RESUMEN
We demonstrate the application of proton transfer time-of-flight mass spectrometry (PTR-TOF-MS) in monitoring the kinetics of disinfectant decay in water with a sensitivity one to three orders of magnitude greater than other analytical methods. Chemical disinfection inactivates pathogens during water treatment and prevents regrowth as water is conveyed in distribution system pipes, but it also causes formation of toxic disinfection by-products. Analytical limits have hindered kinetic models, which aid in ensuring water quality and protecting public health by predicting disinfection by-products formation. PTR-TOF-MS, designed for measuring gas phase concentrations of organic compounds, was able to simultaneously monitor aqueous concentrations of five inorganic haloamines relevant to chloramine disinfection under drinking water relevant concentrations. This novel application to aqueous analytes opens a new range of applications for PTR-TOF-MS.
RESUMEN
In drinking water distribution systems, including premise plumbing, dissolved oxygen (DO) and free chlorine (FC) are common oxidants and ductile iron (DI) and copper (Cu) are commonly used pipe materials. Microelectrodes as a tool have been applied in previous corrosion research and were used in this study to collect quantifiable data and understand DO and FC reactivity and pH changes at the water-metal interface. Using microelectrodes, pH, DO, and FC profiles from the bulk water to near and at the surface of aged DI (154-190 d) and Cu (2 d and 86-156 d) coupons were investigated during periods of flow and stagnation (30 min). Using the measured microelectrode profiles, oxidant fluxes and apparent surface reaction rate constants were calculated to elucidate differences between DO and FC reactivity with the coupons. Microelectrodes were successfully applied to measure pH, DO, and FC profiles from the bulk water to near aged DI and Cu coupon surfaces; Cu coupons aged quickly and exhibited less reactivity at 2 d with DO and FC than aged DI coupons did after 154-190 d; and for the aged DI coupon experiments, orthophosphate presence stabilized pH profiles where without orthophosphate pH fluctuations of greater than 2 pH units occurred from the bulk water to the DI coupon surface.
RESUMEN
In drinking water chloramination, monochloramine autodecomposition occurs in the presence of excess free ammonia through dichloramine, the decay of which was implicated in N-nitrosodimethylamine (NDMA) formation by (i) dichloramine hydrolysis to nitroxyl which reacts with itself to nitrous oxide (N2O), (ii) nitroxyl reaction with dissolved oxygen (DO) to peroxynitrite or mono/dichloramine to nitrogen gas (N2), and (iii) peroxynitrite reaction with total dimethylamine (TOTDMA) to NDMA or decomposition to nitrite/nitrate. Here, the yields of nitrogen and oxygen-containing end-products were quantified at pH 9 from NHCl2 decomposition at 200, 400, or 800 µeq Cl2·L-1 with and without 10 µM-N TOTDMA under ambient DO (â¼500 µM-O) and, to limit peroxynitrite formation, low DO (≤40 µM-O). Without TOTDMA, the sum of free ammonia, monochloramine, dichloramine, N2, N2O, nitrite, and nitrate indicated nitrogen recoveries ±95% confidence intervals were not significantly different under ambient (90 ± 6%) and low (93 ± 7%) DO. With TOTDMA, nitrogen recoveries were less under ambient (82 ± 5%) than low (97 ± 7%) DO. Oxygen recoveries under ambient DO were 88-97%, and the so-called unidentified product of dichloramine decomposition formed at about three-fold greater concentration under ambient compared to low DO, like NDMA, consistent with a DO limitation. Unidentified product formation stemmed from peroxynitrite decomposition products reacting with mono/dichloramine. For a 2:2:1 nitrogen/oxygen/chlorine atom ratio and its estimated molar absorptivity, unidentified product inclusion with uncertainty may close oxygen recoveries and increase nitrogen recoveries to 98% (ambient DO) and 100% (low DO).
Asunto(s)
Óxidos de Nitrógeno , Oxígeno , Purificación del Agua , Nitrógeno , Nitritos/química , Nitratos/química , Amoníaco/química , Especies de Nitrógeno Reactivo , Ácido Peroxinitroso , Cloraminas/química , Dimetilnitrosamina/químicaRESUMEN
Thirty-two short term (â¼7.5 h) abiotic experiments were conducted with new ductile iron and copper coupons exposed to various water qualities, including pH (7 or 9), dissolved inorganic carbon (DIC, 10 or 50 mg C L-1) and phosphate (0 or 3 mg P L-1) concentrations and 4 mg Cl2 L-1 free chlorine or monochloramine. To quantify oxidant reactivity with the new metal coupons, microelectrodes were used to obtain oxidant (free chlorine or monochloramine and dissolved oxygen (DO)) concentration and pH microprofiles from the bulk water to near the metal coupon surface. From the microprofiles, apparent surface reaction rate constants (k) were determined for each oxidant. An ANOVA analysis evaluated if the five variables (Material, Oxidant, Phosphate, DIC, and pH) significantly affected estimates of k, finding that the Material and Oxidant variables and their interaction were statistically significant (p<0.05), but the effect of variables of Phosphate, DIC, and pH on k values were not significant in this study. In general, both ductile iron and copper coupons showed significant surface reactivity towards free chlorine and monochloramine. For ductile iron, DO consumption was greater than for copper, which showed minimal DO reactivity, and DO was less reactive towards the copper surface than either free chlorine or monochloramine. Furthermore, pH microprofiles provided insight into the complexity that might exist near corroding metal surfaces where the bulk water pH may be substantially different from that measured near metal surfaces which is significant as pH is a controlling variable in terms of scale formation and metal solubility. This study represents an important first step towards using microelectrodes to (1) understand and provide direct measurement of oxidant microprofiles from the bulk water to the metal surface; (2) determine pipe wall reactivity using the directly measured concentrations profiles versus estimated pipe wall reactivity from bulk water measurements, and (3) understand how variables measured by bulk water samples (e.g., pH) may be drastically different from what is occurring at and near the metal surface. Together, these insights will assist in understanding disinfectant residual maintenance, corrosion, and metal release.
Asunto(s)
Cobre , Abastecimiento de Agua , Hierro , Oxidantes , Cloro , Microelectrodos , Agua , Cloruros , Concentración de Iones de Hidrógeno , CorrosiónRESUMEN
Mass transport in diffusive gradients in thin-film passive samplers is restricted to diffusion through a gel layer of agarose or agarose cross-linked polyacrylamide (APA). The gel layer diffusion coefficient, DGel, is typically determined using a standard analysis (SA) based on Fick's first law from two-compartment diffusion cell (D-Cell) tests. The SA assumes pseudo-steady-state flux, characterized by linear sink mass accumulation-time profiles with a typical threshold R2 ≥ 0.97. In 72 D-Cell tests with nitrate, 63 met this threshold, but the SA-determined DGel ranged from 10.1 to 15.8 × 10-6 cm2·s-1 (agarose) and 9.5 to 14.7 × 10-6 cm2·s-1 (APA). A regression model developed with the SA to account for the diffusive boundary layer had 95% confidence intervals (CIs) on DGel of 13 to 18 × 10-6 cm2·s-1 (agarose) and 12 to 19 × 10-6 cm2·s-1 (APA) at 500 rpm. A finite difference model (FDM) developed based on Fick's second law with non-steady-state (N-SS) flux decreased uncertainty in DGel tenfold. The FDM-captured decreasing source compartment concentrations and N-SS flux in the D-Cell tests and, at 500 rpm, the FDM-determined DGel ± 95% CIs were 14.5 ± 0.2 × 10-6 cm2·s-1 (agarose) and 14.0 ± 0.3 × 10-6 cm2·s-1 (APA), respectively.
Asunto(s)
Monitoreo del Ambiente , Contaminantes Químicos del Agua , Sefarosa , Incertidumbre , Contaminantes Químicos del Agua/análisis , DifusiónRESUMEN
A coconut shell (AC1230CX) and a bituminous coal based (F400) granular activated carbon (GAC) were ground with mortar and pestle (MP), a blender, and a bench-scale ball milling unit (BMU). Blender was the most time-efficient for particle size reduction. Four size fractions ranging from 20 × 40 to 200 × 325 were characterized along with the bulk GACs. Compared to bulk GACs, F400 blender and BMU 20 × 40 fractions decreased in specific surface area (SSA, -23% and -31%, respectively) while smaller variations (-14% to 5%) occurred randomly for AC1230CX ground fractions. For F400, the blender and BMU size fraction dependencies were attributed to the combination of (i) radial trends in the F400 particle properties and (ii) importance of shear (outer layer removal) versus shock (particle fracturing) size reduction mechanisms. Compared to bulk GACs, surface oxygen content (At%-O1s) increased up to 34% for the F400 blender and BMU 20 × 40 fractions, whereas all AC1230CX ground fractions, except for the blender 100 × 200 and BMU 60 × 100 and 100 × 200 fractions, showed 25-29% consistent increases. The At%-O1s gain was attributed to (i) radial trends in F400 properties and (ii) oxidization during grinding, both of which supported the shear mechanism of mechanical grinding. Relatively small to insignificant changes in point of zero charge (pHPZC) and crystalline structure showed similar trends with the changes in SSA and At%-O1s. The study findings provide guidance for informed selection of grinding methods based on GAC type and target particle sizes to improve the representativeness of adsorption studies conducted with ground GAC, such as rapid small-scale column tests. When GACs have radial trends in their properties and when the target size fraction only includes larger particle sizes, manual grinding is recommended.
RESUMEN
When implementing anion exchange (AEX) for per- and polyfluoroalkyl substances treatment, temporal drinking water quality changes from concurrent inorganic anion (IA) removal can create unintended consequences (e.g., corrosion control impacts). To understand potential effects, four drinking water-relevant IAs (bicarbonate, chloride, sulfate, and nitrate) and three gel-type, strong-base AEX resins were evaluated. Batch binary isotherm experiments provided estimates of IA selectivity with respect to chloride ( K x ∕ C ) for IA/resin combinations where bicarbonate < sulfate ≤ nitrate at studied conditions. A multi-IA batch experiment demonstrated that binary isotherm-determined K x ∕ C values predicted competitive behavior. Subsequent column experiments with and without natural organic matter (NOM) allowed for the validation of a new ion exchange column model (IEX-CM; https://github.com/USEPA/Water_Treatment_Models). IA breakthrough was well-simulated using binary isotherm-determined K x ∕ C values and was minimally impacted by NOM. Initial AEX effluent water quality changes with corrosion implications included increased chloride and decreased sulfate and bicarbonate concentrations, resulting in elevated chloride-to-sulfate mass ratios (CSMRs) and Larson ratios (LRs) and depressed pH until the complete breakthrough of the relevant IA(s). IEX-CM utility was further illustrated by simulating the treatment of low-IA source water and a change in the source water to understand the resulting duration of changes in IAs and water quality parameters.
RESUMEN
Nitrite (NO2-) production in chloraminated drinking water distribution systems (CDWDSs) is among the first bulk water indicators of a nitrification event and is typically quantified using ion chromatography (IC) or colorimetric techniques. NO2- can also be quantified using chemometric models (CMs) formulated using molar absorptivity (Æ) and/or ultraviolet absorbance (UVA) spectra, but concerns exist regarding their accuracy and generalizability because of varying source water natural organic matter (NOM), monochloramine (NH2Cl), bromide (Br-), and other species in CDWDSs. We demonstrate that the impact of NOM was mitigated in the second derivative molar absorptivity (Æâ³) and UVA spectra (UVAâ³) between 200-300 nm and developed a generalizable CM for NO2- quantification. The Æâ³+UVAâ³ CM was calibrated with daily NO2- measurements by IC from five biofilm annular reactor (BAR) tests with feedwater from Fayetteville, Arkansas, USA (FAY1, n = 275) and validated with eight BAR tests (n = 376) with another Fayetteville water (FAY2) and two waters from Dallas, Texas, USA (DAL1 and DAL2). The Æâ³+UVAâ³ CM used Æâ³ for NO2-, nitrate (NO3-), Br-, and NH2Cl at wavelengths of 213-, 225-, 229- and 253 nm, had an adjusted R2 of 0.992 for FAY1 and 0.987 for the other waters, and had a method detection limit (MDL) of 0.050 mg·L-1-N. NO2- challenge samples with three reconstituted NOM types and Br- indicated the Æâ³+UVAâ³ CM was generalizable at NOM concentrations like those in the BAR tests (≤ 2.5 mg·L-1-C). The Æâ³+UVAâ³ CM accurately simulated NO2- in field tests from two CDWDSs undergoing nitrification, including one with NOM at 3.5 mg·L-1-C, illustrating a practical application of the CM for identifying biological ammonia oxidation.
Asunto(s)
Agua Potable , Nitritos , Quimiometría , Dióxido de Nitrógeno , NitratosRESUMEN
Selectivity with respect to chloride (KPFAS∕C) was determined for nine drinking water relevant perfluoroalkyl and polyfluoroalkyl substances (PFAS): perfluoro-2-propoxypropanoic acid (GenX), five perfluoroalkyl carboxylic acids (PFCAs), and three perfluoroalkyl sulfonic acids (PFSAs). Three single-use strong base anion exchange gel resins were investigated, targeting drinking water relevant equilibrium PFAS liquid concentrations (≤500 ng/L). Except for the longest carbon chain PFCA (perfluorodecanoic acid) and PFSA (perfluorooctanesulfonic acid) studied, PFAS followed traditional ion exchange theory (law of mass action), including increasing equilibrium PFAS liquid concentrations with increasing equilibrium chloride liquid concentrations. Overall, KPFAS∕C values were (i) similar among resins for a given PFAS, (ii) 1-5 orders of magnitude greater than the selectivity of inorganic anions (e.g., nitrate) previously studied, (iii) 2 orders of magnitude greater for the same carbon chain length PFSA versus PFCA, (iv) found to proportionally increase with carbon chain length for both PFSAs and PFCAs, and (v) similar for GenX and perfluorohexanoic acid (six-carbon PFCA). A multisolute competition experiment demonstrated binary isotherm-determined KPFAS∕C values could be applied to simulate a multisolute system, extending work previously done with only inorganic anions to PFAS. Ultimately, estimated KPFAS∕C values allow future extension and validation of an open-source anion exchange column model to PFAS.
RESUMEN
The chloramination of bromide containing waters results in the formation of bromine containing haloamines: monobromamine (NH2Br), dibromamine (NHBr2), and bromochloramine (NHBrCl). Many studies have directly shown that bromamines are more reactive than chloramines in oxidation and substitution reactions with organic water constituents because the bromine atom in oxidants is more labile than the chlorine atom. However, similar studies have not been performed with NHBrCl. It has been assumed that NHBrCl has similar reactivity as bromamines with organic constituents in both oxidation and substitution reactions because NHBrCl, like bromamines, rapidly oxidizes N,N-diethyl-p-phenylenediamine. In this study, we examined the reactivity of NHBrCl with phenol red to determine if NHBrCl reacts as readily as bromamines in an isolated substitution reaction. NHBrCl was synthesized two ways to assess whether NHBrCl or the highly reactive intermediates, bromine chloride (BrCl) and molecular bromine (Br2), were responsible for bromine substitution of phenol red. NHBrCl was found to be much less reactive than bromamines with phenol red and that BrCl and Br2 appeared to be the true brominating agents in solutions where NHBrCl is formed. This work highlights the need to reexamine what the true brominating agents are in chloraminated waters containing bromide.
RESUMEN
To evaluate natural organic matter (NOM) processing impacts on preformed monochloramine (PM) reactivity and as a first step in creating concentrated disinfection byproduct (DBP) mixtures from PM, a rational methodology was developed to proportionally scale PM NOM-related demand in unconcentrated source waters to waters with concentrated NOM. Multiple NOM preparations were evaluated, including a liquid concentrate and reconstituted lyophilized solid material. Published kinetic models were evaluated and used to develop a focused reaction scheme (FRS) that was relatively simple to implement and focused on monochloramine loss, including considerations for inorganic chloramine stability (i.e., autodecomposition) and bromide and iodide impacts. The FRS included critical reaction pathways and accurately simulated (without modification) monochloramine experimental data with and without bromide and iodide present over a range of PM-dosed NOM-free waters. For NOM-containing waters, addition of two NOM reactions in the FRS allowed (i) apportioning monochloramine loss to either inorganic or NOM-related reactions and (ii) selecting experiment conditions to provide an equivalent monochloramine NOM-related demand in unconcentrated and concentrated waters. The methodology provides a framework for future experimentation to evaluate DBP scaling and their speciation in concentrated water matrices when providing an equivalent NOM-related monochloramine demand in unconcentrated and concentrated matrices.
RESUMEN
Four chloraminated drinking water distribution systems (CDWDSs) required to maintain numeric versus "detectable" residuals were spatially and temporally sampled for water quality and associated trihalomethane (THM) and haloacetic acid (HAA) formation. Monochloramine decreased from entry point (EP) to maximum residence time (MRT) samples while THMs and HAAs initially increased and then stabilized or slightly decreased. Subsequently, EP and MRT samples were used in laboratory-held studies to further evaluate disinfectant residual stability, chloramine speciation, and nitrification occurrence. MRT water exhibited a faster monochloramine concentration decline compared to EP water, indicating a decreasing disinfectant residual stability from increasing water age through distribution. Using a simple technique based on published inorganic chloramine chemistry, samples were also investigated for nondisinfectant positive interference (NDPI) on total chlorine measurements. NDPI concentrations represented up to 100% of the total chlorine concentration when total chlorine concentrations decreased to 0.05 mg-Cl2/L, indicating little to no effective disinfectant residual remained.
RESUMEN
A theoretical equilibrium lead(II) (Pb(II)) solubility model coded in Fortran (LEADSOL) was updated and implemented in open source R code, verified against LEADSOL output, and used to simulate theoretical equilibrium total soluble Pb(II) (TOTSOLPb) concentrations under a variety of practical scenarios. The developed R code file (app.R) is publicly available for download at GitHub (https://github.com/USEPA/TELSS) along with instructions to run the R code locally, allowing the user to explore Pb(II) solubility by selecting desired simulation conditions (e.g., water quality, equilibrium constants, and Pb(II) solids to consider). In addition, the R code serves as a reproducible baseline for alternative model development and future model improvements, allowing users to update, modify, and share the R code to meet their needs. Using the R code, several solubility diagrams were generated to highlight practical relationships related to TOTSOLPb concentrations, including the impact of pH and dissolved inorganic carbon, orthophosphate, sulfate, and chloride concentrations.
RESUMEN
To assess the practical implications of various bottle materials used in anion exchange (IX) or granular activated carbon (GAC) isotherm experiments, adsorption of seven per- and polyfluoroalkyl substances (PFAS) onto three common bottle materials (silanized glass, polypropylene, and high-density polyethylene [HDPE]) were screened. Results were similar between bottle materials; therefore, only HDPE was used in a detailed bottle material isotherm study with 11 PFAS. For each PFAS, an HDPE bottle isotherm was generated with equilibrium liquid phase concentrations relevant to drinking water (<2000 ng/L). Percent PFAS recoveries between 90% and 103%, 85% and 114%, and 54% and 108% were determined for perfluoro-2-propoxypropanoic acid (GenX), five perfluoroalkyl carboxylic acids, and five perfluoroalkyl sulfonic acids (PFSA), respectively. These results indicated only the five PFSA adsorbed to the HDPE bottles in a concentration-dependent manner. Furthermore, linear isomer versions of two PFSA exhibited greater adsorption. For each PFSA studied, a linear isotherm was generated and used to develop guidance for conducting future IX and GAC isotherm studies. Specifically, the minimum initial isotherm concentration was established such that a maximum 1% loss would be expected to the HDPE bottles, resulting in required initial concentrations of the five PFSA between 21 and 75 times that of the design isotherm liquid equilibrium concentration.
RESUMEN
Chloramine is a secondary disinfectant used to maintain microbial control throughout public water distribution systems. This study investigated the relationship between chloramine concentration, heterotrophic bacteria, and specific Mycobacterium species. Sixty-four water samples were collected at four locations within the utility's distribution network on four occasions. Water samples were analyzed for total chlorine and monochloramine. Traditional culture methods were applied for heterotrophic bacteria and nontuberculous mycobacteria (NTM), and specific quantitative polymerase chain reaction (qPCR) assays were used to detect and quantify Mycobacterium avium, M. intracellulare, and M. abscessus. Total chlorine and monochloramine concentrations decreased between the distribution entry point (4.7 mg/L and 3.4 mg/L as Cl2, respectively) to the maximum residence time location (1.7 mg/L and 1.1 mg/L as Cl2, respectively). Results showed that heterotrophic bacteria and NTM counts increased by two logs as the water reached the average residence time (ART) location. Microbiological detection frequencies among all samples were: 86% NTMs, 66% heterotrophic bacteria, 64% M. abscessus, 48% M. intracellulare, and 2% M. avium. This study shows that heterotrophic bacteria and NTM are weakly correlated with disinfectant residual concentration, R2=0.18 and R2=0.04, respectively. Considering that specific NTMs have significant human health effects, these data fill a critical knowledge gap regarding chloramine's impact on heterotrophic bacteria and Mycobacterial species survival within public drinking water distribution systems.
Asunto(s)
Agua Potable , Mycobacterium , Cloraminas , Desinfección , HumanosRESUMEN
Water-based opportunistic pathogens (OPs) are a leading cause of drinking-water-related disease outbreaks, especially in developed countries such as the United States (US). Physicochemical water quality parameters, especially disinfectant residuals, control the (re)growth, presence, colonization, and concentrations of OPs in drinking water distribution systems (DWDSs), while the relationship between OPs and those parameters remain unclear. This study aimed to quantify how physicochemical parameters, mainly monochloramine residual concentration, hydraulic residence time (HRT), and seasonality, affected the occurrence and concentrations of four common OPs (Legionella, Mycobacterium, Pseudomonas, and Vermamoeba vermiformis) in four full-scale DWDSs in the US. Legionella as a dominant OP occurred in 93.8% of the 64 sampling events and had a mean density of 4.27 × 105 genome copies per liter. Legionella positively correlated with Mycobacterium, Pseudomonas, and total bacteria. Multiple regression with data from the four DWDSs showed that Legionella had significant correlations with total chlorine residual level, free ammonia concentration, and trihalomethane concentration. Therefore, Legionella is a promising indicator of water-based OPs, reflecting microbial water quality in chloraminated DWDSs. The OP concentrations had strong seasonal variations and peaked in winter and/or spring possibly because of reduced water usage (i.e., increased water stagnation or HRT) during cold seasons. The OP concentrations generally increased with HRT presumably because of disinfectant residual decay, indicating the importance of well-maintaining disinfectant residuals in DWDSs for OP control. The concentrations of Mycobacterium, Pseudomonas, and V. vermiformis were significantly associated with total chlorine residual concentration, free ammonia concentration, and pH and trihalomethane concentration, respectively. Overall, this study demonstrates how the significant spatiotemporal variations of OP concentrations in chloraminated DWDSs correlated with critical physicochemical water quality parameters such as disinfectant residual levels. This work also indicates that Legionella is a promising indicator of OPs and microbial water quality in chloraminated DWDSs.
Asunto(s)
Agua Potable , Legionella , Mycobacterium , Cloro , Agua Potable/análisis , Microbiología del AguaRESUMEN
Sediment accumulation in drinking water storage facilities may lead to water quality degradation, including biological growth and disinfectant decay. The current research evaluated the microbiome present in a sediment after sequential exposure to monochloramine, free chlorine, and monochloramine. Chemical profiles within the sediment based on microelectrodes showed evidence of nitrification, and monochloramine slowly penetrated the sediment but was not measurable at lower depths. A metagenomic approach was used to characterize the microbial communities and functional potential of top (0-1 cm) and bottom (1-2 cm) layers in sediment cores. Differential abundance analysis revealed both an enrichment and depletion associated with depth of microbial populations. We assembled 30 metagenome-assembled genomes (MAGs) representing bacterial and archaeal microorganisms. Most metabolic functions were represented in both layers, suggesting the capability of the microbiomes to respond to environmental fluctuations. However, niche-specific abundance differences were identified in biotransformation processes (e.g., nitrogen). Metagenome-level analyses indicated that nitrification and denitrification can potentially occur simultaneously in the sediments, but the exact location of their occurrence within the sediment will depend on the localized physicochemical conditions. Even though monochloramine was maintained in the bulk water there was limited penetration into the sediment, and the microbial community remained functionally diverse and active.
RESUMEN
Hard water and elevated ammonia are problems for many United States groundwater drinking water utilities, and some utilities, particularly those in the Midwest, face both challenges. Ion (cation) exchange (IX) is a common treatment technique for hardness reduction (i.e., softening) and may be used to remove ammonia as well, but these constituents may compete in IX and impact overall treatment performance. Few data have been reported on the impact on ammonia concentrations when using IX for softening in full-scale systems. This study investigated four full-scale groundwater treatment plants in Illinois that practice IX for softening (raw water hardness > 220 mg/L as CaCO3) and have elevated groundwater ammonia concentrations (> 2 mg N/L). Sampling throughout the year revealed consistent finished water hardness levels but variable ammonia concentrations. Ammonia removal varied and depended on how much water had been treated since the last regeneration. High ammonia removal (sometimes > 90%) occurred in the first half of the IX service cycle, while effluent ammonia concentrations increased compared to the influent (sometimes > 200%) towards the end of the IX cycle (total length 50,000-92,000 gallons [190-350 m3]). Ammonia removal efficiency varied among the plants, but the overall trends were similar. Because variable ammonia concentrations may make it difficult to produce a consistent total chlorine residual, they can negatively impact disinfection and water quality in the distribution system. Ammonia concentrations should be considered when designing softening systems to determine regeneration frequency, develop blending strategies, or include an alternative ammonia treatment process before IX softening to produce a more stable and consistent finished water.
Asunto(s)
Agua Potable , Contaminantes Químicos del Agua , Purificación del Agua , Amoníaco , Intercambio Iónico , Calidad del Agua , Ablandamiento del AguaRESUMEN
Per- and polyfluoroalkyl substances (PFAS) are receiving a great deal of attention from regulators, water utilities, and the general public. Anion-exchange resins have shown high capacities for removal of these substances from water, but there is currently a paucity of ion-exchange treatment models available to evaluate performance. In this work, important theoretical and practical considerations are discussed for modeling PFAS removal from drinking water using gel-type, strong-base anion-exchange resin in batch and column processes. Several important limitations found in the literature preclude movement toward model development, including the use of inappropriate isotherms, inappropriate kinetic assumptions, and experimental conditions that are not relevant to drinking water conditions. Theoretical considerations based on ion-exchange fundamentals are presented that will be of assistance to future researchers in developing models, designing batch and column experiments, and interpreting results of batch and column experiments.
RESUMEN
A commercial colorimetric indophenol (IP) method is used for determining monochloramine (NH2Cl) concentrations for process control in chloraminated public water systems and chloramine-related research. The NH2Cl - IP method excludes some quality control procedures typically included in drinking water methods and is not approved by the United States Environmental Protection Agency (U.S. EPA) for compliance monitoring. Therefore, the authors developed and validated a more complete NH2Cl-IP method, building on the commercial technique, as a candidate for future approval. During method development, temperature impact on color development was investigated. Color development time increased as temperature decreased. Below 20 °C, times needed for full color development were greater than those reported in the commercial method, reaching nearly three times longer at 5 °C. This observed temperature dependence also applies to free ammonia and free chlorine indophenol methods. To avoid measurement errors of samples analyzed below 20 °C, use of reaction times determined in this study is recommended for these indophenol methods.