RESUMEN
Relaxor ferroelectric (RFE) films are promising energy-storage candidates for miniaturizing high-power electronic systems, which is credited to their high energy density (Ue) and efficiency. However, advancing their Ue beyond 200 joules per cubic centimeter is challenging, limiting their potential for next-generation energy-storage devices. We implemented a partitioning polar-slush strategy in RFEs to push the boundary of Ue. Guided by phase-field simulations, we designed and fabricated high-performance Bi(Mg0.5Ti0.5)O3-SrTiO3-based RFE films with isolated slush-like polar clusters, which were realized through suppression of the nonpolar cubic matrix and introduction of highly insulating networks. The simultaneous enhancement of the reversible polarization and breakdown strength leads to a Ue of 202 joules per cubic centimeter with a high efficiency of ~79%. The proposed strategy provides a design freedom for next-generation high-performance dielectrics.
RESUMEN
Black phosphorus with a superior theoretical capacity (2596 mAh g-1) and high conductivity is regarded as one of the powerful candidates for lithium-ion battery (LIB) anode materials, whereas the severe volume expansion and sluggish kinetics still impede its applications in LIBs. By contrast, the exfoliated two-dimensional phosphorene owns negligible volume variation, and its intrinsic piezoelectricity is considered to be beneficial to the Li-ion transfer kinetics, while its positive influence has not been discussed yet. Herein, a phosphorene/MXene heterostructure-textured nanopiezocomposite is proposed with even phosphorene distribution and enhanced piezo-electrochemical coupling as an applicable free-standing asymmetric membrane electrode beyond the skin effect for enhanced Li-ion storage. The experimental and simulation analysis reveals that the embedded phosphorene nanosheets not only provide abundant active sites for Li-ions, but also endow the nanocomposite with favorable piezoelectricity, thus promoting the Li-ion transfer kinetics by generating the piezoelectric field serving as an extra accelerator. By waltzing with the MXene framework, the optimized electrode exhibits enhanced kinetics and stability, achieving stable cycling performances for 1,000 cycles at 2 A g-1, and delivering a high reversible capacity of 524 mAh g-1 at - 20 â, indicating the positive influence of the structural merits of self-assembled nanopiezocomposites on promoting stability and kinetics.
RESUMEN
BACKGROUND: Primary osteoporosis refers to a disease of aging characterized by reduced bone mass, damage to bone tissue microarchitecture, and predisposition to fracture.Sling core stabilization training emphasizes activating the deep local muscles of the spine under unstable conditions, and enhancing the body's balance and control during exercise. CASE PRESENTATION: A 70-year-old female went to the Acupuncture and Rehabilitation Department due to low back pain caused by osteoporosis.The patient received sling core stabilization training three times a week based on Calcium and Vitamin D Supplementation. After training, the patient's back pain was significantly relieved and insisted one year. In the physical examination of bone mineral density, the results showed that the value of bone mineral density was better than last year.The patients adhered to sling core stabilization training and observed the changes of bone mineral density every year basis on calcium and vitamin D supplementation. DISCUSSION: However, cases of calcium and vitamin D supplementation-based regular sling core stabilization training that improves bone density in osteoporosis patients have been rarely reported. Our group shared cases and analyzed possible mechanisms, hoping to provide reference for the prevention and treatment of primary osteoporosis.
Asunto(s)
Densidad Ósea , Osteoporosis , Femenino , Humanos , Anciano , Calcio , Osteoporosis/complicaciones , Osteoporosis/terapia , Calcio de la Dieta , Vitamina D/uso terapéutico , Suplementos DietéticosRESUMEN
Transition metal dichalcogenides (TMDs) are regarded as promising cathode materials for zinc-ion storage owing to their large interlayer spacings. However, their capabilities are still limited by sluggish kinetics and inferior conductivities. In this study, a facile one-pot solvothermal method is exploited to vertically plant piezoelectric 1T MoSe2 nanoflowers on carbon cloth (CC) to fabricate crystallographically textured electrodes. The self-built-in electric field owing to the intrinsic piezoelectricity during the intercalation/deintercalation processes can serve as an additional piezo-electrochemical coupling accelerator to enhance the migration of Zn2+ . Moreover, the expanded interlayer distance (9-10 Å), overall high hydrophilicity, and conductivity of the 1T phase MoSe2 also promoted the kinetics. These advantages endow the tailored 1T MoSe2 /CC nanopiezocomposite with feasible Zn2+ diffusion and desirable electrochemical performances at room and low temperatures. Moreover, 1T MoSe2 /CC-based quasi-solid-state zinc-ion batteries are constructed to evaluate the potential of the proposed material in low-temperature flexible energy storage devices. This work expounds the positive effect of intrinsic piezoelectricity of TMDs on Zn2+ migration and further explores the availabilities of TMDs in low-temperature wearable energy-storage devices.
RESUMEN
Flexible piezoelectric thin films are raising interest in energy harvesting and wearable electronics, although their direct fabrication is challenging in the selection of substrates and thermal processing. In this work, we developed direct fabrication of flexible lead-free (K, Na)NbO3 (KNN)-based piezoelectric films on commercially available metallic foils by sol-gel processing. Stainless steel and platinum foils are selected as flexible substrates because of their good thermal stability, robust flexibility, and cost-efficiency. The sol-gel-processed KNN-based thin films on both of the metallic foils show good flexibility, with the bending radii reaching ±3 mm. The flexible thin films grown on stainless steel and platinum foils present high breakdown electric fields that reach 1760 and 2530 kV/cm, respectively, resulting from the fine-grained dense structure, limited leakage current density, and suppressed mobility of charged carriers. Improved effective piezoelectric coefficient d33, eff* (75.4 pm/V) with a slight decrease after bending was obtained in the flexible thin films on Pt when compared to their rigid counterparts. The flexible lead-free piezoelectric thin films with combined high breakdown electric fields and piezoelectric and energy storage properties may pave the way for integrating KNN-based multifunctional thin films into flexible electronics.
RESUMEN
Plasticity and functional diversity of macrophages play an important role in resisting pathogens invasion, tumor progression and tissue repair. At present, nanodrug formulations are becoming increasingly important to induce and control the functional diversity of macrophages. In this framework, the internalization process of nanodrugs is co-regulated by a complex interplay of biochemistry, cell physiology and cell mechanics. From a biophysical perspective, little is known about cellular mechanics' modulation induced by the nanodrug carrier's internalization. In this study, we used the polylactic-co-glycolic acid (PLGA)-polyethylene glycol (PEG) nanofibers as a model drug carrier, and we investigated their influence on macrophage mechanics. Interestingly, the nanofibers internalized in macrophages induced a local increase of stiffness detected by atomic force microscopy (AFM) nanomechanical investigation. Confocal laser scanning microscopy revealed a thickening of actin filaments around nanofibers during the internalization process. Following geometry and mechanical properties by AFM, indentation experiments are virtualized in a finite element model simulation. It turned out that it is necessary to include an additional actin wrapping layer around nanofiber in order to achieve similar reaction force of AFM experiments, consistent with confocal observation. The quantitative investigation of actin reconfiguration around internalized nanofibers can be exploited to develop novel strategies for drug delivery.
RESUMEN
Although inorganic perovskite solar cells (PSCs) are promising in thermal stability, their large open-circuit voltage (VOC ) deficit and difficulty in large-area preparation still limit their development toward commercialization. The present work tailors C60 via a codoping strategy to construct an efficient electron-transporting layer (ETL), leading to a significant improvement in VOC of the inverted inorganic CsPbI2 Br PSC. Specifically, tris(pentafluorophenyl)borane (TPFPB) is introduced as a dopant to lower the lowest unoccupied molecular orbital (LUMO) level of the C60 layer by forming a Lewis acidic adduct. The enlarged free energy difference provides a favorable enhancement in electron injection and thereby reduces charge recombination. Subsequently, a nonhygroscopic lithium salt (LiClO4 ) is added to increase electron mobility and conductivity of the film, leading to a reduction in the device hysteresis and facilitating the fabrication of a large-area device. Finally, the as-optimized inorganic CsPbI2 Br PSCs gain a champion power conversion efficiency (PCE) of 15.19%, with a stabilized power output (SPO) of 14.21% (0.09 cm2 ). More importantly, this work also demonstrates a record PCE of 14.44% for large-area inorganic CsPbI2 Br PSCs (1.0 cm2 ) and reports the first inorganic perovskite solar module with the excellent efficiency exceeding 12% (10.92 cm2 ) by a self-developed quasi-curved heating method.
RESUMEN
Due to poor regenerative capabilities of the brain, a treatment for traumatic brain injury (TBI) presents a serious challenge to modern medicine. Biofunctional scaffolds that can support neuronal growth, guide neurite elongation, and re-establish impaired brain tissues are urgently needed. To this end, we developed an aligned biofunctional scaffold (aPLGA-LysoGM1), in which poly (lactic-co-glycolic acid) (PLGA) was functionalized with sphingolipid ceramide N-deacylase (SCDase)-hydrolyzed monosialotetrahexosylganglioside (LysoGM1) and electrospinning was used to form an aligned fibrous network. As a ganglioside of neuronal membranes, the functionalized LysoGM1 endows the scaffold with unique biological properties favoring the growth of neuron and regeneration of injured brain tissues. Moreover, we found that the aligned PLGA-LysoGM1 fibers acted as a topographical cue to guide neurite extension, which is critical for organizing the formation of synaptic networks (neural networks). Systematic in vitro studies demonstrated that the aligned biofunctional scaffold promotes neuronal viability, neurite outgrowth, and synapse formation and also protects neurons from pressure-related injury. Additionally, in a rat TBI model, we demonstrated that the implantation of aPLGA-LysoGM1 scaffold supported recovery from brain injury, as more endogenous neurons were found to migrate and infiltrate into the defect zone compared with alternative scaffold. These results suggest that the aligned biofunctional aPLGA-LysoGM1 scaffold represents a promising therapeutic strategy for brain tissue regeneration following TBI.
Asunto(s)
Lesiones Traumáticas del Encéfalo , Neuritas , Andamios del Tejido , Animales , Lesiones Traumáticas del Encéfalo/terapia , Ácido Láctico , Proyección Neuronal , RatasRESUMEN
Collagen is the main protein in extracellular matrix that is found in many connective tissues, and it exhibits piezoelectricity that is expected to correlate with its hierarchical microstructure. Resolving fine electromechanical structure of collagen, however, is challenging, due to its weak piezoresponse, rough topography, and microstructural hierarchy. Here we adopt the newly developed sequential excitation strategy in combination with piezoresponse force microscopy to overcome these difficulties. It excites the local electromechanical response of collagen via a sequence of distinct frequencies, minimizing crosstalk with topography, followed by principal component analysis to remove the background noise and simple harmonic oscillator model for physical analysis and data reconstruction. These enable us to acquire high fidelity mappings of fine electromechanical response at the nanoscale that correlate with the gap and overlap domains of collagen fibrils, which show substantial improvement over conventional piezoresponse force microscopy techniques. It also embodies the spirit of big data atomic force microscopy that can be readily extended into other applications with targeted data acquisition.
Asunto(s)
Arterias/ultraestructura , Colágeno/química , Microscopía de Fuerza Atómica/métodos , Animales , Matriz Extracelular/química , Fenómenos Mecánicos , Análisis de Componente Principal , PorcinosRESUMEN
In this paper, we present a novel charge-free fluorescence-switchable near-infrared (IR) dye based on merocyanine for target specific imaging. In contrast to the typical bathochromic shift approach by extending π-conjugation, the bathochromic shift of our merocyanine dye to the near-IR region is due to an unusual S- cis diene conformer. This is the first example where a fluorescent dye adopts the stable S- cis conformation. In addition to the novel bathochromic shift mechanism, the dye exhibits fluorescence-switchable properties in response to polarity and viscosity. By incorporating a protein-specific ligand to the dye, the probes (for SNAP-tag and hCAII proteins) exhibited dramatic fluorescence increase (up to 300-fold) upon binding with its target protein. The large fluorescence enhancement, near-IR absorption/emission, and charge-free scaffold enabled no-wash and site-specific imaging of target proteins in living cells and in vivo with minimum background fluorescence. We believe that our unconventional approach for a near-IR dye with the S- cis diene conformation can lead to new strategies for the design of near-IR dyes.
RESUMEN
The photovoltaic conversion efficiency of perovskite solar cells based on organic-inorganic CH3NH3PbI3 has risen spectacularly from 3.8% to over 20% in just seven years, yet quite a few important fundamental issues have not been settled, and the role of spontaneous polarization remains poorly understood. While piezoresponse force microscopy (PFM) has been adopted to probe possible ferroelectricity in CH3NH3PbI3, the reported data are often conflicting and inconclusive, due to the complexity in the apparent piezoresponse and its switching that may arise from ionic motions, electrostatic interactions, and other electromechanical mechanisms. Here, using a combination of microscopic and macroscopic measurements, we unambiguously establish the linear piezoelectricity of CH3NH3PbI3 arising from its spontaneous polarization, which can be switched by an electric field, though other electromechanical contributions such as ionic motions are also shown to exist. More importantly, we demonstrate strong interactions between polarization and light in technologically relevant CH3NH3PbI3 films with good conversion efficiencies, observing that the spontaneous polarization can also be switched by light illumination in the absence of an electric field. The light is shown to reduce the coercive voltage of CH3NH3PbI3 and shifts its nucleation bias, suggesting that the photo-induced switching is caused by ionic motions in combination with a photovoltaic field. This set of studies offer strong evidence on the interactions among photo-induced charges, polarization, and ions in perovskite CH3NH3PbI3, and these fundamental observations lay the ground for answering the technologically important question regarding the effects of ferroelectricity on its photovoltaic conversion.
RESUMEN
Recently, highly efficient solar cells based on organic-inorganic perovskites have been intensively studied for developing fabricating methods and device structures. To improve the performance of perovskite film devices, delicate control of charge transfer material interconnectivity is required. Here, controlling the mesoporous TiO2 structure improves their charge collection and injection rate, and allows substantial enhancement of the corresponding device performance. We found that increasing the TiCl4 processing time deteriorates the device performance by introducing a large amount of excessively large perovskite particles, surface roughness and charge recombination. Proper TiCl4 processing dramatically improves the charge transport within the electron transfer layer, explaining the efficient performance of meso-superstructured solar cells.
RESUMEN
ZnO nanocrystals with a particle size of 20-30 nm have been synthesised for the first time using a template-free method. Chalcopyrite Cu0.28In1.72Se2.72 nanocrystals (5-10 nm) were directly anchored on ZnO nanocrystals by a vacuum one-pot-nanocasting process without any long ligands. We further investigated Cu0.28In1.72Se2.72 quantum dots and dye bilayer-sensitized solar cells, which exhibited power conversion efficiency of 57.4% higher than the single-dye-sensitized solar cells.