The impact of long-term storage conditions on the development of experimental dentinal microcracks.

This study evaluated the impact of long-term storage conditions (medium and time) on the development of experimental dentinal microcracks through micro-computed tomography. Sixty freshly extracted premolars were stored in formalin, water, or dry conditions (n = 20) and scanned after 72 h, 30 days, 6 months and 3 years of extraction. The effect of the storage medium and time on the occurrence of dentinal defects was statistically evaluated. A total of 211 000 images were screened revealing the existence of 11 519 slices with dentinal defects. Dry conditions significantly contributed to the development of new defects in all time points. During the 3-year follow-up period, no new defects were detected in the teeth that were stored in water and, in a single tooth, in the formalin group, after 6 months of storage.

Clinical Accuracy and Precision of 3 Multifrequency Electronic Apex Locators Assessed through Micro-Computed Tomographic Imaging.

INTRODUCTION: This study aimed to compare the in vivo accuracy and precision of 3 electronic apex locators (EALs) in determining the position of the major foramen using micro-computed tomographic (micro-CT) technology. METHODS: After access preparation of 23 necrotic or vital teeth from 5 patients, canals were negotiated, and hand files were used to determine the position of the foramen with 3 EALs: Propex Pixi (Dentsply Maillefer, Ballaigues, Switzerland), Woodpex III (Woodpecker Medical Instrument Co, Guilin, China), and Root ZX II (J Morita, Tokyo, Japan). After fixing the silicon stop to the file, teeth were extracted and scanned in a micro-CT device with and without the instrument inserted into the canal. Data sets were coregistered, and the accuracy and precision of the EALs were determined at a tolerance level of ±0.5 mm by measuring the distance from the tip of the instruments to a tangential line crossing the margins of the foramen. Statistical comparisons were performed using Friedman with post hoc related samples sign and Spearman tests (α = 5%). RESULTS: A significant difference was detected comparing the accuracy of Root ZX II (100%), Woodpex III (86.96%), and Propex Pixi (52.17%) (P < .05). There was a lack of significance in the relationship between the pulp status and the accuracy of the tested EALs (P > .05). Propex Pixi was significantly less precise than Root ZX II (P < .05), whereas no difference was found between Woodpex III and Root ZX II or Propex Pixi (P > .05). CONCLUSIONS: EALs presented similar precision, but Woodpex III and Root ZX II showed better accuracy to determine the position of the apical major foramen than Propex Pixi.

A critical analysis of research methods and experimental models to study root canal fillings.

Canal filling materials and techniques have been one of the most studied topics in Endodontics. A simple search using the mesh term "root canal filling" in PubMed revealed more than 11 000 articles, an impressive number that is much higher than "root canal disinfection" (5544 articles) or even the popular "root canal preparation" (8527 articles). The overriding importance attributed to root filling procedures is not merely intuitive. It derived from the appealing relevance given by the appearance of the white lines in common radiographs grounded on retrospective clinical data that had identified the quality of a root filling as one of the major causes of treatment failure (lack of healing). Since the publication of the Washington study, impressive efforts have been made for the release of new materials and techniques, as well as, for the development of a plethora of laboratory methods to assess the quality of root filling procedures. This narrative review aims to address and discuss the most relevant laboratory methods to assess the root canal filling. As filling quality improvements have not translated into higher success rates, as reported in longitudinal clinical studies, more than to deliver a simple methodology-based review, this paper aims to present an in-depth critical view on the assessment of laboratory methods used to study the filling materials and techniques. Recent data indicate that the long-term dimensional stability/degradation over time of endodontic sealers plays a central role in the treatment outcome. In this context, laboratory methods should be developed focusing on predicting, at least to some degree, the long-term clinical behaviour of root canal fillings, rather than simply ranking different materials or techniques.

Present status and future directions - Minimal endodontic access cavities.

In the last decades, the move of medicine towards minimally invasive treatments is notorious and scientifically grounded. As dentistry naturally follows in its footsteps, minimal access preparation have also becume a trend topic in the endodontic field. This procedure aims to maximize preservation of dentine tissue backed up by the idea that this is an effective way to reduce the incidence of post-treatment tooth fracture. However, with the assessment of the body of evidence on this topic, it is possible to observe some key points (a) the demand for nomenclature standardization, (b) the requirement of specific tools such as ultra-flexible instruments, visual magnification, superior illumination, and three-dimensional imaging technology, (c) minimally invasive treatment does not seem to affect orifice location and mechanical preparation when using adequate armamentarium, but it (d) may impair adequate canal cleaning, disinfection and filling procedures, and also (e) it displays contradictory results regarding the ability to increase the tooth strengthen compared to the traditional access cavity. In spite of that, it is undeniable that methodological flaws of some benchtop studies using extracted teeth may be responsible for the conflicting data, thus triggering the need for more sophisticated devices/facilities and specifically designed research in an attempt to make clear the role of the access size/design on long-term teeth survival. Moreover, it is inevitable that a clinical approach such as minimal endodontic access cavities that demands complex tools and skilled and experienced operators bring to the fore doubts on its educational impact mainly when confronted with the conflicting scientific output, ultimately provoking a cost-benefit analysis of its implementation as a routine technique. In addition, this review discusses the ongoing scientific and clinical status of minimally invasive access cavities aiming to input an in-depth and unbiased view over the rationale behind them, uncovering not only the related conceptual and scientific flaws but also outlining future directions for research and clinical practices. The conclusions attempt to skip from passionate disputes highlighting the current body of evidence as weak and incomplete to guide decision making, demanding the development of a close-to-in situ laboratory model or a large and well-controlled clinical trial to solve this matter.

A critical analysis of research methods and experimental models to study dentinal microcracks.

The purpose of this narrative review was to discuss the scientific milestones that led to the current understanding of the root dentinal microcrack phenomenon based on the interplay between the usage of micro-computed tomography (micro-CT) as an analytical tool alongside a close-to-mouth experimental model. In 2009, reports on the development of dentinal microcracks in extracted teeth after root canal preparation triggered an awareness of the potential for vertical root fractures (VRFs) of endodontically treated teeth could be developed from defects created by the mechanical stress of nickel-titanium preparation systems on dentine. This assumption was taken for granted, even though no cause-effect relationship had been scientifically demonstrated. Since then, several studies using the sectioning method with extracted teeth have been published and the large discrepancy amongst their outcomes soon become evident. Moreover, the high frequency of reported dentinal microcracks largely contrasted with the clinical incidence of VRFs, raising doubts on their methodological reliability. Using micro-CT technology, it was demonstrated by several studies that, in extracted teeth, dentinal defects already existed before the endodontic procedures, indicating that the initial reports framed a non-existing cause-effect relationship between canal preparation and dentinal microcracks. Although these new findings contributed to a better comprehension of this phenomenon, the misconception that microcracks were the starting point for VRFs was only surpassed with a new in situ approach using fresh cadavers. Surprisingly, microcracks were not identified in sound teeth. As a conclusion, dentinal microcracks in extracted teeth can be considered a non-natural occurrence observed only in a laboratory set-up as a consequence of dehydration and storage conditions. Thus, dentinal microcracks shall not be considered as the starting point for VRFs as they do not manifest in non-extracted teeth. Identifying dentinal microcracks as a laboratory phenomenon highlights the impact of recent scientific developments to disclaim the clinical relevance of laboratory-obtained outcomes.

Effect of number of uses and sterilization on the instrumented area and resistance of reciprocating instruments.

OBJECTIVES: This study evaluated the effect of repeated uses and autoclaving in the instrumented area, fracture resistance, and time of instrumentation of thermally treated nickel-titanium reciprocating systems. MATERIALS AND METHODS: Two hundred simulated canals were instrumented using Reciproc Blue and WaveOne Gold. Each file was used up to 10 times or until fracture. The instrumented area was measured in pre- and post-operative images, using ImageJ software. Kaplan-Meier survival analysis evaluated the number of uses of instruments before fracture. Instrumented area and time of instrumentation were analyzed by Mann-Whitney U test and Kruskal-Wallis. Correlations among the number of uses and instrumented area were measured. The level of statistical significance was set at p < 0.05. RESULTS: Reciproc Blue presented a higher estimated number of uses in comparison with WaveOne Gold (p = 0.026), but autoclaving did not affect the resistance to fracture of instruments (p > 0.05). The instrumented area was different among the evaluated groups (p = 0.039), and the instrumented area along the uses of both tested instruments was reduced. With the time of instrumentation, there was also a significant difference among the evaluated groups; the groups without sterilization cycles were faster, in comparison to those submitted to autoclaving (p = 0.010). CONCLUSIONS: Reciproc Blue was more resistant than WaveOne Gold, suffering later fracture. Additionally, the sterilization cycles did not influence the estimated number of uses of thermally treated reciprocating instruments, but the instrumented area of root canals was reduced along with the repeated uses of both instruments.

Is canal overinstrumentation able to produce apical root dentinal microcracks in extracted teeth?

AIM: To assess the impact of mechanical overinstrumentation of root canals in extracted teeth on the development of dentinal microcracks in the apical portion of the root by means of micro-computed tomographic (micro-CT) analysis. Root canal preparation short of the canal terminus and at the apical foramen (AF) were used as controls. METHODOLOGY: Twenty 2-rooted maxillary premolars with two canals were selected, scanned in a micro-CT device and the root canals prepared sequentially using Reciproc M-Wire R25 instruments to working lengths: 1 mm short of the AF (AF - 1 mm), at the AF (AF), and overinstrumentation (AF + 1 mm). A micro-CT scan of each specimen was performed after each time point. After reconstruction and co-registration procedures, the images were screened from the cementoenamel junction to the apex (n = 55 352) to identify the presence of dentinal microcracks in the apical third of the root. RESULTS: After the analyses of 55 352 slices, dentinal microcracks were visualized in 12.45% of the images (6892 slices), with 5.73% (3174 slices) in the cervical, 3.57% (1976 slices) in the middle and 3.15% (1740 slices) in the apical third. All dentinal microcracks observed at all time points (AF - 1 mm, AF and AF + 1 mm) were already present in the corresponding images before canal instrumentation. Therefore, no new microcracks were detected, regardless of the working length used for canal instrumentation. CONCLUSION: Reciprocating root canal preparation either short, at or beyond the AF (overinstrumentation) did not create dentinal microcracks in the roots of extracted 2-rooted maxillary premolars.

Root groove depth and inter-orifice canal distance as anatomical predictive factors for danger zone in the mesial root of mandibular first molars.

OBJECTIVES: This study evaluated the danger zone (DZ) in mesial roots of mandibular molars and the correlation between anatomical references of the DZ and some anatomical landmarks including tooth/root length, depth of mesial and distal grooves, and inter-canal orifices distance. MATERIAL AND METHODS: Twenty-eight mesial roots of mandibular molars with 2 independent canals were scanned and divided into 2 groups according to root length. The anatomical landmarks were correlated (Pearson or Spearman coefficients) with root level, thickness, and position of the DZ and also compared (independent samples t or Mann-Whitney tests) between the 2 groups at α = 5%. RESULTS: No statistical difference was observed between groups regarding DZ parameters and depth of mesial and distal grooves (P > 0.05). Orifice distance in group 2 (4.49 ± 0.75 mm) was significantly greater than group 1 (3.76 ± 0.89 mm) (P < 0.05). Significant correlations (P < 0.05) were found between (i) DZ level and root/tooth length (r = 0.54 and 0.49, respectively), (ii) DZ thickness and distal groove depth (r = - 0.45), and orifice distance (r = 0.38), and (iii) DZ position and depth of mesial (r = 0.39) and distal (r = 0.40) grooves. Other variables such as root length and distal groove depth (r = 0.28), and orifice distance and mesial groove depth (r = 0.36) were also correlated (P < 0.05). CONCLUSIONS: The length of tooth/root, the distance of canal orifices, and the depth of mesial/distal grooves of mesial roots of mandibular molars might be predictive factors for the root level, position, and thickness of the DZ. CLINICAL RELEVANCE: The length, distance of mesial canal orifices, and the depth of mesial and distal grooves of the mesial roots of mandibular molars might be moderate predictive factors for the root level, position, and thickness of the DZ.

Glide Path with Reciprocating Driven Pathfinding Instrument: Performance and Fracture Rate.

INTRODUCTION: This study assessed the number of mesial and distal canals of mandibular molars in which the R-Pilot pathfinding reciprocating instrument reached the working length (WL) during macro glide path procedure. Fracture and deformation rates were also evaluated. METHODS: One hundred fifty-six root canals of 52 teeth were scouted to the length of the apical foramen. Then the R-Pilot instrument was positioned at the canal orifice and activated. The instrument was moved by using a pecking motion and light apical pressure. This procedure was repeated in an attempt to reach the WL. The type of fracture and/or instrument deformation was assessed by scanning electron microscopy, whereas the roots with fractured instruments were scanned through micro-computed tomography. The percentage frequency distribution of fractures, deformations, and root canals in which the R-Pilot reached the WL were recorded and statistically compared by using the Pearson's χ2 test with α = 5%. RESULTS: R-Pilot instruments reached the WL in 139 root canals (89.10%), and χ2 test showed a significant difference between the observed frequencies and the expected frequencies (χ2 = 95.41, P = .000). The observed frequencies of fractures (2.56%) and deformations (1.92%) were also significantly lower than the expected (fracture: χ2 = 140.41, P = .000; deformation: χ2 = 144.23, P = .000). Fractures occurred mostly at the apical and curved parts of the root canals. CONCLUSIONS: R-Pilot reached the WL in 89.10% of the root canals of mandibular molars with fracture and deformation rates of 2.56% and 1.92%, respectively.

Micro-CT comparison of XP-endo Finisher and passive ultrasonic irrigation as final irrigation protocols on the removal of accumulated hard-tissue debris from oval shaped-canals.

OBJECTIVE: To compare the effectiveness of the XP-endo Finisher instrument and passive ultrasonic irrigation (PUI) as final irrigation protocols on the removal of accumulated hard-tissue debris (AHTD) from oval-shaped canals using micro-computed tomographic (micro-CT) analysis. METHODS: Twenty mandibular incisors were anatomically pair-matched based on similar morphological dimensions (length, volume, aspect ratio, and configuration) through micro-CT analysis, prepared with Reciproc R25 instrument, scanned again, and assigned to one of the two experimental groups (n = 10), according to the final irrigation protocol: XP-endo Finisher and PUI. After the final irrigation protocols, the specimens were rescanned and the registered datasets were examined to quantify the amount of AHTD. Data were statistically analyzed using Student's t test with a significance level of 5%. RESULTS: The final irrigation protocols were highly similar in terms of volumetric percentage reduction of AHTD (P = 1.000). CONCLUSIONS: XP-endo Finisher and PUI showed the same effectiveness on the removal of AHTD. None of the tested final irrigation protocols completely removed the AHTD from oval-shaped root canals. CLINICAL RELEVANCE: AHTD may be considered clinically relevant because it could harbor bacterial contents away from the disinfection procedures. Both final irrigation protocols were effective on the removal of AHTD.

Untouched canal areas and debris accumulation after root canal preparation with rotary and adaptive systems.

This study assessed the percentage of untouched canal areas and the amount of debris accumulation after canal preparation with ProTaper Next (PTN) and Twisted File Adaptive (TFA) systems using micro-computed tomographic (micro-CT) imaging. Twenty isthmus-containing mesial roots of mandibular molars were anatomically matched through micro-CT evaluation and randomly assigned to one of the two experimental groups (n = 10), according to the system used for canal preparation: PTN (X1 and X2 files using rotary motion) and TFA (SM1 and SM2 files using adaptive motion). After canal preparation up to ISO size 25, the specimens were then scanned and the matched images of the mesial canals, before and after preparation, were examined from the furcation level to the apex to quantify the untouched surface canal areas and to evaluate the amount of accumulated debris. An independent samples t-test and a Mann-Whitney test were used, respectively, to compare these variables between the groups with a significance level set at 5%. Root canals prepared with either PTN or TFA systems were found to present similar untouched canal surface areas (P = 0.52) and hard-tissue debris accumulation (P = 0.39). Both systems produced a suboptimal and similar mechanical preparation of the mesial canals of mandibular molars and were not able to yield root canals completely free from packed hard-tissue debris.

Comparison of two combinations of opioid and non-opioid analgesics for acute periradicular abscess: a randomized clinical trial.

INTRODUCTION: Acute periradicular abscess is a condition characterized by the formation and propagation of pus in the periapical tissues and generally associated with debilitating pain. OBJECTIVE: The aim of this study was to compare the overall analgesic effectiveness of two combinations of opioid and non-opioid analgesics for acute periradicular abscess. MATERIAL AND METHODS: This study included 26 patients who sought emergency care in a Brazilian dental school. The patients were randomly divided into two groups: Co/Ac - oral prescription of codeine (30 mg) plus acetaminophen (500 mg), every 4 h, for 3 days or Tr/Ac - oral prescription of tramadol hydrochloride (37.5 mg) plus acetaminophen (500 mg) on the same schedule. Two factors were evaluated: (1) pain scores recorded by the patients in a pain diary 6, 12, 24, 48, and 72 h after treatment, using the Visual Analogue Scale; and (2) the occurrence of adverse effects. RESULTS: In both groups, there was a reduction in pain scores over time. For the Co/Ac group, there was a significant reduction in the scores 12, 24, 48, and 72 hours after treatment (P<0.05). In the Tr/Ac group, the scores significantly decreased over time from time point 6 h (P<0.05). Comparing the pain at each time point, the groups were not significantly different (P>0.05), i.e., both treatments were effective in controlling pain caused by APA; however, the combination of Tr/Ac caused more adverse reactions as two patients had to stop using the medication. CONCLUSION: This study suggests that, considering both analgesic efficacy and safety, the combination of codeine and acetaminophen is more effective to control moderate to severe pain from acute periradicular abscesses.

Comparison of two combinations of opioid and non-opioid analgesics for acute periradicular abscess: a randomized clinical trial

Abstract Acute periradicular abscess is a condition characterized by the formation and propagation of pus in the periapical tissues and generally associated with debilitating pain. Objective: The aim of this study was to compare the overall analgesic effectiveness of two combinations of opioid and non-opioid analgesics for acute periradicular abscess. Material and Methods: This study included 26 patients who sought emergency care in a Brazilian dental school. The patients were randomly divided into two groups: Co/Ac - oral prescription of codeine (30 mg) plus acetaminophen (500 mg), every 4 h, for 3 days or Tr/Ac - oral prescription of tramadol hydrochloride (37.5 mg) plus acetaminophen (500 mg) on the same schedule. Two factors were evaluated: (1) pain scores recorded by the patients in a pain diary 6, 12, 24, 48, and 72 h after treatment, using the Visual Analogue Scale; and (2) the occurrence of adverse effects. Results: In both groups, there was a reduction in pain scores over time. For the Co/Ac group, there was a significant reduction in the scores 12, 24, 48, and 72 hours after treatment (P<0.05). In the Tr/Ac group, the scores significantly decreased over time from time point 6 h (P<0.05). Comparing the pain at each time point, the groups were not significantly different (P>0.05), i.e., both treatments were effective in controlling pain caused by APA; however, the combination of Tr/Ac caused more adverse reactions as two patients had to stop using the medication. Conclusion: This study suggests that, considering both analgesic efficacy and safety, the combination of codeine and acetaminophen is more effective to control moderate to severe pain from acute periradicular abscesses.

Micro-computed Tomography Assessment of Dentinal Micro-cracks after Root Canal Preparation with TRUShape and Self-adjusting File Systems.

INTRODUCTION: The aim of the present study was to evaluate the percentage frequency of dentinal micro-cracks observed after root canal preparation with TRUShape and Self-Adjusting File (SAF) systems by means of micro-computed tomography imaging analysis. A conventional full-sequence rotary system (BioRace) and a single-file reciprocation system (Reciproc) were used as reference techniques for comparison because of their known assertive cutting efficiency. METHODS: Forty anatomically matched mandibular incisors were selected, scanned at a resolution of 14.25 µm, and assigned to 4 experimental groups (n = 10), according to the preparation protocol: TRUShape, SAF, BioRace, and Reciproc systems. After the experimental procedures, the specimens were scanned again, and the registered preoperative and postoperative cross-section images of the roots (n = 70,030) were screened to identify the presence of dentinal micro-cracks. RESULTS: Overall, dentinal defects were observed in 28,790 cross-section images (41.11%). In the TRUShape, SAF, BioRace, and Reciproc groups, dentinal micro-cracks were visualized in 56.47% (n = 9842), 42.38% (n = 7450), 32.90% (n = 5826), and 32.77% (n = 5672) of the slices, respectively. All dentinal defects observed in the postoperative data sets were already present in the corresponding preoperative images. CONCLUSIONS: None of the preparation systems induced the formation of new dentinal micro-cracks.

Epoxy Resin-Based Root Canal Sealer Penetration into Dentin Tubules Does not Improve Root Filling Dislodgement Resistance.

OBJECTIVE: This study sought to evaluate the effect of the penetration of an epoxy resin-based root canal sealer into dentin tubules on the force required to dislodge the root canal filling. METHODS: Sixty extracted human central incisors with single canals were decoronated, instrumented, and filled with gutta-percha and AH Plus sealer labeled with 0.1% rhodamine B dye. The roots were further sectioned horizontally at 3, 6, and 8 mm from the apex. The coronal surfaces of the resulting 180 slices were evaluated using confocal laser scanning microscopy to measure the amount of sealer that penetrated into the dentin tubules. To quantify the force required to dislocate the root filling material, the root fillings of the slices were subjected to a dislodgement resistance test (push-out). Spearman's rho correlation test was further used to test the correlation between the push-out bond strength and sealer penetration into the dentin tubules (P<0.05). RESULTS: No significant correlation was observed between sealer penetration into the dentin tubules and the force required to dislodge the root canal filling (P=0.626). CONCLUSION: Following the results of this study, the penetrating ability of the AH Plus sealer into dentin tubules has no correlation with the force required to dislodge the root canal filling.

On the Causality Between Dentinal Defects and Root Canal Preparation: A Micro-CT Assessment.

This study aimed to evaluate the cause-effect relationship between canal preparation with ProTaper Universal (PTU) system and dentinal defects formation using micro-computed tomography (micro-CT) analysis. Forty mesial canals of mandibular molars with a type II Vertucci's canal configuration were scanned at an isotropic resolution of 14.16 µm. The sample was assigned to an experimental (n = 30) and a control (n = 10) groups, and the mesial canals were prepared with PTU system up to F2 instrument. The specimens from the experimental group were scanned and the cross-section images of the mesial roots, before and after preparation, were screened to identify the presence of dentinal defects. In the control group, the specimens were sectioned perpendicularly to the long axis of the root into 1-mm-thick slices (n = 80) and examined under optical microscope. Once a dentinal defect was detected, the slice was scanned through micro-CT. In the experimental group, dentinal micro-cracks were observed in 4,828 slices (24.04%). In all cross-section images, dentinal defects identified in the postoperative images were already present in the corresponding preoperative image. In the control group, 13 out of 80 slices (16.25%) had at least one dentinal defect visualized under stereomicroscopy, which was identified after a further micro-CT scanning. Micro-CT showed reliability as similar as optical microscopy in detecting dentinal defects, adding the possibility of tracking the dentinal tissue, before and after canal preparation, and providing a clear visualization of micro-cracks. Root canal preparation with PTU system did not induce the formation of new dentinal defects.

On the Causality Between Dentinal Defects and Root Canal Preparation: A Micro-CT Assessment

Abstract This study aimed to evaluate the cause-effect relationship between canal preparation with ProTaper Universal (PTU) system and dentinal defects formation using micro-computed tomography (micro-CT) analysis. Forty mesial canals of mandibular molars with a type II Vertucci's canal configuration were scanned at an isotropic resolution of 14.16 µm. The sample was assigned to an experimental (n = 30) and a control (n = 10) groups, and the mesial canals were prepared with PTU system up to F2 instrument. The specimens from the experimental group were scanned and the cross-section images of the mesial roots, before and after preparation, were screened to identify the presence of dentinal defects. In the control group, the specimens were sectioned perpendicularly to the long axis of the root into 1-mm-thick slices (n = 80) and examined under optical microscope. Once a dentinal defect was detected, the slice was scanned through micro-CT. In the experimental group, dentinal micro-cracks were observed in 4,828 slices (24.04%). In all cross-section images, dentinal defects identified in the postoperative images were already present in the corresponding preoperative image. In the control group, 13 out of 80 slices (16.25%) had at least one dentinal defect visualized under stereomicroscopy, which was identified after a further micro-CT scanning. Micro-CT showed reliability as similar as optical microscopy in detecting dentinal defects, adding the possibility of tracking the dentinal tissue, before and after canal preparation, and providing a clear visualization of micro-cracks. Root canal preparation with PTU system did not induce the formation of new dentinal defects.

Resumo O objetivo deste estudo foi avaliar a relação de causa-efeito entre o preparo do canal radicular com o sistema ProTaper Universal (PTU) e a formação de defeitos dentinários usando a análise por micro-tomografia computadorizada (micro-CT). Quarenta raízes mesiais de molares inferiores com a configuração tipo II de Vertucci foram escaneadas com resolução isotrópica de 14.16 μm. A amostra foi distribuída em um grupo experimental (n = 30) e um grupo controle (n = 10), e os canais mesiais foram preparados com o sistema PTU até a lima F2. As amostras do grupo experimental foram escaneadas e as imagens de secção transversal das raízes mesiais, antes e após o preparo, foram analisadas ​​para identificar a presença de defeitos dentinários. No grupo controle, os dentes foram seccionados perpendicularmente em relação ao longo eixo da raiz em fatias de 1 mm de espessura (n = 80) e examinados ao microscópio óptico. Uma vez detectado um defeito dentinário, a fatia foi escaneada através da micro-CT. No grupo experimental, defeitos dentinários foram observados em 4.828 secções transversais (24,04%). Em todas as imagens de secção transversal, os defeitos dentinários após os procedimentos experimentais já estavam presentes na secção pré-operatória correspondente. No grupo controle, 13 das 80 fatias (16,25%) apresentaram pelo menos um defeito dentinário visualizado através do microscópio, o qual foi identificado em um escaneamento posterior. A micro-CT mostrou confiabilidade com a microscopia óptica para detecção e visualização dos defeitos dentinários, permitindo acompanhar o tecido dentinário antes e depois do preparo do canal. O preparo do canal radicular com o sistema PTU não induziu a formação de novos defeitos dentinários.

Quantitative transportation assessment in simulated curved canals after large apical preparations

Aim: To evaluate the ability of rotary (ProTaper Universal [PTU] and ProTaper Next [PTN]), reciprocating (Reciproc [R] and WaveOne [WO]) and adaptive (Twisted File Adaptive [TFA]) systems in maintaining the original canal profile in straight and curved parts after apical preparations up to size 40. Methods: Resin blocks with simulated curved canals were randomly assigned to five groups: PTU, PTN, R, WO and TFA. Images were captured from each block before and after canal preparation (n=10). Assessment of canal transportation was obtained for the straight and curved parts of the canal. ANOVA followed by Tukey's test was used (α = 5%). Results: Transportation values were increased at the curved part (P = .00). For both canal levels, TFA system induced the lowest mean of canal transportation followed by PTN, R, WO and PTU systems. At the straight portion, transportation for R and TFA systems were similar (P > .05), and these values were significantly lower than for WO, PTN and PTU (P = .00). At the curved portion, TFA resulted in less canal transportation, followed by PTN, R, WO and PTU systems (P = .00). Conclusions: TFA system produced less canal transportation than other systems tested during large apical preparations. (AU)

Quantitative transportation assessment in curved canals prepared with an off-centered rectangular design system.

The purpose of this study was to assess the ability of an off-centered rectangular design system [ProTaper Next (PTN)] to maintain the original profile of the root canal anatomy. To this end, ProTaper Universal (PTU), Reciproc (R) and WaveOne (WO) systems were used as reference techniques for comparison. Forty clear resin blocks with simulated curved root canals were randomly assigned to 4 groups (n = 10) according to the instrumentation system used: PTN, PTU, R and WO. Color stereomicroscopic images of each block were taken before and after instrumentation. All image processing and data analysis were performed with an open source program (Fiji v.1.47n). Evaluation of canal transportation was obtained for two independent regions: straight and curved portions. Univariate analysis of variance and Tukey's Honestly Significant Difference test were performed, and a cut-off for significance was set at α = 5%. Instrumentation systems significantly influenced canal transportation (p = 0.000). Overall, R induced significantly lower canal transportation compared with WO, PTN and PTU (p = 0.000). The curved portion displayed superior canal transportation compared to the straight one (p = 0.000). The significance of the difference among instrumentation systems varied according to the canal level evaluated (p = 0.000). In its straight portion, R and WO exhibited significantly lower transportation than PTN; whereas in the curved portion, R produced the lowest deviation. PTU exhibited the highest canal transportation at both levels. It can be concluded that PTN produced less canal transportation than PTU and WO; however, R exhibited better centering ability than PTN.

Comparison of canal transportation in simulated curved canals prepared with ProTaper Universal and ProTaper Gold systems.

OBJECTIVES: The purpose of this study was to assess the ability of ProTaper Gold (PTG, Dentsply Maillefer) in maintaining the original profile of root canal anatomy. For that, ProTaper Universal (PTU, Dentsply Maillefer) was used as reference techniques for comparison. MATERIALS AND METHODS: Twenty simulated curved canals manufactured in clear resin blocks were randomly assigned to 2 groups (n = 10) according to the system used for canal instrumentation: PTU and PTG groups, upto F2 files (25/0.08). Color stereomicroscopic images from each block were taken exactly at the same position before and after instrumentation. All image processing and data analysis were performed with an open source program (FIJI). Evaluation of canal transportation was obtained for two independent canal regions: straight and curved levels. Student's t test was used with a cut-off for significance set at α = 5%. RESULTS: Instrumentation systems significantly influenced canal transportation (p < 0.0001). A significant interaction between instrumentation system and root canal level (p < 0.0001) was found. PTU and PTG systems produced similar canal transportation at the straight part, while PTG system resulted in lower canal transportation than PTU system at the curved part. Canal transportation was higher at the curved canal portion (p < 0.0001). CONCLUSIONS: PTG system produced overall less canal transportation in the curved portion when compared to PTU system.