RESUMEN
Drag-reducing surfactant solutions are very sensitive to shear. Shear can induce nanostructural transitions which affect drag reduction effectiveness and rheological properties. Literature reports on the effects of shear on different micellar solutions are inconsistent. In this paper, the effects of shear on three cationic drag-reducing surfactant solutions each with very different nanostructures and rheological behaviors, Arquad 16-50/sodium salicylate (NaSal) (5 mM/5 mM) (has thread-like micelles, shear-induced structure and large first normal stress (N(1))), Arquad S-50/NaSal (5 mM/12.5 mM) (has branched micelles, no shear-induced structure and first normal stress is about zero) and Arquad 16-50/sodium 3,4-dimethyl-benzoate (5 mM/5 mM) (has vesicles and thread-like micelles, shear-induced structure and high first normal stress (N(1))) are studied by small-angle neutron scattering (SANS), together with their rheological properties, drag reduction behavior and nanostructures by cryogenic-temperature transmission electron microscopy(cryo-TEM). The differences in the rheological behavior and the SANS data of the solutions are explained by the different responses of the nanostructures to shear based on a two-step response to shear.
RESUMEN
The oil/water interfacial assembly of tobacco mosaic virus (TMV) has been studied in situ by tensiometry and small-angle X-ray and neutron scattering (SAXS and SANS). TMV showed different orientations at the perfluorodecalin/water interface, depending on the initial TMV concentration in the aqueous phase. At low TMV concentration, the rods oriented parallel to the interface, mediating the interfacial interactions at the greatest extent per particle. At high TMV concentrations, the rods were oriented normal to the interface, mediating the interfacial interactions and also neutralizing inter-rod electrostatic repulsion. We found that the inter-rod repulsive forces between TMVs dominated the in-plane packing, which was strongly affected by the ionic strength and the bulk solution but not by the pH in the range of pH = 6-8.
Asunto(s)
Aceites/química , Virus del Mosaico del Tabaco/fisiología , Ensamble de Virus , Agua/química , Microscopía de Fuerza Atómica , Microscopía Electrónica de Transmisión , Virus del Mosaico del Tabaco/química , Virus del Mosaico del Tabaco/ultraestructuraRESUMEN
An extensive study of the factors that affect the interfacial assembly of bionanoparticles at the oil/water (O/W) interface is reported. Bionanoparticles, such as viruses, have distinctive structural properties due to the unique arrangement of their protein structures. The assembly process of such bionanoparticles at interfaces is governed by factors including the ionic strength and pH of the aqueous layer, concentration of the particles, and nature of the oil phase. This study highlights the impact of these factors on the interfacial assembly of bionanoparticles at the O/W interface using native turnip yellow mosaic virus (TYMV) as the prototype. Robust monolayer assemblies of TYMV were produced by self-assembly at the O/W interface using emulsions and planar interfaces. TYMV maintained its structure and integrity under different assembly conditions. For the emulsion droplets, they were fully covered with TYMV as evidenced by transmission electron microscopy (TEM) and scanning force microscopy (SFM). Tensiometry and small-angle neutron scattering (SANS) further supported this finding. Although the emulsions offered a complete coverage by TYMV particles, they lacked long-range ordering due to rapid exchange at the interface. By altering the assembly process, highly ordered, hexagonal arrays of TYMV were obtained at planar O/W interfaces. The pH, ionic strength, and viscosity of the solution played a crucial role in enhancing the lateral ordering of TYMV assembled at the planar O/W interface. This interfacial ordering of TYMV particles was further stabilized by introduction of a positively charged dehydroabietyl amine (DHAA) in the organic phase which held the assembly together by electrostatic interactions. The long-range array formation was observed using TEM and SFM. The results presented here illustrate that the interfacial assembly at the O/W interface is a versatile approach to achieve highly stable self-assembled structures.
Asunto(s)
Nanopartículas/química , Tymovirus/química , Ensamble de Virus , Emulsiones , Microscopía Electrónica de Transmisión , Nanopartículas/ultraestructura , Aceites/química , Tymovirus/ultraestructura , Agua/químicaRESUMEN
A pigment array has been constructed within a paracrystalline amyloid nanotube and Förster energy transfer along the nanotube surface has been demonstrated to self-assembled acceptor dyes.
Asunto(s)
Péptidos beta-Amiloides/química , Luz , Secuencia de Aminoácidos , Transferencia Resonante de Energía de Fluorescencia , Microscopía Electrónica de Transmisión , Nanotubos , Dispersión de Radiación , Espectrometría de FluorescenciaRESUMEN
Cytosine nucleobases were successfully incorporated into the side chain of the self-assembling amyloid peptide fragment HHQALVFFA to give ccAQLVFFA. At a pH range of 3-4, where cytosine is expected to be partially protonated, small-angle X-ray scattering analyses revealed the nucleobase peptide assembles to be well-defined nanotubes with an outer diameter of 24.8 nm and wall thicknesses of 3.3 nm. FT-IR and X-ray diffraction confirmed beta-sheet-rich assembly with the characteristic cross-beta architecture of amyloid. The beta-sheet registry, determined by measuring (13)CO-(13)CO backbone distances with solid-state NMR and linear dichroism, placed the cytosine bases roughly perpendicular to the nanotube axis, resulting in a model where the complementary interactions between the cytosine bases increases beta-sheet stacking to give the nanotube architecture. These scaffolds then extend the templates used to encode biological information beyond the nucleic acid duplexes and into covalent networks whose self-assembly is still defined by a precise complementarity of the side-chain registry.
Asunto(s)
Amiloide/química , Nanotubos/química , Amiloide/ultraestructura , Simulación por Computador , Enlace de Hidrógeno , Microscopía Electrónica de Transmisión , Modelos Moleculares , Conformación Molecular , Nanotubos/ultraestructura , Análisis EspectralRESUMEN
Amino acid cross-strand pairing interactions along a beta-sheet surface have been implicated in protein beta-structural assembly and stability, yet the relative contributions have been difficult to evaluate directly. Here we develop the central core sequence of the Abeta peptide associated with Alzheimer's disease, Abeta(16-22), as an experimental system for evaluating these interactions. The peptide allows for internal comparisons between electrostatic and steric interactions within the beta-sheet and an evaluation of these cross-strand pair contributions to beta-sheet registry. A morphological transition from fibers to hollow nanotubes arises from changes in beta-sheet surface complementarity and provides a convenient indicator of the beta-strand strand registry. The intrinsic beta-sequence and pair correlations are critical to regulate secondary assembly. These studies provide evidence for a critical desolvation step that is not present in most models of the nucleation-dependent pathway for amyloid assembly.
Asunto(s)
Péptidos beta-Amiloides/química , Péptidos beta-Amiloides/metabolismo , Amiloide/química , Amiloide/metabolismo , Amiloide/ultraestructura , Péptidos beta-Amiloides/síntesis química , Péptidos beta-Amiloides/ultraestructura , Biología Computacional , Humanos , Modelos Moleculares , Nanotubos/química , Nanotubos/ultraestructura , Pliegue de Proteína , Procesamiento Proteico-Postraduccional , Estructura Secundaria de Proteína/fisiología , Dispersión de Radiación , Propiedades de Superficie , Rayos XRESUMEN
Amyloids are self-assembled protein architectures implicated in dozens of misfolding diseases. These assemblies appear to emerge through a "selection" of specific conformational "strains" which nucleate and propagate within cells to cause disease. The short Abeta(16-22) peptide, which includes the central core of the Alzheimer's disease Abeta peptide, generates an amyloid fiber which is morphologically indistinguishable from the full-length peptide fiber, but it can also form other morphologies under distinct conditions. Here we combine spectroscopic and microscopy analyses that reveal the subtle atomic-level differences that dictate assembly of two conformationally pure Abeta(16-22) assemblies, amyloid fibers and nanotubes, and define the minimal repeating unit for each assembly.
Asunto(s)
Péptidos beta-Amiloides/química , Amiloide/química , Fragmentos de Péptidos/química , Enlace de Hidrógeno , Microscopía Electrónica de Transmisión , Modelos Moleculares , Nanotubos/química , Resonancia Magnética Nuclear Biomolecular/métodos , Estructura Secundaria de Proteína , Espectrofotometría Infrarroja , Termodinámica , Difracción de Rayos XRESUMEN
Non-classical behaviour, brought about by a confinement that imposes spatial constraints on molecules, is opening avenues to novel applications. For example, carbon nanotubes, which show rapid and selective transport of small molecules across the nanotubes, have significant potential as biological or chemical separation materials for organic solvents or gaseous molecules. With polymers, when the dimensions of a confining volume are much less than the radius of gyration, a quantitative understanding of perturbations to chain dynamics due to geometric constraints remains a challenge and, with the development of nanofabrication processes, the dynamics of confined polymers have significant technological implications. Here, we describe a weak molecular-weight-dependent mobility of polymers confined within nanoscopic cylindrical pores having diameters smaller than the dimension of the chains in the bulk. On the basis of the chain configuration along the pore axis, the measured mobility of polymers in the confined geometry is much higher than the mobility of the unconfined chain. With the emergence of nanofabrication processes based on polymer flow, the unexpected enhancement in flow and reduction in intermolecular entanglements are of significant importance in the design and execution of processing strategies.
RESUMEN
The effects of protein entrapment on the structure and phase behavior of periodically curved lipid mesostructures have been examined by synchrotron small-angle X-ray diffraction and FT-IR spectroscopy. The study was directed towards a better understanding of the effect of confinement in a lipid environment on the stability and unfolding behavior of alpha-chymotrypsin, and, vice versa, the effect of the entrapped protein on the lipid's mesophase structure and temperature- and pressure-dependent phase behavior. We compare the interaction of protein molecules of two different sizes (cytochrome c, 12.4 kDa, and alpha-chymotrypsin, 25.8 kDa) with the cubic Ia3d phase of monoolein (MO), which forms spontaneously in water. The cubic structure changes significantly when cyt c is incorporated: above a protein concentration of 0.2 wt.%, the interaction between the positively charged protein and the lipid headgroups leads to an increase in interfacial curvature which promotes the formation of a new micellar cubic phase, presumably of crystallographic space group P4(3)32, which the lipid system does not form on its own. The larger alpha-chymotrypsin leads to a different scenario. On the basis of an examination of the calculated geometric parameters and water volume fractions, it is concluded that the alpha-chymotrypsin molecules cannot be located exclusively in the water channels of the cubic Ia3d or P4(3)32 phases, but rather form new, less ordered (presumably cubic Pn3m) structures. The new structure disappears above the unfolding temperature of chymotrypsin and exhibits a pressure stability, which-- in contrast to cyt c in MO-- decreases with increasing chymotrypsin concentration in the system. While the secondary structure of cyt c remains unaffected in the confining lipid environment, the structure of alpha-chymotrypsin gets destabilized slightly, and the protein tends to aggregate even at relatively low concentrations.
Asunto(s)
Quimotripsina/química , Glicéridos/química , Acuaporinas , Citocromos c/química , Lípidos/química , Estructura Molecular , Presión , Estructura Secundaria de Proteína , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
Aqueous dispersions of mixed egg yolk phosphatidylcholine (PC) and poly(ethylene glycol) (PEG) modified distearoyl phosphatidylethanolamine (DSPE) were investigated with the purpose of determining shape, size, and conformation of the formed mixed micelles. The samples were prepared at a range of DSPEPEG to PC molar ratios ([DSPEPEG/PC] from 100:0 to 30:70) and with, respectively, DSPEPEG2000 and DSPEPEG5000, where 2000 and 5000 refer to the molar masses of the PEG chains. Particle shape and internal structure were studied using small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS). The contrast of the micelles is different for X-rays and neutrons, and by combining SANS and SAXS, complementary information about the micelle structure was obtained. The detailed structure of the micelles was determined in a self-consistent way by fitting a model for the micelles to SANS and SAXS data simultaneously. In general, a model for the micelles with a hydrophobic core, surrounded by a dense hydrophilic layer that is again surrounded by a corona of PEG chains in the form of Gaussian random coils attached to the outer surface, is in good agreement with the scattering data. At high DSPEPEG contents, nearly spherical micelles are formed. As the PC content increases the micelles elongate, and at a DSPEPEG/PC ratio of 30:70, rodlike micelles longer than 1000 angstroms are formed. We demonstrate that by mixing DSPEPEG and PC a considerable latitude in controlling the particle shape is obtained. Our results indicate that the PEG chains in the corona are in a relatively unperturbed Gaussian random coil conformation even though the chains are far above the coil-coil overlap concentration and, therefore, interpenetrating. This observation in combination with the observed growth behavior questions that the "mushroom-brush"transition is the single dominating factor for determining the particle shape as assumed in previous theoretical work (Hristova, K.; Needham, D. Macromolecules 1995, 28, 991-1002).
Asunto(s)
Fosfatidilcolinas/química , Fosfatidiletanolaminas/química , Fosfolípidos/química , Polietilenglicoles/química , Agua/química , Interacciones Hidrofóbicas e Hidrofílicas , Matemática , Micelas , Modelos Químicos , Conformación Molecular , Neutrones , Tamaño de la Partícula , Dispersión de Radiación , Solubilidad , Rayos XRESUMEN
We investigated the effect of incorporation of a small aqueous peripheral membrane protein (cyt c) into the three-dimensional periodic nanochannel structures formed by the lipid monoolein (MO) on its rich phase behavior as a function of temperature, pressure, and protein concentration using synchrotron X-ray small-angle diffraction. By simultaneous use of the pressure-jump relaxation technique and time-resolved synchrotron X-ray diffraction, we also studied the kinetics of various lipid mesophase transformations of the system for understanding the mechanistic pathways of their formation influenced by the protein-lipid interactions. Cyt c incorporated into the bicontinuous cubic phase Ia3d of MO has a significant effect on the lipid structure and the pressure stability of the system already at low protein concentrations. Concentrations higher than 0.2 wt % of cyt c led to an increase in interfacial curvature due to interaction of the protein with the lipid headgroups. This promotes the formation of a new, probably partially micellar cubic phase of crystallographic space group P4(3)32. Upon pressurization, the P4(3)32 phase undergoes a phase transition to a cubic Pn3m phase with smaller partial specific volume. Increase in protein concentration increases the pressure stability of the P4(3)32 phase. The formation of this phase from the cubic phase Pn3m is a slow process taking many seconds and having a time lag in the beginning. It seems to occur as a two-state process without ordered intermediate states. At temperatures above 60 degrees C, the P4(3)32 phase is unable to accommodate the unfolded protein and transforms to a bicontinuous cubic Ia3d phase. Time-resolved small-angle X-ray scattering studies show that the L(alpha) --> Ia3d transition in pure MO dispersions under limited hydration conditions occurs within a time interval of 1 s at 35 degrees C preceded by a lag phase of 1.5 s. The Ia3d cubic phase initially forms with a much larger lattice constant due to hydration and experiences an initially lower curvature that relaxes within about 1 s. Interestingly, no other cubic phases are involved as intermediates in the transition, i.e., the gyroid cubic phase is able to form directly from the L(alpha) phase. The mechanism behind the L(alpha) --> Ia3d transition in pure MO dispersions has been discussed within the framework of recent stalk models for membrane fusion. In the presence of cyt c, the L(alpha) --> Ia3d transition is much slower. The rather long relaxation times of the order of seconds are probably due to a kinetic trapping of the system and limitation by the transport and redistribution of water and lipid in the evolving new lipid phases. We also studied the transition from the pure lamellar L(alpha) phase to the Ia3d-P4(3)32 two phase region and observed a rather complex transition behavior with transient lamellar and cubic intermediate states.
Asunto(s)
Citocromos c/química , Glicéridos/química , Membrana Dobles de Lípidos/química , Cristalización , Cinética , Transición de Fase , Temperatura , Agua/química , Difracción de Rayos X/métodosRESUMEN
Quasi-one-dimensional water encapsulated inside single-walled carbon nanotubes, here referred to as nanotube water, was studied by neutron scattering. The results reveal an anomalously soft dynamics characterized by pliable hydrogen bonds, anharmonic intermolecular potentials, and large-amplitude motions in nanotube water. Molecular dynamics simulations consistently describe the observed phenomena and propose the structure of nanotube water, which comprises a square-ice sheet wrapped into a cylinder inside the carbon nanotube and interior molecules in a chainlike configuration.
Asunto(s)
Nanotubos de Carbono/química , Agua/química , Simulación por Computador , Modelos Químicos , Neutrones , Dispersión de RadiaciónRESUMEN
We used SpalphaI-1-156 peptide, a well-characterized model peptide of the alphaN-terminal region of erythrocyte spectrin, and SpalphaII-1-149, an alphaII brain spectrin model peptide similar in sequence to SpalphaI-1-156, to study their association affinities with a betaI-spectrin peptide, SpbetaI-1898-2083, by isothermal titration calorimetry. We also determined their conformational flexibilities in solution by small-angle X-ray scattering (SAXS) methods. These two peptides exhibit sequence homology and could be expected to exhibit similar association affinities with beta-spectrin. However, our studies show that the affinity of SpalphaII-1-149 with SpbetaI-1898-2083 is much higher than that of SpalphaI-1-156. Our SAXS findings also indicate a significantly more extended conformation for SpalphaII-1-149 than for SpalphaI-1-156. The radius of gyration values obtained by two different analyses of SAXS data and by molecular modeling all show a value of about 25 A for SpalphaI-1-156 and of about 30 A for SpalphaII-1-149, despite the fact that SpalphaI-1-156 has seven amino acid residues more than SpalphaII-1-149. For SpalphaI-1-156, the SAXS results are consistent with a flexible junction between helix C' and the triple helical bundle that allows multiple orientations between these two structural elements, in good agreement with our published NMR analysis. The SAXS findings for SpalphaII-1-149 support the hypothesis that this junction region is rigid (and probably helical) for alphaII brain spectrin. The nature of the junction region, from one extreme as a random coil (conformationally mobile) segment in alphaI to another extreme as a rigid segment in alphaII, determines the orientation of helix C' relative to the first structural domain. We suggest that this particular junction region in alpha-spectrin plays a major role in modulating its association affinity with beta-spectrins, and thus regulates spectrin tetramer levels. We also note that these are the first conformational studies of brain spectrin.
Asunto(s)
Membrana Eritrocítica/química , Fragmentos de Péptidos/química , Espectrina/química , Secuencia de Aminoácidos , Calorimetría , Humanos , Modelos Moleculares , Datos de Secuencia Molecular , Conformación Proteica , Isoformas de Proteínas/química , Estructura Terciaria de Proteína , Proteínas Recombinantes/química , Dispersión de Radiación , Alineación de Secuencia , Termodinámica , Rayos XRESUMEN
Fundamental questions about the relative arrangement of the beta-sheet arrays within amyloid fibrils remain central to both its structure and the mechanism of self-assembly. Recent computational analyses suggested that sheet-to-sheet lamination was limited by the length of the strand. On the basis of this hypothesis, a short seven-residue segment of the Alzheimer's disease-related Abeta peptide, Abeta(16-22), was allowed to self-assemble under conditions that maintained the basic amphiphilic character of Abeta. Indeed, the number increased over 20-fold to 130 laminates, giving homogeneous bilayer structures that supercoil into long robust nanotubes. Small-angle neutron scattering and X-ray scattering defined the outer and inner radii of the nanotubes in solution to contain a 44-nm inner cavity with 4-nm-thick walls. Atomic force microscopy and transmission electron microscopy images further confirmed these homogeneous arrays of solvent-filled nanotubes arising from a flat rectangular bilayer, 130 nm wide x 4 nm thick, with each bilayer leaflet composed of laminated beta-sheets. The corresponding backbone H-bonds are along the long axis, and beta-sheet lamination defines the 130-nm bilayer width. This bilayer coils to give the final nanotube. Such robust and persistent self-assembling nanotubes with positively charged surfaces of very different inner and outer curvature now offer a unique, robust, and easily accessible scaffold for nanotechnology.
Asunto(s)
Amiloide/química , Nanotecnología/métodos , Péptidos beta-Amiloides/química , Dicroismo Circular , Microscopía de Fuerza Atómica , Neutrones , Fragmentos de Péptidos/química , Dispersión de Radiación , Rayos XRESUMEN
Small-angle X-ray scattering was used to measure the effects of chemical bleaching on the size and morphology of tyrosine-derived synthetic melanin dispersed in aqueous media. The average size as measured by the radius of gyration of the melanin particles in solution, at neutral to mildly basic pH, decreases from 16.5 to 12.5 angstroms with increased bleaching. The melanin particles exhibit scattering characteristic of sheet-like structures with a thickness of approximately 11 angstroms at all but the highest levels of bleaching. The scattering data are well described by the form factor for scattering from a pancake-like circular cylinder. These data are consistent with the hypothesis that unbleached melanin, at neutral to mildly basic pH, is a planar aggregate of 6- to 10-nm-sized melanin protomolecules, hydrogen bonded through their quinone and phenolic perimeters. The observed decrease in melanin particle size with increased bleaching is interpreted as evidence for deaggregation, most probably the result of oxidative disruption of hydrogen bonds and an increase in the number of charged, carboxylic acid groups, whereby the melanin aggregates disassociate into units composed of decreasing numbers of protomolecules.
Asunto(s)
Melaninas/química , Estructura Molecular , Dispersión de RadiaciónRESUMEN
The role of Zn2+ in pre-organizing Abeta(10-21) amyloid formation is shown to preferentially alter the relative rate of fibril nucleation and to have little influence on fibril propagation. Fibril morphology, as determined by small angle neutron scattering (SANS) and transmission electron microscopy (TEM), was unchanged in the presence and absence of Zn2+ in Abeta(10-21), as well as in a series of site-specifically altered variants. The metal-independence of the Abeta(10-21)H13Q peptide suggested that the increase in nucleation rate in Abeta(10-21) is due to Zn2+-mediated inter-sheet interactions, involving both histidine 13 and histidine 14.
Asunto(s)
Amiloide/biosíntesis , Amiloide/química , Zinc/química , Zinc/metabolismo , Sitios de Unión , Cinética , Microscopía Electrónica , Modelos Moleculares , Fragmentos de Péptidos/químicaRESUMEN
Rosette nanotubes are a new class of organic nanotubes obtained through the hierarchical self-assembly of low molecular weight synthetic modules in water. Here we demonstrate that these materials can serve as scaffolds for the supramolecular synthesis of multichannel nanotubular architectures and report on the discovery of their entropy-driven self-assembly process.