RESUMEN
In this work, we propose and demonstrate a stable and wavelength-tunable erbium-doped fiber (EDF) ring laser. Here, a silicon-on-insulator (SOI)-based silicon-micro-ring-resonator (SMRR) is used as the wavelength selective element inside the fiber ring cavity. A uniform period grating coupler (GC) is used to couple between the SMRR and single mode fiber (SMF) and serves also as a polarization dependent element in the cavity. The output lasing wavelength of the proposed fiber laser can be tuned at a tuning step of 2 nm (defined by the free spectral range (FSR) of the SMRR) in a bandwidth of 35.2 nm (1532.00 to 1567.20 nm), which is defined by the gain of the EDF. The optical-signal-to-noise-ratio (OSNR) of each lasing wavelength is larger than 42.0 dB. In addition, the output stabilities of power and wavelength are also discussed.
Asunto(s)
Láseres de Estado Sólido , Rayos Láser , Silicio/química , Transductores , Diseño de Equipo , Análisis de Falla de Equipo , MiniaturizaciónRESUMEN
A novel method of protein array immobilization, using micro stamps to pick up proteins from micro wells and deposit them on to a bio-absorption chip, has been developed. This method can potentially transfer several protein spots on to an organized array for applications such as disease diagnosis and drug screening by parallel biological or chemical processes. Fabrication of the micro stamp and the micro well arrays involves thick-photoresist lithography, bulk micromachining, and a molding process, whereas fabrication of the bio-absorption chip involves amino-modification by use of APTS (aminopropyItrimethoxysilane) and surface activation by use of BS3 (bis-sulfosuccinimidyl suberate). Successful transfer of protein on to the bio-absorption surface using the micro stamp-well array has been demonstrated. The size variation between different stamping spots has been shown to be less than 10%, and the APTS-BS3 surface has also been proved to bind the protein efficiently. Appreciable protein retention was achieved during 6-h washing, which shows the binding strength of the bio-absorption surface is sufficient for protein processing.