Comparison of different mechanical refining technologies on the enzymatic digestibility of low severity acid pretreated corn stover.

The effect of mechanical refining on the enzymatic digestibility of pretreated corn stover (PCS) was investigated. Low severity, dilute sulfuric acid PCS was subjected to mechanical refining using a bench-scale food processor blender, a PFI mill, a 12-inch laboratory disk refiner, and a 25 mm co-rotating twin-screw extruder. Glucose yields from enzymatic hydrolysis were improved by 10-15% after blending and disk refining, while PFI refining and twin-screw extrusion showed a glucose yield improvement of 16-20%. A pilot scale refining test using a Szego mill was performed and showed approximately 10% improvements in biomass digestibility. This suggests the possibility to scale up a mechanical refining technique to obtain similar enzymatic digestibility glucose yield enhancement as achieved by PFI milling and extrusion technologies. Proposed mechanisms of each mechanical refining technology are presented and reasons for improvements in biomass digestibility are discussed in this paper.

Experimental study on local mass transfer in a simplified bifurcation model: potential role in atherosclerosis.

Local mass transfer coefficients and flow patterns were examined in an idealized human aortic bifurcation model. The objectives of this study are to gain further insights on the convective mass transfer process and its possible role in the localization of atherosclerotic lesions. The laser photochromic tracer method provided velocity and wall shear stress estimates in the plane of symmetry of a UV-transparent Plexiglas bifurcation model. Steady flow data were acquired at Reynolds numbers of 500, 600, and 750. A novel copper electrodeposition technique was used to obtain time-averaged convective local mass transfer coefficients in a model identical to that used in the flow experiments. The laminar flow mass transfer data for the trunk of the bifurcation are in good agreement with the analytical Levesque solution. At the bifurcation, higher mass transfer coefficients along the inner wall and lower ones along the outer wall were observed. Further, mass transfer and wall shear stress follow similar patterns both on the inner and outer walls in that StSc 2/3 and C(f)/2 demonstrate analogous behavior. Lower transfer rates of momentum and mass occurred along the outer wall of the branches where lesions tend to develop.