The improvement of periodontal tissue regeneration using a 3D-printed carbon nanotube/chitosan/sodium alginate composite scaffold.

Periodontal disease is a common disease in the oral field, and many researchers are studying periodontal disease and try to find some biological scaffold materials to make periodontal tissue regenerative. In this study, we attempted to construct a carbon nanotube/chitosan/sodium alginate (CNT/CS/AL) ternary composite hydrogel and then prepare porous scaffold by 3D printing technology. Subsequently, characterizing the materials and testing the mechanical properties of the scaffold. Additionally, its effect on the proliferation of human periodontal ligament cells (hPDLCs) and its antibacterial effect on Porphyromonas gingivalis were detected. We found that CNT/CS/AL porous composite scaffolds with uniform pores could be successfully prepared. Moreover, with increasing CNT concentration, the degradation rate and the swelling degree of scaffold showed a downward trend. The compressive strength test indicated the elastic modulus of composite scaffolds ranged from 18 to 80 kPa, and 1% CNT/CS/AL group had the highest quantitative value. Subsequently, cell experiments showed that the CNT/CS/AL scaffold had good biocompatibility and could promote the proliferation of hPDLCs. Among 0.1%-1% CNT/CS/AL groups, the biocompatibility of 0.5% CNT/CS/AL scaffold performed best. Meanwhile, in vitro antibacterial experiments showed that the CNT/CS/AL scaffold had a certain bacteriostatic effect on P. gingivalis. When the concentration of CNT was more than 0.5%, the antimicrobial activity of composite scaffold was significantly promoted, and about 30% bacteria were inactivated. In conclusion, this 3D-printed CNT/CS/AL composite scaffold, with good material properties, biocompatibility and bacteriostatic activity, may be used for periodontal tissue regeneration, providing a new avenue for the treatment of periodontal disease.

The enhancement of osseointegration using a graphene oxide/chitosan/hydroxyapatite composite coating on titanium fabricated by electrophoretic deposition.

Titanium (Ti) has been commonly used as an implant material in dentistry and bone surgery for several decades. Meanwhile, surface modification of titanium can enhance the osseointegration of implants. In this study, a graphene oxide/chitosan/hydroxyapatite (GO/CS/HA) composite coating was fabricated by electrophoretic deposition on Ti substrates. Subsequently, the surface morphology, phase composition, wettability, and bonding strength of this composite coating were researched. Additionally, in vitro cytological examination was performed, including evaluations of cell adhesion, cell viability, cell differentiation, cell mineralization, and osteogenetic factor expression. Finally, the in vivo osteogenetic properties were evaluated through an animal study, including a histological analysis, a microcomputed tomography, and biomechanical tests. The results showed that a homogeneous and crack-free GO/CS/HA composite coating was coated on Ti, and the wettability and bonding strength of the GO/CS/HA composite coating were enhanced compared with HA, GO/HA, and CS/HA coatings. Furthermore, the GO/CS/HA coating greatly heightened the cell-material interactions in vitro. Additionally, this GO/CS/HA-Ti implant could enhance osseointegration in vivo. Consequently, GO/CS/HA-Ti may have potential applications in the field of dental implants. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 635-645, 2019.

Static and dynamic evaluations of the wettability of commercial vinyl polysiloxane impression materials for artificial saliva.

This study evaluated the wettability of commercial vinyl polysiloxane impression materials by measuring contact angles on horizontal and non-horizontal surfaces using artificial saliva. Three light bodies (Affinis [Affi], Silagum [Sila] and Variotime [Vario-LB]) and one extra light body (Viriotime [Vario-ELB]) were prepared with flat surfaces. Static and dynamic contact angles were measured using the sessile drop method as a function of time. Contact angle hysteresis was the value of advancing contact angle minus receding contact angle. The results indicated that all materials were classified as hydrophilic materials. Vario-ELB and Affi showed better initial wettability than the other two materials. Vario-ELB showed more hydrophilic properties and was more vulnerable to changes in the intraoral environment compared to Affi, Sila and Vario-LB. These results suggest that measuring the time-dependent dynamic contact angle on the inclined surface can provide effective information regarding the wettability of impression materials to evaluate their clinical performance.

Effect of dentin surface modification using carbon nanotubes on dental bonding and antibacterial ability.

This study developed carbon nanotube coatings for the dentin surface and investigated the bonding strength and the in vitro antibacterial properties of carbon nanotube-coated dentin. Single-walled carbon nanotubes and multi-walled carbon nanotubes were first modified and then characterized using Fourier-transform infrared spectroscopy, scanning electron microscope, and transmission electron microscopy. Second, dentin samples were coated using either single-walled carbon nanotubes or multi-walled carbon nanotubes and observed under a scanning electron microscope. Then, the shear bonding strength and antibacterial properties of the dentin samples were tested. The results showed that both modified single-walled carbon nanotubes and multi-walled carbon nanotubes formed a stable coating on the dentin surface without affecting the shear bonding strength. Moreover, the antibacterial properties of the single-walled carbon nanotube-coated samples was obviously superior to those of the multi-walled carbon nanotube-coated samples. Consequently, single-walled carbon nanotube coating may be an antibacterial agent for potential application in the dental bonding field.

A Systematic Review of the Survival and Complication Rates of All-Ceramic Resin-Bonded Fixed Dental Prostheses.

PURPOSE: The aim of this systematic review was to investigate the survival and complication rates of all-ceramic resin-bonded fixed dental prostheses (RBFDPs). MATERIALS AND METHODS: The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were applied. A systematic search was conducted by an electronic search in PubMed, EMBASE, Cochrane Library, and CNKI databases complemented by a manual search. Only clinical studies on all-ceramic RBFDPs with a mean follow-up period of at least 3 years qualified for data analyses. RESULTS: Among 1503 screened articles, one randomized controlled trial (RCT) and seven prospective or retrospective cohort studies were included in this study. The estimated 5-year survival rate of all-ceramic RBFDPs was 91.2%. Debonding and framework fracture were the two most frequent technical complications, and the estimated 5-year debonding rate and fracture rate were 12.2% and 4.8%, respectively. Additionally, cantilevered all-ceramic RBFDPs had a higher survival rate (p < 0.01), lower debonding rate, (p < 0.05), and fracture rate (p < 0.01) compared with two-retainer all-ceramic RBFDPs. Zirconia ceramic RBFDPs had a lower incidence of failure but a higher debonding rate compared with glass-ceramic RBFDPs (p < 0.01). CONCLUSION: Within the limitations of this systematic review, although all-ceramic RBFDPs have a favorable 5-year survival rate, this rate cannot represent the complete success of the treatment, since it may include typical complications such as debonding and fractures. There is an urgent need for long-term clinical studies, especially for well-designed RCTs on all-ceramic RBFDPs.

A systematic review of the survival and complication rates of inlay-retained fixed dental prostheses.

OBJECTIVES: The aim of this systematic review was to investigate the survival and complication rates of inlay-retainer fixed dental prostheses (IRFDPs). DATA/SOURCES: A systematic search was conducted in the PubMed, EMBASE, and Cochrane Library databases in English and time filters (articles published from 1960) were used. STUDY SELECTION: Randomized controlled trails (RCTs), controlled clinical trials (CCTs) and prospective cohort studies on IRFDPs with a mean follow-up period of at least 2 years were included. Among 501 screened articles, one RCT and ten prospective cohort studies were included in this study. Of the included studies, information on failure and complications was independently extracted by two reviewers in duplicate. The failure and complication rates of IRFDPs were pooled with a random effect model and Poisson regression was applied to further investigate the influence of framework materials. The estimated 3- and 5-year survival rates of IRFDPs were 92.6% (95% CI: 85.8-97.6%) and 87.9% (95% CI: 77.4-96.1%), respectively. Debonding, fracture, dentine hypersensitivity and secondary caries were primary complications. The estimated 5-year rates of debonding, veneer fracture and secondary caries were 5.3%, 15.2% and 2.7%, respectively. Additionally, fiber-reinforced composite IRFDPs exhibited a lower incidence of debonding and caries with a higher rate of veneer fracture compared with metal-based and all-ceramic IRFDPs (p<0.05). CONCLUSIONS: Compared with conventional fixed dental prostheses (FDPs) and implant-supported single crowns (ISCs), IRFDPs exhibited an acceptable 3-year survival rate but higher complication rates of debonding and veneer fracture. CLINICAL SIGNIFICANCE: IRFDPs can be recommended as viable short- or middle-term minimally invasive alternatives to short-span conventional FDPs and ISCs, while the clinical outcome of IRFDPs as long-term definitive restorations still calls for further research. The indications of IRFDPs should be strictly controlled and monitored.