RESUMEN
The development and application of an automated 3D greedy heuristic (GH) optimization algorithm utilizing the adjoint sensitivity fields for treatment planning to assess the advantage of directional interstitial prostate brachytherapy is presented. Directional and isotropic dose kernels generated using Monte Carlo simulations based on Best Industries model 2301 I-125 source are utilized for treatment planning. The newly developed GH algorithm is employed for optimization of the treatment plans for seven interstitial prostate brachytherapy cases using mixed sources (directional brachytherapy) and using only isotropic sources (conventional brachytherapy). All treatment plans resulted in V100 > 98% and D90 > 45 Gy for the target prostate region. For the urethra region, the D10(Ur), D90(Ur) and V150(Ur) and for the rectum region the V100cc, D2cc, D90(Re) and V90(Re) all are reduced significantly when mixed sources brachytherapy is used employing directional sources. The simulations demonstrated that the use of directional sources in the low dose-rate (LDR) brachytherapy of the prostate clearly benefits in sparing the urethra and the rectum sensitive structures from overdose. The time taken for a conventional treatment plan is less than three seconds, while the time taken for a mixed source treatment plan is less than nine seconds, as tested on an Intel Core2 Duo 2.2 GHz processor with 1GB RAM. The new 3D GH algorithm is successful in generating a feasible LDR brachytherapy treatment planning solution with an extra degree of freedom, i.e. directionality in very little time.
Asunto(s)
Braquiterapia/métodos , Dosis de Radiación , Planificación de la Radioterapia Asistida por Computador/métodos , Algoritmos , Humanos , Radioisótopos de Yodo/uso terapéutico , Masculino , Neoplasias de la Próstata/radioterapia , Dosificación RadioterapéuticaRESUMEN
PURPOSE: Standard brachytherapy sources emit radiation in a non-preferential direction away from the source. Though treatment outcomes are good, this can lead to late skin and subcutaneous toxicities in sensitive structures. Proposed low dose rate directional sources for interstitial brachytherapy, showed to have an improvement in the dose uniformity within the subcutaneous volume, reduction in skin dose, and reduction in volume receiving dose outside the target. The objective of this work is to demonstrate the potential use of a new Pd-103 directional seed for application in high dose rate brachytherapy treatments. METHODS: Monte Carlo simulations were performed using the MCNP5 F6 energy deposition tallies as well as the MCNP5 F4 flux density tallies placed around a partially shielded Pd-103 source at angles(deg): 0, 45, 90, 135, 180, 225, 270, 315 as well as radial distances (cm): 0.5, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 9, 10. The source that modeled was a Pd-103 core using TG-43U recommended nuclear data, with a diameter = 1.4 mm, active length = 1.0 cm. In addition osmium metal with .03 mm thickness was used as shielding material to cover half of the cylindrical surface of the Pd-103 volume. The seed was encapsulated using .05 mm thick titanium. RESULTS: MCNP models show that the dose to the radial distances, corresponding to the osmium shielded side, are dramatically reduced to less than 4% of the total dose. CONCLUSIONS: The potential of a Pd-103 directional brachytherapy source has been studied. The results show that a seed with a partially shielded volume can be exploited to reduce side effects associated with radiation therapy to sensitive structures surrounding target volumes.
RESUMEN
90Y-labeled SIR-Spheres are currently used to treat patients with hepatic metastases secondary to colorectal adenocarcinoma. In general, the prescribed activity is based on empirical data collected during clinical trials. The activity of the source vial is labeled by the manufacturer as 3.0 GBq +/- 10% and is not independently verified by the end user. This technical note shows that the results of a nondestructive spectroscopic assay of a SIR-Spheres sample was 26% higher than the activity stated by the manufacturer. This difference should not impact the current empirical prescription method but may be problematic for patient-specific dosimetry applications, such as image-based dosimetry.
Asunto(s)
Radiometría/métodos , Radiometría/normas , Análisis Espectral/métodos , Radioisótopos de Itrio/análisis , Calibración , Microesferas , Dosis de Radiación , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Estados UnidosRESUMEN
(90)Y-labeled resin microspheres (SIR-Spheres) are currently used to treat patients with primary and metastatic solid liver tumors. This treatment is typically palliative since patients have exhausted all other standard treatment options. Improving the quality of life and extending patient survival are typical benchmarks for tracking patient response. However, the current method for predicting microsphere biodistributions with (99m)Tc-labeled macroaggregated albumin (MAA) does not correlate well with patient response. This work presents the development of a new (18)F-labeled resin microsphere to serve as a surrogate for the treatment microsphere and to employ the superior resolution and sensitivity of positron emission tomography (PET). The (18)F microsphere biodistributions were determined in a rabbit using PET imaging and histological review. The PET-based uptake ratio was shown to agree with the histological findings to better than 3%. In addition, the radiolabeling process was shown to be rapid, efficient and relatively stable in vivo.
Asunto(s)
Carcinoma Hepatocelular/diagnóstico por imagen , Fluorodesoxiglucosa F18/farmacocinética , Neoplasias Hepáticas/diagnóstico por imagen , Microesferas , Tomografía de Emisión de Positrones/métodos , Animales , Carcinoma Hepatocelular/patología , Embolización Terapéutica/métodos , Fluorodesoxiglucosa F18/uso terapéutico , Humanos , Neoplasias Hepáticas/patología , Conejos , Radiofármacos/farmacocinética , Radiofármacos/uso terapéutico , Dosificación Radioterapéutica , Ratas , Ratas Sprague-Dawley , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Radioisótopos de Itrio/farmacocinética , Radioisótopos de Itrio/uso terapéuticoRESUMEN
A robot designed for prostate brachytherapy implantations has the potential to greatly improve treatment success. Much of the research in robotic surgery focuses on measuring accuracy. However, there exist many factors that must be optimized before an analysis of needle placement accuracy can be determined. Some of these parameters include choice of the needle type, insertion velocity, usefulness of the rotating needle and rotation speed. These parameters may affect the force at which the needle interacts with the tissue. A reduction in force has been shown to decrease the compression of the prostate and potentially increase the accuracy of seed position. Rotating the needle as it is inserted may reduce frictional forces while increasing accuracy. However, needle rotations are considered to increase tissue damage due to the drilling nature of the insertion. We explore many of the factors involved in optimizing a brachytherapy robot, and the potential effects each parameter may have on the procedure. We also investigate the interaction of rotating needles in gel and suggest the rotate-cannula-only method of conical needle insertion to minimize any tissue damage while still maintaining the benefits of reduced force and increased accuracy.
Asunto(s)
Braquiterapia/instrumentación , Agujas , Implantación de Prótesis/instrumentación , Implantación de Prótesis/métodos , Robótica/instrumentación , Terapia Asistida por Computador/instrumentación , Terapia Asistida por Computador/métodos , Braquiterapia/métodos , Diseño de Equipo , Análisis de Falla de Equipo , Humanos , Robótica/métodos , RotaciónRESUMEN
The goals of interstitial implant brachytherapy include delivery of the target dose in a uniform manner while sparing sensitive structures, and minimizing the number of needles and sources. We investigated the use of a multi-species source arrangement (192Ir with 125I) for treatment in interstitial prostate brachytherapy. The algorithm utilizes an "adjoint ratio," which provides a means of ranking source positions and is the criterion for the Greedy Heuristic optimization. Three cases were compared, each using 0.4 mCi 125I seeds: case I is the base case using 125I alone, case II uses 0.12 mCi 192Ir seeds mixed with 125I, and case III uses 0.25 mCi 192Ir mixed with 125I. Both multi-species cases result in lower exposure of the urethra and central prostate region. Compared with the base case, the exposure to the rectum and normal tissue increases by a significant amount for case III as compared with the increase in case II, signifying the effect of slower dose falloff rate of higher energy gammas of 192Ir in the tissue. The number of seeds and needles decreases in both multi-species cases, with case III requiring fewer seeds and needles than case II. Further, the effect of 192Ir on uniformity was investigated using the 0.12 mCi 192Ir seeds in multi-species implants. An increase in uniformity was observed with an increase in the number of 0.12 mCi 1921r seeds implanted. The effects of prostate size on the evaluation parameters for multi-species implants were investigated using 0.12 mCi 192Ir and 0.4 mCi 125I, and an acceptable treatment plan with increased uniformity was obtained.
Asunto(s)
Algoritmos , Radioisótopos de Yodo/uso terapéutico , Radioisótopos de Iridio/uso terapéutico , Modelos Biológicos , Neoplasias de la Próstata/radioterapia , Radiometría/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Terapia Combinada , Simulación por Computador , Humanos , Masculino , Radiofármacos/uso terapéutico , Dosificación RadioterapéuticaRESUMEN
(90)Y is utilized as a therapeutic radioisotope in radiolabeled monoclonal antibodies and in microspheres for targeted radiation therapy of the liver. Currently, the widely used dose calibrator assay of (90)Y can have uncertainties exceeding +/-10%. A non-destructive assay using spectroscopy is possible by reducing the currently published uncertainty (+/-12%) in the internal pair production branching ratio for the 0(+)-0(+) transition of (90)Zr. A high-purity germanium detector was used to determine the branching ratio to be (31.86+/-0.47) x 10(-6).
Asunto(s)
Monitoreo de Radiación/métodos , Radioisótopos de Estroncio/análisis , Radioisótopos de Itrio/análisis , CalibraciónRESUMEN
PURPOSE: This report compares the Nucletron NPS and PLATO planning system for patients treated for cervix cancer. MATERIALS AND METHODS: This study compares calculations generated using the older NPS (version 11.43) planning system and the more recent PLATO (version 14.1) system for two cases: 1) a single dwell position and 2) an actual patient application using a tandem and ovoid. RESULTS: For one dwell position: for NPS planning the dose for points along the source axis forward of the cable was 9.85% more than for symmetrically placed points in the cable direction. For PLATO, the same test gave rise to a difference of 10.2%. Comparing the two systems, NPS calculated doses for points in the forward direction 14% greater than those calculated by PLATO. The entry of points using the digitizer accounted for less than 1% of any difference. For the patient case: the dose difference between NPS and PLATO planning for all patient reference points entered from films ranged from 1 to 4%. The difference in dose between optimized and nonoptimized planning was approximately 0.5% for prescription points (points A), while for the bladder and rectum the differences were 6% and 20%, respectively with NPS, and with PLATO, 8% and 22%, respectively. CONCLUSION: This study highlighted the effects of the differences in the calculational algorithm between the older and newer planning systems from Nucletron. While the differences were minimal on the perpendicular bisector of the source, along the axis they become considerable. In a practical gynecological case, these differences mostly affect the dose to the rectum, since that organ receives the greatest proportion of its dose from rays near the same axis. Overall, the PLATO system plan required about 2.5% less integrated reference air kerma than the NPS plan for the same dose to point A. For either planning system, optimization is crucial in decreasing dose to bladder and rectal points.
Asunto(s)
Braquiterapia/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Neoplasias del Cuello Uterino/radioterapia , Algoritmos , Femenino , Humanos , Dosis de RadiaciónRESUMEN
Intravascular brachytherapy requires that the dose be specified within millimeters of the source. High dose gradients near brachytherapy sources require that the source-detector distance be accurately known for dosimetry purposes. Solid phantoms can be designed to accommodate these stringent requirements. This study reports dosimeter readings from 90Sr-90Y sources measured in water, A150, polystyrene and in an epoxy-based water-equivalent plastic. Measurements showed that while A150 and the epoxy-based plastic agreed well with water when the surface of the source contacted the detector housing, the relative response in the phantoms decreased with increasing depth in phantom, falling to approximately 0.55 those of water at a depth of 5 mm. Readings in polystyrene were within 4% of those in water between 1 and 2 mm depth. However, while polystyrene followed water more closely than the other two materials, at greater depths the relative response in polystyrene to water varied from 0.65 to 1.34. When the density of the materials is accounted for, the relative response in A150 is nearly constant with increasing areal density. Furthermore, the response in A150 shows the closest agreement with that in water of any of the solid materials for higher areal densities. For values below 0.3 g/cm2, polystyrene shows the closest agreement with water.
Asunto(s)
Braquiterapia/métodos , Fantasmas de Imagen , Radioisótopos de Estroncio/uso terapéutico , Radioisótopos de Itrio/uso terapéutico , Angioplastia , Fenómenos Biofísicos , Biofisica , Braquiterapia/estadística & datos numéricos , Reestenosis Coronaria/prevención & control , Humanos , Plásticos , Poliestirenos , Radiometría/métodos , Radiometría/estadística & datos numéricos , Planificación de la Radioterapia Asistida por Computador , AguaRESUMEN
Materials that simultaneously mimic soft tissue in vivo for magnetic resonance imaging (MRI), ultrasound (US), and computed tomography (CT) for use in a prostate phantom have been developed. Prostate and muscle mimicking materials contain water, agarose, lipid particles, protein, Cu++, EDTA, glass beads, and thimerosal (preservative). Fat was mimicked with safflower oil suffusing a random mesh (network) of polyurethane. Phantom material properties were measured at 22 degrees C. (22 degrees C is a typical room temperature at which phantoms are used.) The values of material properties should match, as well as possible, the values for tissues at body temperature, 37 degrees C. For MRI, the primary properties of interest are T1 and T2 relaxations times, for US they are the attenuation coefficient, propagation speed, and backscatter, and for CT, the x-ray attenuation. Considering the large number of parameters to be mimicked, rather good agreement was found with actual tissue values obtained from the literature. Using published values for prostate parenchyma, T1 and T2 at 37 degrees C and 40 MHz are estimated to be about 1,100 and 98 ms, respectively. The CT number for in vivo prostate is estimated to be 45 HU (Hounsfield units). The prostate mimicking material has a T1 of 937 ms and a T2 of 88 ms at 22 degrees C and 40 MHz; the propagation speed and attenuation coefficient slope are 1,540 m/s and 0.36 dB/cm/MHz, respectively, and the CT number of tissue mimicking prostate is 43 HU. Tissue mimicking (TM) muscle differs from TM prostate in the amount of dry weight agarose, Cu++, EDTA, and the quality and quantity of glass beads. The 18 microm glass beads used in TM muscle increase US backscatter and US attenuation; the presence of the beads also has some effect on T1 but no effect on T2. The composition of tissue-mimicking materials developed is such that different versions can be placed in direct contact with one another in a phantom with no long term change in US, MRI, or CT properties. Thus, anthropomorphic phantoms can be constructed.
Asunto(s)
Fantasmas de Imagen , Tejido Adiposo/diagnóstico por imagen , Humanos , Imagen por Resonancia Magnética/métodos , Masculino , Músculos/diagnóstico por imagen , Próstata/diagnóstico por imagen , Temperatura , Factores de Tiempo , Tomografía Computarizada por Rayos X/métodosRESUMEN
Conventional treatment planning for interstitial prostate brachytherapy is generally a 'trial and error' process in which improved treatment plans are generated by iteratively changing, via expert judgement, the configuration of sources within the target volume in order to achieve a satisfactory dose distribution. We have utilized linear mixed-integer programming (MIP) and the branch-and-bound method, a deterministic search algorithm, to generate treatment plans. The rapidity of dose falloff from an interstitial radioactive source requires fine sampling of the space in which dose is calculated. This leads to a large and complex model that is difficult to solve as a single 3D problem. We have therefore implemented an iterative sequential approach that optimizes pseudo-independent 2D slices to achieve a fine-grid 3D solution. Using our approach, treatment plans can be generated in 20-45 min on a 200 MHz processor. A comparison of our approach with the manual 'trial and error' approach shows that the optimized plans are generally superior. The dose to the urethra and rectum is usually maintained below harmful levels without sacrificing target coverage. In the event that the dose to the urethra is undesirably high, we present a refined optimization approach that lowers urethra dose without significant loss in target coverage. An analysis of the sensitivity of the optimized plans to seed misplacement during the implantation process is also presented that indicates remarkable stability of the dose distribution in comparison with manual treatment plans.
Asunto(s)
Braquiterapia/métodos , Neoplasias de la Próstata/radioterapia , Planificación de la Radioterapia Asistida por Computador/métodos , Algoritmos , Fenómenos Biofísicos , Biofisica , Humanos , Masculino , Modelos Teóricos , Planificación de la Radioterapia Asistida por Computador/estadística & datos numéricos , Sensibilidad y EspecificidadRESUMEN
Two patients developed skin ulcers secondary to high doses of diagnostic-energy x rays received during localization procedures as part of brachytherapy treatments. Both were morbidly obese and diabetic. The obesity led to the delivery of estimated skin doses of 83 Gy in one case and 29 Gy in the other in attempts to produce readable images on localization radiographs. This report discusses the factors leading to the injuries, the progression of the injuries over time, and the variables involved in the localization procedures with the aim of preventing future mishaps. The greatest contribution to the large skin dose was the need, with the equipment available, to use multiple exposures to produce a single film, because of the effect of the resultant reciprocity failure.
Asunto(s)
Braquiterapia/efectos adversos , Traumatismos por Radiación , Piel/efectos de la radiación , Úlcera/etiología , Neoplasias Endometriales/radioterapia , Femenino , Humanos , Obesidad , Piel/lesiones , Piel/patología , Úlcera/patología , Rayos XRESUMEN
PURPOSE: This report presents guidelines for using high-dose-rate (HDR) brachytherapy in the management of patients with cervical cancer, taking into consideration the current availability of resources in most institutions. METHODS: Members of the American Brachytherapy Society (ABS) with expertise in HDR brachytherapy for cervical cancer performed a literature review, supplemented their clinical experience to formulate guidelines for HDR brachytherapy of cervical cancer. RESULTS: The ABS strongly recommends that definitive irradiation for cervical carcinoma must include brachytherapy as a component. Each institution should follow a consistent treatment policy when performing HDR brachytherapy, including complete documentation of treatment parameters and correlation with clinical outcome, such as pelvic control, survival, and complications. The goals are to treat Point A to at least a total low-dose-rate (LDR) equivalent of 80-85 Gy for early stage disease and 85-90 Gy for advanced stage. The pelvic sidewall dose recommendations are 50-55 Gy for early lesions and 55-65 Gy for advanced ones. The relative doses given by external beam radiation therapy (EBRT) vs. brachytherapy depend upon the initial volume of disease, the ability to displace the bladder and rectum, the degree of tumor regression during pelvic irradiation, and institutional preference. As with LDR brachytherapy, every attempt should be made to keep the bladder and rectal doses below 80 Gy and 75 Gy LDR equivalent doses, respectively. Interstitial brachytherapy should be considered for patients with disease that cannot be optimally encompassed by intracavitary brachytherapy. While recognizing that many efficacious HDR fractionation schedules exist, some suggested dose and fractionation schemes for combining the EBRT with HDR brachytherapy for each stage of disease are presented. These recommendations are intended only as guidelines, and the suggested fractionation schemes have not been thoroughly tested. The responsibility for the medical decisions ultimately rests with the treating radiation oncologist. CONCLUSION: Guidelines are established for HDR brachytherapy for cervical cancer. Practitioners and cooperative groups are encouraged to use these guidelines to formulate their treatment and dose-reporting policies. These guidelines will be modified, as image-based treatment becomes more widely available.
Asunto(s)
Braquiterapia/normas , Neoplasias del Cuello Uterino/radioterapia , Antineoplásicos/uso terapéutico , Braquiterapia/métodos , Cisplatino/uso terapéutico , Fraccionamiento de la Dosis de Radiación , Femenino , Humanos , Estadificación de Neoplasias , Garantía de la Calidad de Atención de Salud , Recto , Sociedades Médicas , Estados Unidos , Vejiga Urinaria , Neoplasias del Cuello Uterino/tratamiento farmacológico , Neoplasias del Cuello Uterino/patologíaRESUMEN
Assessing the strength of individual seed-type sources in ribbon assembles remains a challenge in brachytherapy quality assurance. Geometries to measure a single source in the ribbon usually fail because of low signals if using very thick shielding to block the radiation from the other sources, or contributions from all the other sources if they are not shielded well. A normal well-type chamber with partial lead shielding forming a small slot provides a differential response along the chamber axis that, through a deconvolution/simultaneous-equations technique, sorts the contributions from each source, allowing the derivation of each source's strength.
Asunto(s)
Braquiterapia/instrumentación , Radioisótopos de Iridio/uso terapéutico , Dosificación Radioterapéutica/normas , Braquiterapia/normas , Calibración , Modelos Teóricos , Garantía de la Calidad de Atención de Salud , Protección Radiológica , Reproducibilidad de los ResultadosRESUMEN
Head-scatter factors, Sh, also referred to as output factors, are measured in-air with an ion chamber and a semiconductor diode fitted with cylindrical build-up caps and columnar miniphantoms fabricated from materials of different atomic number. Sh increases with field size less rapidly when cylindrical build-up caps are constructed from high atomic number materials. This is a consequence of a net scatter of contamination electrons away from the detector. Ion chambers and diodes give identical results when the same type of build-up caps are used. Contamination electrons can be avoided by the use of columnar miniphantoms that have sufficient wall thickness in the radial direction. This radial wall thickness is characterized in this work for 6, 10, and 18 MV x-ray beams. Sh increases with field size less rapidly when columnar miniphantoms are constructed from high atomic number materials. This is due to the decrease in the average energy of photons at large field sizes. It is concluded that to obtain Sh for dosimetry in water, cylindrical build-up caps and columnar miniphantoms should be constructed from material with an atomic number close to that of water.
Asunto(s)
Fantasmas de Imagen , Planificación de la Radioterapia Asistida por Computador , Calibración , Humanos , Dosificación Radioterapéutica , Reproducibilidad de los Resultados , Agua , Rayos XRESUMEN
PURPOSE: With increased interest in 3-D conformal radiation therapy and dose escalation, it is necessary to provide advanced techniques to assure quality in treatment delivery. Multi-institutional trials for these newer treatment techniques require methods of verifying the consistency of treatments between the participating institutions. For this reason, a phantom was designed to address the quality and consistency of Radiation Therapy Oncology Group (RTOG) 3-D prostate treatment protocol. METHODS AND MATERIALS: A solid water pelvic and prostate phantom for imaging, volume rendering, treatment planning, and dosimetry applications for performing comprehensive quality assurance has been designed and fabricated. Its configuration was based upon CT slices obtained from a patient study. Individual slices were machined with corresponding contours of the prostate, bladder, rectum, and the left and right femurs. Most of the phantom is made of solid water (Gammex/RMI, Middleton, WI), while the femurs are made of bone-equivalent material. The CT numbers from patient images were used to adjust the solid water composition within the organ volumes, providing image contrast from the remainder of the phantom. Cylindrical insertion grooves are machined in the phantom to allow placement of ionization chambers and thermal luminal dosimeters (TLDs) for dosimetry applications. During imaging, the cavities are filled with rods fabricated from solid water material. RESULTS: The phantom is being used to evaluate the consistency of a range of processes in radiation therapy simulation, planning, and delivery of 3-D-based treatments for prostate cancer. CONCLUSION: The ultimate study objective is to use the phantom to evaluate the accuracy and consistency of treatments delivered by institutions participating in national collaborative clinical trials involving 3-D conformal dose escalation.
Asunto(s)
Pelvis , Fantasmas de Imagen , Próstata , Neoplasias de la Próstata/radioterapia , Planificación de la Radioterapia Asistida por Computador , Humanos , Masculino , Estudios Multicéntricos como Asunto , Dosificación RadioterapéuticaRESUMEN
The goals of this task group are to examine the current high dose-rate (HDR) treatment delivery practices and to prepare a document to assure safe delivery of HDR treatments. The document consists of detailed HDR procedures for design of an HDR brachytherapy program, staffing and training, treatment specific quality assurance, and emergency procedures. The document provides an extensive quality assurance (QA) check list. It reviews all aspects of HDR treatment delivery safety, including prescription, treatment plan, treatment delivery, and radiation safety.
Asunto(s)
Braquiterapia/normas , Planificación de la Radioterapia Asistida por Computador , Radioterapia de Alta Energía/normas , Braquiterapia/instrumentación , Braquiterapia/métodos , Documentación , Urgencias Médicas , Diseño de Equipo , Humanos , Grupo de Atención al Paciente , Garantía de la Calidad de Atención de Salud , Radioterapia de Alta Energía/instrumentación , Radioterapia de Alta Energía/métodosRESUMEN
Experimental simulations for tomotherapy beam delivery were performed using a computer-controlled phantom positioner, a cylindrical phantom, and a 6 MV x-ray slit beam. Both continuous helical beam and sequential segmented tomotherapy (SST) beam deliveries were evaluated. Beam junctioning problem due to couch indexing error or field width errors presented severe dose uniformity perturbations for SST, while the problem was minimized for helical beam delivery. Longitudinal breathing motions were experimentally simulated for helical and SST beam delivery. While motions reduced the dose uniformity perturbations for SST, small artifacts in dose uniformity can be introduced for helical beam delivery. With typical breath frequency and magnitude, for a slit beam of 2.0 cm width at 4 rpm, the dose uniformity perturbation was not significant. A running start/stop technique was implemented with helical beam delivery to sharpen the 20%-80% longitudinal dose fall-off from 1.5 to 0.5 cm. The latter was comparable to the corresponding dose penumbra of a conventional 6 MV 10 x 10 cm2 field. All together, helical beam delivery showed advantages over SST for tomotherapy beam delivery under similar delivery conditions.