative option with minimal risk of hypoglycemia and weight gain, while considering oral triple-combination therapy for patients to achieve their glycemic target.

A randomized controlled pilot study of add-on therapy of CIM-MEG19 (standardized Andrographis paniculata formulation) in mild to moderate COVID-19.

Background: Traditional knowledge and scientific shreds of evidence strongly support the repurpose of Kalmegh (Andrographis paniculata, CIM-MEG19) as an alternate therapy for prophylactic management and treatment of severe acute respiratory syndrome coronavirus (SARS-CoV) and associated health disorders. Purpose: The study aimed to assess the efficacy and safety of the CIM-MEG19 (standardized A. paniculata extract formulation), a proprietary Ayurvedic medicine in the COVID-19 management, clinical recovery, and outcomes in terms of hospitalization days as well as any sign of severity due to drug-drug interaction between CIM-MEG19 TM and standard of care (SoC). Methods: A randomized, parallel-group, active-controlled interventional pilot clinical study was conducted. The Group-A subjects were assigned to CIM-MEG19 add-on to SoC treatment using modern medicine without antiviral drug whereas Group-B patients with SoC treatment using modern medicine and recommended antiviral drug for COVID-19 management. Eighty RTPCR (real-time polymerase chain reaction) positive and eligible COVID-19 patients of age >18 years, having mild or moderate severity, were enrolled. Results: Clinical improvement in reduction of symptoms showed significant (p<0.0001) results in the average days in subjects of group-A (Investigational intervention arm) compared to Group B (SoC). The RT-PCR investigation exhibited COVID negative for 50 % in CIM-MEG19 add-on and 47% in SoC treatment after 8-11 days. Similarly, biochemical investigations showed that CIM-MEG19 group-A had a significant (p ≤ 0.05) effect on C-Reactive Protein (CRP) and Interleukin-6 (IL-6) after 14 days of treatment. Additionally, improvement in D-Dimer, ESR, and LDH in CIM-MEG19 add-on therapy was also observed. Conclusions: The study demonstrated an excellent safety profile, declining the severity of the infection and halting the disease advancement/progression. CIM-Meg19 might be used as a potential natural drug for treating COVID-19.

Efficacy and safety of polyherbal formulation as an add-on to standard-of-care in mild-to-moderate COVID-19: A randomized, double-blind, placebo-controlled trial.

Background: Novel corona virus disease-2019 (COVID-19) pandemic is a significant contributor to morbidity and mortality in affected individuals. Modulating the immune response in COVID-19 is now an established treatment approach. Polyherbal formulations have long been assessed for their potential immune modulating effects and are expected to be beneficial on COVID-19. Methods: This study aims at assessing the efficacy and safety of polyherbal formulation (referred as IP) in comparison to placebo, as add on to the standard of care (SOC), in patients with mild to moderate COVID-19 patients. Hospitalized RT-PCR positive patients were randomized to either SOC + IP or SOC + Placebo arm. The viral load (VL) was assessed using quantitative reverse transcription-polymerase chain reaction (qRT-PCR). Immunological parameters were also assessed. The clinical improvement was assessed using a numeric rating scale (NRS) and WHO ordinal scale, and follow-up period was 30 days. Results: Seventy-two patients were randomized to SOC + IP (n = 39) and SOC + Placebo (n = 33) arms. There was significant reduction in VL in SOC + IP arm from day 0-4 (p = 0.002), compared to SOC + Placebo arm (p = 0.106). Change in the NRS score and WHO score was significant in both arms, however, the difference between the two arms was statistically significant in favour of IP arm. The increase in Th1 response was significant in SOC + IP arm (p = 0.023), but not in SOC + Placebo arm. COVID-19 specific antibodies were numerically higher in the SOC + IP arm. Conclusion: The study finds that polyherbal formulation significantly reduces VL and contributes to immunomodulation and improvement in clinical conditions without side effects.

Efficacy and safety of pegylated interferon-α2b in moderate COVID-19: a phase 3, randomized, comparator-controlled, open-label study.

OBJECTIVE: To evaluate the efficacy and safety of pegylated interferon alpha-2b (PEG IFN-α2b) administered in conjunction with the standard of care (SOC) in subjects with moderate coronavirus disease-19 (COVID-19). METHODS: In this study, adult subjects with confirmed moderate COVID-19 were randomized in a 1:1 ratio to receive either PEG IFN-α2b + SOC or SOC alone. The primary endpoint was a two-point improvement in clinical status on Day 11, measured by the World Health Organization's seven-point ordinal scale. RESULTS: Of 250 subjects, 120 were randomized to the PEG IFN-α2b + SOC arm and 130 were randomized to the SOC arm. The results for the PEG IFN + SOC arms vs the SOC arm for the proportion of subjects with a two-point improvement in the seven-point ordinal scale were 80.36% vs 68.18% (P=0.037) on Day 8, 91.60% vs 92.56% (P=0.781) on Day 11, and 94.12% vs 95.93% (P=0.515) on Day 15. There was a time-dependent decrease in the biomarkers in both arms, and no clinically significant changes in laboratory parameters. The safety profile was similar in both arms. CONCLUSION: PEG IFN-α2b induced early viral clearance, improved the clinical status, and decreased the duration of supplemental oxygen. It provides a viable treatment option and can limit the spread of severe acute respiratory syndrome coronavirus-2.

Safety and efficacy of herbal extracts to restore respiratory health and improve innate immunity in COVID-19 positive patients with mild to moderate severity: A structured summary of a study protocol for a randomised controlled trial.

OBJECTIVES: Primary Objective • To assess the efficacy of herbal extracts in boosting innate immunity of patients with COVID-19 infection. Secondary Objectives • To assess the efficacy of herbal extracts in restoring respiratory health • To assess the efficacy of Cap. IP in early recovery of patients and decline in viral load • To assess the safety of herbal extracts TRIAL DESIGN: This is a single centre, randomized, 2-arm, parallel group, double blind, 1:1 ratio, controlled, exploratory trial with a study period of 30 days from the day of enrolment. PARTICIPANTS: Patients attending the COVID treatment centre at Yashwantrao Chavan Memorial Hospital, Nehrunagar, Pimpri, Pune, India were screened for their participation in the study. Patients who were known COVID-19 positive (with positive RT-PCR), eligible and willing were enrolled in the study. INTERVENTION AND COMPARATOR: The intervention in the trial has a background in 'Ayurved'. Intervention Arm: Two capsules, Investigational Product (IP) - 1 - 400mg and Investigational Product - 2 - 450mg, containing herbal extracts (a blend of water and CO2 extracts) of Shunthi (Zingiber officinale (Ginger), Vidanga (Embelia ribes), Yashtimadhu (Glycyrrhiza glabra), Haritaki (Terminalia chebula), Guduchi (Tinospora cordifolia), Shatavari (Asparagus racemosus), Aamalaki (Emblica officinalis), Pippali (Piper longum) and calcined Zinc, Shankha bhasma. Placebo Arm: Edible starch ~ 450 mg. The look and feel of IP and of Placebo boxes were very similar. Patients are to take two capsules (one each of IP-1 and IP-2) twice a day for 15 days, and from the 16th day, one capsule of IP-2 twice a day up-to day 30. Capsules are to be administered orally with plain water. The IP is to be taken with all other concomitant medicines prescribed by the treating physician/doctor. The dose of each component in the IP is very safe to administer. The investigational products are registered products with the Indian Government and have been used for more than 6 months in various health conditions but not for COVID-19. MAIN OUTCOMES: Primary Outcome: Efficacy of the herbal extracts in COVID 19 positive patients (in declining viral load: time-point: 4 days and early recovery) Secondary Outcomes: Efficacy of the herbal extracts as an immune-modulator - TH1, TH2, Th17, IL6, NK Cells and CD markers; Immunoglobulin IGG (Serum); Immunoglobulin IGM (Serum) - at 30 days. Efficacy of the investigational product in reducing sequela of the disease Safety analysis (Liver Function Test and Kidney Function Test) including serious allergic reaction of: rash, itching/swelling, severe dizziness, trouble breathing. RANDOMISATION: An alphanumeric coded set of IP/Placebo containers will be used. Participants will be automatically randomized to two groups in the ratio 1:1. BLINDING (MASKING): Participants, caregivers and investigators were blinded. NUMBERS TO BE RANDOMISED (SAMPLE SIZE): A total of more than 60 and up to 75 patients were to be enrolled in the study into the two groups, considering drop-outs. 72 were enrolled with 37 into the intervention group and 35 into the placebo group. TRIAL STATUS: Protocol number: CoviQuest-01 Protocol version number: 1.2 Protocol Date: 1st July 2020 The recruitment period is completed for the trial. Date of 1st patient enrolment was 11th Aug 2020 and the last patient was enrolled on 3rd of September 2020. This is to state that it was a late submission from authors for publication of the protocol to the BMC, after enrolment in the study was over. Last Participant's last follow-up is scheduled on 5th October 2020 TRIAL REGISTRATION: The trial was prospectively registered with the CTRI (Clinical Trial Registry of India). Registration number is CTRI/2020/07/026570 . Registered on 14 July 2020 FULL PROTOCOL: The full protocol is attached as an additional file, accessible from the Trials website (Additional file 1). In the interest in expediting dissemination of this material, the familiar formatting has been eliminated; this Letter serves as a summary of the key elements of the full protocol.

Neopterin: A candidate biomarker for the early assessment of toxicity of aluminum among bauxite dust exposed mine workers.

INTRODUCTION: Bauxite ore is a major source of aluminum (Al) which contains approximately 35-60% Al by weight. Occupational and environmental bauxite dust exposure may cause toxicity by interaction with human biological systems resulting in oxidative stress (OS) and cell death. A neopterin derivative as an antioxidant is able to modulate cytotoxicity by the induction of OS. MATERIALS AND METHODS: A total of 273 subjects were selected for blood collection from three different major Al producing bauxite mines and were categorized into three groups as experimental (Exp) (n = 150), experimental controls (ExC) (n = 73) and control (Con) (n = 50). Whole blood and serum samples were used for measurement of Al, neopterin, urea and creatinine values. Statistical analysis was performed using R-2.15.1 programming language. RESULTS AND DISCUSSION: The result showed that age, body mass index and the behavioral habits, that is, smoking, tobacco and alcohol consumption have possible effects on neopterin level. Serum neopterin levels were found to be significantly higher (P <0.0001) in the experimental group as compared to other groups. Significantly positive correlation (P < 0.0001) was observed between neopterin and creatinine. It was also observed that neopterin level increases as the duration of exposure increases. CONCLUSION: On the basis of findings it was concluded that exposure to bauxite dust (even at low levels of Al) changes biochemical profile leading to high levels of serum neopterin. Levels of serum neopterin in workers exposed to bauxite dust were probably examined for the 1(st) time in India. The outcome of this study suggested that serum neopterin may be used as potential biomarker for early detection of health risks associated with bauxite dust exposed population.

Development of budesonide nanocluster dry powder aerosols: preformulation.

Wet milling was previously demonstrated as a simple process for producing agglomerates of budesonide nanoparticles (also known as NanoClusters) for use in dry powder aerosol formulation. The resulting budesonide NanoCluster powders exhibited a large emitted fraction and a high fine particle fraction (FPF) from a Monodose® dry powder inhaler. In this work, excipients were added premilling or postmilling and the performance of budesonide NanoCluster dry powders was investigated. Sodium chloride, Pluronic®, or ethanol was added prior to milling due to their ability to modify surface tension or ionic strength and thereby affect the attrition/agglomeration process. Lactose or l-leucine was added after milling because these are known to modify powder flow and dispersion. The chemical stability of budesonide was maintained in all cases, but the physical aerosol properties changed substantially with the addition of excipients. In all cases, the addition of excipients led to an increase in the size of the budesonide NanoClusters and tended to reduce the emitted fraction and FPF. Titrating excipients may provide a means to discretely modify the aerosol properties of budesonide NanoClusters but did not match the performance of excipient-free NanoCluster powder.

Development of budesonide nanocluster dry powder aerosols: formulation and stability.

The physical and chemical stability of dry powder aerosol formulations is an essential component in the development of an inhaled therapeutic. The pharmaceutical processing methods and storage conditions are primary determinants of the stability of a dry powder inhaler (DPI) formulation. Wet milling was used to produce budesonide NanoClusters (NCs), which are agglomerates of drug nanoparticles (≈ 300 nm) with a mean aerodynamic diameter between 1 and 3 µm, capable of deep lung penetration. In this study, the reproducibility of NC processing and performance was established. The physical stability of a selected budesonide NC formulation was investigated using industry standard dose content uniformity and cascade impaction techniques. The chemical stability of the lead formulation was also determined as a function of processing parameters and storage conditions. This study confirms the reproducibility and robust stability of NC powders as a novel means to turn drug particles into high-performance aerosols.

Development of budesonide nanocluster dry powder aerosols: processing.

Aerosolized medicine is one of the fastest growing areas in the pharmaceutical industry. Dry powder aerosols of pharmaceutical compounds are particularly attractive for the prevention and treatment of respiratory diseases but are also emerging as a treatment option for systemic diseases. Engineering particles in dry powder formulations can overcome many of the limitations of traditional inhaled pharmaceuticals. Here, a wet milling process for producing agglomerated budesonide nanoparticles (i.e., "NanoClusters") was explored. Parameters such as milling time and drug concentration were investigated, and the aerosol performance of dried budesonide NanoClusters was characterized. The wet milling process was able to produce aerosol particles composed entirely of budesonide. High emitted fraction and a large fine particle fraction suggested that the NanoCluster budesonide formulation would offer highly efficient delivery of drug throughout the lung.

The effect of film thickness on thermal aerosol generation.

PURPOSE: Rapid heating of thin films of pharmaceutical compounds can vaporize the molecules, which leads to formation of aerosol particles of optimal size for pulmonary drug delivery. The aim of this work was to assess the effect of coated film thickness on the purity of a thermally generated (condensation) drug aerosol. MATERIALS AND METHODS: Pharmaceuticals in their free base form were spray-coated onto stainless steel foils and subsequently heated and vaporized in airflow via a rapid resistive heating of the foil. Aerosol particles were collected on filters, extracted, and analyzed using reverse phase HPLC to assess the amount of degradation induced during the vaporization process. RESULTS: Condensation aerosols of five pharmaceuticals were formed from a wide range of film coating thicknesses. All five showed a roughly linear trend of increasing aerosol purity with decreasing film thickness, although with quite different slopes. These findings are consistent with a model based on general vaporization and degradation kinetics. Small non-uniformities in the film do not significantly alter aerosol purity. CONCLUSIONS: Rapid vaporization of pharmaceuticals coated as thin films on substrates is an efficient way of generating drug aerosols. By controlling the film thickness, the amount of aerosol decomposition can be minimized to produce high purity aerosols.

Ultra-fast absorption of amorphous pure drug aerosols via deep lung inhalation.

A deficiency of most current drug products for treatment of acute conditions is slow onset of action. A promising means of accelerating drug action is through rapid systemic drug administration via deep lung inhalation. The speed of pulmonary drug absorption depends on the site of aerosol deposition within the lung and the dissolution rate and drug content of the deposited particles. Alveolar delivery of fast-dissolving, pure drug particles should in theory enable very rapid absorption. We have previously shown that heating of thin drug films generates vapor-phase drug that subsequently cools and condenses into pure drug particles of optimal size for alveolar delivery. Here we present a hand held, disposable, breath-actuated device incorporating this thermal aerosol technology, and its application to the delivery of alprazolam, an anti-panic agent, and prochlorperazine, an anti-emetic with recently discovered anti-migraine properties. Thermal aerosol particles of these drugs exist in an amorphous state, which results in remarkably rapid drug absorption from the lung into the systemic circulation, with peak left ventricular concentrations achieved within 20 s, even quicker than following rapid (5 s) intravenous infusion. Absorption of the thermal aerosol is nearly complete, with >80% absolute bioavailability found in both dogs and human normal volunteers.