RESUMEN
Metal node engineering, which can optimize the electronic structure and modulate the composition of poor electrically conductive metal-organic frameworks, is of great interest for electrochemical natural seawater splitting. However, the mechanism underlying the influence of mixed-metal nodes on electrocatalytic activities is still ambiguous. Herein, a strategic design is comprehensively demonstrated in which mixed Ni and Co metal redox-active centers are uniformly distributed within NH2-Fe-MIL-101 to obtain a synergistic effect for the overall enhancement of electrocatalytic activities. Three-dimensional mixed metallic MOF nanosheet arrays, consisting of three different metal nodes, were in situ grown on Ni foam as a highly active and stable bifunctional catalyst for urea-assisted natural seawater splitting. A well-defined NH2-NiCoFe-MIL-101 reaches 1.5 A cm-2 at 360 mV for the oxygen evolution reaction (OER) and 0.6 A cm-2 at 295 mV for the hydrogen evolution reaction (HER) in freshwater, substantially higher than its bimetallic and monometallic counterparts. Moreover, the bifunctional NH2-NiCoFe-MIL-101 electrode exhibits eminent catalytic activity and stability in natural seawater-based electrolytes. Impressively, the two-electrode urea-assisted alkaline natural seawater electrolysis cell based on NH2-NiCoFe-MIL-101 needs only 1.56 mV to yield 100 mA cm-2, much lower than 1.78 V for alkaline natural seawater electrolysis cells and exhibits superior long-term stability at a current density of 80 mA cm-2 for 80 h.
RESUMEN
Dopant-induced electron redistribution on transition metal-based materials has long been considered an emerging new electrocatalyst that is expected to replace noble-metal-based electrocatalysts in natural seawater electrolysis; however, their practical applications remain extremely daunting due to their sluggish kinetics in natural seawater. In this work, we developed a facile strategy to synthesize the 3D sponge-like hierarchical structure of Ru-doped NiCoFeP nanosheet arrays derived from metal-organic frameworks with remarkable hydrogen evolution reaction (HER) performance in natural seawater. Based on experimental results and density functional theory calculations, Ru-doping-induced charge redistribution on the surface of metal active sites has been found, which can significantly enhance the HER activity. As a result, the 3D sponge-like hierarchical structure of Ru-NiCoFeP nanosheet arrays achieves low overpotentials of 52, 149, and 216 mV at 10, 100, and 500 mA cm-2 in freshwater alkaline, respectively. Notably, the electrocatalytic activity of the Ru-NiCoFeP electrocatalyst in simulated alkaline seawater and natural alkaline seawater is nearly the same as that in freshwater alkaline. This electrocatalyst exhibits superior catalytic properties with outstanding stability under a high current density of 85 mA cm-2 for more than 100 h in natural seawater, which outperforms state-of-the-art 20% Pt/C at high current density. Our work provides valuable guidelines for developing a low-cost and high-efficiency electrocatalyst for natural seawater splitting.
RESUMEN
The rational design of highly active and stable electrocatalysts toward the hydrogen evolution reaction (HER) is highly desirable but challenging in seawater electrolysis. Herein we propose a strategy of boron-doped three-dimensional Ni2P-MoO2 heterostructure microrod arrays that exhibit excellent catalytic activity for hydrogen evolution in both alkaline freshwater and seawater electrolytes. The incorporation of boron into Ni2P-MoO2 heterostructure microrod arrays could modulate the electronic properties, thereby accelerating the HER. Consequently, the B-Ni2P-MoO2 heterostructure microrod array electrocatalyst exhibits a superior catalyst activity for HER with low overpotentials of 155, 155, and 157 mV at a current density of 500 mA cm-2 in 1 M KOH, 1 M KOH + NaCl, and 1 M KOH + seawater, respectively. It also exhibits exceptional performance for HER in natural seawater with a low overpotential of 248 mV at 10 mA cm-2 and a long-lasting lifetime of over 100 h.
RESUMEN
The adsorption ability of hydrogen, hydroxide, and oxygenic intermediates plays a crucial role in electrochemical water splitting. Electron-deficient metal-active sites can prompt electrocatalytic activity by improving the adsorption ability of intermediates. However, it remains a significant challenge to synthesize highly abundant and stable electron-deficient metal-active site electrocatalysts. Herein, we present a general approach to synthesizing a hollow ternary metal fluoride (FeCoNiF2) nanoflake array as an efficient and robust bifunctional electrocatalyst for the hydrogen evolution reaction (HER) and urea oxidation reaction (UOR). We find that the F anion withdraws electrons from the metal centers, inducing an electron-deficient metal center catalyst. The rationally designed hollow nanoflake array exhibits the overpotential of 30 mV for HER and 130 mV for UOR at a current density of 10 mA cm-2 and superior stability without decay events over 150 h at a large current density of up to 100 mA cm-2. Remarkably, the assembled urea electrolyzer using a bifunctional hollow FeCoNiF2 nanoflake array catalyst requires cell voltages of only 1.352 and 1.703 V to afford current densities of 10 and 100 mA cm-2, respectively, which are 116 mV less compared with that required for overall water splitting.
RESUMEN
Exploring efficient catalysts for alkaline seawater electrolysis is highly desired yet challenging. Herein, coupling single-atom rhodium with amorphous nickel hydroxide nanoparticles on copper nanowire arrays is designed as a new active catalyst for the highly efficient alkaline seawater electrolysis. We found that an amorphous Ni(OH)2 nanoparticle is an effective catalyst to accelerate the water dissociation step. In contrast, the single-atom rhodium is an active site for adsorbed hydrogen recombination to generate H2. The NiRh-Cu NA/CF catalyst shows superior electrocatalytic activity toward HER, surpassing a benchmark Pt@C. In detail, the NiRh-Cu NA/CF catalyst exhibits HER overpotentials as low as 12 and 21 mV with a current density of 10 mA cm-2 in fresh water and seawater, respectively. At high current density, the NiRh-Cu NA/CF catalyst also exhibits an outstanding performance, where 300 mA cm-2 can be obtained at an overpotential of 155 mV and shows a slight fluctuation in the current density over 30 h.
RESUMEN
We introduce an experimental setup for the simultaneous measurement of axial and radial strain variations of a hybrid carbon nanotube (CNT) yarn actuator, where a paraffin wax is melt-infiltrated inside the CNT yarn. Such a hybrid yarn system has been known as a Joule-heating-driven tensile/torsional actuator due to a large volume expansion of the infiltrated paraffin upon a solid-to-liquid phase transition. During the operation of this actuator, however, the axial strain variations along the yarn axis and the diameter change of the yarn, which is the radial strain variations perpendicular to the yarn axis, had been measured separately, which prohibits the exact understanding of the whole actuation dynamics. In the new experimental configuration, a laser scan micrometer is employed for the in situ yarn's diameter measurement and is combined with the conventional tensile actuation measurement setup for real-time data-taking during the actuation. When the hybrid CNT yarn was tested, the synchronized strain variation data in the axial and radial directions were obtained, which helps the analysis of these actuation phenomena especially in the intermediate states.
RESUMEN
The combination of quantum Hall conductance and charge-trap memory operation was qualitatively examined using a graphene field-effect transistor. The characteristics of two terminal quantum Hall conductance appeared clearly on the background of a huge conductance hysteresis during a gate-voltage sweep for a device using monolayer graphene as a channel,hexagonal boron-nitride flakes as a tunneling dielectric and defective silicon oxide as the charge storage node. Even though there was a giant shift of the charge neutrality point, the deviation of quantized resistance value at the state of filling factor 2 was less than 1.6% from half of the von Klitzing constant. At high Landau level indices, the behaviors of quantum conductance oscillation between the increasing and the decreasing electron densities were identical in spite ofa huge memory window exceeding 100 V. Our results indicate that the two physical phenomena, two-terminal quantum Hall conductance and charge-trap memory operation, can be integrated into one device without affecting each other.