RESUMEN
Objective: The objective of this study is to assess the impact of low-intensity pulsed ultrasound (LIPUS) therapy on the peri-implant osteogenesis in a Type II diabetes mellitus (T2DM) rat model. Methods: A total of twenty male Sprague-Dawley (SD) rats were randomly allocated into four groups: Control group, T2DM group, Control-LIPUS group, and T2DM-LIPUS group. Implants were placed at the rats' bilateral maxillary first molar sites. The LIPUS treatment was carried out on the rats in Control-LIPUS group and T2DM-LIPUS group, immediately after the placement of the implants, over three consecutive weeks. Three weeks after implantation, the rats' maxillae were extracted for micro-CT, removal torque value (RTV), and histologic analysis. Results: Micro-CT analysis showed that T2DM rats experienced more bone loss around implant cervical margins compared with the non-T2DM rats, while the LIPUS treated T2DM rats showed similar bone heights to the non-T2DM rats. Bone-implant contact ratio (BIC) were lower in T2DM rats but significantly improved in the LIPUS treated T2DM rats. Bone formation parameters including bone volume fraction (BV/TV), trabecular thickness (Tb.Th), bone mineral density (BMD) and RTV were all positively influenced by LIPUS treatment. Histological staining further confirmed LIPUS's positive effects on peri-implant new bone formation in T2DM rats. Conclusion: As an effective and safe treatment in promoting osteogenesis, LIPUS has a great potential for T2DM patients to attain improved peri-implant osteogenesis. To confirm its clinical efficacy and to explore the underlying mechanism, further prospective cohort studies or randomized controlled trials are needed in the future.
RESUMEN
Porphyromonas gingivalis (P. gingivalis) is one of the keystone pathogenic bacteria of periodontitis and peri-implantitis. This study aimed to investigate the antibacterial effects and molecular mechanisms of trans-cinnamaldehyde (TC), a safe extract from natural plants, on P. gingivalis. Minimum inhibitory and minimum bactericidal concentrations (MIC and MBC) of TC were determined, and scanning and transmission electron microscopies were used to assess the morphological changes. The overall biomass was estimated, and the metabolic activity of biofilms was determined at different TC concentrations. A microarray-based bioinformatics analysis was performed to elucidate the underlying molecular mechanisms of TC-inhibited P. gingivalis, and significant differences among groups were determined. TC showed an inhibitory effect on the proliferation and survival of planktonic P. gingivalis, of which the MIC and MBC were 39.07 µg/mL and 78.13 µg/mL, respectively. TC also significantly suppressed the formation and metabolic activity of P. gingivalis biofilm. The results of the significant pathways and gene ontology (GO) analyses revealed that TC treatment inhibited two metabolic pathways, accompanied by the downregulation of relative genes of nitrogen metabolism (NrfA, NrfH, and PG_2213) and starch and sucrose metabolism (PG_1681, PG_1682, and PG_1683). Thus, this study confirmed TC to be a natural antimicrobial agent against P. gingivalis and further demonstrated that TC suppressed the microbial activity on P. gingivalis through the disruption of physiological metabolism, which might inhibit the growth and the biofilm formation of P. gingivalis.
RESUMEN
INTRODUCTION: In the light of the digital teaching, it is necessary that the effectiveness of a new digital real-time evaluation system in the preclinical training of tooth preparation be evaluated. MATERIALS AND METHODS: Forty undergraduate dental students of the fourth year were randomly divided into the control group and the experimental group to complete the training task of tooth preparation for porcelain fused to metal (PFM) crown restoring the upper right central incisor. The control students received conventional training with instructor's guidance. The experimental students received training with the digital system without instructor's guidance. Every student exercised preparation in two resin incisors in 3 h training by respective training methods. A third incisor was prepared on a dental model in the simulated head phantom by each student as the test on the next day. All students' tooth preparations were scored by the same two experienced experts. The experimental students were asked to answer a questionnaire regarding their attitudes and opinions on the digital evaluation system in preclinical training. RESULTS: There was no significant difference between the scores of the experimental group and the control group (p > .05). The students of two groups obtained the similar scores in the test (p > .05). Most of the students were supportive of the application of digital training system in the preclinical tooth preparation training course. CONCLUSIONS: The digital real-time evaluation system could provide effective training effects for the dental undergraduate students in the preclinical training of tooth preparation in fixed prosthodontics.
Asunto(s)
Evaluación Educacional , Prostodoncia , Humanos , Evaluación Educacional/métodos , Proyectos Piloto , Prostodoncia/educación , Preparación Protodóncica del Diente , Educación en Odontología/métodos , Coronas , Preparación del Diente , Estudiantes de OdontologíaRESUMEN
PURPOSE: To investigate the relationship between size of different connectors and bending strength of cast porcelain materials. METHODS: The samples were divided into 5 groups according to the area of all-porcelain materials and simulated connector. In group A, simulated connector with cast porcelain material with a cross-section of 2 mm×3 mm was selected; In group B, simulated connector with cast porcelain material with a cross-section of 2 mm×4 mm was selected; In group C, simulated connector with cast porcelain material with a cross-section of 3 mm×3 mm was selected; In group D, simulated connector with cast porcelain material with a cross-section of 3 mm×4 mm was selected; In group E, simulated connector with zirconium oxide material with a cross-section of 2 mm×3 mm was selected. The fracture load was tested using classical three-point bending experiment, statistical analysis was performed using SPSS 18.0 software package. RESULTS: For lithium disilicate cast porcelain, the fracture load increased with increasing cross section area, but both below the shear zirconia fracture load with a cross section of 2 mm×3 mm(Pï¼0.05).The increase in width increased the fracture load of porcelain samples compared to the length. CONCLUSIONS: It is suitable to increase linker area when cast porcelain is applied to single-end bridge, which is especially achieved by increasing the width at the linker.
Asunto(s)
Porcelana Dental , Circonio , Cerámica , Análisis del Estrés Dental , Resistencia Flexional , Ensayo de Materiales , Propiedades de SuperficieRESUMEN
PURPOSE: This study was to evaluate the fracture resistance of endodontically treated maxillary premolars restored with different CAD/CAM all-ceramic restorations in vitro. METHODS: Mesio-occluso-function tip(MOF) cavities were prepared in 21 extracted human maxillary premolars due to endodontic treatment. The teeth were divided into 3 groups. G1:conventional composite resin; G2: cavitiesï¼G3: conventional composite resin with a horizontal glass fiber post inserted palatal walls. Restorations were fabricated from a pressable lithium disilicate glass-ceramic and adhesively cemented (Rely X U200). Then, the specimens were subjected to a compressive load at a crosshead speed of 0.5 mm/min until fracture. The fractured specimens were analyzed to determine the fracture pattern using a stereomicroscope. SPSS 15.0 software package was used to analyse the data. RESULTS: G3ï¼1570.7±108.7ï¼ had higher failure load than G1(1214.6±95.8) and G2(1285.9±87.6)(P<0.05). G1 was similar to G2.The crown was lost in G1 and G2. There was a fracture of the crown and tooth in G3. CONCLUSIONS: CAD/CAM all-ceramic crown with fiberglass posts might be an effective method for restoration of endodontically treated premolars with MOF cavity defect.
Asunto(s)
Técnica de Perno Muñón , Fracturas de los Dientes , Diente no Vital , Diente Premolar , Cerámica , Resinas Compuestas , Fracaso de la Restauración Dental , Análisis del Estrés Dental , HumanosRESUMEN
The regeneration capacity of osteoporotic bones is generally lower than that of normal bones. Nowadays, alendronate (AL) are orally administrated for osteoporosis due to the inhibition of bone resorption. However, systemic administration of AL is characterized by extremely low bioavailability and high toxicity. In this study, the amino-modified mesoporous bioactive glass scaffolds (N-MBGS) were fabricated by a simple powder processing technique as a novel drug-delivery system for AL. The effects of AL on the osteogenic differentiation of bone mesenchymal stem cells derived from ovariectomized rats (rBMSCs-OVX) were first estimated. The loading efficiency and release kinetics of AL on N-MBGS were investigated in vitro and the osteogenesis of AL-loaded N-MBGS in rat calvarial defect model was detected by micro-CT measurements and the histological assay. Our results revealed that proper concentration of AL significantly promoted osteogenic differentiation of rBMSCs-OVX. The amount and delivery rate of AL were greatly improved through amino modification. Additionally, scaffolds with AL showed better bone formation in vivo, especially for the N-MBGS group. Our results suggest that the novel amino-modified MBGS are promising drug-delivery system for osteoporotic bone defect repairing or regeneration. The experimental schematic of the novel amino-modified MBGS as a promising drug-delivery system for osteoporotic bone regeneration.
Asunto(s)
Alendronato/química , Regeneración Ósea/efectos de los fármacos , Cerámica/química , Cerámica/farmacología , Portadores de Fármacos/química , Osteogénesis/efectos de los fármacos , Animales , Supervivencia Celular/efectos de los fármacos , Liberación de Fármacos , Cinética , Porosidad , RatasRESUMEN
STATEMENT OF PROBLEM: Lipopolysaccharides (LPS) are constituents of gingival crevicular fluid and may affect the base metal alloys used in metal ceramic crowns. The role of LPS in base metal alloys is currently unknown. PURPOSE: The purpose of this in vitro study was to evaluate the effects of gram-negative bacterial LPS on the electrochemical behavior of Ni-Cr and Co-Cr alloys. MATERIAL AND METHODS: Alloy specimens were divided into 4 groups according to Escherichia coli LPS concentration (0, 0.15, 15, and 150 µg/mL) in acidic saliva (pH 5). Open circuit potential (OCP) and potentiodynamic polarization behavior were examined using a computer-controlled potentiostat. Metal ions released from the 2 alloys were measured by immersion in LPS-free solution and 150 µg/mL LPS solution and analyzed by inductively coupled plasma atomic emission spectrometry (ICP-AES). Data were evaluated using 1-way ANOVA (α=.05). RESULTS: Compared with control groups, medium LPS concentration (15 µg/mL) accelerated Ni-Cr alloy corrosion (P<.05), whereas high LPS concentration (150 µg/mL) accelerated Co-Cr alloy corrosion (P<.05), as determined by OCP, corrosion current density, and polarization resistance parameters. After immersion in high LPS concentrations (150 µg/mL), a slight increase in Ni ion release (P >.05) was observed for the Ni-Cr alloy, while a more significant Co ion release (P<.05) was observed for the Co-Cr alloy. CONCLUSIONS: LPS negatively affected the electrochemical behavior of both the Ni-Cr and Co-Cr alloys.
Asunto(s)
Aleaciones de Cromo/química , Corrosión , Lipopolisacáridos/química , Aleaciones de Cerámica y Metal/química , Escherichia coli , Humanos , Ensayo de Materiales , Níquel/química , Saliva Artificial/químicaRESUMEN
TiO2 nanotubes could stimulate osteogenic differentiation of stem cells, but the molecular mechanisms underlying the interactions between nanotubes and stem cells remain unclear. In this study, we investigated the response of bone marrow stromal cells to nanotubes of different diameters using microarray-based bioinformatics approach. Gene ontology (GO) and GO enrichment network analysis indicated that larger TiO2 nanotubes were more potent than smaller nanotubes in inducing the expression of genes involved in cell proliferation, differentiation, and immune responses, and inhibiting that of genes responsible for cell adhesion. The analysis of the signaling network containing significantly affected genes suggested that Na(+)/K(+) transporting ATPases ATP1A2 (alpha 2 polypeptide) and ATP1A3 (alpha 3 polypeptide), and MAP3K11 (mitogen-activated protein kinase kinase kinase 11) were important for inducing osteogenic differentiation of bone marrow stromal cells without additional osteogenic stimuli. The upregulation of the ATP1A2 and MAP3K11 genes confirmed by real-time PCR indicates that the response of bone marrow stromal cells to nanotube cues may be mediated by the pathways previously implicated in transducing mechanical stress signals. Our results revealed some molecular mechanisms by which TiO2 nanotubes may direct osteogenic differentiation of stem cells.
Asunto(s)
Diferenciación Celular , Nanotubos , Osteogénesis , Células Madre/citología , Titanio , Animales , Masculino , Microscopía Electrónica de Rastreo , Ratas , Ratas WistarRESUMEN
PURPOSE: Electrochemical impedance spectroscopy (EIS) was employed to study the corrosion behaviour of titanium in dummy environment with blood-serum protein. METHODS: EIS of titanium in PBS and cell culture fluid was acquired by advanced electrochemical system. The characteristic of EIS-Nyquist and EIS-Bode were investigated and the equivalent circuit was used to analyze the EIS results. The data was analyzed using SPSS 11.0 software package. RESULTS: The corrosion resistance of the titanium in cell culture fluid was significantly higher than that in PBS (P<0.05). The phase angle of TiO2-based passive film at low frequency decreased to 55° when titanium was in PBS, but 75° when in cell culture fluid. CONCLUSIONS: The blood-serum protein plays an important role in the corrosion behaviour of titanium in physiological environment.
Asunto(s)
Impedancia Eléctrica , Titanio , Proteínas Sanguíneas , Corrosión , Electroquímica , HumanosRESUMEN
The purpose of the present study is to evaluate the fracture resistance of endodontically treated maxillary premolars restored using CAD/CAM onlays or crowns and luted with two types of resin cement. Forty all-ceramic crowns and twenty onlays were fabricated on maxillary premolars using the Cerec 3 system (n=10). The abutments were randomly subjected to two different procedures: Endodontic treatment was performed on forty teeth restored through a mesio-occlusal-distal (MOD) cavity preparation with composite resin fillings; twenty teeth without endodontic treatment served as control. In endodontically treated teeth restored using IPS e.max CAD crowns or onlays, the fracture loads were lower than those of the control. Endodontic treatment of teeth restored using CAD/CAM crowns does not impair the fracture load but shows more severe fractures than teeth restored using CAD/CAM onlays. This suggests that a CAD/CAM onlay might be an effective method for the restoration of endodontically treated premolars with MOD cavity defect.
Asunto(s)
Diente Premolar/patología , Coronas , Endodoncia , Silicatos/administración & dosificación , Cementos Dentales , Humanos , Fracturas de los Dientes/prevención & controlRESUMEN
PURPOSE: To evaluate the bond strength of 3 resin cements on ceramic-dentin. METHODS: Thirty sound human posterior tooth were selected for this study and the flat dentin surfaces were prepared. The specimens were divided into 3 groups(n=10) randomly, which were bonded to the CAD/CAM ceramics with RelyX ARC(etch-and-rinse adhesive), Clearfil DC Bond(self-etching resin cement) and RelyX Unicem(self-adhesive resin cement). The bond strengths were tested and the bond surfaces were observed under stereoscopic microscope.SPSS 11.0 software package was used for statistical analysis. RESULTS: The shear bond strength of RelyX ARC and Clearfil DC Bond was (15.90±6.15)MPa and (14.41±5.07)MPa, respectively. The shear strength of RelyX Unicem was(23.29±7.39)MPa, significantly higher than the others.The shear strength between the three resin cements was significantly different (P<0.05). CONCLUSION: Clearfil DC Bond and RelyX Unicem can achieve a successful bond on CAD/CAM ceramic crowns.
Asunto(s)
Cerámica , Recubrimientos Dentinarios , Bisfenol A Glicidil Metacrilato , Recubrimiento Dental Adhesivo , Porcelana Dental , Dentina , Humanos , Ensayo de Materiales , Polietilenglicoles , Ácidos Polimetacrílicos , Distribución Aleatoria , Cementos de Resina , Resistencia al CorteRESUMEN
PURPOSE: To study the influence of heat treatment on retention force of magnetic attachments. METHODS: Three groups of magnetic attachments (including 10 Magfit EX 400W, 10 Magfit EX 600W, 10 Magfit EX 800W) were fixed on universal test machine respectively. The retention force of each attachment was measured. After heat treatment, their retention force was measured again. The difference of retention force before and after heat treatment was compared using SPSS11.0 software package. RESULTS: The average retention force of magnetic attachments (Magfit EX 400W) was (1.58±0.12)N before heat treatment and (1.64±0.11)N after heat treatment. The average retention force of magnetic attachments (Magfit EX 600W) was (2.67±0.19)N before heat treatment and (2.65±0.14)N after heat treatment.The average retention force of magnetic attachments (Magfit EX 800W) was (3.02±0.25)N before heat treatment and (3.02±0.24)N after heat treatment. The retention force of magnetic attachments had no significant change after heat treatment (P>0.05). CONCLUSION: The magnetic attachments can be treated by waterbath heart treatment in the clinic without significant change of their retention force.
Asunto(s)
Retención de Dentadura , Calor , Humanos , Fenómenos Magnéticos , MagnetismoRESUMEN
PURPOSE: The aim of this study was to evaluate the corrosion resistance and wear resistance of Ni-Cr alloy after coating titanium nitride (TiN) in oral containing fluorine environment. METHODS: Physical vapor deposition was established to coat titanium nitride (TiN) on the surface of dental cast Ni-Cr alloy to form TiN/Ni-Cr compound. Both Ni-Cr alloy and TiN/Ni-Cr compound were exposed to 37 degrees centigrade, artificial saliva containing 0.24% NaF. The polarization curves of the specimens were measured by PARSTAT 2273 electrochemical station to investigate its corrosion resistance. Vicker's hardness was measured by HXD-1000TMC/LCD micro-hardness tester to investigate its wear resistance. Statistical analysis was performed by SAS 8.2 software package for Student's t methods. RESULTS: The corrosion potential of Ni-Cr alloy was -362.407 mV, the corrosion current density was 1.568µAcm(-2),the blunt-breaking potential was 426 mV bofor TiN coating. The corrosion potential of TiN/Ni-Cr compound was -268.638 mV, the corrosion current density was 0.114µAcm(-2),the blunt-breaking potential was 1142 mV after TiN coating. Polarization curves showed TiN/Ni-Cr compound improved the corrosion potential and blunt-breaking potential, decreased the corrosion current density. The Vicker's hardness of Ni-Cr alloy was 519.75±27.27 before TiN coating, the Vicker's hardness of TiN/Ni-Cr compound was 803.24±24.64, the D-value between them was 283.49±39.34. The difference of Vicker's harnesses between Ni-Cr alloy and TiN/Ni-Cr compound had significant (P<0.01). CONCLUSION: The results demonstrate that the TiN coating can improve the corrosion resistant to F-and the surface hardness of Ni-Cr alloy. Supported by Research Fund of Science and Technology Commission of Shanghai Municipality (Grant No.08DZ2271100), Shanghai Leading Academic Discipline Project (Grant No.S30206 ) and Research Fund of Health Bureau of Shanghai Municipality (Grant No.2009074).
Asunto(s)
Aleaciones Dentales , Fluoruros , Corrosión , Electroquímica , Flúor , Saliva Artificial , Propiedades de Superficie , TitanioRESUMEN
PURPOSE: To observe and compare the microleakage of different composite resin cement systems for IPS Empress 2 ceramics base. METHODS: Sixteen healthy non-carious human molars were selected in the study. Class V ceramic inlay was prepared by IPS Empress 2 ceramics. The samples were divided into two groups, eight in each group. RelyX Unicem and Variolink 2 were used for bonding respectively in 2 groups. All specimens were stored in water at 37 degrees centigrade for 24 hours, then the specimens were subjected to 500 thermocycles ranging from 5 degrees centigrade to 55 degrees centigrade. Eight specimens in each group were evaluated by dye penetration. The microleakage was examined with light microscope. Statistical analysis was performed with SPSS11.0 software package. RESULTS: Enamel margins exhibited lower leakage than dentin margins by using two cementing agents for casting ceramics (P<0.05). The depth of dye for Variolink 2 and RelyX Unicem at enamel and dentin was not significantly different (P>0.05). CONCLUSIONS: The microleakage of Variolink 2 and RelyX Unicem for IPS Empress 2 ceramics base has similar sealing abilities.
Asunto(s)
Cerámica , Porcelana Dental , Cementos Dentales , Esmalte Dental , Filtración Dental , Dentina , Cementos de Ionómero Vítreo , Humanos , Incrustaciones , Cementos de ResinaRESUMEN
PURPOSE: To study the effect of tooth preparation on marginal adaptation of all-ceramic crown designed by the Cerec system. METHODS: Lower first molar in the standard model was prepared into four types, two occlusal convergences (6 degrees and 12 degrees ) and two marginal shapes (chamfer and shoulder), and then divided into four groups correspondingly with 8 copies of abutment preparation test piece in each group. All-ceramic crown was designed by the Cerec 3 system and inserted with corresponding test piece. Marginal silicon rubber thickness of each axis surface was measured by stereo microscope after dissection. The data were analyzed with SPSS11.0 software package. RESULTS: No significant difference was observed between edge silicon rubber thickness of 4 groups of test pieces (Group A: 172.8 microm+/-42.6 microm,Group B: 181.9 microm+/-46.6 microm,Group C: 187.1 microm+/-46.5 microm,Group D: 191.7 microm+/-46.4 microm,P>0.05). Significant difference was observed between mesial surface and distal surface, mesial surface and buccal surface, mesial surface and lingual surface, distal surface and buccal surface, distal surface and lingual surface (P<0.05). No significant difference was observed between buccal surface and lingual surface. Silicon rubber thickness was in the range of 278.1 microm+/-28.8 microm and 135.8 microm+/-14.6 microm, with that of distal surface the largest (278.1 microm+/-28.8 microm) and that of buccal surface the smallest (135.8 microm+/-14.6 microm). CONCLUSIONS: All the restorations appear to have acceptable marginal adaptability,which suggests that the marginal adaptation of occlusal convergence with 12 degrees is better than 6 degrees , while the marginal design with chamfer is better than shoulder. Supported by Shanghai Leading Academic Discipline Project (Grant No.T0202).
Asunto(s)
Coronas , Preparación del Diente , Cerámica , Porcelana Dental , Diseño de Prótesis Dental , HumanosRESUMEN
PURPOSE: To compare the shear bond strength of different composite resin cement systems at different time intervals. METHODS: 48 healthy non-carious human molars were selected in the study. The samples were divided into two groups, 24 in each group. (1) RelyX unicem was used on bonding, (2) Variolink 2 was used on bonding. All specimens were stored in water at 37 degrees C for 2 hours, 24 hours and 1 week. 8 specimens in each group were stressed in shear until failure. Statistical analysis was performed with SPSS11.0 software package. Debonged surface was examined under light microscope. RESULTS: Shear bond strengths of two resin cements showed a significant increase as time went (P<0.05). The failure involved the adhesive/dentin interfaces. CONCLUSIONS: Time can influence the shear bond strength using different composite resin cement systems. Supported by Shanghai Leading Academic Discipline Project (Grant No.T0202).
Asunto(s)
Recubrimiento Dental Adhesivo , Cementos Dentales , China , Dentina , Recubrimientos Dentinarios , Cementos de Ionómero Vítreo , Cementos de Resina , Resistencia al CorteRESUMEN
PURPOSE: To evaluate the long-term clinical results of porcelain fused to metal prostheses. METHODS: Since January 1995, 920 porcelain fused to metal prostheses were fabricated. The long-term outcome were evaluated according to the condition of the prosthese, abutment and the periodontal tissue in the respects of successful rate and causes of failure. RESULTS: 74 patients were found to be during the follow up period, including 36 anterior crowns (46 units), 18 posterior crowns (22 units), 12 percentage of anterior bridges and 8 posterior bridges. The overall failure rate was 8.04%, 4.84% for crown, 8.77% for bridge. The failed prostheses was 5.39%. CONCLUSIONS: Porcelain fused to metal prostheses is an ideal method for restoration. The standard process both for the clinician and the technician must be obeyed to improve the success rate.
Asunto(s)
Porcelana Dental/uso terapéutico , Diseño de Prótesis Dental , Prótesis Dental , Aleaciones de Cerámica y Metal , Coronas , Pilares Dentales , Fracaso de la Restauración Dental , Dentadura Parcial , Humanos , Ensayo de Materiales , Factores de Tiempo , Resultado del TratamientoRESUMEN
PURPOSE: To analyze the stress of the post and core system by using finite element analysis and study the influence of the "crown materials" on the analytic results. METHODS: Three groups of 3D finite element models of maxillary incisors were established according to the fabricating standard of the post and core system by using I-DEAS finite element analysis software. Group A was consisted of the cast metal post and core, the tooth structure after preparation and the periodontal structure. Group B was composed of the PFM, the cast metal post and core, the tooth structure after preparation and the periodontal structure. Group C was composed of the resin crown, the cast metal post and core, the tooth structure after preparation and the periodontal structure. The three groups were loaded and analyzed under the same loading according to the mean value of the bite force of incisors. RESULTS: (1)The maximum stress of dentin in group A was twice higher than that in group B. The maximum primary stress, minimum primary stress and maximum shear stress of group A were respectively 236.35, 228.83 and 218.05 percent of those in group B. The difference of maximum stress values of group B and group C was neglectable. (2) The maximum stress distribution of dentin in group A and group B was quite different (the stress was concentrated in labial and lingual side of the cervical dentin in group A, otherwise in group B it was concentrated in the area around the alveolar and the labial and lingual side of the dentin which was opposite to the tip of the cast metal post and core). The maximum stress distribution of dentin in group A and group B was almost the same. CONCLUSIONS: Different materials of the crown did not influence the result of 3D finite element stress analysis of the post and core system.
Asunto(s)
Análisis del Estrés Dental , Técnica de Perno Muñón , Fuerza de la Mordida , Dentina , Análisis de Elementos Finitos , Humanos , Corona del DienteRESUMEN
PURPOSE: To evaluate the roll of ShadeEye-NCC, a computer-aided colorimeter, in Porcelain-Fused-to-Metal crowns among patients with special colored Teeth. METHODS: The first step was to choose the proper patients. The next was to use the colorimeter to measure the base shade of tooth and fabricate the PFM crowns according to the recipe given by the colorimeter. At last, the effects of the PFM crowns were evaluated subjectively by patients and doctor. RESULTS: The satisfaction rates of patients and doctor were 83.7% and 81.4% respectively, there was no significant difference between the two rates. CONCLUSIONS: The computer-aided colorimeter can offer good base shade recipe for fabricating PFM crowns of patients with special colored teeth.