RESUMEN
The manipulation of spin-phonon coupling in both formations and explorations of magnetism in two-dimensional van der Waals ferromagnetic semiconductors facilitates unprecedented prospects for spintronic devices. The interlayer engineering with spin-phonon coupling promises controllable magnetism via organic cation intercalation. Here, spectroscopic evidence reveals the intercalation effect on the intrinsic magnetic and electronic transitions in quasi-two-dimensional Cr2Ge2Te6 using tetrabutyl ammonium (TBA+) as the intercalant. The temperature evolution of Raman modes, Eg3 and Ag1, along with the magnetization measurements, unambiguously captures the enhancement of the ferromagnetic Curie temperature in the intercalated heterostructure. Moreover, the Eg4 mode highlights the increased effect of spin-phonon interaction in magnetic-order-induced lattice distortion. Combined with the first-principle calculations, we observed a substantial number of electrons transferred from TBA+ to Cr through the interface. The interplay between spin-phonon coupling and magnetic ordering in van der Waals magnets appeals for further understanding of the manipulation of magnetism in layered heterostructures.
RESUMEN
Chemical vapour deposition (CVD) synthesis of graphene on copper has been broadly adopted since the first demonstration of this process1. However, widespread use of CVD-grown graphene for basic science and applications has been hindered by challenges with reproducibility2 and quality3. Here we identify trace oxygen as a key factor determining the growth trajectory and quality for graphene grown by low-pressure CVD. Oxygen-free chemical vapour deposition (OF-CVD) synthesis is fast and highly reproducible, with kinetics that can be described by a compact model, whereas adding trace oxygen leads to suppressed nucleation and slower/incomplete growth. Oxygen affects graphene quality as assessed by surface contamination, emergence of the Raman D peak and decrease in electrical conductivity. Epitaxial graphene grown in oxygen-free conditions is contamination-free and shows no detectable D peak. After dry transfer and boron nitride encapsulation, it shows room-temperature electrical-transport behaviour close to that of exfoliated graphene. A graphite-gated device shows well-developed integer and fractional quantum Hall effects. By highlighting the importance of eliminating trace oxygen, this work provides guidance for future CVD system design and operation. The increased reproducibility and quality afforded by OF-CVD synthesis will broadly influence basic research and applications of graphene.
RESUMEN
An international hybrid meeting held 21-22 June 2023 in Ottawa, Canada brought together regulators, scientists, and industry experts to discuss a set of principles and best practices in the development and implementation of standards. Although the use of international standards (ISs) and international units (IUs) has been an essential part of ensuring human and animal vaccine quality in the past decades, the types and uses of standards have expanded with technological advances in manufacture and testing of vaccines. The needs of stakeholders are evolving in response to the ever-increasing complexity, diversity, and number of vaccine products as well as increasing efforts to replace animal-based potency tests with in vitro assays that measure relevant quality attributes. As such, there must be a concomitant evolution in the design and implementation of both international and in-house standards. Concomitantly, greater harmonization of regulatory expectations must be achieved through collaboration with standard-setting organizations, national control laboratories and manufacturers. Stakeholders provided perspectives on challenges and several recommendations emerged as essential to advancing agreed upon objectives.
Asunto(s)
Control de Calidad , Vacunas , Humanos , Vacunas/normas , Animales , Canadá , Estándares de ReferenciaRESUMEN
Shell-isolated nanoparticle enhanced Raman spectroscopy (SHINERS) and density functional theory (DFT) are used to probe Cl- adsorption and the order-disorder phase transition associated with the c(2 × 2) Cl- adlayer on Cu(100) in acid media. A two-component ν(Cu-Cl) vibrational band centered near 260 ± 1 cm-1 is used to track the potential dependence of Cl- adsorption. The potential dependence of the dominant 260 cm-1 component tracks the coverage of the fluctional c(2 × 2) Cl- phase on terraces in good agreement with the normalized intensity of the c(2 × 2) superstructure rods in prior surface X-ray diffraction (SXRD) studies. As the c(2 × 2) Cl- coverage approaches saturation, a second ν(Cu-Cl) component mode emerges between 290 and 300 cm-1 that coincides with the onset and stiffening of step faceting where Cl- occupies the threefold hollow sites to stabilize the metal kink saturated Cu <100> step edge. The formation of the c(2 × 2) Cl- adlayer is accompanied by the strengthening of ν(O-H) stretching modes in the adjacent non-hydrogen-bonded water at 3600 cm-1 and an increase in hydronium concentration evident in the flanking H2O modes at 3100 cm-1. The polarization of the water molecules and enrichment of hydronium arise from the combination of Cl- anionic character and lateral templating provided by the c(2 × 2) adlayer, consistent with SXRD studies. At negative potentials, Cl- desorption occurs followed by development of a sulfate νs(SâO) band. Below -1.1 V vs Hg/HgSO4, a new 200 cm-1 mode emerges congruent with hydride formation and surface reconstruction reported in electrochemical scanning tunneling microscopy studies.
RESUMEN
INTRODUCTION: Pathologic response has been proposed as an early clinical trial end point of survival after neoadjuvant treatment in clinical trials of NSCLC. The International Association for the Study of Lung Cancer (IASLC) published recommendations for pathologic evaluation of resected lung cancers after neoadjuvant therapy. The aim of this study was to assess pathologic response interobserver reproducibility using IASLC criteria. METHODS: An international panel of 11 pulmonary pathologists reviewed hematoxylin and eosin-stained slides from the lung tumors of resected NSCLC from 84 patients who received neoadjuvant immune checkpoint inhibitors in six clinical trials. Pathologic response was assessed for percent viable tumor, necrosis, and stroma. For each slide, tumor bed area was measured microscopically, and pre-embedded formulas calculated unweighted and weighted major pathologic response (MPR) averages to reflect variable tumor bed proportion. RESULTS: Unanimous agreement among pathologists for MPR was observed in 68 patients (81%), and inter-rater agreement (IRA) was 0.84 (95% confidence interval [CI]: 0.76-0.92) and 0.86 (95% CI: 0.79-0.93) for unweighted and weighted averages, respectively. Overall, unweighted and weighted methods did not reveal significant differences in the classification of MPR. The highest concordance by both methods was observed for cases with more than 95% viable tumor (IRA = 0.98, 95% CI: 0.96-1) and 0% viable tumor (IRA = 0.94, 95% CI: 0.89-0.98). The most common reasons for discrepancies included interpretations of tumor bed, presence of prominent stromal inflammation, distinction between reactive and neoplastic pneumocytes, and assessment of invasive mucinous adenocarcinoma. CONCLUSIONS: Our study revealed excellent reliability in cases with no residual viable tumor and good reliability for MPR with the IASLC recommended less than or equal to 10% cutoff for viable tumor after neoadjuvant therapy.
Asunto(s)
Carcinoma de Pulmón de Células no Pequeñas , Neoplasias Pulmonares , Humanos , Neoplasias Pulmonares/patología , Terapia Neoadyuvante/métodos , Reproducibilidad de los Resultados , Carcinoma de Pulmón de Células no Pequeñas/patología , Pulmón/patologíaRESUMEN
Regulatory authorities require veterinary batch-release testing to confirm vaccine potency and safety, but these tests have traditionally relied on large numbers of laboratory animals. Advances in vaccine research and development offer increasing opportunities to replace in vivo testing, and some stakeholders have made significant progress in incorporating 3Rs elements in quality control strategies. A three-part event series entitled "3Rs Implementation in Veterinary Vaccine Batch-Release Testing: Current state-of-the-art and future opportunities" was jointly organized by the Animal-Free Safety Assessment Collaboration, HealthforAnimals, and the International Alliance of Biological Standardization. Two webinars and a workshop aimed to outline the state-of-the-art non-animal approaches for veterinary batch-release testing. The events included information on the state of the deletion of obsolete safety testing and the current initiatives implemented by European, North American, and Asian-Pacific stakeholders on 3Rs implementation and regulatory acceptance. The events contributed to a better understanding of the barriers to 3Rs implementation. Participants highlighted the need for open communication, continued collaboration between stakeholders, and international harmonization of regulatory requirements to help accelerate acceptance. Despite the challenges, the countries represented at this three-part event have shared their commitments to advancing the acceptance of alternative methods.
Asunto(s)
Vacunas , Humanos , Animales , Control de Calidad , Potencia de la Vacuna , Alternativas a las Pruebas en AnimalesRESUMEN
Autism Spectrum Disorder (ASD) is a developmental disorder in which children display repetitive behavior, restricted range of interests, and atypical social interaction and communication. CUL3, coding for a Cullin family scaffold protein mediating assembly of ubiquitin ligase complexes through BTB domain substrate-recruiting adaptors, has been identified as a high-risk gene for autism. Although complete knockout of Cul3 results in embryonic lethality, Cul3 heterozygous mice have reduced CUL3 protein, demonstrate comparable body weight, and display minimal behavioral differences including decreased spatial object recognition memory. In measures of reciprocal social interaction, Cul3 heterozygous mice behaved similarly to their wild-type littermates. In area CA1 of hippocampus, reduction of Cul3 significantly increased mEPSC frequency but not amplitude nor baseline evoked synaptic transmission or paired-pulse ratio. Sholl and spine analysis data suggest there is a small yet significant difference in CA1 pyramidal neuron dendritic branching and stubby spine density. Unbiased proteomic analysis of Cul3 heterozygous brain tissue revealed dysregulation of various cytoskeletal organization proteins, among others. Overall, our results suggest that Cul3 heterozygous deletion impairs spatial object recognition memory, alters cytoskeletal organization proteins, but does not cause major hippocampal neuronal morphology, functional, or behavioral abnormalities in adult global Cul3 heterozygous mice.
Asunto(s)
Trastorno del Espectro Autista , Trastorno Autístico , Animales , Ratones , Trastorno del Espectro Autista/genética , Trastorno Autístico/genética , Proteínas Cullin/genética , Proteínas Cullin/metabolismo , Unión Proteica , ProteómicaRESUMEN
Transition-metal dichalcogenides (TMDs) intercalated with magnetic ions serve as a promising materials platform for developing next-generation, spin-based electronic technologies. In these materials, one can access a rich magnetic phase space depending on the choice of intercalant, host lattice, and relative stoichiometry. The distribution of these intercalant ions across given crystals, however, is less well defined-particularly away from ideal packing stoichiometries-and a convenient probe to assess potential longer-range ordering of intercalants is lacking. Here, we demonstrate that confocal Raman spectroscopy is a powerful tool for mapping the onset of intercalant superlattice formation in Fe-intercalated NbSe2 (FexNbSe2) for 0.14 ≤ x < 0.25. We use single-crystal X-ray diffraction to confirm the presence of longer-range intercalant superstructure and employ polarization-, temperature-, and magnetic field-dependent Raman measurements to examine both the symmetry of emergent phonon modes in the intercalated material and potential magnetoelastic coupling. Magnetometry measurements further indicate a correlation between the onset of magnetic ordering and the relative degree of intercalant superlattice formation. These results show Raman spectroscopy to be an expedient, local probe for mapping intercalant ordering in this class of magnetic materials.
RESUMEN
Separating oxygen from air to create oxygen-enriched gas streams is a process that is significant in both industrial and medical fields. However, the prominent technologies for creating oxygen-enriched gas streams are both energy and infrastructure intensive as they use cryogenic temperatures or materials that adsorb N2 from air. The latter method is less efficient than the methods that adsorb O2 directly. Herein, we show, via a combination of gas adsorption isotherms, gas breakthrough experiments, neutron and synchrotron X-ray powder diffraction, Raman spectroscopy, and computational studies, that the metal-organic framework, Al(HCOO)3 (ALF), which is easily prepared at low cost from commodity chemicals, exhibits substantial O2 adsorption and excellent time-dependent O2/N2 selectivity in a range of 50-125 near dry ice/solvent (≈190 K) temperatures. The effective O2 adsorption with ALF at ≈190 K and ≈0.21 bar (the partial pressure of O2 in air) is ≈1.7 mmol/g, and at ice/salt temperatures (≈250 K), it is ≈0.3 mmol/g. Though the kinetics for full adsorption of O2 near 190 K are slower than at temperatures nearer 250 K, the kinetics for initial O2 adsorption are fast, suggesting that O2 separation using ALF with rapid temperature swings at ambient pressures is a potentially viable choice for low-cost air separation applications. We also present synthetic strategies for improving the kinetics of this family of compounds, namely, via Al/Fe solid solutions. To the best of our knowledge, ALF has the highest O2/N2 sorption selectivity among MOF adsorbents without open metal sites as verified by co-adsorption experiments..
RESUMEN
Temperature is a fundamental physical quantity important to the physical and biological sciences. Measurement of temperature within an optically inaccessible three-dimensional (3D) volume at microscale resolution is currently limited. Thermal magnetic particle imaging (T-MPI), a temperature variant of magnetic particle imaging (MPI), hopes to solve this deficiency. For this thermometry technique, magnetic nano-objects (MNOs) with strong temperature-dependent magnetization (thermosensitivity) around the temperature of interest are required; here, we focus between 200 K and 310 K. We demonstrate that thermosensitivity can be amplified in MNOs consisting of ferrimagnetic (FiM) iron oxide (ferrite) and antiferromagnetic (AFM) cobalt oxide (CoO) through interface effects. The FiM/AFM MNOs are characterized by X-ray diffraction (XRD), (scanning) transmission electron microscopy (STEM/TEM), dynamic light scattering (DLS), and Raman spectroscopy. Thermosensitivity is evaluated and quantified by temperature-dependent magnetic measurements. The FiM/AFM exchange coupling is confirmed by field-cooled (FC) hysteresis loops measured at 100 K. Magnetic particle spectroscopy (MPS) measurements were performed at room temperature to evaluate the MNOs MPI response. This initial study shows that FiM/AFM interfacial magnetic coupling is a viable method to increase thermosensitivity in MNOs for T-MPI.
RESUMEN
Dead-end filtration has proven to effectively prepare macroscopically (3.8 cm2 ) aligned thin films from solutionbased single-wall carbon nanotubes (SWCNTs). However, to make this technique broadly applicable, the role of SWCNT length and diameter must be understood. To date, most groups report the alignment of unsorted, large diameter (≈1.4 nm) SWCNTs, but systematic studies on their small diameter are rare (≈0.78 nm). In this work, films with an area of A = 3.81 cm2 and a thickness of ≈40 nm are prepared from length-sorted fractions comprising of small and large diameter SWCNTs, respectively. The alignment is characterized by cross-polarized microscopy, scanning electron microscopy, absorption and Raman spectroscopy. For the longest fractions (Lavg = 952 nm ± 431 nm, Δ = 1.58 and Lavg = 667 nm ± 246 nm, Δ = 1.55), the 2D order parameter, S2D, values of ≈0.6 and ≈0.76 are reported for the small and large diameter SWCNTs over an area of A = 625 µm2 , respectively. A comparison of Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory calculations with the aligned domain size is then used to propose a law identifying the required length of a carbon nanotube with a given diameter and zeta potential.
RESUMEN
Covalent modification of carbon nanotubes is a promising strategy for engineering their electronic structures. However, keeping modification sites in registration with a nanotube lattice is challenging. We report a solution using DNA-directed, guanine (G)-specific cross-linking chemistry. Through DNA screening we identify a sequence, C3GC7GC3, whose reaction with an (8,3) enantiomer yields minimum disorder-induced Raman mode intensities and photoluminescence Stokes shift, suggesting ordered defect array formation. Single-particle cryo-electron microscopy shows that the C3GC7GC3 functionalized (8,3) has an ordered helical structure with a 6.5 angstroms periodicity. Reaction mechanism analysis suggests that the helical periodicity arises from an array of G-modified carbon-carbon bonds separated by a fixed distance along an armchair helical line. Our findings may be used to remodel nanotube lattices for novel electronic properties.
RESUMEN
FOREWORD. WOUND HYGIENE: THE NEXT STAGE: Since a panel published the first consensus document on Wound Hygiene in March 2020, there has been a flurry of activity in support of this newly established concept in proactive wound healing.1 The document concluded that all wounds, particularly hard-to-heal ones, will benefit from Wound Hygiene, which should be initiated at the first referral, following a full holistic assessment to identify the wound aetiology and comorbidities, and then implemented at every dressing change until full healing occurs.1 The consensus has since been bolstered by educational webinars; competency-based skills training and support; development of international Wound Hygiene ambassadors; a survey of 1478 respondents, published in July 2021;2 and a case study supplement, published in January 2022, featuring a range of wound types, anatomies and underlying conditions on the improvements in wound-healing progress that can be achieved.3 Wound Hygiene has gained its own identity and is now a term in and of itself, that encompasses a 4-step protocol of care. It is an antibiofilm approach that is increasingly being used across wound care. The results of the survey2 were particularly encouraging for seeing how far Wound Hygiene has come, and how quickly: More than half (57.4%) had heard of the concept of Wound Hygiene Of those, 75.3% have implemented Wound Hygiene Overall, following implementation of Wound Hygiene, 80.3% of respondents reported improved healing rates.2 However, the top three barriers identified by the survey-lack of confidence, competence and research data-show that there is more to be done to support Wound Hygiene in practice.2 As a result, a consensus panel of international key opinion leaders convened virtually in the summer of 2021 to discuss what has been done so far, the outputs of the survey, and ideas for addressing the unmet needs identified by the results. The result is this publication, which represents an addendum to the initial consensus document, broadening support for implementation of Wound Hygiene. This document will reflect on the reasons Wound Hygiene has been successful in its first two years of implementation, reiterating its DNA: Do not wait to treat hard-to-heal wounds Use a simple 4-step approach Enable all healthcare professionals to implement and use Wound Hygiene. The document will also discuss the evolution of the Wound Hygiene concept, focusing on how and when to implement Wound Hygiene on all tissue types of hard-to-heal wounds, and proposing what these are. The panel has expanded the framework in which Wound Hygiene is used, with the ultimate objective of introducing the concept of 'embedding Wound Hygiene intro a proactive wound healing strategy.' Key inefficiencies are often observed along the journeys of people living with hard-to-heal wounds. The limited number of specialised healthcare professionals and the resulting delays in reaching them may increase the likelihood of a hard-to-heal wound developing. In a world where so much is happening so quickly that we may, at times, feel powerless to drive change, the panel wants to provide further guidance to propel the use of Wound Hygiene. The concept of Wound Hygiene is resonating, and the panel wants you to know that in whatever region you work, in whatever area of clinical practice, you are enabled to make this change. Wielding the 4-step Wound Hygiene protocol consistently is a key action every healthcare professional in every care setting can take to tackle the global wound care crisis. Wound Hygiene has taken off-now, where do we want to land? In a place where Wound Hygiene is practised on all wounds, at every stage, until healing. The panel once again recognises that the community of global healthcare providers should consider their local standards and guidelines when applying the recommendations of this document. To this end, the panel has created a flexible 3-phase framework that situates Wound Hygiene as integral to proactive wound healing. The panel hopes you will continue to implement Wound Hygiene and see the benefits it can bring to people living with wounds, as well as those who care for them.
Asunto(s)
Derivación y Consulta , Cicatrización de Heridas , Consenso , Humanos , Higiene , Encuestas y CuestionariosRESUMEN
Two-dimensional (2D) materials that exhibit charge density waves (CDWs)-spontaneous reorganization of their electrons into a periodic modulation-have generated many research endeavors in the hopes of employing their exotic properties for various quantum-based technologies. Early investigations surrounding CDWs were mostly focused on bulk materials. However, applications for quantum devices require few-layer materials to fully utilize the emergent phenomena. The CDW field has greatly expanded over the decades, warranting a focus on the computational efforts surrounding them specifically in 2D materials. In this review, we cover ground in the following relevant theory-driven subtopics for TaS2 and TaSe2: summary of general computational techniques and methods, resulting atomic structures, the effect of electron-phonon interaction of the Raman scattering modes, the effects of confinement and dimensionality on the CDW, and we end with a future outlook. Through understanding how the computational methods have enabled incredible advancements in quantum materials, one may anticipate the ever-expanding directions available for continued pursuit as the field brings us through the 21st century.
RESUMEN
Non-healing wounds are devastating for patients, potentially causing long-term morbidity and an impaired quality of life. They also incur a huge health economic burden for health-care services. Understanding of the causes of non-healing wounds has increased significantly. While the need to address the underlying aetiology has always been acknowledged, the role of biofilm in delaying or preventing healing is now accepted. There is a consensus on the need to debride the wound to remove biofilm and then prevent its reformation, to kickstart healing. The potential benefits of incorporating an antibiofilm component within the wound bed preparation framework are clear. However, such a strategy needs to be flexible enough so that it can be implemented by all practitioners, regardless of their expertise or specialty. Wound Hygiene does this. This supplement describes the Wound Hygiene protocol, and includes a selection of case studies on different wound types, demonstrating its ease of use and effectiveness in clinical practice.
Asunto(s)
Calidad de Vida , Cicatrización de Heridas , Biopelículas , Humanos , HigieneRESUMEN
The recent introduction of slow vacuum filtration (SVF) technology has shown great promise for reproducibly creating high-quality, large-area aligned films of single-wall carbon nanotubes (SWCNTs) from solution-based dispersions. Despite clear advantages over other SWCNT alignment techniques, SVF remains in the developmental stages due to a lack of an agreed-upon alignment mechanism, a hurdle which hinders SVF optimization. In this work, the filter membrane surface is modified to show how the resulting SWCNT nematic order can be significantly enhanced. It is observed that directional mechanical grooving on filter membranes does not play a significant role in SWCNT alignment, despite the tendency for nanotubes to follow the groove direction. Chemical treatments to the filter membrane are shown to increase SWCNT alignment by nearly 1/3. These findings suggest that membrane surface structure acts to create a directional flow along the filter membrane surface that can produce global SWCNT alignment during SVF, rather serving as an alignment template.
Asunto(s)
Nanotubos de Carbono , Nanotubos de Carbono/química , VacioRESUMEN
Characterization of the magnetization dynamics of single-domain magnetic nanoparticles (MNPs) is important for magnetic particle imaging (MPI), magnetic resonance imaging (MRI), and emerging medical diagnostic/therapeutic technologies. Depending on particle size and temperature, nanoparticle magnetization relaxation time constants span from nanoseconds to seconds. In solution, relaxation occurs via coupled Brownian and Néel relaxation mechanisms. Even though their coexistence complicates analysis, the presence of two timescales presents opportunities for more direct control of magnetization behavior if the two processes can be understood, isolated, and tuned. Using high frequency coils and sample temperature tunability, we demonstrate unambiguous determination of the specific relaxation processes for iron oxide nanoparticles using both time and frequency domain techniques. Furthermore, we study the evolution of the fast dynamics at ≈ 10 nanosecond timescales, for magnetic field amplitudes relevant to MPI.
RESUMEN
Mass spectrometry and Raman vibrational spectroscopy were used to follow competitive dynamics between adsorption and desorption of H and anions during potential cycling of three low-index Cu surfaces in acid electrolytes. Unique to Cu(111) is a redox wave for surface hydride formation coincident with anion desorption, while the reverse reaction of hydride decomposition with anion adsorption yields H2 by recombination rather than oxidation to H3O+. Charge imbalance between the reactions accounts for the asymmetric voltammetry in SO42-, ClO4-, PO43-, and Cl- electrolytes with pH 0.68-4.5. Two-dimensional hydride formation is evidenced by the reduction wave prior to H2 evolution and vibrational bands between 995 and 1130 cm-1. In contrast to Cu(111), no distinct voltammetric signature of surface hydride formation is observed on Cu(110) and Cu(100). The Cu(111) hydride surface phase may serve to catalyze hydrofunctionalization reactions such as CO2 reduction to CH4 and should be broadly useful in electro-organic synthesis.
RESUMEN
Magnetic excitations in van der Waals (vdW) materials, especially in the two-dimensional (2D) limit, are an exciting research topic from both the fundamental and applied perspectives. Using temperature-dependent, magneto-Raman spectroscopy, we identify the hybridization of two-magnon excitations with two phonons in manganese phosphorus triselenide (MnPSe3), a magnetic vdW material that hosts in-plane antiferromagnetism. Results from first-principles calculations of the phonon and magnon spectra further support our identification. The Raman spectra's rich temperature dependence through the magnetic transition displays an avoided crossing behavior in the phonons' frequency and a concurrent decrease in their lifetimes. We construct a model based on the interaction between a discrete level and a continuum that reproduces these observations. Our results imply a strong hybridization between each phonon and a two-magnon continuum. This work demonstrates that the magnon-phonon interactions can be observed directly in Raman scattering and provides deep insight into these interactions in 2D magnetic materials.
RESUMEN
In targeting reduced valent lanthanide chalcogenides, we report the first nanoparticle synthesis of the mixed-valent ferromagnets Eu3 S4 and EuSm2 S4 . Using divalent lanthanide halides with bis(trimethylsilyl)sulfide and oleylamine, we prepared nanoparticles of EuS, Eu3 S4 , EuSm2 S4 , SmS1.9 , and Sm3 S4 . All nanoparticle phases were identified using powder X-ray diffraction, transmission electron microscopy was used to confirm morphology and nanoparticle size, and magnetic susceptibility measurements for determining the ordering temperatures and valence. The UV/Vis, Raman and X-ray photoelectron spectroscopies for each phase were compared. Surprisingly, the phase is influenced by the halide and the reaction temperature, where EuCl2 formed EuS while EuI2 formed Eu3 S4 , highlighting the role of kinetics in phase stabilization. Interestingly, at lower temperatures EuI2 initially forms EuS, and converts over time to Eu3 S4 .