RESUMEN
Jarosite exists widely in acid-sulfate soil and acid mine drainage polluted areas and acts as an important host mineral for As(V). As a metastable Fe(III)-oxyhydoxysulfate mineral, its dissolution and transformation have a significant impact on the biogeochemical cycle of As. Under reducing conditions, the trajectory and degree of abiotic Fe(II)-induced jarosite transformation may be greatly influenced by coexisting dissolved organic matter (DOM), and in turn influencing the fate of As. Here, we explored the impact of polygalacturonic acid (PGA) (0-200 mg·L-1) on As(V)-coprecipitated jarosite transformation in the presence of Fe(II) (1 mM) at pH 5.5, and investigated the repartitioning of As between aqueous and solid phase. The results demonstrated that in the system without both PGA and Fe(II), jarosite gradually dissolved, and lepidocrocite was the main transformation product by 30 d; in Fe(II)-only system, lepidocrocite appeared by 1 d and also was the mainly final product; in PGA-only systems, PGA retarded jarosite dissolution and transformation, jarosite might be directly converted into goethite; in Fe(II)-PGA systems, the presence of PGA retarded Fe(II)-induced jarosite dissolution and transformation but did not alter the pathway of mineral transformation, the final product mainly still was lepidocrocite. The retarding effect on jarosite dissolution enhanced with the increase of PGA content. The impact of PGA on Fe(II)-induced jarosite transformation mainly was related to the complexation of carboxyl groups of PGA with Fe(II). The dissolution and transformation of jarosite drove pre-incorporated As transferred into the phosphate-extractable phase, the presence of PGA retarded jarosite dissolution and maintained pre-incorporated As stable in jarosite. The released As promoted by PGA was retarded again and almost no As was released into the solution by the end of reactions in all systems. In systems with Fe(II), no As(III) was detected and As(V) was still the dominant redox species.
RESUMEN
The Fe(II)/Fe(III) cycle is an important driving force for dissolution and transformation of jarosite. Divalent heavy metals usually coexist with jarosite; however, their effects on Fe(II)-induced jarosite transformation and different repartitioning behavior during mineral dissolution-recrystallization are still unclear. Here, we investigated Fe(II)-induced (1 mM Fe(II)) jarosite conversion in the presence of Cd(II), Mn(II), Co(II), Ni(II) and Pb(II) (denoted as Me(II), 1 mM), respectively, under anaerobic condition at neutral pH. The results showed that all co-existing Me(II) retarded Fe(II)-induced jarosite dissolution. In the Fe(II)-only system, jarosite first rapidly transformed to lepidocrocite (an intermediate product) and then slowly to goethite; lepidocrocite was the main product. In Fe(II)-Cd(II), -Mn(II), and -Pb(II) systems, coexisting Cd(II), Mn(II) and Pb(II) retarded the above process and lepidocrocite was still the dominant conversion product. In Fe(II)-Co(II) system, coexisting Co(II) promoted lepidocrocite transformation into goethite. In Fe(II)-Ni(II) system, jarosite appeared to be directly converted into goethite, although small amounts of lepidocrocite were detected in the final product. In all treatments, the appearance or accumulation of lepidocrocite may be also related to the re-adsorption of released sulfate. By the end of reaction, 6.0 %, 4.0 %, 76.0 % 11.3 % and 19.2 % of total Cd(II), Mn(II), Pb(II) Co(II) and Ni(II) were adsorbed on the surface of solid products. Up to 49.6 %, 44.3 %, and 21.6 % of Co(II), Ni(II), and Pb(II) incorporated into solid product, with the reaction indicating that the dynamic process of Fe(II) interaction with goethite may promote the continuous incorporation of Co(II), Ni(II), and Pb(II).
Asunto(s)
Compuestos Férricos , Metales Pesados , Minerales , Compuestos Férricos/química , Minerales/química , Metales Pesados/química , Cationes Bivalentes , Sulfatos/química , Compuestos Ferrosos/química , Manganeso/química , Hierro/química , Contaminantes del Suelo/químicaRESUMEN
Roadway runoff serves as a crucial pathway for transporting contaminants of emerging concern (CECs) from urban environments to receiving water bodies. Tire-related compounds originating from tire wear particles (TWPs) have been frequently detected, posing a potential ecological threat. Yet, the photolysis of tire-related compounds within roadway runoff remains inadequately acknowledged. Addressing this deficit, our study utilized high-resolution mass spectrometry (HRMS) to characterize the chemical profile of roadway runoff across eight strategically selected sites in Guangzhou, China. 219 chemicals were identified or detected within different confidence levels. Among them, 29 tire-related contaminants were validated with reference standards, including hexa(methoxymethyl)melamine (HMMM), 1,3-diphenylguanidine (DPG), dicyclohexylurea (DCU), and N-cyclohexyl-2-benzothiazol-amine (DCMA). HMMM exhibited with the abundance ranging from 2.30 × 104-3.10 × 106, followed by DPG, 1.69 × 104-8.34 × 106. Runoff sample were exposed to irradiation of 500 W mercury lamp for photodegradation experiment. Photolysis results indicated that tire-related compounds with a low photolysis rate, notably DCU, DCMA, and DPG, are more likely to persist within the runoff. The photolytic rates were significantly correlated with the spatial distribution patterns of these contaminants. Our findings underscore TWPs as a significant source of pollution in water bodies, emphasizing the need for enhanced environmental monitoring and assessment strategies.
RESUMEN
Micellar-enhanced ultrafiltration (MEUF) technology is an effective method to treat low-concentration heavy metal wastewater. However, the leakage of surfactants in the ultrafiltration (UF) process will inevitably cause secondary pollution. In this study, a biosurfactant of conjugated linoleic acid (CLA) with conjugated double bonds was selected to bind its micelles by simple thermal crosslinking to obtain morphologically stable stearic acid (SA) nanoparticles. The pure SA nanoparticles were obtained by repeated dialysis. The stability of the SA nanoparticles was verified by comparing the particle size distribution and solubility of the materials before and after crosslinking at different pH levels. The effectiveness of SA nanoparticle-enhanced UF in removing heavy metals was verified by exploring the adsorption performance of SA nanoparticles. The dialysis device was used to simplify the UF device, wherein SA nanoparticles were assessed as adsorbents for the elimination of Cu2+, Pb2+, and Cd2+ ions from aqueous solutions under diverse process parameters, including pH, contact time, metal ion concentration, and coexisting ions. The findings indicate that the SA nanoparticles have no evidence of secondary contamination in UF and exhibit compatibility with a broad pH range and coexisting ions. The maximum adsorption capacities for Cu2+, Pb2+, and Cd2+ were determined to be 152.77, 403.56, and 271.46 mg/g, respectively.
Asunto(s)
Ácidos Linoleicos Conjugados , Metales Pesados , Contaminantes Químicos del Agua , Cadmio , Micelas , Agua , Plomo , Metales Pesados/química , Adsorción , Contaminantes Químicos del Agua/química , Concentración de Iones de Hidrógeno , CinéticaRESUMEN
Tributyl phosphate (TNBP), a new type of flame retardant, is an emerging pollutant and has been frequently detected in various matrices such as wastewater. Efficient removal of TNBP is critical for wastewater treatment. In this study, molecularly imprinted polymer (MIP) was prepared using precipitation polymerization for selective adsorption of TNBP. The results showed that MIP had a porous structure and formed effective imprinting cavities, which was primarily responsible for its superior adsorption ability. The adsorption of TNBP by MIP was carried out following both the pseudo-secondary kinetic model and the Langmuir isothermal adsorption model. MIP adsorbed TNBP rapidly and reached adsorption equilibrium within 30 min with 923 µmol g-1 at 298 K. The adsorption capacity and adsorption rate of MIP were respectively 2 and 5.49 times those of non-molecularly imprinted polymers. In addition, MIP could effectively counter disturbances from external parameters like temperature and pH, exhibiting strong environmental flexibility. MIP can specifically adsorb organophosphate esters, and can selectively adsorb TNBP under the interference of coexisting contaminants such as1,3-diphenylguanidine and isazofos. In actual bodies of water, MIP's highly selective adsorption of TNBP retains its advantage. The selective adsorption of MIP was mainly due to the common phosphate skeleton, and the specific substituent of organophosphate esters played an important role in the imprinting process. Hydrogen bonding might be involved in the polymerization process of TNBP with acrylamide and the adsorption process of TNBP by MIP.MIP exhibited good reuse efficiency, the total adsorption capacity decreased by no more than 25% after 7 reuse cycles. This study provides a simple and efficient method for selective removal of organophosphate from wastewater.
Asunto(s)
Impresión Molecular , Polímeros , Polímeros/química , Aguas Residuales , Agua , Adsorción , Organofosfatos , Impresión Molecular/métodosRESUMEN
Quenching method is widely used to assess the contribution of specified reactive species through the probe inhibition efficiency (IE) caused by adding excessive quencher. However, for reactive species with weak ability such as singlet oxygen (1O2), the quenching results are prone to ambiguity. In this study, an 1O2 system using furfuryl alcohol (FFA) as a probe was successfully constructed by methylene-blue-N vis-photosensitization, to discuss the quenching, interference elimination and pollutant degradation ability of 1O2. Inhibition of FFA transformation caused by both quenching and interrupting of 1O2 production was found. The quenching is affected by quencher dosage and ability, which depends on the second-order-rate constant (k). A high k means a strong ability, and less dosage is required to achieve the same IE. Comparison between the calculated ratio of reactive species consumed by quencher and experimental IE helps to judge the interruption of 1O2 production. None of the organic-solvents (methanol, ethanol, iso-propanol, n-butanol, iso-butanol, tert-butanol, tetrahydrofuran, acetonitrile, acetone and chloroform) scavenged 1O2, which would be used as screening-agent for other reactive species (e.g., hydroxyl radicals) that would interrupt 1O2 contribution assessment. Besides, 1O2 was powerless to degrade most selected pollutants. These results encourage proper use of quenchers and better experimental design.
RESUMEN
Sulfidated zero-valent iron (S-ZVI) has shown significant potential for the removal of arsenic(III). However, little attention has been paid to the mechanism of As(III) sequestration enhancement and how the phase transformation for S-ZVI strengthens this process in aerobic conditions. In this work, sulfidated ZVI was created by ball-milling (S-ZVIbm) and liquid-mixing (S-ZVIlm) of ZVI with elemental sulfur(S0) to investigate the performance and mechanisms of As(III) sequestration in air-saturated water. Sulfidation was found to significantly enhance the As(III) removal rate constant, which was 2.8 â¼ 6.7 times (S-ZVIbm) and 3.1 â¼ 17.1 times (S-ZVIlm) higher than that without sulfidation. FeS was identified as the predominant sulfur species in the S-ZVI samples using S K-edge XANES spectra. The enhanced electron transfer and ZVI corrosion after sulfidation were verified via electrochemical tests. XANES and Mössbauer spectra suggested that lepidocrocite(γ-FeOOH) was the predominant corrosion product generated on the ZVI surface with the presence of oxygen, and DFT calculations further confirmed the improved performance of γ-FeOOH for As(III) sequestration. Besides, As(III) oxidation occurred dominantly on the heterogeneous surface rather than in solution, and the As(III) sequestration pathway of adsorption followed by oxidation was proposed. This study provides new insight into the enhanced As(III) sequestration by S-ZVI in aerobic conditions.
RESUMEN
Soil washing techniques can effectively remove soil polybrominated diphenyl ethers (PBDEs), but further removal of PBDEs from washing effluent is disrupted by environmental factors and coexisting organic matter. Hence, this work prepared novel magnetic molecularly imprinted polymers (MMIPs) to selectively remove PBDEs in soil washing effluent and recycling surfactants, with Fe3O4 nanoparticles as the magnetic core, methacrylic acid (MAA) as the functional monomer, and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. Later, the prepared MMIPs were applied to adsorb 4,4'-dibromodiphenyl ether (BDE-15) in Triton X-100 soil-washing effluent and characterized by scanning electron microscopy (SEM), infrared spectrometry (FT-IR), nitrogen adsorption and desorption experiments. According to our observations, BDE-15 equilibrium adsorptions on dummy-template magnetic molecularly imprinted adsorbent (D-MMIP, 4-bromo-4'-hydroxyl biphenyl as template) and part-template magnetic molecularly imprinted adsorbent (P-MMIP, toluene as template) were reached within 40 min, and their equilibrium adsorption capacities were 164.54 µmol/g and 145.55 µmol/g, respectively, with imprinted factor α > 2.03, selectivity factor ß > 2.14, and selectivity S > 18.05. MMIPs exhibited good adaptability to pH, temperature, and cosolvent. Our Triton X-100 recovery rate reached as high as 99.9%, and MMIPs maintained a more than 95% adsorption capacity after being recycled five times. Our results offer a novel approach to selectively remove PBDEs in soil-washing effluent, with efficient recovery of surfactants and adsorbents in soil-washing effluent.
Asunto(s)
Impresión Molecular , Polímeros Impresos Molecularmente , Éteres Difenilos Halogenados , Impresión Molecular/métodos , Polímeros/química , Espectroscopía Infrarroja por Transformada de Fourier , Octoxinol , Adsorción , Fenómenos MagnéticosRESUMEN
Polybrominated dibenzofurans (PBDFs) are characteristic dioxin-like products of polybrominated diphenyl ether (PBDE) photolysis. In this study, competition mechanisms of radical-based cyclization and hydrogen abstraction reactions are proposed in PBDF formation. Commonly, the ortho C-Br bond dissociation during photolysis generates aryl radicals, which undergo intramolecular cyclization to form PBDFs or hydrogen abstraction with hydrogen donors (such as organic solvents and water) to form lower brominated PBDEs. By using 2,4,4'-tribromodiphenyl ether (BDE-28) as the model reactant, the experimental PBDF formation ratios in various solutions are explained quantitatively by the calculated rate constants of cyclization and hydrogen abstraction reactions using the density functional theory (DFT) method. The solvent effect of pure and mixed solvents on PBDF formation is illustrated successfully. The structure-related hydrogen donation ability for hydrogen abstraction controls the bias of competition reactions and influences PBDF formation. Water resulted to be the most significant generation of PBDFs. Fulvic and humic acid display higher hydrogen donation ability than small-molecule organics due to the partitioning effect in aqueous solution. Quantitative structure-activity relationship (QSAR) models of the calculated rate constants for 512 cyclization and 319 hydrogen abstraction reactions using 189 PBDEs as the initial reactants in water are established, revealing the high risk of PBDF formation in aqueous solution.
Asunto(s)
Éteres Difenilos Halogenados , Agua , Éteres Difenilos Halogenados/química , Fotólisis , Ciclización , Solventes , Agua/químicaRESUMEN
Polybrominated diphenyl ethers (PBDEs) as a typical brominated flame retardant (BFR) have attracted worldwide attention due to the high environmental risk and resistance to conventional remediation processes. In this study, thermally activated persulfate (TAP) process was applied to degrade 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), which is the most toxic and representative PBDEs in e-waste dismantling sites. Impact factors such as PDS dosage, heating temperature, and initial pH were evaluated. Results showed that BDE-47 can be 100% degraded within 180 min under the condition of PDS:BDE-47 = 1000:1, 60 °C, and pH = 7. Quenching experiments combined with EPR analysis further proved the important role of SO4·- in oxidating BDE-47. According to high-resolution mass spectrometry (HRMS) analysis, only one oxidation product of low toxicity was detected during the oxidation process. Theoretical calculations further revealed that the oxidation process mainly involved radical attack at C-Br bond, cleavage of C-Br bond, and fission of ether bond, and HSO4· may also play an important role in BDE-47 degradation in TAP system. In addition, TAP system exhibited universality as all selected PBDE congeners can be degraded, and the degradation rate of PBDEs was greatly affected by the number of substituted Br atoms in a negative trend. Overall, these findings indicate that TAP can be applied as an effective method for removal of PBDEs, and we provide a new insight for the practical application of TAP technology in BDE-47 degradation from experimental and theoretical aspects.
Asunto(s)
Retardadores de Llama , Éteres Difenilos Halogenados , Éteres Difenilos Halogenados/análisis , Éter , Éteres de Etila/análisis , Cromatografía de Gases y Espectrometría de Masas , Retardadores de Llama/análisisRESUMEN
Surfactant enhanced elution is an effective method for removing hydrophobic organic pollutants from soils. The key to the development of leaching technology is selective removal of targeted pollutants in soil washing effluent and recycling of surfactant solutions. In this study, a molecular imprinting technique was applied to selectively sorb polybrominated diphenyl ethers (PBDEs) in soil washing effluent. The novel molecular imprinted polymers (MIPs) using different template molecules were synthesized by precipitation polymerization. Adsorption behaviors and mechanisms of MIPs were studied through experiments and theoretical calculations. The results show that 4-bromo-4'-hydroxybiphenyl and toluene can be effective imprinting molecule for MIPs synthesis. The maximal adsorption capacity of selected dummy molecular imprinted polymer (D1-MIP) was 1032.36 µmol/g, and that of part molecular imprinted polymer (P-MIP) was 981.13 µmol/g. Their imprinting factors in 5 PBDEs adsorption ranged from 2.13 to 5.88, the recovery percentage of Triton X-100 can reach 99.09%, confirming the feasibility of reusing surfactant. Various PBDEs could be removed by MIPs, and Quantitative Structure Property Relationship analysis revealed that PBDEs' molecular volume, planarity, polarity, and hydrophobicity have major influences on their adsorption performance. DFT calculation revealed that Van der Waals force and hydrogen bonding played important roles during selective adsorption. These results can provide effective theoretical guidance for surfactant enhanced soil elution in practical engineering applications.
Asunto(s)
Contaminantes Ambientales , Impresión Molecular , Éteres Difenilos Halogenados , Impresión Molecular/métodos , Polímeros/química , Tensoactivos , AdsorciónRESUMEN
Tris(2-chloroethyl) phosphate (TCEP) as a new type of flame retardant exists in various water environments, causing great risks to humans and the environment. In this study, shrimp shell was used to prepare an economical and environmental-friendly adsorbent for the efficient removal of TCEP. The systematic studies including characterization, removal performance, and adsorption mechanism of shrimp shell biochar toward TCEP were carried out. Adsorption kinetics and thermodynamics showed that fast equilibrium reached within 30 min, the maximum adsorption capacity qm was 108 µmol g-1 at 298 K, and the adsorption process is spontaneous and exothermic. The environmental factor, such as temperature, pH, inorganic anions and organic matter hardly affected the adsorption performance. Structural characterization indicated that the hierarchical porous structure of shrimp shell biochar is the key to excellent adsorption performance. The adsorption mechanisms were further revealed using density functional theory (DFT) calculations, and the hydrogen bond, van der Waals interactions, Cl-H interactions, and pi-H interactions were identified as potential interaction mechanisms between TCEP and specific biochar structures. The calculated binding energy between TCEP and simplified biochar structure suggested that oxygen-containing groups especially carboxyl, hydroxyl and aldehyde facilitate the adsorption. Our work not only provides a novel strategy for the quick remediation of organophosphate-contaminated water environments but also offers new opportunities for crustacean waste biomass valorization.
Asunto(s)
Organofosfatos , Contaminantes Químicos del Agua , Humanos , Adsorción , Teoría Funcional de la Densidad , Porosidad , Fosfatos , Agua , CinéticaRESUMEN
The development of efficient, environmentally friendly soil amendments is necessary in order to minimize the risk of metal contaminants (Cd, Pb, Cu, and Zn) to the soil ecosystem. As soil amendments, bovine bone meal (BM) and oyster shell meal (OS) reduced the mobility and bioavailability of metals primarily by increasing soil pH. Soil geochemical properties (pH, EC, CEC, Ca, P, and K) after amendment supplementation were more likely to affect metal migration than enzyme activity. Furthermore, BM and OS were found to suppress the Cd and Pb uptake by water spinach, keeping them below international standards for safe utilization. The protein and sugar content and peroxidase (POD) activity showed a significant negative correlation with the amount of metal in water spinach, whereas superoxide dismutase (SOD), ascorbate peroxidase (APX) activities and malondialdehyde (MDA) content exhibited a positive correlation with metal content in water spinach. We also found that BM and OS had less perturbation to phylum-level and genus-level bacterial composition during the remediation of heavy metals contaminated soil. Based on the above, we assume that BM and OS are eco-friendly soil amendments, which could improve soil nutrients contents, stabilize heavy metals and regulate bacterial community structure. Our research contributes to resource utilization of waste and holds promise for widespread application in current agricultural systems.
Asunto(s)
Metales Pesados , Ostreidae , Contaminantes del Suelo , Animales , Bovinos , Suelo/química , Cadmio/metabolismo , Verduras/metabolismo , Ecosistema , Plomo , Contaminantes del Suelo/análisis , Metales Pesados/análisis , Carbonato de Calcio , Bacterias/metabolismo , Ostreidae/metabolismoRESUMEN
In order to investigate the pollution status of polycyclic aromatic hydrocarbons (PAHs) in the agricultural soil, 240 agricultural soil topsoil samples were collected from nine Pearl River Delta cities from June to September 2019. In addition, 72 samples were collected for vertical soil profiles, which soil profiles were excavated to a depth of 80 cm. After sample preparation, GC-MS was used for the separation of compounds on a HP-5MS quartz capillary column. ArcGIS software was used to map the spatial distribution. Health risk assessment was conducted using USEPA standard. The results showed that the total concentration of 16 PAHs ranged from 43.4 to 5630 ng/g, with an average of 219 ng/g. The spatial distribution showed that most of the seriously polluted areas were in the coastal area, near the port, and there was point source pollution in the Gaoming of Foshan. Vertically distributed display Zhuhai, Jiangmen, Zhaoqing, Shenzhen and Dongguan increased and then decreased from bottom to bottom, showing a low-high-low pattern, the concentration of PAHs in Zhongshan and Foshan decreased with the soil depth, while the concentration of PAHs in Guangzhou and Huizhou was enriched with human activities. The PAHs components in soil samples were mainly medium and high rings (4−6 rings). The analysis of the origin of PAH in soil samples showed that the mixture of incomplete combustion sources of fossil fuels such as coal and biomass and traffic emission sources were the main sources of soil PAHs. A small amount can be attributed to oil sources such as oil spills. The human health risk assessment showed no cancer risk for children, while for adults, may cause a potential risk of cancer, which needs to be noticed. Spearman correlation analysis showed that PAH content was significantly correlated with SOC (p < 0.01) and pH (p < 0.05). Port transport, road emissions and industrial production make the area a pollution hot topic, and supervision should be strengthened to protect the environment and food safety.
Asunto(s)
Hidrocarburos Policíclicos Aromáticos , Contaminantes del Suelo , Adulto , Niño , Humanos , Hidrocarburos Policíclicos Aromáticos/análisis , Suelo/química , Contaminantes del Suelo/análisis , Monitoreo del Ambiente/métodos , Agricultura , Medición de Riesgo , ChinaRESUMEN
This study presents the comprehensive investigation for formation pathways of chloro-bromo-mixed products from the pyrolysis of polybrominated diphenyl ethers (PBDEs). In the study, a total of 23 PBDEs with bromination levels from mono-to deca-were selected. Each PBDE standard was sealed in the glass vial and then heated under 450 °C in the muffle furnace to simulate the pyrolysis process. The results demonstrated that PBDEs in the glass vials can unintentionally transform into chloro-bromo diphenyl ethers (PBCDEs) and dibenzo-p-dioxin and dibenzofurans (PBCDD/Fs) during the pyrolysis process. Atmosphere pressure gas chromatography (APGC) coupled with high-resolution mass spectrometry (HRMS) was used to identify these pyrolysis products, which demonstrated that all investigated nPBDEs (n represents the number of bromine substituents) can unintentionally transform into Cl1-(n-1)BDEs, Cl2-(n-2)BDEs, Cl1-(n-1)BDFs, and Cl1-(n-3)BDDs, while some nPBDEs can transform into Cl1-(n-2)PBDD/Fs during pyrolysis. Experimental phenomena assisted with density functional theory (DFT) calculations reveal that Cl atom can substitute at C-Br rather than C-H, and Cl1-(n-1)BDEs can be easily generated by Cl atom attacking at C-Br sites with low energy barriers (3.66-11.9 kcal/mol). In addition, nPBDEs with lower bromination levels are more favorable to generate Cl1-(n-1)BDEs than those with higher bromination levels. Further DFT calculations suggest that PBDEs are preferentially first transformed into Cl1-(n-1)BDEs, then subsequentially transform into PBCDD/Fs. We believe the results of this study can greatly improve our understanding of the transformation mechanism from PBDEs to cholo-bromo-mixed products in thermal treatment processes and provide new insight into controlling the emission of toxic cholo-bromo-mixed products.
Asunto(s)
Dibenzofuranos , Éteres Difenilos Halogenados , Bromo/química , Dibenzofuranos/análisis , Dioxinas , Monitoreo del Ambiente , Cromatografía de Gases y Espectrometría de Masas , Éteres Difenilos Halogenados/análisis , PirólisisRESUMEN
Phthalate esters (PAEs) are widely used as plasticizers in industrial and commercial products, and are classified as endocrine-disrupting compounds. In this study, we investigated the contamination characteristics and health risks of PAEs in the soil-plant system in coastal areas of South China. PAEs were detected in soil and plant samples at all 37 sampling sites. The total concentration of the 15 PAEs in soil samples ranged from 0.445 to 4.437 mg/kg, and the mean concentration was 1.582 ± 0.937 mg/kg. The total concentration of the 15 PAEs in plant samples ranged from 2.176 to 30.276 mg/kg, and the mean concentration was 8.712 ± 5.840 mg/kg. Di(2-Ethylhexyl) phthalate (DEHP) and di-n-butyl phthalate (DnBP) were the major PAEs compounds in all samples. The selected contaminants exhibited completely different spatial distributions within the study area. Notably, higher concentrations of PAEs were found in the coastal Guangdong Province of South China. The average noncarcinogenic risks of Σ6 PAEs were at acceptable levels via dietary and nondietary routes. However, the noncarcinogenic risks posed by DEHP and DBP at some sampling sites were relatively high. Furthermore, dietary and nondietary carcinogenic risks were very low for BBP, but carcinogenic risks posed by DEHP via diet. The results suggest that PAEs in the coastal soil-plant system in South China, through human risk assessment, will induce some adverse effects on human health, especially in children. This study provides an important basis for risk management of PAEs in agriculture, and safety in coastal areas of South China.
Asunto(s)
Dietilhexil Ftalato , Ácidos Ftálicos , Contaminantes del Suelo , Niño , China , Dibutil Ftalato , Dietilhexil Ftalato/análisis , Ésteres/análisis , Humanos , Ácidos Ftálicos/análisis , Suelo , Contaminantes del Suelo/análisis , VerdurasRESUMEN
Organophosphate esters (OPEs) are a new class of flame retardants present in diverse waters. The study focused on the removal of aqueous OPEs using functionalized MIL-101(Fe), which was a representative of the metal-organic frameworks (MOFs). Adsorption kinetics of tris(2-chloroethyl) phosphate (TCEP), tributyl phosphate (TnBP), and triphenyl phosphate (TPhP) were investigated. Additionally, TCEP was selected as the model contaminant to study the adsorption isotherms, thermodynamics, and effect of solution matrix properties. Adsorption mechanisms obtained from the experiments were confirmed using density functional theory (DFT) calculations. Adsorption kinetics indicated that functionalized MOFs provided a significant enhancement to the removal of TCEP. The maximum adsorption capacities qm of MIL-101(Fe), MIL-101(Fe)-NH2, MIL-101(Fe)-OH, and MIL-101(Fe)-CH3 at 298 K for TCEP were 76.040, 282.940, 119.680, and 181.274 µmol/g, respectively. By comparing the adsorption behavior of functionalized MOFs, MIL-101(Fe)-NH2 was proved to be most efficient for TCEP removal. Based on the adsorption experiments and DFT calculations, TCEP removal was dominated by physical adsorption. The van der Waals (vdW) interactions and hydrogen bonding were assumed to be involved in the adsorption. This work proves that appropriate ligand functionalization is promising for the removal of aqueous OPEs, which also provides a new insight for the control of OPEs pollution.
Asunto(s)
Estructuras Metalorgánicas , Adsorción , Teoría Funcional de la Densidad , Ésteres , Ligandos , Organofosfatos , AguaRESUMEN
Environmental release of acid mine drainage (AMD) poses a potential threat to the environment and human health due to its high content of heavy metals. The impact of AMD flooding on unpolluted soil leads to serious pollution over time via a complex process, related to the geochemical behavior of toxic metals that so far has only been partially investigated. Here, a soil column study was conducted to investigate the migration of Cu and Cd fractions in unpolluted paddy soil following treatment with AMD collected from the Dabaoshan Mining area. Tessier's sequential extraction was performed to fractionate the metals at various depths over time. After 160 days of experimental flooding, the soil pH stabilized at 2.52 at a column depth of 5 cm. The fractions of Cu and Cd that were highly mobile increased significantly during AMD flooding. For Cd, the latter already occurred on day 67. At a depth of 20 cm, the total content of Cu maximally increased from initially 26.89 mg kg-1 to 696.96 mg kg-1 on day 160, while the content of Cd maximally increased from 0.22 mg kg-1 to 391.30 mg kg-1 on day 67. Reduced partition index analysis conformed that the mobility of both Cu and Cd significantly increased in contaminated soil during continuous AMD flooding. Scanning electron microscopy coupled with energy dispersive spectroscopy (SEM-EDS) identified a changed distribution of the elements in the soil, with Fe appearing to have aggregated. The correlation analysis between Cu and Cd in pore water and in different fractions in the soil's solid phase identified a dynamic distribution of these metals in certain geochemical components during their migration. The results of this study contribute to a scientific foundation to describe the geochemical behavior of heavy metals in soil subject to AMD flooding.
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Cadmio/análisis , China , Monitoreo del Ambiente , Humanos , Metales Pesados/análisis , Minería , Suelo/química , Contaminantes del Suelo/análisisRESUMEN
The environmental problems caused by mining are continuous and multifaceted, in order to help manage and plan restored mining areas, the bioavailability of metals is an effective tool for measuring the potential risks to human health. This study analyzes the geochemical fractions of eight metals (As, Cd, Cr, Cu, Mn, Ni, Pb, and Zn) to compare their bioavailability and establishes a Hierarchical health risk (HHR) model to assess the human health risks of the mine area after restoration. The results indicated that children have the highest non-carcinogenic risks exposed through ingestion (HI-ingestion) due to their special behaviors; HI-dermal may be enriched in the body; and HI-inhalation is lowest, as it is related to soil particle size. Affected by local economic development, environmental climate, soil type, and mining, the carcinogenic risk of exposure through the skin (CR-dermal) for adults significantly exceeds the acceptable safety level (ASL). The spatial distribution shows that the harm of mining to human health is a continuous process. There was still a significant CR for adults after remediation, and the HI of tailings exposure was more serious. The Classification and Regression Tree (CART) model of metal bioavailability was developed by integrating the extrinsic and intrinsic factors of metals to explore the effects of different factors on metal bioavailability and predict. The results showed that the bioavailability of metals was a dynamic process that combined land use, the distance to traffic roads, physicochemical properties of soil, and geochemical fractions of metal, and that it affects human health both directly and indirectly. Due to the fragility and sensitivity of the ecosystem after the mining area is restored, it may face greater environmental health risks.
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Adulto , Disponibilidad Biológica , Niño , China , Ecosistema , Monitoreo del Ambiente , Humanos , Metales Pesados/análisis , Medición de Riesgo , Suelo , Contaminantes del Suelo/análisisRESUMEN
Organophosphorus esters (OPEs), one kind of the emerging contaminants with high frequency of detection, is rather refractory in natural environment, thus posing great threat to human health. This study investigated the feasibility and mechanism of tris(2-chloroethyl) phosphate (TCEP) degradation in thermally activated persulfate (TAP) system. Influence of impact factors, such as PDS dosage, temperature, initial pH, and presence of natural water matrix (Cl-, NO3-, H2PO4-, NH4+, humic acid), were evaluated. Results showed that 100% degradation of TCEP can be achieved in TAP system in 40 min at 60 °C. SO4·- as the dominant oxidant for TCEP degradation was proved by quenching experiment and verified by EPR analysis. Alkaline condition exerted great inhibitory effect by affecting the constituents of oxidative radicals. It is suggested that Cl- and H2PO4- at lower dosages promoted the degradation by stimulating ·OH production and forming oxidative radicals with better selectivity. Intermediates identified by high resolution mass spectrometer was suggested less toxic than TCEP by ECOSAR program. Meanwhile, the illustrated oxidation mechanism mainly involved radical attack at CCl bond and cleavage of CO bond, as further confirmed by frontier electron density calculation and wavefunction analysis. Moreover, cyclic degradation of TCEP indicated the constant release of SO4·- in 450 min, suggesting high efficiency and stability of PDS in TAP system. Four selected OPEs achieved complete removal in TAP system and their degradation discrepancy was further discussed based on the distinctive structures. Altogether, TAP technology can be used as an efficient method in TCEP removal with great potential for application.