RESUMEN
The compatibility of the wrought Al-Ca alloy with the element Fe was investigated in the present study. In this work, both the Al-Ca alloy and Al-Ca-Fe alloy were synthesized through melting, casting, heat treatment, and rolling. A new ternary Al-Ca-Fe eutectic phase, identified as Al10CaFe2 with an orthorhombic structure, demonstrated enhanced performance, as revealed by nanoindentation tests. Combining the results of the nanoindentation and EBSD, it can be inferred that during the rolling and heat treatment process, the divorced eutectic phases were broken and spheroidized, and the structure of the Fe-rich alloy became finer, which promotes the formation of fine grains during the process of dynamic recrystallization and effectively hindered the grain growth during thermal treatment. Consequently, the strength of the as-rolled Al-Ca alloy was improved with the addition of 1 wt.% Fe while the ductility of the alloy was maintained. Therefore, adding Ca into the high-Fe content recycled aluminum altered the form of the Fe-containing phases in the alloy, effectively expanding the application scope of recycled aluminum alloy manufacturing. This approach also offered a method for strengthening the Al-Ca aluminum alloys. Compared to the traditional approach of reducing Fe content in alloys through metallurgical means, this study opened a new avenue for designing novel, renewable aluminum alloys highly compatible with impurity iron in scrap.
RESUMEN
In the complex engineering applications of electromagnetic (EM) wave-absorbing materials, it is insufficient for these materials to exhibit only efficient EM wave attenuation ability. EM wave-absorbing materials featuring numerous multifunctional properties are increasingly attractive for next-generation wireless communication and smart devices. Herein, we constructed a lightweight and robust multifunctional hybrid aerogel consisting of carbon nanotubes/aramid nanofibers/polyimide with low shrinkage and high porosity. The hybrid aerogels exhibit excellent EM wave attenuation, with an effective absorption bandwidth covering the entire X-band from 25 °C to 400 °C. The conductive loss capacity of the hybrid aerogel is enhanced under thermal drive, which results in an enhanced ability to attenuate EM waves, as evidenced by the fact that the best-fit thickness drops from 5.3 to 3.6 mm with increasing temperature. In addition, the hybrid aerogels are capable to efficiently absorb sound waves, with an average absorption coefficient as high as 0.86 at 1-6.3 kHz, and they exhibit superior thermal insulation properties, with a thermal conductivity as low as 41 ± 2 mW/mK. They are thus suitable for applications in the anti-icing and infrared stealth fields. The prepared multifunctional aerogels have considerable potential for EM protection, noise reduction, and thermal insulation in harsh thermal environments.
RESUMEN
Realizing ultra-wideband absorption, desirable attenuation capability at high temperature and mechanical requirements for real-life applications remains a great challenge for microwave absorbing materials. Herein, we have constructed a porous carbon fiber/polymethacrylimide (CP) structure for acquiring promising microwave absorption performance and withstanding both elevated temperature and high strength in a low density. Given the ability of porous structure to induce desirable impedance matching and multiple reflection, the absorption bandwidth of CP composite can reach ultra-wideband absorption of 14 GHz at room temperature and even cover the whole X-band at 473 K. Additionally, the presence of imide ring group in polymethacrylimide and hard bubble wall endows the composite with excellent heat and compressive behaviors. Besides, the lightweight of the CP composite with a density of only 110 mg cm-3 coupled with high compressive strength of 1.05 MPa even at 453 K also satisfies the requirements in engineering applications. Compared with soft and compressible aerogel materials, we envision that the rigid porous foam absorbing material is particularly suitable for environmental extremes.
RESUMEN
The increasing hazard of electromagnetic radiation prompts people to pursue absorbing materials with better performance. However, absorbing materials with a single loss mechanism usually is unable to obtain better absorbing performance due to low impedance matching or high filling ratio. Therefore, this work proposes a C/NiCo2S4 (CNCS) material with both dielectric loss/magnetic loss to achieve efficient absorption of electromagnetic waves. The simple preparation of CNCS materials was achieved through the etching of the ZIF-67 template by nickel nitrate and the subsequent hydrothermal vulcanization process. Its unique prismatic dodecahedron hollow structure promotes multiple scattering of electromagnetic waves. The attachment of the magnetic NiCo2S4 particles on the surface of the carbon template further promotes the interface polarization and dipole polarization, which is equivalent to the formation of a resistance-rich microcircuit and enhances the effect of the conductance loss on electromagnetic waves. At 2-18 GHz, the CNCS-2 with 30% paraffin addition achieves an effective bandwidth of 5.54 GHz at a matching thickness of 1.7 mm, and has a maximum reflection loss of -36.44 dB at 1.5 mm. By adjusting the thickness of the material matching layer (1-3 mm), an effective bandwidth of up to 13.48 GHz can be achieved, perfectly covering the X-band and Ku-band. Based on the simple preparation process of the material, the special hollow structure and the multiple loss mechanisms for electromagnetic waves, we believe that CNCS can become a strong competitor for high-efficiency broadband absorbers.
RESUMEN
Magnetoelectric coupling is a key strategy to obtain high-performance microwave absorption materials. Especially for carbon matrix composites, the absorbing capacity can be optimized via the tuning of the graphitization degree and the content ratio of the magnetic and dielectric components. Based on this theory, a simple strategy, consisting of the solvothermal method and annealing in an inert atmosphere, is adopted in this study to combine CoNi magnetic alloys with graphitized carbon into micron-scale composite spherical particles. Additionally, special attention is paid to the correlation among the graphitization degree of carbon matrix, component proportion, and dielectric response ability, so as to achieve a flexible micromorphology design and a tunable microwave absorption performance. When the pyrolysis temperature is offset to the best of 700 â, a broadband absorption of 6.61 GHz (reflection loss < - 10 dB) is achieved at an ultrathin matching thickness of 1.9 mm. Adjusting the carbon content can further optimize the impedance matching and realize a high-intensity absorption with a reflection loss of - 72.7 dB. Our work proposes a useful strategy to realize the effective combination of the magnetic and dielectric loss mechanisms and boost the microwave absorption capacity toward achieving the desired broadband and a high-efficiency absorption performance.
RESUMEN
Collecting duct carcinoma (CDC) is a rare and highly aggressive subtype of kidney cancer that is associated with a poor prognosis. At present, there is no effective treatment for CDC. Herein, we report a case of metastatic CDC treated with a combination of a tyrosine kinase inhibitor and an immune checkpoint inhibitor. A 67-year-old male was diagnosed with CDC with lung and bone metastasis. Pazopanib and camrelizumab were administered after cytoreductive nephrectomy. The patient achieved a partial response after one cycle of treatment; however, he then experienced serious drug-induced hepatic injury. Therefore, we discontinued camrelizumab and administered monotherapy with pazopanib. Three months later, the cancer had progressed and axitinib and sintilimab were administered. The patient achieved a partial response, accompanied by the complete disappearance of the metastatic lesion in the lung. The patient had an excellent physical status after 11 months. This is the first reported case of metastatic CDC successfully treated with a combination of a tyrosine kinase inhibitor and an immune checkpoint inhibitor. This form of combination treatment may be an effective option for treating metastatic CDC.
