RESUMEN
The delicate synthesis of one-dimensional (1D) carbon nanostructures from two-dimensional (2D) graphene moiré layers holds tremendous interest in materials science owing to its unique physiochemical properties exhibited during the formation of hybrid configurations with sp-sp2 hybridization. However, the controlled synthesis of such hybrid sp-sp2 configurations remains highly challenging. Therefore, we employed a simple hydrothermal technique using agro-industrial waste as the carbon source to synthesize 1D carbyne nanocrystals from the nanoconstricted zones of 2D graphene moiré layers. By employing suite of characterization techniques, we delineated the mechanism of carbyne nanocrystal formation, wherein the origin of carbyne nanochains was deciphered from graphene intermediates due to the presence of a hydrothermally cut nanoconstriction regime engendered over well-oriented graphene moiré patterns. The autogenous hydrothermal pressurization of agro-industrial waste under controlled conditions led to the generation of epoxy-rich graphene intermediates, which concomitantly gave rise to carbyne nanocrystal formation in oriented moiré layers with nanogaps. The unique growth of carbyne nanocrystals over a few layers of holey graphene exhibits excellent paramagnetic properties, the predominant localization of electrons and interfacial polarization effects. Further, we extended the application of the as-synthesized carbyne product (Cp) for real-time electrochemical-based toxic metal (As3+) sensing in groundwater samples (from riverbanks), which depicted superior sensitivity (0.22 mA µM-1) even at extremely lower concentrations (0.0001 µM), corroborating the impedance spectroscopy analysis.
RESUMEN
Desired modifications of surfaces at the nanoscale may be achieved using energetic ion beams. In the present work, a complete study of self-assembled ripple pattern fabrication on Si and Ge by 100 keV Ar+ ion beam bombardment is discussed. The irradiation was performed in the ion fluence range of ≈3 × 1017 to 9 × 1017 ions/cm2 and at an incident angle of θ ≈ 60° with respect to the surface normal. The investigation focuses on topographical studies of pattern formation using atomic force microscopy, and induced damage profiles inside Si and Ge by Rutherford backscattering spectrometry and transmission electron microscopy. The ripple wavelength was found to scale with ion fluence, and energetic ions created more defects inside Si as compared to that of Ge. Although earlier reports suggested that Ge is resistant to structural changes upon Ar+ ion irradiation, in the present case, a ripple pattern is observed on both Si and Ge. The irradiated Si and Ge targets clearly show visible damage peaks between channel numbers (1000-1100) for Si and (1500-1600) for Ge. The clustering of defects leads to a subsequent increase of the damage peak in irradiated samples (for an ion fluence of ≈9 × 1017 ions/cm2) compared to that in unirradiated samples.
RESUMEN
As an energetic ion traverses a target material, it loses its energy through the processes of electronic energy loss (S e) and nuclear energy loss (S n). Controlled swift heavy ion (SHI) irradiation on solid targets produces its effects through both of these mechanisms, as a consequence of which modifications occur in the structure, surface morphology, and magnetic and optical properties, apart from ion implantation and ion-induced reactivity. A systematic investigation of these effects can be useful in developing standard protocols for creating desired effects in materials using specific ion beams. In this study, indium films of thickness 25 nm were deposited on silicon substrates and were subjected to 100 MeV O7+ and 100 MeV Si7+ ion irradiation, with the fluences varying from 1 × 1011 to 1 × 1013 ions/cm2. The pristine and SHI-irradiated films were then characterized using glancing incidence X-ray diffraction (GIXRD), Rutherford backscattering spectrometry (RBS), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The motive was to identify the effects of irradiation with different ion species having large variations in electronic and nuclear energy losses. While the RBS results suggest that sputtering is extremely low and that there are no major changes in the film composition due to ion beam-induced mixing, the GIXRD analysis indicates that increasing the ion fluence reduces the crystallinity of the film for both the ions. Ion beam irradiation with O7+ ions, however, results in beam-induced reactivity, as the GIXRD scan shows characteristic peaks from indium oxide (In2O3), which become the predominant peaks at the highest fluence used here. Si7+ ion irradiation results in a narrowing of the particle size distribution on the surface, with no evidence of reactivity. SEM results indicate fusion and fragmentation of grains with the increase in the ion fluences, and AFM images reveal an increase in the surface roughness of a few percent when irradiated with both 100 MeV O7+ and 100 MeV Si7+ ions.
RESUMEN
We report the complex implications of inter-diffusion between polycrystalline FePt/FeCo layers as an impact of the FeCo underlayer on the structural and magnetic properties of the system. The crystalline growth of FePt strongly reduces in an entirely diffused system compared to the one with lesser diffusion, while the crystalline structure of FeCo is apparently less affected. Charge redistribution occurs between Fe, Co and Pt ensuring increased Co-Pt and Fe-Pt interactions with higher diffusion. Thereafter, we combine hysteresis and magnetic force microscopy measurements to show that the interfacial deformations result in the distinct out-plane magnetic behaviour of the system. FeCo@FePt nano-composite like structure, originating due to interfacial diffusion, shows interactions between two magnetic phases with in-plane low anisotropy exhibiting wasp-shaped out-plane hysteresis loop. Whereas the layered structure of FePt/FeCo films shows random anisotropy with a significant out-plane contribution even in the polycrystalline films. Micromagnetic modelling demonstrates coercivity deterioration and reduction of switching field due to the formation of a slightly diffused interface. Contrarily, the experimental observations for complete diffusion between the two layers are explained by simulating the inhomogeneous distribution of anisotropies along the film plane. These studies provide deep perceptions of the magnetic properties of FePt/FeCo system governed by diffusion kinetics which are valuable to achieve desired magnetic characteristics using this system.
RESUMEN
The persistent use of pesticides in the agriculture field remains a serious issue related to public health. In the present work, molecularly imprinted polymer thin films were developed using electropolymerization of pyrrole (py) onto gold microelectrodes followed by electrodeposition for the selective detection of chlorpyrifos (CPF). The molecularly imprinted polymer (MIP) was synthesized by the electrochemical deposition method, which allowed in-line transfer of MIP on gold microelectrodes without using any additional adhering agents. Various parameters such as pH, monomer ratio, scan rate, and deposition cycle were optimized for sensor fabrication. The sensor was characterized at every stage of fabrication using various spectroscopic, microscopic, and electrochemical techniques. The sensor requires only 2 µL of the analyte and its linear detection range was found to be 1 µM to 1 fM. The developed sensor's limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.93 and 2.82 fM, respectively, with a sensitivity of 3.98 (µA/(µM)/ mm2. The sensor's shelf life was tested for 70 days. The applicability of the sensor in detecting CPF in fruit and vegetable samples was also assessed out with recovery % between 91 and 97% (RSD < 5%). The developed sensor possesses a huge commercial potential for on-field monitoring of pesticides.
RESUMEN
We report the formation of self-organized nano-dots on the surface of InP(100) upon irradiating it with a 500 keV Ar(4+) ion beam. The irradiation was carried out at an angle of 25° with respect to the normal at the surface with 5 different fluences ranging from 1.0 × 10(15) to 1.0 × 10(17) ions per cm(2). The morphology of the ion-irradiated surfaces was examined by atomic force microscopy (AFM) and the formation of the nano-dots on the irradiated surfaces was confirmed. The average size of the nano-dots varied from 44 ± 14 nm to 94 ± 26 nm with increasing ion fluence. As a function of the ion fluence, the variation in the average size of the nano-dots has a great correlation with the surface roughness, which changes drastically up to the ion fluence of 1.0 × 10(16) ions per cm(2) and attains almost a saturation level for further irradiation. The roughness and the growth exponent values deduced from the scaling laws suggest that the kinetic sputtering and the large surface diffusion steps of the atoms are the primary reasons for the formation of the self-organized nanodots on the surface. X-ray photo-electron spectroscopy (XPS) studies show that the surface stoichiometry changes with the ion fluence. With irradiation, the surface becomes more indium (In)-rich owing to the preferential sputtering of the phosphorus atoms (P) and the pure metallic In nano-dots evolve at the highest ion fluence. The cross-sectional scanning electron microscopy (SEM) analysis of the sample irradiated with the highest fluence showed the absence of the nanostructuring beneath the surface. The surface morphological changes at this medium energy ion irradiation are discussed in correlation with the low and high energy experiments to shed more light on the mechanism of the well separated nano-dot formation.
RESUMEN
We have investigated the formation of nanoripples on the surface of germanium, Ge(100), due to the effect of 100-keV Ar (+) ion irradiation. The irradiation was carried out at different incidence angles from 0° to 75° in steps of 15° with respect to the surface normal with a fixed ion fluence of approximately 3 × 10(17) ions/cm(2). Atomic force micrographs show an increase in surface roughness from 0.5 to 4.3 nm for the pristine sample and the sample irradiated at 60° incidence angle due to cos(-1)(θ) dependence on sputtering yield. With increase in angle of incidence, there is transition observed from nanodots to aligned nanodots perpendicular to the direction of the beam. There is an increase in size of the nanostructures observed from 44 to 103 nm with angle of incidence. The formation of nanoripples initiates at an angle of θ ~ 45°. Ripple pattern formation has taken place on the Ge surface in the energy regime of 100 keV as compared to the other reports which had been carried out using very low energy ions. Raman spectra reveal that the near surface of crystalline Ge samples becomes amorphous due to interaction of Ar(+) ions due to creation of defects through collision cascades.
RESUMEN
We report the synthesis of Pt nanoparticles and their burrowing into silicon upon irradiation of a Pt-Si thin film with medium-energy neon ions at constant fluence (1.0 × 10(17) ions/cm(2)). Several values of medium-energy neon ions were chosen in order to vary the ratio of the electronic energy loss to the nuclear energy loss (S e/S n) from 1 to 10. The irradiated films were characterized using Rutherford backscattering spectroscopy (RBS), atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). A TEM image of a cross section of the film irradiated with S e/S n = 1 shows ≈5 nm Pt NPs were buried up to ≈240 nm into the silicon. No silicide phase was detected in the XRD pattern of the film irradiated at the highest value of S e/S n. The synergistic effect of the energy losses of the ion beam (molten zones are produced by S e, and sputtering and local defects are produced by S n) leading to the synthesis and burrowing of Pt NPs is evidenced. The Pt NP synthesis mechanism and their burrowing into the silicon is discussed in detail.