RESUMEN
The strong light-matter interaction and naturally passivated surfaces of van der Waals materials make heterojunctions of such materials ideal candidates for high-performance photodetectors. In this study, we fabricated SnS2/MoS2 van der Waals heterojunctions and investigated their photoelectric properties. Using an applied gate voltage, we can effectively alter the band arrangement and achieve a transition in type II and type I junctions. It is found that the SnS2/MoS2 van der Waals heterostructures are type II heterojunctions when the gate voltage is above -25 V. Below this gate voltage, the heterojunctions become type I. Photoelectric measurements under various wavelengths of incident light reveal enhanced sensitivity in the ultraviolet region and a broadband sensing range from 400 to 800 nm. Moreover, due to the transition from type II to type I band alignment, the measured photocurrent saturates at a specific gate voltage, and this value depends crucially on the bias voltage and light wavelength, providing a potential avenue for designing compact spectrometers.
RESUMEN
Nanodevices based on van der Waals heterostructures have been predicted, and shown, to have unprecedented operational principles and functionalities that hold promise for highly sensitive and selective gas sensors with rapid response times and minimal power consumption. In this study, we fabricated gas sensors based on vertical MoS2/WS2 van der Waals heterostructures and investigated their gas sensing capabilities. Compared with individual MoS2 or WS2 gas sensors, the MoS2/WS2 van der Waals heterostructure gas sensors are shown to have enhanced sensitivity, faster response times, rapid recovery, and a notable selectivity, especially toward NO2. In combination with a theoretical model, we show that it is important to take into account created trapped states (flat bands) induced by the adsorption of gas molecules, which capture charges and alter the inherent built-in potential of van der Waals heterostructure gas sensors. Additionally, we note that the performance of these MoS2/WS2 heterostructure gas sensors could be further enhanced using electrical gating and mechanical strain. Our findings highlight the importance of understanding the effects of altered built-in potentials arising from gas molecule adsorption induced flat bands, thus offering a way to enhance the gas sensing performance of van der Waals heterostructure gas sensors.
RESUMEN
Miniaturized spectrometers have great potential for use in portable optoelectronics and wearable sensors. However, current strategies for miniaturization rely on von Neumann architectures, which separate the spectral sensing, storage, and processing modules spatially, resulting in high energy consumption and limited processing speeds due to the storage-wall problem. Here, we present a miniaturized spectrometer that utilizes a single SnS2/ReSe2 van der Waals heterostructure, providing photodetection, spectrum reconstruction, spectral imaging, long-term image memory, and signal processing capabilities. Interface trap states are found to induce a gate-tunable and wavelength-dependent photogating effect and a non-volatile optoelectronic memory effect. Our approach achieves a footprint of 19 µm, a bandwidth from 400 to 800 nm, a spectral resolution of 5 nm, and a > 104 s long-term image memory. Our single-detector computational spectrometer represents a path beyond von Neumann architectures.
RESUMEN
The high surface-to-volume ratio and flatness of mechanically exfoliated van der Waals (vdW) layered materials make them an ideal platform to investigate the Langmuir absorption model. In this work, we fabricated field effect transistor gas sensors, based on a variety of mechanically exfoliated vdW materials, and investigated their electrical field-dependent gas sensing properties. The good agreement between the experimentally extracted intrinsic parameters, such as equilibrium constant and adsorption energy, and theoretically predicted values suggests validity of the Langmuir absorption model for vdW materials. Moreover, we show that the device sensing behavior depends crucially on the availability of carriers, and giant sensitivities and strong selectivity can be achieved at the sensitivity singularity. Finally, we demonstrate that such features provide a fingerprint for different gases to quickly detect and differentiate between low concentrations of mixed hazardous gases using sensor arrays.
RESUMEN
van der Waals heterojunctions with tunable polarity are being actively explored for more Moore and more-than-Moore device applications, as they can greatly simplify circuit design. However, inadequate control over the multifunctional operational states is still a challenge in their development. Here, we show that a vertically stacked InSe/SnS2 van der Waals heterojunction exhibits type-II band alignment, and its polarity can be tuned by an external electric field and by the wavelength and intensity of an illuminated light source. Moreover, such SnS2/InSe diodes are self-powered broadband photodetectors with good performance. The self-powered performance can be further enhanced significantly with gas adsorption, and the device can be quickly restored to the state before gas injection using a gate voltage pulse. Our results suggest a way to achieve and design multiple functions in a single device with multifield coupling of light, electrical field, gas, or other external stimulants.
RESUMEN
A negatively-charged tetraphenylethylene derivative (TPE-SE) was designed and synthesized as turn-on fluorescent sensor for berberine chloride (BBC) detection in aqueous solution. The fluorescent property and detection mechanism were elucidated by UV-vis absorption spectra, photoluminescence spectra, dynamic light scattering experiments. The results reveal that the BBC can lead to aggregation-induced emission of TPE-SE due to the electrostatic interactions, endowing TPE-SE with excellent turn-on detecting ability, high selectivity and sensitivity to BBC. The detection limit is as low as 6.58 × 10-6M. These results should be applicable to fabricate special turn-on fluorescent sensors towards various antibiotics, and it is crucially important for achieving reasonable control and intake of small biomolecules.
Asunto(s)
Berberina , Alcanosulfonatos , Antibacterianos , Cloruros , Colorantes Fluorescentes , Espectrometría de Fluorescencia/métodos , Estilbenos , AguaRESUMEN
Recombination of photogenerated electron-hole pairs dominates the photocarrier lifetime and then influences the performance of photodetectors and solar cells. In this work, we report the design and fabrication of band-aligned van der Waals-contacted photodetectors with atomically sharp and flat metal-semiconductor interfaces through transferred metal integration. A unity factor α is achieved, which is essentially independent of the wavelength of the light, from ultraviolet to near-infrared, indicating effective suppression of charge recombination by the device. The short-circuit current (0.16 µA) and open-circuit voltage (0.72 V) of the band-aligned van der Waals-contacted devices are at least 1 order of magnitude greater than those of band-aligned deposited devices and 2 orders of magnitude greater than those of non-band-aligned deposited devices. High responsivity, detectivity, and polarization sensitivity ratio of 283 mA/W, 6.89 × 1012 cm Hz1/2 W-1, and 3.05, respectively, are also obtained for the device at zero bias. Moreover, the efficient suppression of charge recombination in our air-stable self-powered photodetectors also results in a fast response speed and leads to polarization-sensitive performance.
RESUMEN
The fabrication of graphene/SnS2 van der Waals photodetectors and their photoelectrical properties are systematically investigated. It was found that a dry transferred graphene/SnS2 van der Waals heterostructure had a broadband sensing range from ultraviolet (365 nm) to near-infrared (2.24 µm) and respective improved responsivities and photodetectivities of 7.7 × 103 A/W and 8.9 × 1013 jones at 470 nm and 2 A/W and 1.8 × 1010 jones at 1064 nm. Moreover, positive and negative photoconductance effects were observed when the photodetectors were illuminated by photon sources with energies greater and smaller than the bandgap of SnS2, respectively. The photoresponsivity (R) versus incident power density (P) follows the empirical law R â Pinß, with ß > -1 for positive photoconductance effects and ß < -1 for negative photoconductance effects. On the basis of the Fowler-Nordheim tunneling model and a Poisson and drift-diffusion simulation, we show quantitatively that the barrier height and barrier width of the heterostructure photodetector could be controlled by a laser and an external electrical field through a photogating effect generated by carriers trapped at the interface, which could be used to tune the separation and transport of photogenerated carriers. Our results may be useful for the design of high performance van der Waals heterojunction photodetectors.
RESUMEN
There is an emergent demand for high-flexibility, high-sensitivity and low-power strain gauges capable of sensing small deformations and vibrations in extreme conditions. Enhancing the gauge factor remains one of the greatest challenges for strain sensors. This is typically limited to below 300 and set when the sensor is fabricated. We report a strategy to tune and enhance the gauge factor of strain sensors based on Van der Waals materials by tuning the carrier mobility and concentration through an interplay of piezoelectric and photoelectric effects. For a SnS2 sensor we report a gauge factor up to 3933, and the ability to tune it over a large range, from 23 to 3933. Results from SnS2, GaSe, GeSe, monolayer WSe2, and monolayer MoSe2 sensors suggest that this is a universal phenomenon for Van der Waals semiconductors. We also provide proof of concept demonstrations by detecting vibrations caused by sound and capturing body movements.
RESUMEN
Charge density waves spontaneously breaking lattice symmetry through periodic lattice distortion, and electron-electron and electron-phonon inter-actions, can lead to a new type of electronic band structure. Bulk 2H-TaS2 is an archetypal transition metal dichalcogenide supporting charge density waves with a phase transition at 75â K. Here, it is shown that charge density waves can exist in exfoliated monolayer 2H-TaS2 and the transition temperature can reach 140â K, which is much higher than that in the bulk. The degenerate breathing and wiggle modes of 2H-TaS2 originating from the periodic lattice distortion are probed by optical methods. The results open an avenue to investigating charge density wave phases in two-dimensional transition metal dichalcogenides and will be helpful for understanding and designing devices based on charge density waves.
RESUMEN
Layered materials are highly attractive in gas sensor research due to their extraordinary electronic and physicochemical properties. The development of cheaper and faster room-temperature detectors with high sensitivities especially in the parts per billion level is the main challenge in this rapidly developing field. Here, we show that sensitivity to NO2 (S) can be greatly improved by at least two orders of magnitude using an n-type electrode metal. Unconventionally for such devices, the ln(S) follows the classic Langmuir isotherm model rather than S as is for a p-type electrode metal. Excellent device sensitivities, as high as 13,000% for 9 ppm and 97% for 1 ppb NO2, are achieved with Mn electrodes at room temperature, which can be further tuned and enhanced with the application of a bias. Long-term stability, fast recovery, and strong selectivity toward NO2 are also demonstrated. Such impressive features provide a real solution for designing a practical high-performance layered material-based gas sensor.
RESUMEN
Field-effect transistors derived from traditional 3D semiconductors are rapidly approaching their fundamental limits. Layered semiconducting materials have emerged as promising candidates to replace restrictive 3D semiconductor materials. However, contacts between metals and layered materials deviate from Schottky-Mott behavior when determined by transport methods, while X-ray photoelectron spectroscopy measurements suggest that the contacts should be at the Schottky limit. Here, we present a systematic investigation on the influence of metal selection when electrically contacting SnS2, a layered metal dichalcogenide semiconductor with the potential to replace silicon. It is found that the electrically measured barrier height depends also weakly on the work function of the metal contacts with slopes of 0.09 and -0.34 for n-type and p-type Schottky contacts, respectively. Based on the Kirchhoff voltage law and considering a current path induced by metallic defects, we found that the Schottky barrier still follows the Schottky-Mott limits and the electrically measured barrier height mainly originates from the van der Waals gap between the metal and SnS2, and the slope depends on the magnitude of the van der Waals capacitance.
RESUMEN
Manipulation of magnetization by electric-current-induced spin-orbit torque (SOT) is of great importance for spintronic applications because of its merits in energy-efficient and high-speed operation. An ideal material for SOT applications should possess high charge-spin conversion efficiency and high electrical conductivity. Recently, transition metal dichalcogenides (TMDs) emerge as intriguing platforms for SOT study because of their controllability in spin-orbit coupling, conductivity, and energy band topology. Although TMDs show great potentials in SOT applications, the present study is restricted to the mechanically exfoliated samples with small sizes and relatively low conductivities. Here, a manufacturable recipe is developed to fabricate large-area thin films of PtTe2 , a type-II Dirac semimetal, to study their capability of generating SOT. Large SOT efficiency together with high conductivity results in a giant spin Hall conductivity of PtTe2 thin films, which is the largest value among the presently reported TMDs. It is further demonstrated that the SOT from PtTe2 layer can switch a perpendicularly magnetized CoTb layer efficiently. This work paves the way for employing PtTe2 -like TMDs for wafer-scale spintronic device applications.
RESUMEN
Monolayer MoSe2 is a transition metal dichalcogenide with a narrow bandgap, high optical absorbance and large spin-splitting energy, giving it great promise for applications in the field of optoelectronics. Producing monolayer MoSe2 films in a reliable and scalable manner is still a challenging task as conventional chemical vapor deposition (CVD) or exfoliation based techniques are limited due to the small domains/nanosheet sizes obtained. Here, based on NaCl assisted CVD, we demonstrate the simple and stable synthesis of sub-millimeter size single-crystal MoSe2 monolayers with mobilities ranging from 38 to 8 cm2 V-1 s-1. The average mobility is 12 cm2 V-1 s-1. We further determine that the optical responsivity of monolayer MoSe2 is 42 mA W-1, with an external quantum efficiency of 8.22%.
RESUMEN
GeSn is a group IV alloy material with a narrow bandgap, making it favorable for applications in sensing and imaging. However, strong surface carrier recombination is a limiting factor. To overcome this, we investigate the broadband photoelectrical properties of graphene integrated with doped GeSn, from the visible to the near infrared. It is found that photo-generated carriers can be separated and transported with a higher efficiency by the introduction of the graphene layer. Considering two contrasting arrangements of graphene on p-type and n-type GeSn films, photocurrents were suppressed in graphene/p-type GeSn heterostructures but enhanced in graphene/n-type GeSn heterostructures when compared with control samples without graphene. Moreover, the enhancement (suppression) factor increases with excitation wavelength but decreases with laser power. An enhancement factor of 4 is achieved for an excitation wavelength of 1064 nm. Compared with previous studies, it is found that our graphene/n-type GeSn based photodetectors provide a much wider photodetection range, from 532 nm to 1832 nm, and maintain comparable responsivity. Our experimental findings highlight the importance of the induced bending profile on the charge separation and provides a way to design high performance broadband photodetectors.
RESUMEN
SnSe2 is an anisotropic binary-layered material with rich physics, which could see it used for a variety of potential applications. Here, we investigate the gas-sensing properties of SnSe2 using first-principles calculations and verify predictions using a gas sensor made of few-layer SnSe2 grown by chemical vapor deposition. Theoretical simulations indicate that electrons transfer from SnSe2 to NO2, whereas the direction of charge transfer is the opposite for NH3. Notably, a flat molecular band appears around the Fermi energy after NO2 adsorption and the induced molecular band is close to the conduction band minimum. Moreover, compared with NH3, NO2 molecules adsorbed on SnSe2 have a lower adsorption energy and a higher charge transfer value. The dynamic-sensing responses of SnSe2 sensors confirm the theoretical predictions. The good match between the theoretical prediction and experimental demonstration suggests that the underlying sensing mechanism is related to the charge transfer and induced flat band. Our results provide a guideline for designing high-performance gas sensors based on SnSe2.
Asunto(s)
Técnicas de Química Analítica/instrumentación , Gases/análisis , Límite de Detección , Compuestos de Estaño/química , Transporte de Electrón , Modelos Moleculares , Conformación MolecularRESUMEN
Graphene is a single layer of carbon atoms with a large surface-to-volume ratio, providing a large capacity gas molecule adsorption and a strong surface sensitivity. Chemical vapor deposition-grown graphene-based NO2 gas sensors typically have detection limits from 100 parts per billion (ppb) to a few parts per million (ppm), with response times over 1000 s. Numerous methods have been proposed to enhance the NO2 sensing ability of graphenes. Among them, surface decoration with metal particles and metal-oxide particles has demonstrated the potential to enhance the gas-sensing properties. Here, we show that the NO2 sensing of graphene can be also enhanced via decoration with monodisperse polymer beads. In dark conditions, the detection limit is improved from 1000 to 45 ppb after the application of polystyrene (PS) beads. With laser illumination, a detection limit of 0.5 ppb is determined. The enhanced gas sensing is due to surface plasmon polaritons excited by interference and charge transfer between the PS beads. This method opens an interesting route for the application of graphene in gas sensing.
RESUMEN
Colorectal cancer (CRC) is the most frequently diagnosed cancer and leading cause of cancer-related deaths worldwide. Because of the use of first-line CRC treatments, such as irinotecan (IRI), is hindered by dose-limiting side effects, improved drug delivery systems may have major clinical benefits for CRC treatment. In this study, we generate and characterize liposomal irinotecan (Lipo-IRI), a lipid-based nanoparticle, which shows excellent bioavailability and pharmacokinetics. Additionally, this formulation allows IRI to be maintained in active form and prolongs its half-life in circulation compared to IRI in solution. Compared with IRI statistically, the level of prostaglandin E2 (PGE2) in colonic tissue decreases, and Bifidobacterium spp. (beneficial intestinal microbiota) content increases in the Lipo-IRI-treated group. Moreover, no damage is observed by the hematoxylin and eosin staining of the normal tissue samples from the Lipo-IRI-treated group. In a xenograft mouse model, CRC tumors shrink markedly following Lipo-IRI treatment, and mice receiving a targeted combination of Lipo-IRI and liposomal doxorubicin (Lipo-Dox) extend their survival rate significantly. Overall, our results demonstrate that this formulation of Lipo-IRI shows a great potential for the treatment of colorectal cancer.
RESUMEN
PtS2 is a newly developed group 10 2D layered material with high carrier mobility, wide band gap tunability, strongly bound excitons, symmetrical metallic and magnetic edge states, and ambient stability, making it attractive in nanoelectronic, optoelectronic, and spintronic fields. To the aim of application, a large-scale synthesis is necessary. For transition-metal dichalcogenide (TMD) compounds, a thermally assisted conversion method has been widely used to fabricate wafer-scale thin films. However, PtS2 cannot be easily synthesized using the method, as the tetragonal PtS phase is more stable. Here, we use a specified quartz part to locally increase the vapor pressure of sulfur in a chemical vapor deposition furnace and successfully extend this method for the synthesis of PtS2 thin films in a scalable and controllable manner. Moreover, the PtS and PtS2 phases can be interchangeably converted through a proposed strategy. Field-effect transistor characterization and photocurrent measurements suggest that PtS2 is an ambipolar semiconductor with a narrow band gap. Moreover, PtS2 also shows excellent gas-sensing performance with a detection limit of â¼0.4 ppb for NO2. Our work presents a relatively simple way of synthesizing PtS2 thin films and demonstrates their promise for high-performance ultrasensitive gas sensing, broadband optoelectronics, and nanoelectronics in a scalable manner. Furthermore, the proposed strategy is applicable for making other PtX2 compounds and TMDs which are compatible with modern silicon technologies.
RESUMEN
Recently a SnS2 based NO2 gas sensor with a 30 ppb detection limit was demonstrated but this required high operation temperatures. Concurrently, SnS2 grown by chemical vapor deposition is known to naturally contain nanoscale defects, which could be exploited. Here, we significantly enhance the performance of a NO2 gas sensor based on SnS2 with nanoscale defects by photon illumination, and a detection limit of 2.5 ppb is achieved at room temperature. Using a classical Langmuir model and density functional theory simulations, we show S vacancies work as additional adsorption sites with fast adsorption times, higher adsorption energies, and an order of magnitude higher resistance change compared with pristine SnS2. More interestingly, when electron-hole pairs are excited by photon illumination, the average adsorption time first increases and then decreases with NO2 concentration, while the average desorption time always decreases with NO2 concentration. Our results give a deep understanding of photo-enhanced gas sensing of SnS2 with nanoscale defects, and thus open an interesting window for the design of high performance gas sensing devices based on 2D materials.