Plate selection for fixation of extra-articular distal humerus fractures: a biomechanical comparison of three different implants.

Operative fixation of extra-articular distal humerus using a single posterolateral column plate has been described but the biomechanical properties or limits of this technique is undefined. The purpose of this study was to evaluate the mechanical properties of distal humerus fracture fixation using three standard fixation constructs. Two equal groups were created from forty sawbones humeri. Osteotomies were created at 80mm or 50mm from the tip of the trochlea. In the proximal osteotomy group, sawbones were fixed with an 8-hole 3.5mm LCP or with a 6-hole posterolateral plate. In the distal group, sawbones were fixed with 9-hole medial and lateral 3.5mm distal humerus plates and ten sawbones were fixed with a 6-hole posterolateral plate. Biomechanical testing was performed using a servohydraulic testing machine. Testing in extension as well as internal and external rotation was performed. Destructive testing was also performed with failure being defined as hardware pullout, sawbone failure or cortical contact at the osteotomy. In the proximal osteotomy group, the average bending stiffness and torsional stiffness was significantly greater with the posterolateral plate than with the 3.5mm LCP. In the distal osteotomy group, the average bending stiffness and torsional stiffness was significantly greater with the posterolateral plate than the 3.5mm LCP. In extension testing, the yield strength was significantly greater with the posterolateral plate in the proximal osteotomy specimens, and the dual plating construct in the distal osteotomy specimens. The yield strength of specimens in axial torsion was significantly greater with the posterolateral plate in the proximal osteotomy specimens, and the dual plating construct in the distal osteotomy specimens. Limited biomechanical data to support the use of a pre-contoured posterolateral distal humerus LCP for fixation of extra-articular distal humerus exists. We have found that this implant provided significantly greater bending stiffness, torsional stiffness, and yield strength than a single 3.5mm LCP plate for osteotomies created 80mm from the trochlea. At the more distal osteotomy, dual plating was biomechanically superior. Our results suggest that single posterolateral column fixation of extra-articular humerus fractures is appropriate for more proximal fractures but that dual plate fixation is superior for more distal fractures.

Biomechanical comparison of flexible stainless steel and titanium nails with external fixation using a femur fracture model.

There are several options available for surgical stabilization of pediatric femoral shaft fractures. The purpose of this study was to compare the stability afforded by Ender stainless steel nails, titanium elastic nails, and one-plane unilateral external fixators for the fixation using a synthetic adolescent midshaft femur fracture model. The anterior-posterior (sagittal plane) bending, lateral (coronal plane) bending, torsional, and axial stiffness values were calculated using 6 different fixation configurations. These included pairs of 3.5-mm-diameter Ender nails with and without distal locking, 3.5- and 4.0-mm-diameter titanium elastic nails as well as single- and double-stacked monolateral external fixators. Eight synthetic femur models, 4 each with simulated transverse and comminuted fracture patterns, were sequentially tested for stability afforded by the various fracture fixation configurations. External fixation exhibited significantly greater control of anterior-posterior angulation compared with all flexible-nailing systems. Although Ender nails were slightly superior to titanium nails in control of sagittal plane angulation, this was not statistically significant. Compared with the external fixation constructs, all 4 flexible nail constructs demonstrated higher torsional stability. For prevention of axial shortening, all fixation methods were similar for the transverse fracture pattern, whereas external fixation was superior to flexible nails in the comminuted fracture model. No significant benefit was demonstrated with double stacking of external fixators. These findings may help guide clinicians choose the optimal fixation method for treatment of pediatric femoral shaft fractures.

Salicylic acid-derived poly(anhydride-esters) inhibit bone resorption and formation in vivo.

The objective of this study was to investigate the effects of a novel polymer that biodegrades into salicylic acid (SA) on the healing of critical sized long bone defects. Microspheres of the homopolymer, or a copolymer containing 50% less of the SA, were packed into 5-mm mid-diaphyseal defects in rat femurs. Control animals received collagen sponge implants. After 4 and 8 weeks of implantation, bone healing was evaluated using microradiography and quantitative histomorphometry. Four weeks postsurgery, significantly less new bone was formed in both of the polymer groups (p<0.038). Reduced bone loss was also noted with the polymers at this time, although it was not statistically significant. However, at 8 weeks postsurgery, a statistically significant reduction in bone loss was observed in both of the polymer groups compared with controls (p<0.0072). Both polymers seemed to elicit identical tissue responses because there were no differences detected between the homopolymer and copolymer materials at either time point. These results indicate that locally released SA can significantly reduce both bone loss and bone formation in this animal model.