Hydrocarbon adsorption mechanism of modern automobile engines and methods of reducing hydrocarbon emissions during cold start process: A review.

With the global emphasis on environmental protection and increasingly stringent emission regulations for internal combustion engines, there is an urgent need to overcome the problem of large hydrocarbon (HC) emissions caused by unstable engine cold starts. Synergistic engine pre-treatment (reducing hydrocarbon production) as well as after-treatment devices (adsorbing and oxidizing hydrocarbons) is the fundamental solution to emissions. In this paper, the improvement of hydrocarbon emissions is summarized from two aspects: pre-treatment and after-treatment. The pre-treatment for engine cold start mainly focuses on summarizing the intake control, fuel, and engine timing parameters. The after-treatment mainly focuses on summarizing different types of adsorbents and modifications (mainly including different molecular sieve structures and sizes, preparation conditions, silicon aluminum ratio, ion exchange modification, and heterogeneity, etc.), adsorptive catalysts (mainly including optimization of catalytic performance and structure), and catalytic devices (mainly including coupling with thermal management equipment and HC trap devices). In this paper, a SWOT (strength, weakness, opportunity, and threat) analysis of pre-treatment and after-treatment measures is conducted. Researchers can obtain relevant research results and seek new research directions and approaches for controlling cold start HC emissions.

Diesel particulate filter regeneration mechanism of modern automobile engines and methods of reducing PM emissions: a review.

Diesel particulate filter (DPF) is considered as an effective method to control particulate matter (PM) emissions from diesel engines, which is included in the mandatory installation list by more and more national/regional laws and regulations, such as CHINA VI, Euro VI, and EPA Tier3. Due to the limited capacity of DPF to contain PM, the manufacturer introduced a method of treating deposited PM by oxidation, which is called regeneration. This paper comprehensively summarizes the most advanced regeneration technology, including filter structure, new catalyst formula, accurate soot prediction, safe and reliable regeneration strategy, uncontrolled regeneration and its control methods. In addition, due to the change of working conditions in the regeneration process, the additional emissions during regeneration are discussed in this paper. The DPF is not only the aftertreatment device but also can be combined with diesel oxidation catalyst (DOC), selective catalytic reduction (SCR) and exhaust recirculation (EGR). In addition, the impact of DPF modification on the original system of some old models has been reasonably discussed in order to achieve emission targets.

Effects analysis on hydrocarbon light-off performance of a catalytic gasoline particulate filter during cold start.

In order to study the hydrocarbon combustion in the low-temperature catalytic process of a catalytic gasoline particulate filter (CGPF) during cold start, a mathematical model of the CGPF is established and verified firstly. Then, take T50 (a temperature when the hydrocarbon conversion rate reaches 50%) as hydrocarbon light-off (LO) temperature; the effects of different exhaust parameters and structural parameters on hydrocarbon light-off performance and reaction rate are investigated based on simulation results. Finally, orthogonal experiment analysis is employed to further obtain the most significant factors and suggested parameter solution. The results show that the hydrocarbon LO performance of the CGPF during cold start is positively correlated with exhaust oxygen concentration, porosity, and filter length, but it is negatively correlated with exhaust flow rate and exhaust water vapor concentration. In addition, the inlet of the channel has a significant HC reaction when the oxygen concentration reaches 2.2%, and porosity mainly influences the front half part of the filter. Moreover, the influence degree relationship of the five factors is oxygen > mass flow > porosity > length > water vapor, and the optimum solution of length, vapor, mass flow, porosity, and oxygen is 150 mm, 12.31%, 0.002 kg/s, 0.55, and 2.2%, respectively. This work offers us great reference value for CGPF performance enhancement and hydrocarbon abatement of a GDI engine.