Efficient photocatalytic degradation of ciprofloxacin using floating α-NiMoO4/mpg-C3N4/EP under visible light.

Conventional water treatment processes often fail to effectively remove antibacterial drugs, necessitating advanced strategies. This study presents the synthesis of novel floating, visible light-active α-NiMoO4/mpg-C3N4/EP composites for the removal of ciprofloxacin (CFX), a widely used quinolone antibiotic, from water. These composites are easily recoverable, highly stable, and demonstrate excellent reusability. The optimal photocatalyst, NC-101/EP (α-NiMoO4/mpg-C3N4 = 10:1), achieved 96.2 ± 1.1% degradation of CFX at 1.6 g L-1 within 80 min under visible light, significantly outperforming previous benchmarks. This high efficiency is attributed to the formation of interfacial junctions and a built-in electric field, which enhanced charge transfer and hydroxyl radical generation through an S-scheme mechanism. Fluorescence spectroscopy provided precise monitoring of CFX degradation without interference from coexisting intermediates. Density functional theory (DFT) calculations revealed that hydroxyl radicals initiated highly favorable and spontaneous oxidation of CFX, with a reaction rate constant of 6.04 × 109 M-1 s-1. The preferred oxidation pathway followed the sequence: HO-addition > H-abstraction > single electron transfer. Four degradation pathways were identified, with key intermediates confirmed by high-resolution mass spectrometry. The process also significantly reduced CFX toxicity, ensuring minimal environmental impact. These findings position NC-101/EP as a promising photocatalyst for large-scale water treatment applications targeting antibiotic contamination.

Microgels based on 0D-3D carbon materials: Synthetic techniques, properties, applications, and challenges.

Microgels are three-dimensional (3D) colloidal hydrogel particles with outstanding features such as biocompatibility, good mechanical properties, tunable sizes from submicrometer to tens of nanometers, and large surface areas. Because of these unique qualities, microgels have been widely used in various applications. Carbon-based materials (CMs) with various dimensions (0-3D) have recently been investigated as promising candidates for the design and fabrication of microgels because of their large surface area, excellent conductivity, unique chemical stability, and low cost. Here, we provide a critical review of the specific characteristics of CMs that are being incorporated into microgels, as well as the state-of-the art applications of CM-microgels in pollutant adsorption and photodegradation, H2 evoluation, CO2 capture, soil conditioners, water retention, drug delivery, cell encapsulation, and tissue engineering. Advanced preparation techniques for CM-microgel systems are also summarized and discussed. Finally, challenges related to the low colloidal stability of CM-microgels and development strategies are examined. This review shows that CM-microgels have the potential to be widely used in various practical applications.

Green synthesis of microalgae-based carbon dots for decoration of TiO2 nanoparticles in enhancement of organic dye photodegradation.

TiO2 is a well-known semiconductor used widely in the photocatalyst field, but its photocatalytic applications are hampered by a fast electron-hole recombination rate and low visible light absorption due to a wide-band-gap energy. Herein, we present a simple, low cost, and green approach to obtain carbon dots from microalgae, namely microalgae-based carbon dots (MCDs), using an unprecedented microwave-assisted treatment. The MCDs were successfully decorated on the surface of TiO2 nanoparticles. The as-prepared composite exhibited a superior photodegradation of methylene blue, compared with pristine TiO2 (83% and 27%, respectively) under visible light irradiation. The MCDs in TiO2-MCDs serve as electron reservoirs to trap photoinduced electrons and as photosensitizers for the improvement of visible light absorption; both factors play an important role in the improvement of the TiO2 photocatalytic activity. Furthermore, the as-prepared composite photocatalyst also exhibits high photostability and recyclability during the photodegradation of methylene blue. Therefore, this work provides an original approach to the development of environmentally friendly and highly effective photocatalysts for the treatment of various organic pollutants, which can go a long way toward ensuring a safe and sustainable environment.

Novel moisturized and antimicrobial hand gel based on zinc-aminoclay and Opuntia humifusa extract.

The high antimicrobial ability and low toxicity of zinc-aminoclay (ZnAC) are claimed in our previous reports. In this study, we formulate a novel hand gel based on ZnAC and Opuntia humifusa (O. humifusa) extract, which is a high moisturizing agent. The antimicrobial activity, cytotoxicity, moisturizing effect, and clinical skin irritation of the hand gel are evaluated. The hand gel with 0.5 wt.% ZnAC and 1.0 v/v% O. humifusa extract can kill more than 99% Escherichia coli (gram-negative bacteria) and Staphylococcus aureus (gram-positive bacteria) after 24 h. Toxicity evaluation shows that, the hand gel does not affect the viability of mammalian HaCaT cells. Additionally, skin moisture is increased by applying the hand gel while its viscosity is at the standard level of commercial products. The hand gel has a skin irritation index of 0.0 and is classified as a non-irritating product. We successfully formulated hand gel from ZnAC, glucomannan, glycerol, and O. humifusa extract. Owing to the high antimicrobial activity and skin protection of hand gels, they are suitable to be used as hand sanitizers in restaurants, hospitals, and homes effectively.

Bimetallic Thin-Film Combination of Surface Plasmon Resonance-Based Optical Fiber Cladding with the Polarizing Homodyne Balanced Detection Method and Biomedical Assay Application.

In this work, we present the optical birefringence properties of the optical fiber cladding that exists as an evanescent field where the refractive index (RI) of the analysis solution is applied for optical sensor aspiration. To enhance the performance of the sensor, we have investigated the sensor with different thicknesses of TiO2 coating and bimetallic (Ag-Al) film alloy combinations by thermal evaporation coating. We described a special balanced homodyne detection method for the intensity difference change between the p- and s-polarization lights in the surface plasmon resonance sensing systems, which is strongly determined by the RI of the test medium. The plasmonic optical fiber can measure a very small change of the RI of a glycerol solution, which is a resolution of 4.37 × 10-8 RI unit (RIU). This method has great advantages of a small-sized optical setup, high stability, high selectivity, easy chemical modification, and low cost. Furthermore, because of the experiment results, we observe that our approach can also eliminate the surrounding noise in the Mach-Zehnder interferometer, which shows the feasibility of this proposed technique. We demonstrate the fluorescence enhancement in detecting the C-reactive protein antibody conjugated with fluorescein isothiocyanate by means of near-field coupling between surface plasmons and fluorophores at spectral channels of emission. This technique can also be extended for application in a biomedical assay and in biochemical science, including molecular diagnostics relying on multichannels that require a small volume of the analyte at each channel which would suffer from the weakness of fluorescence if it were not for the enhancement technology.

Liposomes for delivery of antioxidants in cosmeceuticals: Challenges and development strategies.

Antioxidants (AOs) play a crucial role in the protection and maintenance of health and are also integral ingredients in beauty products. Unfortunately, most of them are sensitive due to their instability and insolubility. The use of liposomes to protect AOs and expand their applicability to cosmeceuticals, thereby, is one of the most effective solutions. Notwithstanding their offered advantages for the delivery of AOs, liposomes, in their production and application, present many challenges. Here, we provide a critical review of the major problems complicating the development of liposomes for AO delivery. Along with issues related to preparation techniques and encapsulation efficiency, the loss of protective function and inefficiency of skin permeability are the main disadvantages of liposomes. Corresponding development strategies for resolving these problems, with their respective advantages and drawbacks, are introduced, discussed in some depth, and summarized in these pages as well. Advanced liposomes have a vital role to play in the development and delivery of AOs in practical cosmeceutical product applications.

Hydrogel applications for adsorption of contaminants in water and wastewater treatment.

During the last decade, hydrogels have been used as potential adsorbents for removal of contaminants from aqueous solution. To improve the adsorption efficiency, there are numerous different particles that can be chosen to encapsulate into hydrogels and each particle has their respective advantages. Depending on the type of pollutants and approaching method, the particles will be used to prepare hydrogels. The hydrogels commonly applied in water/wastewater treatment was mainly classified into three classes according to their shape included hydrogel beads, hydrogel films, and hydrogel nanocomposites. In review of many recently research papers, we take a closer look at hydrogels and their applications for removal of contaminants, such as heavy metal ion, dyes, and radionuclides from water/wastewater in order to elucidate the reactions between contaminants and particles and potential for recycling and regeneration of the post-treatment hydrogels. Graphical abstract ᅟ.