RESUMEN
This research investigates the improvements of ozone (O3) annealing on the optical and etching characteristics of TiO2/Al2O3 multilayer band-pass filters designed for potential optoelectronic applications. The band-pass filters were fabricated using atomic layer deposition (ALD), and their performance was systematically analyzed after the addition of O3 annealing at moderate temperatures (up to 300 °C). Results reveal that O3 annealing improves the optical transmittance of the multilayers by approximately 40% without significant spectral changes (â¼6 nm). The observed enhancement in the transmittance is attributed to the improved stoichiometry of TiO2. By filling in the oxygen vacancies created during the fabrication process, it reduces its extinction coefficient. Furthermore, the O3 annealing enhances the stability of TiO2 against wet etching, improving the uniformity of etched surfaces. Etching on the ozone-annealed multilayer was up to 8 times more homogeneous, as observed in the roughness. The relatively short duration of the O3 annealing process, approximately 1.6 h, makes it a cost-effective alternative compared to using ozone in the ALD process, which can last several hours for thick optical coatings.
RESUMEN
The scientific community is exploiting the use of silver nanoparticles (AgNPs) in nanomedicine and other AgNPs combination like with biomaterials to reduce microbial contamination. In the field of nanomedicine and biomaterials, AgNPs are used as an antimicrobial agent. One of the most effective approaches for the production of AgNPs is green synthesis. Lysiloma acapulcensis (L. acapulcensis) is a perennial tree used in traditional medicine in Mexico. This tree contains abundant antimicrobial compounds. In the context of antimicrobial activity, the use of L. acapulcensis extracts can reduce silver to AgNPs and enhance its antimicrobial activity. In this work, we demonstrate such antimicrobial activity effect employing green synthesized AgNPs with L. acapulcensis. The FTIR and LC-MS results showed the presence of chemical groups that could act as either (i) reducing agents stabilizing the AgNPs or (ii) antimicrobial capping agents enhancing antimicrobial properties of AgNPs. The synthesized AgNPs with L. acapulcensis were crystalline with a spherical and quasi-spherical shape with diameters from 1.2 to 62 nm with an average size diameter of 5 nm. The disk diffusion method shows the magnitude of the susceptibility over four pathogenic microorganisms of clinical interest. The antimicrobial potency obtained was as follows: E. coli ≥ S. aureus ≥ P. aeruginosa > C. albicans. The results showed that green synthesized (biogenic) AgNPs possess higher antimicrobial potency than chemically produced AgNPs. The obtained results confirm a more significant antimicrobial effect of the biogenic AgNPs maintaining low-cytotoxicity than the AgNPs produced chemically.
Asunto(s)
Antiinfecciosos/farmacología , Fabaceae/química , Fabaceae/metabolismo , Tecnología Química Verde/métodos , Nanopartículas del Metal/química , Plata/química , Candida albicans/efectos de los fármacos , Escherichia coli/efectos de los fármacos , Pseudomonas aeruginosa/efectos de los fármacos , Plata/farmacologíaRESUMEN
Herein, a series of N-doped carbon nanotube (CNx) samples were obtained by modifying the synthesis temperature. Consequently, the proportion of graphitic nitrogen (Ngraph) in the samples was systematically increased as a function of temperature. This allowed evaluation of the role of the CNx graphitic nitrogen in the oxygen reduction reaction (ORR). A correlation between the Ngraph content and the ORR onset potential was observed, which shifted to more positive potentials with an increase in kinetic current density (jk); this showed that Ngraph played a significant catalytic role in the ORR. The samples with high Ngraph content favored the two-electron pathway for the ORR not only in basic media (pH = 13) but also in neutral media (pH = 7), representing an attractive alternative for wastewater remediation through the on-site generation of H2O2. The energetic calculations showed that the formation of H2O2 must be favorable in the presence of graphitic nitrogen sites. Finally, the performance of the buckypaper arrangement was evaluated, and the CNx buckypaper showed a higher cathodic current peak as compared to CNx traditional ink dispersions. Overall, this study not only sheds light on the role of Ngraph in the ORR, but also demonstrates that CNx buckypaper is an efficient 3D electrode for electrocatalytic applications.
RESUMEN
The current photodynamic therapy (PDT) is majorly hindered by the shallow penetration depth and oxygen dependency, limiting its application to deep-seated solid hypoxic tumors. Thus, it is meaningful to develop efficient X-ray mediated PDT system capable of generating reactive oxygen species (ROS) under both the normoxic and hypoxic conditions. Herein, we report the synthesis and characterization of nanocomposite, YAG:Pr@ZnO@PpIX with an amalgamation of UV-emitting Y2.99Pr0.01Al5O12 (YAG:Pr) nanoscintillator, and zinc oxide (ZnO) and protoporphyrin IX (PpIX) as photosensitizers. YAG:Pr surface was coated with a ZnO layer (â¼10â¯nm) by atomic layer deposition, and then PpIX was covalently conjugated via a linker to give YAG:Pr@ZnO@PpIX. The photo- and cathodoluminescence analyses gave the evidences of efficient energy transfer from YAG:Pr to ZnO at â¼320â¯nm, and YAG:Pr@ZnO to PpIX at Soret region (350-450â¯nm). The nanohybrid was able to produce both, Type I and Type II ROS upon direct and indirect photoactivation with UV365nm and UV290nm, respectively. In vitro cytotoxicity of non-activated YAG:Pr@ZnO@PpIX in mouse melanoma cells revealed low toxicity, which significantly enhanced upon photoactivation with UV365nm indicating the photokilling property of the nanohybrid. Overall, our preliminary studies successfully demonstrate the potential of YAG:Pr@ZnO@PpIX to overcome the limited penetration and oxygen-dependency of traditional PDT.
Asunto(s)
Nanocompuestos/química , Fotoquimioterapia , Fármacos Fotosensibilizantes/farmacología , Especies Reactivas de Oxígeno/metabolismo , Aluminio/química , Aluminio/farmacología , Animales , Supervivencia Celular/efectos de los fármacos , Ratones , Estructura Molecular , Tamaño de la Partícula , Fármacos Fotosensibilizantes/química , Praseodimio/química , Praseodimio/farmacología , Protoporfirinas/química , Protoporfirinas/farmacología , Propiedades de Superficie , Células Tumorales Cultivadas , Itrio/química , Itrio/farmacología , Óxido de Zinc/química , Óxido de Zinc/farmacologíaRESUMEN
This work evaluated the inhibition effect of low molecular weight alcohol (ethanol) on naproxen (NAP) degradation by conventional and catalytic ozonation. The reaction system considered the ethanol as complementary organic matter in water. The conventional ozonation and in the presence of nickel oxide (O3-NiO) achieved 98% NAP degradation during the first 15 min of reaction despite the presence of ethanol. However, NAP degradation presented a delaying effect during the first minutes of treatment with this alcohol. The latter phenomenon indicates that ethanol concentration played a meaningful role in ozonation effectiveness in comparison with the presence of NiO catalyst. The presence of NiO did not generate differences in the byproducts in comparison with conventional ozonation. The intermediates were detected using the Electrospray Ionization Mass Spectrometry technique and have only one aromatic ring in their chemical structure. In samples without ethanol, these byproducts appeared only in the first 5 min of reaction. The TOC study demonstrated the increment of 25% in the mineralization degree with the presence of NiO due to the formation of ·OH species.
RESUMEN
Naphthalene (NA) is a polycyclic aromatic hydrocarbon with toxic properties in aquatic systems. Ozonation (O3) and catalytic ozonation (O3-cat) processes are attractive alternatives of degradation for this kind of compound. NA (20 mg L-1) degradation by conventional and catalytic ozonation in the presence of a cosolvent (ethanol) was the aim of this study. This solution was proposed to simulate some aspects of real wastewaters where not only water acts as solvent. Two proportions of the mixture ethanol/water were selected (30:70 and 50:50) with the purpose of studying the cosolvent effect on NA degradation system by ozonation. O3-cat process used nickel oxide as catalyst (0.1 g L-1). The degradation analysis of NA by O3-cat in two different proportions of cosolvent showed that in the case of 30:70 (ethanol/water), a 95 % of NA elimination in 60 min was obtained, while in the case 50:50 (ethanol/water), only 55 % was achieved. The O3 process showed similar results of degradation to the initial compound in comparison with catalytic system. According to these results, there is an inhibition effect in pollutant removal by ethanol due to the higher ethanol concentration; the lower elimination rate of NA was obtained (by 40 % during the 60 min). The by-products analysis of ozonation process detected oxalic and formic acids. Treatments with NiO presented less production of organic acids in comparison with conventional ozonation process. The high concentration of ethanol has a relevant factor in the elimination of NA and formation of organic acids; samples with 50 % of cosolvent have showed a higher concentration of organic acids. X-ray photoelectron spectroscopy (XPS) study of O3-cat of diluent (O3-NiO control) and O3-NA-NiO showed the presence of -CO3 absorbed on catalyst due to ethanol decomposition.
Asunto(s)
Etanol/química , Naftalenos/química , Níquel/química , Eliminación de Residuos Líquidos/métodos , Contaminantes Químicos del Agua/química , Catálisis , Ozono/química , Solventes/química , Eliminación de Residuos Líquidos/instrumentaciónRESUMEN
In this paper, the effect of modifiers and pretreatments on the electronic states of 1 nm gold nanoparticles (AuNPs) supported on silica was systematically studied. AuNPs deposited on silica (particle size of 2-4 nm) modified with Ce, La and Fe oxides, were studied by FTIR of adsorbed CO after different redox treatments at 100, 300 and 500 °C. This study was conducted at room temperature to allow detecting the electronic states of gold, which is more likely involved in CO oxidation at the same temperature. AuNP size distribution was measured by HRTEM. It is shown that the electronic state of gold species (Aun(δ-), Au°, Aun(δ+), Auâº) in 1 nm AuNPs is sensitive to the modifier as well as to the temperatures of redox pretreatments. Supports modified with the same additives but containing larger AuNPs (~3, 4, 5, and 7 nm) were also studied. They showed that Au° remains stable irrespective of additives and redox pretreatments, indicating no significant effect of such treatments on the electronic properties of larger AuNPs. Samples with a predominant AuNP size of 2 nm are an intermediate case between these two groups of materials.
Asunto(s)
Oro/química , Nanopartículas del Metal/química , Dióxido de Silicio/química , Adsorción , Electrones , Nanopartículas del Metal/ultraestructura , Microscopía Electrónica de Transmisión , Oxidación-Reducción , Tamaño de la Partícula , Espectroscopía Infrarroja por Transformada de Fourier , TemperaturaRESUMEN
A new technique for the silylation of pure-silica-zeolite MEL low-k films has been developed in which the spin-on films are calcined directly in trimethylchlorosilane or 1,1,1,3,3,3-hexamethyldisilazane (HMDS) in order to protect the films against corrosive wet etch chemicals and ambient moisture adsorption. In an alternative procedure, HMDS is also added to the zeolite suspension before film preparation. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, water-soak tests, and HF etch tests are performed to characterize the films. The dielectric constant is as low as 1.51, and the films resist HF attack up to 5.5 min. These properties are highly desirable by the semiconductor industry for next-generation microprocessors.
RESUMEN
The surface chemistry of atomic layer depositions (ALD) of titanium nitride films using alternate doses of TiCl4 and NH3 was characterized by using X-ray photoelectron spectroscopy. The nature of the species deposited by each half-reaction was explored first. Evidence was obtained for the partial loss of chlorine atoms and the reduction of the metal during the adsorption of the TiCl4. Subsequent ammonia treatment removes most of the remaining chlorine and leads to the formation of a nitride. Both half-reactions were proven self-limited, stopping after the deposition of submonolayer quantities of the materials. Repeated ALD cycles were shown to lead to the buildup of thick films. However, those films display a Ti3N4 layer on top of the expected TiN. The data suggest that the reduction of the Ti4+ species may therefore occur during the TiCl4, not NH3, dosing step. The incorporation of impurities in the films was also investigated. Chlorine is only deposited on the surface, and in negligible quantities. This Cl appears to originate from readsorption of the HCl byproduct, and could be removed by light sputtering, heating, or further ammonia treatment. Oxygen incorporation, on the other hand, was unavoidable and was determined to possibly come from diffusion from the underlying substrate.
RESUMEN
A major challenge in molecular electronics and related fields entails the fabrication of elaborate molecular architectures on electroactive surfaces to yield hybrid molecular/semiconductor systems. A method has been developed for the stepwise synthesis of oligomers of porphyrins linked covalently via imide units. A triallyl-porphyrin bearing an amino group serves as the base unit on Si(100), and the alternating use of a dianhydride (3,3',4,4'-biphenyltetracarboxylic dianhydride) and a porphyrin-diamine for reaction enables the rapid and simple buildup of oligomers composed of 2-5 porphyrins. The properties of these porphyrin "multad" films on Si(100) were interrogated using a variety of techniques. The charge densities of the redox-active porphyrin oligomers were determined via electrochemical methods. The stepwise growth was evaluated in detail via Fourier transform infrared (FTIR) spectroscopy and by selected X-ray photoelectron spectroscopic (XPS) studies. The morphology was probed via AFM methods. Finally, the thickness was evaluated by using a combination of ellipsometry and AFM height profiling, accompanied by selected XPS studies. Collectively, these studies demonstrate that high charge density, ultrathin, multiporphyrin films of relatively well-controlled thickness can be grown in a stepwise fashion using the imide-forming reaction. The increased charge densities afforded by the porphyrin multads may prove important for the fabrication of molecular-based information-storage devices. This bottom-up process for construction of surface-tethered molecular architectures complements the top-down lithographic approach for construction of functional devices with nanoscale dimensions.
RESUMEN
X-ray photoelectron and Fourier transform infrared spectroscopy studies are reported for self-assembled monolayers (SAMs) of two tripodal thiol-functionalized metalloporphyrins (Zn and Cu) and three benchmark tripods on gold substrates. The tripodal unit common to all five molecules is 1-(phenyl)-1,1,1-tris(4-mercaptomethylphenyl)methane (Tpd). Both porphyrins contain S-acetyl-protected thiols and are linked to the 4-position of the phenyl ring of Tpd via a phenylethyne group. The benchmark molecules include (1) two tripods containing a bromine atom at the 4-position of the apical phenyl ring, one a free thiol and the other its S-acetyl-protected analogue, and (2) a S-acetyl-protected tripod containing a phenylethyne unit at the 4-position of the apical phenyl group. Together, the spectroscopic studies reveal that none of the five tripodal molecules bond to the gold surface via all three sulfur atoms. Instead, the average number of bound thiols ranges from 1.5 to 2, with the porphyrinic molecules generally falling at the middle to upper end of the range and the smallest benchmark tripods falling at the lower end. Similar surface binding is found for the S-acetyl-protected and free benchmark tripods, indicating that the presence of the protecting group does not influence binding. Furthermore, the surface binding characteristics of the SAMs are not sensitive to deposition conditions such as solvent type, deposition time, or temperature of the solution.
Asunto(s)
Oro/química , Porfirinas/química , Compuestos de Sulfhidrilo/química , Adsorción , Cobre/química , Estructura Molecular , Compuestos Organometálicos/síntesis química , Compuestos Organometálicos/química , Sensibilidad y Especificidad , Espectrometría por Rayos X/métodos , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Estereoisomerismo , Propiedades de Superficie , Zinc/químicaRESUMEN
Characterization of palladium catalysts, supported on alumina and alumina modified by zirconia added by impregnation, was performed by CO adsorption from 143 to 298 K and monitored by infrared spectroscopy. It was found that the population of the Al3+ octahedral sites in the alumina decreased by the addition of zirconia. In contrast to the case of the pure alumina support, where stabilization of Pd+ was observed, Pd2+ was formed preferentially on samples where zirconia was added, and higher crystallinity in the metallic palladium was observed. Studies of CO adsorption at low temperatures (143 K) gave a better description of the surface species, since at higher temperatures (298 K) the reaction of the CO with some of the palladium oxide particles led to the partial reduction of the latter.
Asunto(s)
Óxido de Aluminio/química , Monóxido de Carbono/química , Paladio/química , Circonio/química , Adsorción , Espectrofotometría Infrarroja/métodos , TemperaturaRESUMEN
Redox kinetics were measured for two electroactive molecules attached to Si(100) surfaces, a ferrocene (Fc-BzOH) and a Zn(II) trimesitylporphyrin (Por-BzOH). Each molecule was derivatized with a benzyl alcohol linker for attachment to the Si surface via the formation of a Si-O bond. A complete protocol was developed for the preparation of stable Si(100) surfaces derivatized with the electroactive molecules. The redox-kinetic measurements were performed on the resulting Fc-BzOH and Por-BzOH monolayers to probe (1) the rate of electron transfer (k0) for oxidation in the presence of applied potentials and (2) the rate of charge dissipation after the applied potential is disconnected (in the form of a charge-retention half-life t1/2). The k0 values for the two types of monolayers were found to be similar to one another as were the t1/2 values. Perhaps more importantly, the electron-transfer rates for both the Fc-BzOH and the Por-BzOH monolayers differ from the charge-dissipation rates by approximately 6 orders of magnitude and are strongly dependent on the surface concentration of the electroactive species. For the Por-BzOH monolayers on Si(100), the k0 and t1/2 values and their trends as a function of surface coverage were determined to be similar to those previously measured for the analogous thiol-derivatized molecule assembled on Au(111). In contrast, the Fc-BzOH monolayers on Si(100) were found to exhibit much slower electron-transfer and charge-dissipation rates than those in the corresponding thiol-Au(111) case. Two alternative hypotheses are advanced to explain both the diminution in rates with increased surface coverage and the contrasting behavior with the analogous thiols on Au, one based on space-charge effects at the monolayer-solution interface, and a second relying on changes in distance of the redox centers from the surface as modulated by the orientation of the linking chains. Collectively, the ability to prepare and study stable, electroactive molecular media on Si(100) is likely to be key in the development of hybrid molecular/semiconductor devices.