RESUMEN
A fundamental aspect of the Endodontic field is the knowledge of root canal anatomy. Using a variety of techniques, the internal and external anatomy of teeth have been extensively investigated throughout the past century. Recent improvements in three-dimensional computed tomography have enabled more detailed evaluations of root canal morphology in both clinical and laboratory settings. Essentially, researches have unveiled that the root canal constitutes a complex system, comprising not only the main root canal but also lateral components, including isthmuses, fins, accessory canals and apical ramifications. Undoubtedly, this intricate morphology poses a significant challenge when it comes to the process of shaping, cleaning and disinfecting the root canal system. This article aims to explore the anatomical aspects of the root canal system that impact the chemomechanical procedures.
Asunto(s)
Preparación del Conducto Radicular , Tratamiento del Conducto Radicular , Humanos , Preparación del Conducto Radicular/métodos , Tratamiento del Conducto Radicular/métodos , Cavidad Pulpar/diagnóstico por imagen , Raíz del Diente , Tomografía Computarizada por Rayos X , Microtomografía por Rayos X/métodosRESUMEN
AIM: To compare six reciprocating instruments regarding their geometric design, metallurgical characteristics, mechanical behaviour and ability to prepare root canals. METHODOLOGY: A total of 246 new 25-mm NiTi instruments (41 per group) from six reciprocating systems (Reciproc, Reciproc Blue, One Files, One Files Blue, Reverso Silver, and WaveOne Gold) were evaluated throughout a multimethod approach regarding their design using stereomicroscopy (number of blades and helix angle) and scanning electron microscopy (blades symmetry, cross section and surface finishing), nickel-titanium composition, phase transformation temperatures, mechanical performance (cyclic fatigue, torsional and bending resistance) and unprepared canal surface area on anatomically matched mandibular molars assessed by micro-CT. One-way ANOVA and post hoc Tukey's or Mood's median tests were selected depending on sample distribution with significance level set at 5%. RESULTS: The instruments had similarities regarding their metal composition and unprepared canal area, whilst differences in phase transformation temperatures and geometric design (number of blades, surface finishing and tip geometry) were observed. Overall, no difference was observed regarding the maximum torque values (P > 0.05), whilst One Files (72 s) and One Files Blue (414 s) had the shortest and longest times to fracture, respectively (P < 0.05). Similar angles of rotation were observed in Reciproc (310°), One Files (285°) and Reverso Silver (318°) instruments (P > 0.05), which were significantly lower than Reciproc Blue (492°), One Files Blue (456°) and WaveOne Gold (492°; P < 0.05). Maximum bending load demonstrated that Reciproc Blue (201.3 gf) was significantly more flexible that the other instruments (P < 0.05). CONCLUSION: Although there were similarities in metal composition and percentage of unprepared canal surface, the instruments had differences in the overall geometric design, phase transformation temperatures and in the four mechanical resistance parameters (time to fracture, maximum torque, angle of rotation and maximum bending load).
Asunto(s)
Instrumentos Dentales , Preparación del Conducto Radicular , Diseño de Equipo , Ensayo de Materiales , Estrés MecánicoRESUMEN
AIM: To evaluate the correlation between the volume of dental hard tissues removed and the fracture resistance of mandibular molar teeth with ultraconservative (UltraAC) or traditional (TradAC) access cavity preparations. METHODOLOGY: Sixty recently extracted and intact mandibular first molars were scanned in a microcomputed tomographic (micro-CT) device, anatomically matched and assigned at random to 2 groups (n = 30), according to the access cavity type: UltraAC or TradAC. After access preparation, mesial and distal canals were prepared using Reciproc instruments and a new scan was taken. The volumes of pulp chamber and dental hard tissues in each specimen were measured before and after the experimental procedures, and the percentage volume reduction of hard tissues calculated for the entire tooth and for the crown separately. Teeth were then root filled, restored and subjected to fracture resistance tests in an universal testing machine. The force required to fracture was recorded in Newtons (N). The adherence of the variables to a Gaussian curve was verified using a Shapiro-Wilk test. Skewed data were analysed with nonparametric Wilcoxon signed rank or Spearman correlation tests, whilst the normally distributed data were analysed with a dependent samples Student t-test. Level of significance was set at 5%. RESULTS: Pre-operatively, no difference was observed between groups regarding the volume of pulp canal space or dental hard tissues (P > 0.05). After access preparation, volumes of the removed hard tissues from the entire tooth and from the crown were significantly greater in teeth prepared with TradAC than with UltraAC (P < 0.05). No significant difference was observed in the fracture resistance values between TradAC (902.9 ± 347.8 N) and UltraAC (948.7 ± 405.7 N) groups (P = 0.975). The Spearman test was unable to identify a correlation between fracture resistance and percentage volume of removed dental hard tissues in the entire root (P = 0.525, r = -0.084) or only in the crown (P = 0.152, r = -0.187). CONCLUSION: The volume of hard dental tissues removed, although greater in teeth with TradAC compared to UltraAC, did not correlate with the fracture resistance results, indicating that a minimally invasive access cavity did not increase the resistance of restored mandibular first molars to fracture.
Asunto(s)
Diente Molar , Preparación del Conducto Radicular , Cavidad Pulpar , Dentina , Humanos , Diente Molar/diagnóstico por imagen , Diente Molar/cirugía , Microtomografía por Rayos XRESUMEN
AIM: To conduct a bibliographic analysis of the research studies published in Endodontics using micro-computed tomography (micro-CT) as an analytical tool over a 25-year period. METHODOLOGY: The Web of Science electronic database was accessed, and an advanced search using strict criteria was undertaken from January 1995 to June 2020 for studies in the field of Endodontics that used micro-CT as an analytical tool. A further search was conducted between January and August of 2020 for a combination of specific terms and descriptors. For each selected article, the following parameters were recorded: field of the study, analysed specimen, publication title and year, authorship, journal of publication, institution and country of origin, collaborating institutions and countries, and number of citations. The acquired data were analysed using descriptive statistics and graphical mappings. RESULTS: The screening process identified 877 relevant articles that were classified into 30 thematic categories. The main fields of research were root canal preparation (23.8%), root canal anatomy (17.4%), canal filling (9.2%) and root canal retreatment (7.0%). The most productive half-decade comprised the period of 2015-2019 (n = 513; 58.5%), with the highest number of articles published in 2019 (n = 146; 16.6%). The authors who lead the list as first authors were G De-Deus, A Keles, F Paqué, MA Versiani and Y Gu, respectively, whilst Versiani was the most productive (n = 51). The leading countries regarding the number of studies were Brazil, China and Turkey with 236, 130 and 65 publications, respectively. The University of São Paulo (n = 90; 10.3%) followed by Wuhan University (n = 37; 4.2%) and the University of Zurich (n = 18; 2.1%) were the prominent contributors by producing the largest number of articles, whilst the University of Zurich was the most-cited institution. The selected studies were published in 140 scientific journals, but the Journal of Endodontics and International Endodontic Journal accounted for almost 50% of the publications. CONCLUSION: This bibliometric analysis portrayed an original and comprehensive view on the progress and trends of the use of micro-CT technology in endodontic research, and enabled a deep understanding of the development process in this field over the last 25 years.
Asunto(s)
Bibliometría , Brasil , China , Humanos , Turquía , Microtomografía por Rayos XRESUMEN
AIM: To validate a new method for the evaluation of pulp tissue debridement in the root canals of extracted teeth using an impregnation protocol involving potassium triiodide, a radiocontrast solution known as Lugol's, combined with micro-computed tomographic (micro-CT) imaging. METHODOLOGY: The impact of NaOCl on the radiopacity of Lugol's solution was assessed using a two-fold dilution series of Lugol in distilled water and 5.25% NaOCl, which were then pipetted into transparent dishes and radiographed. To verify the influence of Lugol on the proteolytic effect of NaOCl, a dissolution test was performed using fresh bovine meat. Ten slices did not undergo any tissue processing, whilst twenty slices were fixed in formaldehyde for 24 h. After that, 10 of them were immersed in Lugol for another 24 h. Then, all specimens were placed in NaOCl and the time required for a complete tissue dissolution was recorded. For the last experiments (histological validation and micro-CT assessment), 8 extracted mandibular premolars with formerly vital pulps were immersed in buffered formalin, scanned in a micro-CT device, accessed, immersed in Lugol for 7 days and scanned again. Then, the root canals of 5 teeth were prepared and scanned, and the volume of remaining pulp tissue identified and quantified, whilst 3 teeth were histologically processed. The same specimens were subjected to histological assessment, and the images of the histologic sections were registered with the corresponding micro-CT images to verify whether the pulp tissue in the histological sections matched its counterpart in the Lugol-impregnated tissues identified in the micro-CT slices. RESULTS: There was no discernible effect on radiopacity when NaOCl was mixed with Lugol's solution. Tissue processing did not affect the time required for the complete dissolution of fresh bovine meat. Histological evaluation revealed a correlation between micro-CT and histological images confirming the identification of Lugol-impregnated pulp tissue in micro-CT images. CONCLUSIONS: The radiocontrast Lugol's solution was unaffected by NaOCl and did not interfere with its soft tissue dissolution capability. The impregnation protocol using Lugol's solution allowed the visualization of pulp tissue on the micro-CT images and the identification of pulp remnants after chemical-mechanical canal procedures.
Asunto(s)
Cavidad Pulpar , Preparación del Conducto Radicular , Animales , Bovinos , Desbridamiento , Pulpa Dental , Cavidad Pulpar/diagnóstico por imagen , Microtomografía por Rayos XRESUMEN
AIM: To compare the ProTaper Next (PTN) system with a replica-like and a counterfeit system regarding design, metallurgy, mechanical performance and shaping ability. METHODOLOGY: Replica-like (X-File) and counterfeit (PTN-CF) instruments were compared to the PTN system regarding design (microscopy), phase transformation temperatures (differential scanning calorimetry), nickel-titanium ratio (energy-dispersive X-ray spectroscopy), cyclic fatigue, torsional resistance, bending strength, and untouched canal areas in extracted mandibular molars (micro-CT). anova, post hoc Tukey's and Kruskal-Wallis tests were used according to normality assessment (Shapiro-Wilk test) with the significance level set at 5%. RESULTS: Overall similarities in design and nickel-titanium (Ni/Ti) ratio were observed amongst instruments with the X-File having a smoother surface finish. PTN and PTN-CF had mixed austenite plus R-phase (R-phase start approximately at 45 ºC and near 30 ºC, respectively), whilst X-File instruments were austenitic (R-phase started at approximately at 17 ºC) at room temperature (20 ºC). PTN-CF had the greatest inconsistency in the phase transformation temperatures. Time to fracture of PTN-CF X2 and X3 was significantly shorter than PTN and X-File instruments (P < 0.05), whilst no difference was noted in maximum torque to fracture amongst the tested systems (P > 0.05). X-Files and PTN-CF had a stress-induced phase change during bending load. Mean unprepared surface areas of root canals were 25.8% (PTN), 31.1% (X-File) and 32.5% (PTN-CF) with no significant difference amongst groups (P > 0.05). CONCLUSION: Similarities amongst the systems were noted in the Ni/Ti ratio and maximum torque to fracture, whilst differences were observed in the design, phase transformation temperatures and mechanical behaviour. The ProTaper Next counterfeit instruments could be considered as the less secure system considering its low-cyclic fatigue resistance. Apart from these differences, the unprepared canal surface areas, obtained with the tested systems, were similar.
Asunto(s)
Aleaciones Dentales , Preparación del Conducto Radicular , Diseño de Equipo , Ensayo de Materiales , Metalurgia , Estrés Mecánico , Titanio , Microtomografía por Rayos XRESUMEN
In the last decade, several access cavity designs involveing minimal removal of tooth tissue have been described for gaining entry to pulp chambers during root canal treatment. The premise behind this concept assumes that maximum preservation of as much of the pulp chamber roof as possible during access preparation would maintain the fracture resistance of teeth following root canal treatment. However, the smaller the access cavity, the more difficult it may be to visualize and debride the pulp chamber as well as locate, shape, clean and fill the canals. At the same time, a small access cavity may increase the risk of iatrogenic complications as a result of poor visibility, which may have an impact on treatment outcome. This study aimed to critically analyse the literature on minimal access cavity preparations, propose new nomenclature based on self-explanatory abbreviations and highlight the areas in which more research is required. The search was conducted without restrictions using specifics terms and descriptors in four databases. A complementary screening of the references within the selected studies, as well as a manual search in the highest impact journals in endodontics, namely International Endodontic Journal and Journal of Endodontics, was also performed. The initial search retrieved 1831 publications. The titles and abstracts of these papers were reviewed, and the full text of 94 studies was assessed. Finally, a total of 28 studies were identified as evaluating the influence of minimally invasive access cavity designs on the fracture resistance of teeth and on the different stages of root canal treatment (orifice location, canal shaping, canal cleaning, canal filling and retreatment). Overall, the studies had major methodological drawbacks and reported inadequate and/or inconclusive results on the utility of minimally invasive access preparations. Furthermore, they offered limited scientific evidence to support the use of minimally invasive access cavities to improve the outcome of root canal treatment and retreatment; they also provided little evidence that they preserved the fracture resistance of root filled teeth to a greater extent than traditional access cavity preparations. It was concluded that at present, there is a lack of supporting evidence for the introduction of minimally invasive access cavity preparation into routine clinical practice and/or training of undergraduate and postgraduate students.
Asunto(s)
Endodoncia , Preparación del Conducto Radicular , Preparación de la Cavidad Dental , Cavidad Pulpar , Humanos , Tratamiento del Conducto RadicularRESUMEN
AIM: To introduce a new method to select anatomically matched teeth using micro-computed tomographic (micro-CT) technology. METHODOLOGY: Single-rooted mandibular incisors with a single root canal (n = 60) were selected and distributed into three experimental groups according to the method used for matching 10 pairs of teeth in each group. In group 1, the pairs of mandibular incisors were randomly selected from a pool of teeth. In group 2, teeth were paired based on the measurement of canal width 5 mm from the root apex using radiographs taken from buccolingual and mesiodistal directions. In group 3, teeth were scanned (pixel size of 14.25 µm) and pair-matched based on the anatomical aspects of the root canal, named aspect ratio (AR), volume and three-dimensional canal geometry. After allocating the specimens into groups 1 and 2, the teeth were scanned and the canal morphology evaluated as in group 3. A bivariate Pearson's regression analysis was performed correlating the individual AR values of each pair, and the correlation coefficient was used to estimate the strength of the pair-matching process. One-way anova post hoc Tukey's tests were applied for pairwise comparisons at a significance level of 5%. RESULTS: The micro-CT revealed that 100% of the samples had strong (80%) or very strong (20%) correlations with respect to AR values. Analysis of the radiographic method revealed strong correlation in two pairs (20%), but most of the samples had weak (30%) or negligible (30%) correlation coefficients. The randomization method resulted in three pairs (30%) with very strong correlations, whilst 50% had weak or negligible rates. A significant difference in correlation coefficients was observed in the micro-CT method compared to the other groups (P < 0.05), whilst no difference was detected between radiographic and randomized methods (P > 0.05). Eta-squared (η2 ) calculations demonstrated a very high effect size in the micro-CT group for selecting pairs (0.99) and lower effect sizes in the radiographic (0.67) and randomized (0.66) groups. CONCLUSIONS: Use of Micro-CT was able to provide better control of the confounding effect that anatomical variances in tooth morphology may have on the results in experiments with matched-pair design.
Asunto(s)
Cavidad Pulpar , Tratamiento del Conducto Radicular , Diente Premolar , Incisivo , Microtomografía por Rayos XRESUMEN
AIM: To evaluate, using micro-CT, the remaining dentine thickness after preparation of the mesiobuccal (MB), mesiolingual (ML) and middle mesial (MM) canals of mandibular first molars with the ProTaper Next rotary system. METHODOLOGY: Eleven mesial roots of mandibular first molars having three independent canals from the furcation level up to at least 5 mm towards the apical direction were selected. Preparation of MM canals was performed in two steps using ProTaper Next X2 (step 1) and X3 (step 2) instruments, whilst MB and ML canals were prepared in a single step up to X3 instruments. The roots were scanned (pixel size of 10 µm) before and after each step, and the dentine volume was calculated. Postoperative models of the roots were coregistered with their preoperative dataset and colour-coded cross-sections of the roots were used to measure the smallest dentine thickness surrounding each canal at 1.0-mm intervals from the furcation level up to 5 mm in the apical direction, in both mesial and distal aspects of the roots. Changes in the remaining wall thickness between mesial canals were analysed with repeated-measures anova and post hoc Tukey test. Significance level was set at 5%. RESULTS: Mean percentage reduction of dentine volume after steps 1 and 2 was 4.66% and 5.16%, respectively. Overall, pre- and postoperative dentine thickness of the MM canal walls, in both mesial and distal aspects of the root, were significantly thinner than those of MB and ML canals (P < 0.05). No significant difference was observed when comparing dentine thickness in the mesial and distal directions of MM canal after preparation step 1 (0.88 ± 0.18 mm and 0.73 ± 0.26 mm, respectively) or 2 (0.83 ± 0.17 mm and 0.67 ± 0.26 mm, respectively) (P > 0.05). Dentine thickness values less than 0.5 mm were observed mostly towards the distal aspect of the MM canal. Mesial roots were not associated with strip perforations after canal preparation procedures. CONCLUSIONS: A significant decrease in the thickness of canal walls at all levels evaluated in the mesial roots of mandibular molars suggests that files with small tapers should be used in preference to instruments with large tapers to prepare mesial canals in mandibular molars.
Asunto(s)
Cavidad Pulpar , Mandíbula , Dentina , Diente Molar , Preparación del Conducto Radicular , Microtomografía por Rayos XRESUMEN
BACKGROUND AND AIM: To perform a systematic review of anatomical studies using cone beam computed tomography (CBCT) to assess the influence of demographic factors (age, gender and geographic region) on the prevalence of C-shaped canal anatomy in maxillary molars, mandibular premolars and molars. DATA SOURCES: A search was conducted between May and August 2018 in four electronic databases and five peer-reviewed journals. The authors of included articles were also contacted for additional studies and the bibliographic references hand-searched. STUDY ELIGIBILITY CRITERIA, PARTICIPANTS AND INTERVENTIONS: The research protocol was previously registered in the International Prospective Register of Ongoing Systematic Reviews (CRD42018095201) and included defined inclusion/exclusion criteria. Prevalence studies on C-shaped canal anatomy in maxillary molars, mandibular premolars and molars were searched. STUDY APPRAISAL AND SYNTHESIS METHODS: The selected studies were submitted to full-text analysis and critical appraisal by two evaluators using the Joanna Briggs Institute Critical Appraisal tool. The final group of papers (n = 25) were pooled and forest plots with proportions and odds ratio with a 95% confidence interval performed. Meta-regression was undertaken to evaluate possible sources of heterogeneity and funnel plot visual analysis to assess publication bias. RESULTS: The included studies reported data on 25 445 teeth of 13 142 patients. A significant difference in the average prevalence proportion of C-shaped configuration was observed between mandibular first (0.3%; 0.1-0.6%) and second (12%; 10.3-13.7%) molars (P < 0.05). No significant difference in the prevalence of C-shaped configurations was observed comparing males (13.5%; 8.8-18.3%) and females (20.5%; 13.7-27.4%) in mandibular second molars (P > 0.05), although males were associated with significantly lower odds (0.573; 0.511-0.641) (P < 0.05). The pooled proportion of C-shaped anatomy in mandibular second molars in East Asian countries (39.6%; 36.0-43.1%) was significantly higher compared with other regions. LIMITATIONS: Because of the limited number of studies, no statistical analysis was performed for maxillary molars and mandibular premolars. CONCLUSION: Meta-analysis revealed that gender and geographic region may act as a confounding factor for the prevalence of C-shaped anatomy in mandibular second molars, whilst age did not influence the prevalence of C-shaped configurations in this tooth group. Knowing these preoperative factors would help to anticipate complex morphologies in clinics.
Asunto(s)
Cavidad Pulpar , Raíz del Diente , Tomografía Computarizada de Haz Cónico , Femenino , Humanos , Masculino , Prevalencia , Estudios ProspectivosRESUMEN
AIM: To investigate the smallest dentine thickness in mesial canals of mandibular molars along the cervical and middle thirds of the root by means of a micro-computed tomographic (micro-CT) technology and digital image analysis. METHODOLOGY: Fifty mesial roots of mandibular molars having two independent canals (mesiobuccal and mesiolingual), in the coronal and middle levels, were selected and scanned in a micro-CT device. After reconstruction procedures, approximately 468 slices per root covering the 7 mm below the furcation area of the mesial root were analysed to measure the smallest dentine thickness (danger zone [DZ]) in each slice from both distal and mesial regions of the mesial canals by an automatic segmentation process. RESULTS: The DZ values in the mesiobuccal canals varied from 0.67 to 1.93 mm, with an average of 1.13 ± 0.21 mm. For the mesiolingual canals, the DZ varied from 0.77 to 1.89 mm with an average of 1.10 ± 0.21 mm. There was no correspondence in the DZ between the mesiobuccal and mesiolingual canals at the same cross-sectional level in 71% of the specimens. Moreover, the smallest dentine thickness was towards the mesial region of the roots in 22% and 18% of the mesiolingual and mesiobuccal canals, respectively. (Figs 1 and 2 CONCLUSIONS: The smallest dentine thickness was on the mesial plane of the roots in about 40% of the canals. The vertical location of the DZ in relation to the furcation area was in the middle third of the root.
Asunto(s)
Mandíbula , Diente Molar , Estudios Transversales , Cavidad Pulpar , Dentina , Raíz del Diente , Microtomografía por Rayos XRESUMEN
AIM: To investigate the prevalence, location and pattern of pre-existing microcracks in non-endodontically treated teeth from fresh cadavers. Micro-computed tomography (micro-CT) technology was used as the analytical tool enabling full screening of the root dentine with the teeth retained in their original alveolar socket. METHODOLOGY: As a pilot study and to validate the present method, a series of 4 high-resolution scans were performed on one bone-block specimen with teeth collected post-mortem: (i) entire bone-block including the teeth, (ii) second molar tooth extracted atraumatically from the bone-block, (iii) extracted tooth dehydrated to induce dentinal defects and (iv) entire bone-block following reinsertion of the extracted tooth into its matching alveolar socket. In the main study, forty-two dentoalveolar maxillary and mandibular bone-blocks each containing 3-5 adjacent teeth (a total of 178 teeth) were collected post-mortem and scanned in a micro-CT device. All cross-section images of the 178 teeth (n = 65 530) were screened from the cementoenamel junction to the apex to identify the presence of dentinal defects. RESULTS: In the pilot study, the microcracks observable when the dehydrated tooth was outside the bone-block remained detectable when the entire bone-block plus reinserted tooth was scanned. This means that the screening process revealed the presence of the same microcracks in both experimental situations (the tooth outside and inside the maxillary bone-block). From a total of 178 teeth in the bone-blocks removed from cadavers, 65 530 cross-sectional images were analysed and no dentinal microcracks were detected. CONCLUSIONS: This in situ cadaveric model revealed the lack of pre-existing dentinal microcracks in non-endodontically treated teeth. Thus, the finding of dentinal microcracks observed in previous cross-sectional images of stored extracted teeth is unsound and not valid. It should be assumed that microcracks observed in stored extracted teeth subjected to root canal procedures are a result of the extraction process and/or the post-extraction storage conditions. Therefore, as a consequence, the presence of such dentinal microcracks in stored extracted teeth - observable in cross-sectional images of the roots - should be referred to as experimental dentinal microcracks.
Asunto(s)
Preparación del Conducto Radicular , Raíz del Diente , Estudios Transversales , Dentina , Humanos , Proyectos Piloto , Microtomografía por Rayos XRESUMEN
AIM: To evaluate dentine thickness from both distal ('danger zone') and mesial ('safety zone') aspects of the MB1 and MB2 canals of maxillary first molars at the furcation level using micro-CT imaging. METHODOLOGY: One hundred maxillary first molars with two canals in the MB root were selected from a Brazilian subpopulation and scanned at a resolution of 19.6 µm in a micro-CT device. From each specimen, two axial cross-sectioned images were selected at 2 and 3 mm apical to the furcation level of the MB root and evaluated for the smallest dentinal thickness. Measurements were made from the outer perimeter of the MB1 and MB2 canals towards the external root surface from both distal (danger zone) and mesial (safety zone) aspects of the root. The influence of an isthmus was also considered in the analysis, and samples were classified according to the presence or absence of an isthmus in the axial sections. Non-parametric Wilcoxon signed-rank tests were used to compare dentinal thickness between MB1 and MB2 canals with a significant level set at 5%. Colour-coded 3D models of dentine thickness throughout the MB root were created and evaluated qualitatively. RESULTS: At both levels, median dentine thickness of the MB2 canal was significantly lower in both distal and mesial aspects of the root in comparison with the MB1 canal (P < 0.01). The presence of an isthmus was not a variable that influenced dentinal thickness. Colour-coded models indicated that dentine thickness was dependent on the cross-sectional shape of the MB root. At least 50% of the sample had <1 mm of dentine thickness at the danger zone of the MB2 canal. CONCLUSIONS: Danger zones in the MB roots of maxillary first molars were not symmetrical. MB2 canals had less dentine thickness on both aspects of the root compared to the MB1 canal.
Asunto(s)
Cavidad Pulpar , Maxilar , Brasil , Estudios Transversales , Diente Molar , Raíz del Diente , Microtomografía por Rayos XAsunto(s)
Cavidad Pulpar/anatomía & histología , Cavidad Pulpar/diagnóstico por imagen , Raíz del Diente/anatomía & histología , Raíz del Diente/diagnóstico por imagen , Anatomía/clasificación , Diente Premolar/anatomía & histología , Imagenología Tridimensional/métodos , Incisivo/anatomía & histología , Maxilar , Microtomografía por Rayos X/métodosRESUMEN
AIM: To compare the shaping ability of four root canal instrumentation systems in oval-shaped canals using micro-computed tomographic analysis. METHODOLOGY: Forty anatomically matched mandibular incisors were scanned and assigned to four groups (n = 10), according to the canal preparation protocol: BioRace, Reciproc, Self-Adjusting File (SAF) and TRUShape systems. After canal instrumentation, the specimens were rescanned, and the registered pre- and postoperative datasets were examined to evaluate the percentages of accumulated hard-tissue debris, untouched canal walls and dentine removed. Kruskal-Wallis and Mann-Whitney U-tests with Bonferroni correction were used to compare the variables in the groups (α = 5%). RESULTS: The preparation techniques did not affect the percentage of accumulated hard-tissue debris (P = 0.126). The percentage of untouched canal areas was significantly higher for BioRace (32.38%)compared to Reciproc (18.95%) and SAF (16.08%) systems (P < 0.05). Reciproc removed significantly more dentine (4.18%) than BioRace (2.21%) and SAF (2.56%) (P < 0.05). The TRUShape system had intermediate results for both untouched canal walls (19.20%) and dentine removed (3.77%), with no significant difference compared to BioRace, Reciproc and SAF systems. CONCLUSIONS: The preparation techniques resulted in the same level of accumulated hard-tissue debris. Compared to the other tested systems, BioRace was associated with more untouched canal walls and Reciproc produced the greatest amount of removed dentine. Although it touched more of the root canal walls, the SAF system removed less dentine, whereas TRUShape had intermediate results for these same parameters. None of the systems tested were able to provide optimal shaping ability in oval-shaped canals.
Asunto(s)
Cavidad Pulpar/cirugía , Obturación del Conducto Radicular/instrumentación , Cavidad Pulpar/anatomía & histología , Cavidad Pulpar/diagnóstico por imagen , Humanos , Incisivo/anatomía & histología , Incisivo/cirugía , Maxilar , Microtomografía por Rayos XRESUMEN
AIM: To evaluate the internal and external morphologies of fused-rooted maxillary second molars by means of micro-computed tomography (micro-CT) analysis. METHODOLOGY: A total of 100 fused-rooted maxillary second molars from a Brazilian subpopulation were divided into six groups according to the root morphology. The samples were scanned at a resolution of 19.6 µm and evaluated with regard to the external morphology of the roots, the root canal configuration, the percentage frequency of C-shaped canals and isthmuses, as well as the morphology of the root canal system at 1, 2 and 3 mm from the anatomical apex of the fused roots. RESULTS: The most prevalent root canal fusions were type 1, mesiobuccal root fused with distobuccal root (32%), followed by type 3, DB root fused with P root (27%), and type 4, MB root fused with DB root, and P root fused with MB or DB roots (21%). The prevalence of C-shaped root canal systems were 22%. Depending on the type of root fusion, the percentage frequency of isthmuses in the apical level varied from 9.3% to 42.8%, whilst the presence of apical deltas ranged from 18.5% to 57.1% of teeth. CONCLUSIONS: The root canal system of maxillary second molars with fused roots may have a high incidence of merging canals, isthmuses, apical deltas and C-shaped configurations.
Asunto(s)
Diente Molar/anomalías , Raíz del Diente/anomalías , Humanos , Imagenología Tridimensional , Maxilar , Diente Molar/anatomía & histología , Diente Molar/diagnóstico por imagen , Raíz del Diente/anatomía & histología , Raíz del Diente/diagnóstico por imagen , Microtomografía por Rayos XRESUMEN
AIMS: To compare the accuracy of the clearing technique and cone beam computed tomography (CBCT) in the assessment of root canal configurations using micro-computed tomography (micro-CT) imaging system as the reference standard. METHODOLOGY: Thirty-two mesial roots of mandibular first molars, selected on the basis of micro-CT scans (voxel size: 19.6 µm) and presenting several canal configurations, were evaluated using 2 CBCT scanners (voxels sizes: 120 µm and 150 µm) followed by the clearing technique. Two examiners analysed the data from each method and classified the anatomical configuration of the mesial canal according to Vertucci's system. Data were compared using Fisher's exact and chi-square tests. Reliability for each assessment was verified by the kappa test, and significance level was set at 5%. RESULTS: Kappa value indicated a high level of agreement between the examiners. Detection of type I configurations was significantly lower in cleared teeth (P < 0.05), whilst type II root canals were detected in all specimens by both tests (P > 0.05). In mesial roots with variable anatomical configurations, CBCT and the clearing method were significantly less accurate than the reference standard (P < 0.05). CONCLUSION: Within the tooth population studied, accuracy of identifying mesial root canal configuration was influenced greatly by the evaluation method and the type of anatomy. Detection of type I configurations in cleared teeth was significantly lower, whilst type II configurations were detected in all specimens by both methods. In mesial roots with variable anatomical configurations, neither CBCT nor clearing methods were accurate for detecting the actual root canal anatomy.
Asunto(s)
Cavidad Pulpar/anatomía & histología , Cavidad Pulpar/diagnóstico por imagen , Diente Molar/anatomía & histología , Diente Molar/diagnóstico por imagen , Preparación del Conducto Radicular/métodos , Raíz del Diente/anatomía & histología , Raíz del Diente/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico , Humanos , Mandíbula , Microtomografía por Rayos XRESUMEN
AIM: To evaluate the effect of depth of insertion of an irrigation needle tip on the removal of hard-tissue debris using micro-computed tomographic (micro-CT) imaging. METHODOLOGY: Twenty isthmus-containing mesial roots of mandibular molars were anatomically matched based on similar morphological dimensions using micro-CT evaluation and assigned to two groups (n = 10), according to the depth of the irrigation needle tip during biomechanical preparation: 1 or 5 mm short of the working length (WL). The preparation was performed with Reciproc R25 file (tip size 25, .08 taper) and 5.25% NaOCl as irrigant. The final rinse was 17% EDTA followed by bidistilled water. Then, specimens were scanned again, and the matched images of the canals, before and after preparation, were examined to quantify the amount of hard-tissue debris, expressed as the percentage volume of the initial root canal volume. Data were compared statistically using the Mann-Whitney U-test. RESULTS: None of the tested needle insertion depths yielded root canals completely free from hard-tissue debris. The insertion depth exerted a significant influence on debris removal, with a significant reduction in the percentage volume of hard-tissue debris when the needle was inserted 1 mm short of the WL (P < 0.05). CONCLUSIONS: The insertion depth of irrigation needles significantly influenced the removal of hard-tissue debris. A needle tip positioned 1 mm short of the WL resulted in percentage levels of hard-tissue debris removal almost three times higher than when positioned 5 mm from the WL.