Methodology for selection of optical parameters as wastewater effluent organic matter surrogates.

Absorbance- and fluorescence-based optical parameters are commonly used as surrogates in engineered systems, but there is no systematic approach for selecting robust parameters. This study develops a methodology that is applied to a case study of differentiating wastewater effluent organic matter from naturally-derived organic matter. The methodology defines criteria to identify optical parameters that could detect statistically significant compositional differences in organic matter, independent of organic matter concentration, and measure fluorescence-based parameters with low susceptibility to inner filter effects. The criteria were applied to 26 parameters that were measured for 11 pairs of source water and conventionally-treated wastewater samples collected from sites with varied spatial and temporal conditions. Only two parameters, apparent fluorescence quantum yield measured at excitation 370 nm and fluorescence peak ratio A:T, met the criteria across all sites. These results demonstrate and encourage an objective and robust process for selecting optical surrogates for organic matter characterization.

Low levels of iron enhance UV/H2O2 efficiency at neutral pH.

While the presence of iron is generally not seen as favorable for UV-based treatment systems due to lamp fouling and decreased UV transmittance, we show that low levels of iron can lead to improvements in the abatement of chemicals in the UV-hydrogen peroxide advanced oxidation process. The oxidation potential of an iron-assisted UV/H2O2 (UV254 + H2O2 + iron) process was evaluated at neutral pH using iron levels below USEPA secondary drinking water standards (<0.3 mg/L). Para-chlorobenzoic acid (pCBA) was used as a hydroxyl radical (HO) probe to quantify HO steady state concentrations. Compounds degraded by different mechanisms including, carbamazepine (CBZ, HO oxidation) and N-nitrosodimethylamine (NDMA, direct photolysis), were used to investigate the effect of iron on compound degradation for UV/H2O2 systems. The effects of iron species (Fe2+ and Fe3+), iron concentration (0-0.3 mg/L), H2O2 concentration (0-10 mg/L) and background water matrix (low-carbon tap (LCT) and well water) on HO production and compound removal were examined. Iron-assisted UV/H2O2 efficiency was most influenced by the target chemical and the water matrix. Added iron to UV/H2O2 was shown to increase the steady-state HO concentration by approximately 25% in all well water scenarios. While CBZ removal was unchanged by iron addition, 0.3 mg/L iron improved NDMA removal rates in both LCT and well water matrices by 15.1% and 4.6% respectively. Furthermore, the combination of UV/Fe without H2O2 was also shown to enhance NDMA removal when compared to UV photolysis alone indicating the presence of degradation pathways other than HO oxidation.