RESUMEN
OBJECTIVE: Vertical jump height and oral function affect the general muscle condition. This study aimed to evaluate the association between vertical jump height and oral function among healthy older individuals. BASIC RESEARCH DESIGN: Cross-sectional analytic study. PARTICIPANTS: 231 independent older people (mean age, 74.4 ± 5.6 years) who participated in the Kyoto Elders Physical Fitness Measurement Research Project. Individuals with partial or complete edentulousness who did not use a prosthetic device or complained of oral/maxillofacial pain were excluded from the study. INTERVENTIONS: Grip strength was measured using a Smedley Hand Dynamometer. To measure masticatory performance, the participants were instructed to chew a gummy jelly on their habitual chewing side (left or right) for 20 s. Occlusal force, contact area, and pressure were also assessed. MAIN OUTCOME MEASURES: The outcome variable was vertical jump height. The predictor variables were physical status (age, body mass index, and grip strength), oral status (number of present teeth and denture use), and oral function (masticatory performance, occlusal force, occlusal contact area, occlusal pressure, and tongue pressure). These relationships were evaluated with univariate analysis, and then multiple regression analysis was performed with age as the covariate for each male and female participant. RESULTS: Vertical jump height was significantly associated with grip strength in both men and women. Moreover, in women, it was associated with masticatory performance, occlusal force, and occlusal contact area. CONCLUSIONS: Vertical jump height was closely associated with oral function among healthy older women.
Asunto(s)
Fuerza de la Mordida , Lengua , Anciano , Anciano de 80 o más Años , Estudios Transversales , Femenino , Humanos , Japón , Masculino , Masticación , PresiónRESUMEN
Tongue pressure measured with a disposable hand-held balloon probe has been used for assessing tongue function; however, no diagnostic standard for assessing other oral functions exists currently. In this study, to develop a method for multifactorial manometric evaluation of oral functions, 20 men and 20 women (21-32 years of age) were instructed to apply 7-s maximal voluntary muscular effort on a hand-held balloon probe placed against the anterior and lateral parts of the palate, buccal surface of the molars on the habitual chewing side and labial surface of the anterior teeth for measuring anterior and posterior tongue, cheek and lip pressures (LPs), respectively. Intra-session reproducibility was determined by three repeated measurements, and associations between the obtained and the conventional data on oral diadochokinesis were tested. The men exhibited higher values of all the pressure types. Further, both genders showed a positive correlation between anterior and posterior tongue pressures (PTPs) (P < 0·05), but only the women exhibited positive correlations between anterior tongue and cheek pressures, cheek and PTPs, anterior tongue and LPs, and cheek and LPs (P < 0·05). No statistically significant correlation was found between the pressures and the number of syllabic articulations, except between LP and the number of /pa/ articulations in the women (r = 0·524, P < 0·05). In conclusion, the balloon probe method enables objective manometric evaluation of oral functions and could be an effective tool for clinical epidemiological studies and evidence-based decision-making in nursing care.
Asunto(s)
Mejilla/fisiología , Cinesis/fisiología , Boca/fisiología , Adulto , Femenino , Humanos , Japón , Labio/fisiología , Masculino , Manometría/instrumentación , Boca/fisiopatología , Presión , Factores Sexuales , Lengua/fisiología , Adulto JovenRESUMEN
The aim of this study was to investigate the dynamic viscoelastic properties of seven commercially available vinyl polysiloxane denture soft lining materials. Five rectangular specimens (2 x 10 x 30 mm) were prepared from each material. The complex modulus E* (MPa) and loss tangent (tan delta) of each specimen were determined with a non-resonance forced vibration method using an automatic dynamic viscoelastometer at 1 Hz after 1 day of dry storage, and after 1, 30, 60, 90 and 180 days of wet storage at 37 degrees C. All data were analysed using one-way anova and Bonferroni/Dunn's test for multiple comparisons with a significance level of P < 0.01. All materials varied widely in terms of viscoelasticities and showed both an increase in E* and a decrease in tan delta at 1 Hz after the 1-day wet storage. After 60 days of wet storage, both E* and tan delta did not change significantly. The stiffer materials (>30% filler content) with high E* values (>2.00 MPa) showed elastic behaviour with tan delta values of around 0.03. The softer materials (6% filler content) with high tan delta values (initial value > 0.10) showed viscous behaviour and were easily affected by water absorption after the 1-day wet storage. It can be concluded that for the proper selection of vinyl polysiloxane denture soft lining materials, it is very important to evaluate the viscoelastic properties after 60 days of wet storage.
Asunto(s)
Materiales Dentales/química , Alineadores Dentales/normas , Compuestos Organofosforados/química , Polivinilos/química , Elastómeros de Silicona/química , Siloxanos/química , Análisis de Varianza , Elasticidad , Humanos , Ensayo de Materiales , Estrés Mecánico , Vibración , ViscosidadRESUMEN
The purpose of this study was to clarify quantitatively the differences in tongue-tip motion among the dentulous elderly people and also among the elderly edentulous, both with and without their dentures and, to identify the influence of tooth loss and denture wear on tongue-tip motion. Fourteen young dentulous people, 12 elderly dentulous people and 13 elderly edentulous people participated in this study. Subjects were asked to swallow a 10 mL barium sulfate solution three times. The elderly edentulous people were asked to swallow the solution while wearing dentures and with dentures removed. Functional swallowing was recorded on cine-film with a digital subtraction angiography system. Lateral cinefluorography images were obtained from seated subjects. Using a cine-projector, the movements of the tongue surface were traced as dots and lines frame by frame on a single tracing sheet within a definite period of time from the beginning of the oral phase to the end of the pharyngeal phase. With counting the number of 'trajectories' of tongue-tip motion, tongue movements were classified as 'stable' and 'hyperactive' types. The results was that significantly more 'hyperactive' type subjects were found among the elderly edentulous who were not wearing dentures (12 of 13) compared with the dentulous young (1 of 14), the elderly dentulous (1 of 13) or the elderly edentulous wearing dentures (1 of 13) (P < 0.001). The tongue-tip motion for the 'hyperactive' type was very complex and the tongue-tip anchoring against the palate was always instable.
Asunto(s)
Deglución/fisiología , Boca Edéntula/fisiopatología , Lengua/fisiopatología , Pérdida de Diente/fisiopatología , Adulto , Factores de Edad , Anciano , Anciano de 80 o más Años , Análisis de Varianza , Cinerradiografía , Alisadura de la Restauración Dental , Femenino , Humanos , Masculino , Boca Edéntula/diagnóstico por imagen , Movimiento , Lengua/diagnóstico por imagen , Pérdida de Diente/diagnóstico por imagen , Adulto JovenRESUMEN
At the oral stage of swallowing, the tongue plays a major role and proper tongue performance is necessary to form the bolus and transfer it to the pharynx. For the present study we built a prototype device for safe and handy objective estimation of tongue motion and coordination with laryngeal elevation at swallowing. The device records tongue pressure by means of two strain gauge pressure transducers aligned 20 mm apart on a brass strap placed along the palatal midline. Laryngeal vibration is recorded with piezo-electric acceleration transducers. Time differences between pressure onset at the anterior and posterior transducers and the first spike from laryngeal vibration are measured. Ten healthy subjects were asked five times to swallow 5 mL of water. Pressure onset at the anterior transducer preceded posterior pressure by 294 +/- 164 ms. Given the distance between the transducers, the tongue contracted (squeezed) at a speed of 93 +/- 60 mm s(-1). Laryngeal vibration occurred 671 +/- 175 ms after the onset of anterior pressure. There was considerable variation in these parameters between subjects. Though the data is limited, the device successfully and easily revealed certain aspects of tongue motion and coordination with laryngeal elevation.
Asunto(s)
Deglución/fisiología , Laringe/fisiología , Medicina Oral/instrumentación , Lengua/fisiología , Adulto , Diseño de Equipo , Femenino , Humanos , Masculino , Movimiento/fisiología , Presión , Transductores , VibraciónRESUMEN
Membrane conductance of cultured rabbit articular chondrocytes was characterized by means of the patch-clamp technique. The resting membrane potential of the articular chondrocytes was about -42 mV. The membrane potential shifted in accordance with the prediction by the Nernst equation for Cl- when intracellular and extracellular concentrations of Cl- were changed. On the other hand, change in extracellular concentration of K+ produced no shift in the membrane potential of chondrocytes. The Cl- channel blocker 4-acetamido-4'-isothiocyanatostilbene-2'2-disulfonic acid (SITS) depolarized the membrane potential. These findings suggest that the membrane potential of the chondrocytes is determined mainly by Cl- conductance. Using the cell-attached patch-clamp method, a large unitary conductance of 217 pS was observed in the articular chondrocytes. The unitary current was reversibly blocked by SITS. Therefore, the unitary current was carried by Cl-. The Cl- channel showed voltage-dependent activation and the channels exhibited long-lasting openings. Therefore, the membrane potential of rabbit cultured articular chondrocytes was mainly determined by the activities of the large-conductance and voltage-dependent Cl- channels.
Asunto(s)
Canales de Cloruro/fisiología , Condrocitos/fisiología , Activación del Canal Iónico/fisiología , Potenciales de la Membrana/fisiología , Ácido 4-Acetamido-4'-isotiocianatostilbeno-2,2'-disulfónico/farmacología , Animales , Cartílago Articular/efectos de los fármacos , Cartílago Articular/fisiología , Canales de Cloruro/antagonistas & inhibidores , Canales de Cloruro/efectos de los fármacos , Cloro/metabolismo , Condrocitos/efectos de los fármacos , Conductividad Eléctrica , Miembro Posterior , Activación del Canal Iónico/efectos de los fármacos , Potenciales de la Membrana/efectos de los fármacos , Técnicas de Placa-Clamp , Potasio/farmacología , Conejos , HombroRESUMEN
OBJECTIVE: The aim of the present study was to analyse the relationship between masticatory ability (self-assessed masticatory ability and bite force) and intake of energy, nutrients and food items in a population sample of elderly subjects. DESIGN AND SUBJECTS: From a population sample of 80-year-old people, 160 individuals (74 men and 86 women) took part in an odontological study. MAIN OUTCOME MEASURES: A dental examination including bite force recording, a questionnaire focusing on self-assessed masticatory ability, and a dietary interview. SETTING: Department of Geriatric Medicine, Göteborg University, Sweden. RESULTS: The dental status among the participants varied much (from edentulous in both jaws--22%--to more than 20 natural teeth--30%). The mean maximum bite force was higher in men (165 N) than in women (105 N). Bite force was significantly correlated to the Eichner index and to the number of teeth. One third of the subjects reported no masticatory problem, whereas 18% identified > or = 3 such problems. The intake of energy and nutrients varied much but the means were well above recommended values. The correlations between dental status and bite force on one side and dietary intake on the other side were in general weak and most often statistically non-significant. Impaired general health and reduced dentition were both associated with more masticatory problems. CONCLUSION: The examined sample of 80-year-old subjects had a great variation in dental status, bite force and self-assessed masticatory ability, but these factors had only a minor influence on dietary selection and intake, which on average were well above recommended values.
Asunto(s)
Anciano de 80 o más Años/fisiología , Fuerza de la Mordida , Conducta Alimentaria , Masticación/fisiología , Encuestas Nutricionales , Anciano , Distribución de Chi-Cuadrado , Registros de Dieta , Metabolismo Energético/fisiología , Femenino , Humanos , Arcada Parcialmente Edéntula/fisiopatología , Masculino , Mandíbula , Maxilar , Boca Edéntula/fisiopatología , Análisis Multivariante , Autoevaluación (Psicología)RESUMEN
PURPOSE: The suitable buccolingual width and the location of occlusal rest seats for removable partial dentures have not been scientifically established. The aim of the present study was to use three-dimensional geometric analysis to evaluate the effects of buccolingual width and the location of occlusal rest seats on load transmission to the abutments for tooth-supported removable partial dentures. MATERIALS AND METHODS: A tooth-supported portion of a maxillary removable partial denture with two conventional circumferential cast clasps and an indirect retainer was analyzed. Occlusal loading of 100 N was applied to the buccal mesial cuspal incline 2.0 mm from the central fossa of the first molar or to the lingual mesial cuspal tip. Four combinations of position and width (wide, buccal shift, middle, and lingual shift) were simulated. RESULTS: For buccal loading, the wide rests and buccal-shift rests produced lower tensile forces at the indirect retainer. For lingual loading, the buccal-shift rests produced the lowest compressive force to the anterior abutment. CONCLUSION: Based on the tooth-supported removable partial dentures that were analyzed, buccal shifting of the rest seats seems to be advantageous for load transmission to the abutments.
Asunto(s)
Pilares Dentales , Análisis del Estrés Dental , Dentadura Parcial Removible , Preparación Protodóncica del Diente , Diente Premolar/fisiología , Fuerza Compresiva , Humanos , Procesamiento de Imagen Asistido por Computador , Maxilar , Diente Molar/fisiología , Resistencia a la TracciónRESUMEN
PURPOSE: The purpose of this study was to compare the mean loads required to fracture an isolated stone abutment tooth when various reinforcement techniques were used: (A) no reinforcement, (B) surface hardening, (C) impression trimming, (D) dowel placement, and (E) impression trimming plus dowel placement. MATERIALS AND METHODS: Die stone premolar specimens for each group (n = 4) were loaded perpendicular to the tooth long axis in 100-g increments 25 hours after pouring the impression. Mean load to failure was determined for each group. Data were evaluated with a one-way analysis of variance (alpha = 0.05) to determine differences among groups. Paired comparisons of factor level means were made with Tukey's q-test. RESULTS: The mean fracture load for Group E (7.6 kg) was significantly greater than Groups A (2.0 kg), B (2.1 kg), and C (3.4 kg). No significant difference was found between Groups D (6.0 kg) and E. CONCLUSIONS: Dowel reinforcement with impression trimming at the cervical portion of the abutment tooth resulted in significantly greater fracture resistance than the control, surface model hardener, or impression trimming alone. J Prosthodont 2001;10:22-25.
Asunto(s)
Pilares Dentales , Dentadura Parcial Removible , Modelos Dentales , Análisis de Varianza , Diente Premolar , Sulfato de Calcio/química , Revestimiento para Colado Dental/química , Técnica de Colado Dental/instrumentación , Falla de Equipo , Dureza , Humanos , Estadística como Asunto , Estrés Mecánico , Propiedades de SuperficieRESUMEN
An I-bar clasp is one of the most popular direct retainers for distal-extension removable partial dentures. However, no adequate information is available on the shape associated with biomechanics. This study aimed (1) to establish a three-dimensional (3D) finite-element modelling method of I-bar clasps, and (2) to clarify the effect of the shape on the stress and stiffness of I-bar clasps. 3D computer models of I-bar clasps were created with vertical and horizontal straight sections connected with a curved section with six parameters: thickness of the clasp tip (T), width of the clasp tip (W), radius of the curvature (R), horizontal distance between the base and the vertical axis (H), vertical dimension between the tip and the horizontal axis (V), taper (change of width per unit length along the axis)(Tp). Stress decreased as T, W, R and Tp increased, and as V decreased. Stiffness (which is proportional to retention) increased as T, W, R and Tp increased, and as H and V decreased. In both stress and stiffness, the effects of T and Tp were especially large. From the results, a systematic formula between the clasp shape and the stiffness was derived.
Asunto(s)
Aleaciones Dentales , Abrazadera Dental , Simulación por Computador , Aleaciones Dentales/química , Diseño de Prótesis Dental , Retención de Dentadura , Dentadura Parcial Removible , Elasticidad , Análisis de Elementos Finitos , Humanos , Análisis de los Mínimos Cuadrados , Ensayo de Materiales , Modelos Biológicos , Estrés Mecánico , Propiedades de SuperficieRESUMEN
An I-bar clasp is one of the most popular direct retainers for distal-extension removable partial dentures. However, no adequate information is available on preferable shape as determined by biomechanics. This study aimed (1) to investigate, by finite element analysis (FEA), the dimensions and stress of I-bar clasps having the same stiffness, and (2) to estimate a mechanically preferable clasp design. Three-dimensional FEA models of I-bar clasps were created with vertical and horizontal straight sections connected by a curved section characterized by six parameters: thickness of the clasp tip, width of the clasp tip, radius of the curvature, horizontal distance between the base and the vertical axis, vertical dimension between the tip and the horizontal axis, and taper (change of width per unit length along the axis). Stress was calculated with a concentrated load of 5 N applied 2 mm from the tip of the clasp in the buccal direction. A thinner and wider clasp having an taper of 0.020-0.023 and radius of curvature of 2.75-3.00 showed less stress. The results suggest that such a shape might be the preferable I-bar clasp shape as biomechanical viewpoint.
Asunto(s)
Abrazadera Dental , Diseño de Dentadura , Análisis de Elementos Finitos , Algoritmos , Fenómenos Biomecánicos , Simulación por Computador , Aleaciones Dentales/química , Elasticidad , Humanos , Docilidad , Estrés Mecánico , Propiedades de SuperficieRESUMEN
An I-bar clasp is a popular retainer for distal-extension removable partial dentures. However, there have been almost no evidence-based criteria on the mechanically preferable shape. The present study aimed to investigate the variations of dimension in I-bar clasps used in patients, and to clarify the effect of the variations on stiffness and stress of I-bar clasps by finite element analysis. Dimensions (thickness, width, taper, radius of curvature, length, relation to oral structures) of 23 I-bar clasps were measured. A three-dimensional finite element model was made for each measured I-bar clasp with vertical and horizontal straight sections connected with a curved section. A concentrated load of 5 N was applied at the lowest point of the tip that contacted the abutment in the buccal direction. Maximal equivalent stress and stiffness of each clasp were evaluated. The measured dimension, stiffness, and maximum stress showed wide variations. Mean stiffness was far from the proper one, and mean stress was near the proportional limit of Co-Cr alloy. Considering the stiffness and stresses in this study, only six clasps out of 23 were appropriate. These results suggest that evidence-based criteria of preferable shape of I-bar clasps should be determined.
Asunto(s)
Abrazadera Dental , Análisis del Estrés Dental , Diseño de Dentadura , Retención de Dentadura/instrumentación , Análisis del Estrés Dental/métodos , Dentadura Parcial Removible , Femenino , Análisis de Elementos Finitos , Humanos , Masculino , Persona de Mediana Edad , DocilidadRESUMEN
Reproducible and quantitative evaluation of patient satisfaction with their complete dentures is of great importance for preoperative diagnosis, treatment planning and assessment of complete denture treatment outcome. This study attempted (1) to clarify the degree of contribution of various factors to overall satisfaction, and (2) to develop a method for quantitative assessment of overall satisfaction with complete dentures. Twelve satisfaction factors and a three-grade scale were used to assess 302 complete denture patients. The contribution of each grade of the 12 factors to the overall satisfaction level was determined by multiple regression analysis. Seven factors were highly correlated to the overall satisfaction. Based on the level of contribution by these seven significant factors, a scoring method for satisfaction was established. Category scores for these factors were calculated and the sum of the category scores was converted to an integer between 0 and 100. The resulting quantification score was closely correlated with overall satisfaction. A protocol for scoring overall satisfaction was developed based on the scientifically analysed contribution of each satisfaction factor.
Asunto(s)
Dentadura Completa/psicología , Evaluación de Resultado en la Atención de Salud/métodos , Satisfacción del Paciente , Anciano , Distribución de Chi-Cuadrado , Retención de Dentadura , Estética Dental , Análisis Factorial , Femenino , Humanos , Masculino , Masticación , Modelos Psicológicos , Análisis Multivariante , Dolor , Habla , GustoRESUMEN
Double implants have been thought to have biomechanical advantages for single molar replacement. To evaluate the effectiveness of double implants versus a wide implant, the vertical forces and torque on each implant were calculated by three-dimensional geometric analysis. Buccal load (100N) perpendicular to cuspal inclination (20 degrees) was applied at the occlusal surface of the superstructure. The three kinds of load points (A, B, C) were 1.5, 3.5, and 5.5 mm from the mesial contact point, respectively. Three implants were compared: mesial and distal double implants (phi 3.3 mm), and a wide implant (phi 5 mm). The wide implant showed torque around the long axis (1.8-15.0 N x cm) whereas double implants had no torque. On the other hand, the vertical forces on the mesial double implant were both smaller (60%: loaded at point C) and larger (140%: loaded at point A) than the wide implant. Given the smaller surface area of the mesial double implant, this large force may generate much higher stress in the peri-implant bone. These results suggest that the biomechanical advantage of double implants for single molar replacement is questionable when the occlusal force is loaded at the occlusal surface near the contact point.
Asunto(s)
Implantes Dentales de Diente Único , Diseño de Prótesis Dental , Análisis del Estrés Dental , Fenómenos Biomecánicos , Fuerza de la Mordida , Fuerza Compresiva , Implantación Dental Endoósea , Humanos , Mandíbula , Modelos Biológicos , Modelos Dentales , Diente Molar , Torque , Soporte de PesoRESUMEN
To gather knowledge related to establishing criteria for selecting soft denture liners for individual patients, the effects of certain properties of soft denture liners on stress distribution were evaluated by two-dimensional finite element analysis. A partial mandibular edentulous ridge crest was modelled. Six combinations of thickness (mucosa: 1 or 2 mm; soft denture liner: 1, 2, or 3 mm) and 18 combinations of Young's modulus (mucosa: three kinds; soft denture liner: six kinds) were analysed. The ratio of maximum to minimum stress in the mucosa (stress ratio) was calculated to estimate stress concentration. In the case of thin mucosa (1 mm thickness), the lower the Young's modulus of the soft denture liner, the lower the stress ratio. However, if the soft denture liner had a lower Young's modulus than the mucosa, stress concentrated adversely. These results suggest that the elasticity of the soft denture liner should match the elasticity of the mucosa to obtain the optimum cushioning effect.
Asunto(s)
Análisis del Estrés Dental/métodos , Alineadores Dentales , Elasticidad , Análisis de Elementos Finitos , Humanos , Ensayo de Materiales , Mucosa Bucal/fisiologíaRESUMEN
This article describes a method of making an accurate interocclusal record when the most distal tooth is an abutment of a fixed partial denture. The method uses conical stops, prepared in the enamel of the abutment or made of composite or a metal core covered with composite, to maintain the vertical dimension of occlusion and to act as a third point of reference for a stable occlusal relationship when occluding the definitive casts. This article also explains how to use the cones and how to make each variety.
Asunto(s)
Registro de la Relación Maxilomandibular/instrumentación , Pilares Dentales , Dentadura Parcial Fija , HumanosRESUMEN
BACKGROUND: The purpose of this study was to establish a method to determine lower oesophageal sphincter (LOS) pressure using an endoscopic manometric sleeve assembly. METHODS: We used a 250-cm, three-lumen, 2.2-mm external diameter silicon catheter with a 3-cm sleeve sensor that was passed easily through the biopsy channel (2.8 mm diameter) of the gastroscope. Each lumen was perfused with distilled water using a low-compliance, pneumohydraulic capillary infusion system. Forty-seven healthy subjects and 35 patients with oesophageal disorders underwent study during routine diagnostic endoscopy. In 27 of the subjects, standard transnasal manometry with a three-lumen, 4.5-mm diameter polyvinyl catheter with a 5-cm sleeve sensor was also performed. RESULTS: Lower oesophageal sphincter pressure (LOS) was evaluated in all subjects (median pressure 16 mmHg, range 0-55 mmHg) for 6 min during routine endoscopic examination. The LOS pressure readings between standard and endoscopic manometry correlated well. The LOS pressure was significantly lower in healthy subjects with hiatal hernia than in those without hernia and was also significantly lower in patients with reflux oesophagitis than in healthy subjects. CONCLUSIONS: Endoscopic manometric sleeve assembly was used during routine endoscopic examination and was useful for easily determining LOS pressure. It could be used for evaluation of oesophageal motility disorders, thus avoiding the use of a more invasive and time-consuming method.
Asunto(s)
Unión Esofagogástrica/fisiología , Manometría/métodos , Estudios de Casos y Controles , Endoscopía del Sistema Digestivo , Enfermedades del Esófago/fisiopatología , Femenino , Hernia Hiatal/fisiopatología , Humanos , Masculino , Manometría/instrumentación , Persona de Mediana Edad , PresiónRESUMEN
A procedure for extension of the maxillary denture base for development of a posterior palatal seal is described. The technique involves provisional extension with paraffin wax and adding direct relining resin supported by a silicone putty core. This simple, quick procedure achieves immediate recovery of retention for underextended maxillary dentures without additional laboratory procedures.
Asunto(s)
Bases para Dentadura , Diseño de Dentadura , Retención de Dentadura , Dentadura Completa Superior , Hueso Paladar , Pulido Dental , Rebasado de Dentaduras , Humanos , Parafina , Resinas Sintéticas , Elastómeros de Silicona , Propiedades de Superficie , CerasRESUMEN
To prevent loosening or fracture of screws retaining the prosthesis to the implants in the posterior partially edentulous region, the use of staggered buccal and lingual offset placement or wide implants is suggested. However, it is not known how this usage compensates for the torque produced by lateral occlusal forces. This study evaluated the effectiveness of offset placement of three implants and a wide implant placement at the most posterior site. Three-dimensional geometric analysis was used to calculate the tensile force applied to gold screws in clinical situations with buccal or lingual loading perpendicular to cuspal inclination (10 or 20 degrees ). Four variations of the placement of three implants (3.75 mm) are: (1) straight; (2) buccal offset of the second implant; (3) lingual offset of the second implant; (4) a wide implant (5 mm) placement at most posterior site. The offset placement did not always decrease tensile force at the gold screw, but wide implant placement and decrease in cuspal inclination did.
Asunto(s)
Implantación Dental Endoósea/métodos , Diseño de Prótesis Dental/métodos , Arcada Parcialmente Edéntula/rehabilitación , Diente Premolar , Fenómenos Biomecánicos , Pilares Dentales/estadística & datos numéricos , Implantación Dental Endoósea/instrumentación , Implantación Dental Endoósea/estadística & datos numéricos , Diseño de Prótesis Dental/estadística & datos numéricos , Retención de Prótesis Dentales/instrumentación , Retención de Prótesis Dentales/métodos , Retención de Prótesis Dentales/estadística & datos numéricos , Análisis del Estrés Dental/métodos , Análisis del Estrés Dental/estadística & datos numéricos , Análisis de Elementos Finitos/estadística & datos numéricos , Aleaciones de Oro , Humanos , Arcada Parcialmente Edéntula/fisiopatología , Mandíbula , Diente MolarRESUMEN
This article describes a simple, quick and accurate procedure to replace a broken bar-type clasp with a new clasp arm. This procedure involves a resin matrix that transfers a new clasp arm from a working cast to a removable partial denture. This simple procedure enables quick and precise replacement of a broken clasp arm.