Antibacterial and Cytotoxic Study of Hybrid Films Based on Polypropylene and NiO or NiFe2O4 Nanoparticles.

This study presents an in vitro analysis of the bactericidal and cytotoxic properties of hybrid films containing nickel oxide (NiO) and nickel ferrite (NiFe2O4) nanoparticles embedded in polypropylene (PP). The solvent casting method was used to synthesize films of PP, PP@NiO, and PP@NiFe2O4, which were characterized by different spectroscopic and microscopic techniques. The X-ray diffraction (XRD) patterns confirmed that the small crystallite sizes of NiO and NiFe2O4 NPs were maintained even after they were incorporated into the PP matrix. From the Raman scattering spectroscopy data, it was evident that there was a significant interaction between the NPs and the PP matrix. Additionally, the Scanning Electron Microscopy (SEM) analysis revealed a homogeneous dispersion of NiO and NiFe2O4 NPs throughout the PP matrix. The incorporation of the NPs was observed to alter the surface roughness of the films; this behavior was studied by atomic force microscopy (AFM). The antibacterial properties of all films were evaluated against Pseudomonas aeruginosa (ATCC®: 43636™) and Staphylococcus aureus (ATCC®: 23235™), two opportunistic and nosocomial pathogens. The PP@NiO and PP@ NiFe2O4 films showed over 90% bacterial growth inhibition for both strains. Additionally, the effects of the films on human skin cells, such as epidermal keratinocytes and dermal fibroblasts, were evaluated for cytotoxicity. The PP, PP@NiO, and PP@NiFe2O4 films were nontoxic to human keratinocytes. Furthermore, compared to the PP film, improved biocompatibility of the PP@NiFe2O4 film with human fibroblasts was observed. The methodology utilized in this study allows for the production of hybrid films that can inhibit the growth of Gram-positive bacteria, such as S. aureus, and Gram-negative bacteria, such as P. aeruginosa. These films have potential as coating materials to prevent bacterial proliferation on surfaces.

Biosorption of Pb(II) Using Natural and Treated Ardisia compressa K. Leaves: Simulation Framework Extended through the Application of Artificial Neural Network and Genetic Algorithm.

This study explored the effects of solution pH, biosorbent dose, contact time, and temperature on the Pb(II) biosorption process of natural and chemically treated leaves of A. compressa K. (Raw-AC and AC-OH, respectively). The results show that the surface characteristics of Raw-AC changed following alkali treatment. FT-IR analysis showed the presence of various functional groups on the surface of the biosorbent, which were binding sites for the Pb(II) biosorption. The nonlinear pseudo-second-order kinetic model was found to be the best fitted to the experimental kinetic data. Adsorption equilibrium data at pH = 2-6, biosorbents dose from 5 to 20 mg/L, and temperature from 300.15 to 333.15 K were adjusted to the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models. The results show that the adsorption capacity was enhanced with the increase in the solution pH and diminished with the increase in the temperature and biosorbent dose. It was also found that AC-OH is more effective than Raw-AC in removing Pb(II) from aqueous solutions. This was also confirmed using artificial neural networks and genetic algorithms, where it was demonstrated that the improvement was around 57.7%. The nonlinear Langmuir isotherm model was the best fitted, and the maximum adsorption capacities of Raw-AC and AC-OH were 96 mg/g and 170 mg/g, respectively. The removal efficiency of Pb(II) was maintained approximately after three adsorption and desorption cycles using 0.5 M HCl as an eluent. This research delved into the impact of solution pH, biosorbent characteristics, and operational parameters on Pb(II) biosorption, offering valuable insights for engineering education by illustrating the practical application of fundamental chemical and kinetic principles to enhance the design and optimization of sustainable water treatment systems.

Fabrication and Characterization of Hybrid Films Based on NiFe2O4 Nanoparticles in a Polymeric Matrix for Applications in Organic Electronics.

Hybrid films for applications in organic electronics from NiFe2O4 nanoparticles (NPs) in poly(3,4 ethylene dioxythiophene), poly(4-styrenesulfonate) (PEDOT:PSS), and poly(methyl methacrylate) (PMMA) were fabricated by the spin-coating technique. The films were characterized by infrared spectroscopy, atomic force microscopy, scanning electron microscopy, and energy-dispersive spectroscopy to subsequently determine their optical parameters. The electronic transport of the hybrid films was determined in bulk heterojunction devices. The presence of NiFe2O4 NPs reinforces mechanical properties and increases transmittance in the hybrid films; the PEDOT:PSS-NiFe2O4 NPs film is the one that has a maximum stress of 28 MPa and a Knoop hardness of 0.103, while the PMMA-NiFe2O4 NPs film has the highest transmittance of (87%). The Tauc band gap is in the range of 3.78-3.9 eV, and the Urbach energy is in the range of 0.24-0.33 eV. Regarding electrical behavior, the main effect is exerted by the matrix, although the current carried is of the same order of magnitude for the two devices: glass/ITO/polymer-NiFe2O4 NPs/Ag. NiFe2O4 NPs enhance the mechanical, optical, and electrical behavior of the hybrid films and can be used as semi-transparent anodes and as active layers.

Antibacterial Properties In Vitro of Magnesium Oxide Nanoparticles for Dental Applications.

(1) Dental caries, periodontitis, or peri-implantitis are commensal infections related to oral biofilm former bacteria. Likewise, magnesium oxide nanoparticles (MgO-NPs) were studied to introduce them to the antibacterial properties of a few microorganisms. Considering this, the purpose of the present investigation was to determine the antibacterial properties of MgO-NPs on representative oral strains. (2) Methods: MgO-NPs with a cubic crystal structure were obtained by magnesium hydroxide mechanical activation. After synthesis, the MgO-NPs product was annealed at 800 °C (2 h). The MgO-NPs obtained were tested against ten oral ATCC strains at ten serial concentrations (1:1 20.0-0.039 mg/mL per triplicate) using the micro-broth dilution method to determine the minimal inhibitory concentration (MIC) or minimal bactericidal concentration (MIB). Measures of OD595 were compared against each positive control with a Student's t-test. Viability was corroborated by colony-forming units. (3) Results: The polycrystalline structure had an average size of 21 nm as determined by X-ray diffraction and transmission electron microscopy (high resolution). Antimicrobial sensitivity was observed in Capnocytophaga gingivalis (MIB/MIC 10-5 mg/mL), Eikenella corrodens (MIB 10 mg/mL), and Streptococcus sanguinis (MIB 20 mg/mL) at high concentrations of the MgO-NPs and at lower concentrations of the MgO-NPs in Actinomyces israelii (MIB 0.039 mg/mL), Fusobacterium nucleatum subsp. nucleatum (MIB/MIC 5-2.5 mg/mL), Porphyromonas gingivalis (MIB 20 mg/mL/MIC 2.5 mg/mL), Prevotella intermedia (MIB 0.625 mg/mL), Staphylococcus aureus (MIC 2.5 mg/mL), Streptococcus mutans (MIB 20 mg/mL/MIC 0.321 mg/mL), and Streptococcus sobrinus (MIB/MIC 5-2.5 mg/mL). (4) Conclusions: The MgO-NPs' reported antibacterial properties in all oral biofilm strains were evaluated for potential use in dental applications.