RESUMEN
Tert-butylhydroquinone (TBHQ) is easily overused or illegally added to edible oil and attracts a growing concern because of its cytotoxic, liver-damaging, and carcinogenic effects. Thus, a sensitive and intelligent point-of-care testing (iPOCT) method is developed to fulfill the on-site monitoring. This iPOCT method depended on a fluorescent immunochromatographic assay within 15 min. Under optimization, the limit of quantification (LOQ) was calculated as 0.03 µg mL-1. The iPOCT method provided a low limit of detection (LOD) of 0.02 µg mL-1, a wide linear range of 0.03-100 µg mL-1, and great selectivity. Recoveries by the spiking experiments ranged from 97.4% to 103.5% with relative standard deviations (RSDs) of 2.4%-4.9% in soybean, peanut, rapeseed, and corn oil samples. The results showed that the iPOCT method is highly consistent with the high-performance liquid chromatography (HPLC) method.
Asunto(s)
Hidroquinonas , Aceites de Plantas , Teléfono Inteligente , Aceites de Plantas/química , Hidroquinonas/análisis , Hidroquinonas/química , Contaminación de Alimentos/análisis , Pruebas en el Punto de Atención , Límite de Detección , Tiras Reactivas/química , Tiras Reactivas/análisisRESUMEN
The coexistence of multiple contaminates in the environment and food is of growing concern due to their extremely hazard as a well-known class I carcinogen, like aflatoxin B1 (AFB1) and benzo(α)pyrene (BaP). AFB1 and BaP are susceptible to coexistence in environmental water and edible oil, posing a significant potential risk to environmental monitoring and food safety. The remaining challenges in detecting multiple contaminates include unsatisfied sensitivity, insufficient targets selectivity, and interferences in complex matrices. Here, we developed dual-template magnetic molecularly imprinted polymers (DMMIPs) for selective extraction of dual targets in complex matrices from the environment and food. The DMMIPs were fabricated by surface imprinting with vinyl-functionalized Fe3O4 as carrier, 5,7-dimethoxycoumarin and pyrene as dummy templates, and methacrylamide as functional monomer. The DMMIPs showed excellent adsorption ability (12.73-15.80 mg/g), imprinting factors (2.01-2.58), and reusability of three adsorption-desorption cycles for AFB1 and BaP. The adsorption mechanism including hydrogen bond, electrostatic interaction and van der Waals force was confirmed by physical characterization and DFT calculation. Applying DMMIPs in magnetic solid phase extraction (MSPE) followed by high-performance liquid chromatography (HPLC) analysis enabled detection limits of 0.134 µg/L for AFB1 and 0.107 µg/L for BaP. Recovery rates for water and edible oil samples were recorded as 86.2%-110.3% with RSDs of 4.1%-11.9%. This approach demonstrates potential for simultaneous identification and extraction of multiple contaminants in environmental and food.
Asunto(s)
Aflatoxina B1 , Benzo(a)pireno , Contaminación de Alimentos , Polímeros Impresos Molecularmente , Extracción en Fase Sólida , Aflatoxina B1/análisis , Aflatoxina B1/aislamiento & purificación , Aflatoxina B1/química , Contaminación de Alimentos/análisis , Polímeros Impresos Molecularmente/química , Extracción en Fase Sólida/métodos , Extracción en Fase Sólida/instrumentación , Benzo(a)pireno/análisis , Benzo(a)pireno/aislamiento & purificación , Adsorción , Aceites de Plantas/química , Contaminantes Químicos del Agua/aislamiento & purificación , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/química , Impresión Molecular , Polímeros/químicaRESUMEN
As emerging contaminants, microplastics threaten food and environmental safety. Dibutyl phthalate (DBP, released from microplastics) and benzo[a]pyrene (BaP, adsorbed on microplastics) coexisted in food and the environment, harming human health, requesting a sensitive and simultaneous testing method to monitor. To address current sensitivity, simultaneousness, and on-site portability challenges during dual targets in complex matrixes, CuCo2S4/Fe3O4 nanoflower was designed to develop a smartphone-assisted photoelectrochemical point-of-care test (PEC POCT). The carrier transfer mechanism in CuCo2S4/Fe3O4 was proven via density functional theory calculation. Under optimal conditions, the PEC POCT showed low detection limits of 0.126, and 0.132 pg/mL, wide linearity of 0.001-500, and 0.0005-50 ng/mL for DBP and BaP, respectively. The smartphone-assisted PEC POCT demonstrated satisfied recoveries (80.00%-119.63%) in real samples. Coherent results were recorded by comparing the PEC POCT to GC-MS (DBP) and HPLC (BaP). This novel method provides a practical platform for simultaneous POCT for food safety and environment monitoring.
Asunto(s)
Técnicas Electroquímicas , Contaminación de Alimentos , Microplásticos , Teléfono Inteligente , Contaminación de Alimentos/análisis , Microplásticos/análisis , Técnicas Electroquímicas/instrumentación , Técnicas Electroquímicas/métodos , Límite de Detección , Monitoreo del Ambiente/instrumentación , Monitoreo del Ambiente/métodos , Cobre/análisis , Cobre/química , Benzo(a)pireno/análisis , Dibutil Ftalato/análisisRESUMEN
Sound is one of the primary forms of sensory information that we use to perceive our surroundings. Usually, a sound event is a sequence of an audio clip obtained from an action. The action can be rhythm patterns, music genre, people speaking for a few seconds, etc. The sound event classification address distinguishes what kind of audio clip it is from the given audio sequence. Nowadays, it is a common issue to solve in the following pipeline: audio pre-processingâperceptual feature extractionâclassification algorithm. In this paper, we improve the traditional sound event classification algorithm to identify unknown sound events by using the deep learning method. The compact cluster structure in the feature space for known classes helps recognize unknown classes by allowing large room to locate unknown samples in the embedded feature space. Based on this concept, we applied center loss and supervised contrastive loss to optimize the model. The center loss tries to minimize the intra- class distance by pulling the embedded feature into the cluster center, while the contrastive loss disperses the inter-class features from one another. In addition, we explored the performance of self-supervised learning in detecting unknown sound events. The experimental results demonstrate that our proposed open-set sound event classification algorithm and self-supervised learning approach achieve sustained performance improvements in various datasets.
RESUMEN
Sensitive, intelligent point-of-care test (iPOCT) methods for small molecules like aflatoxin B1 (AFB1) are urgently needed for food and the environment. The challenge remains of surface control in iPOCT. Herein, we developed an electrochemical sensor based on the DNA pyramid (DNP), combining a smartphone, app, and mobile electrochemical workstations to detect AFB1. The DNP's structure can reduce local overcrowding and entanglement between neighboring probes, control the density and orientation of recognition probes (antibodies), produce uniform and orientational surface assemblies, and improve antigen-antibody-specific recognition and binding efficiency. Simultaneously, the hollow structure of the DNP enhances the electron transfer capacity and increases the sensitivity of electrochemical detection. In this work, the biosensor based on DNP was first combined with electrochemical (Ec) iPOCT to simultaneously achieve ordered interface modulation of recognition probes and intelligent detection of AFB1. Under optimal conditions, we found a detection limit of 3 pg/mL and a linear range of 0.006-30 ng/mL (R2 = 0.995). Further, using peanut, soybean, corn, and lake water as complex matrices, it recorded recoveries of 82.15-100.53%, excellent selectivity, acceptable stability, and good reproducibility. Finally, this Ec iPOCT provides consistent results compared to the high-performance liquid chromatography-tandem mass spectrometry method.
RESUMEN
As a major hazardous additive released from microplastics and nanoplastics, identifying dibutyl phthalate (DBP) in complex matrices attracts a growing concern in environmental monitoring and food safety. For the first time, Cu2O/Cu3SnS4 nanoflower is prepared and serves as the photoactive material which can be constructed as a smartphone-based photoelectrochemical (PEC) point-of-care test (POCT). Effectively matching energy levels between Cu2O and Cu3SnS4 accelerated the transfer of photogenerated electron-hole pairs, significantly improving the intelligent PEC POCT performance. The novel Cu2O/Cu3SnS4 has proven to be the Z-scheme heterojunction by density functional theory calculation. A competitive immunoassay has been realized on a Cu2O/Cu3SnS4 modified electrode, dramatically decreasing the photocurrent signal and enhancing POCT sensitivity. The smartphone has been used to record and transfer PEC results. Under optimal conditions, the PEC POCT exhibited a satisfying linear range (0.04-400 ng/mL) and a low detection limit of 7.94 pg/mL in real samples, together with excellent stability, repeatability, reproducibility and selectivity. The PEC POCT system provides good performance and practicability in determining DBP in water and edible oil samples. This proposal provides a practical strategy for the intelligent POCT for environment monitoring and food safety.
Asunto(s)
Dibutil Ftalato , Plásticos , Reproducibilidad de los Resultados , Teléfono Inteligente , Pruebas en el Punto de AtenciónRESUMEN
Growing studies focusing on nuclear acid detection via the emerging CRISPR technique demonstrate its promising application. However, limited works solve the identification of non-nucleic acid targets, especially multiple small molecules. To address challenges for point-of-care testing (POCT) in complex matrices for healthcare, environment, and food safety, we developed CRISPR Cas12a-powered highly sensitive, high throughput, intelligent POCT (iPOCT) for multiple small molecules based on a smartphone-controlled reader. As a proof of concept, aflatoxin B1 (AFB1), benzo[a]pyrene (BaP), and capsaicin (CAP) were chosen as multiple targets. First, three antigens were preloaded in independent microwells. Then, the antibody/antigen-induced fluorescent signals were consecutively transferred from the biotin-streptavidin to CRISPR/Cas12a system. Third, the fluorescent signals were recorded by a smartphone-controlled handheld dark-box readout. Under optimization, detection limits in AFB1, BaP, and CAP were 0.00257, 4.971, and 794.6 fg/mL with wide linear ranges up to four orders of magnitude. Using urine, water, soybean oil, wheat, and peanuts as the complex matrix, we recorded high selectivity, considerable recovery, repeatability, and high consistency comparison to HPLC-MS/MS methods. This work promises a practical intelligent POCT platform for multiple targets in lipid-soluble and water-soluble matrices and could be extensively applied for healthcare, environment, and food safety.
Asunto(s)
Técnicas Biosensibles , Sistemas CRISPR-Cas , Espectrometría de Masas en Tándem , Aflatoxina B1 , Capsaicina , Colorantes , Pruebas en el Punto de Atención , Atención a la SaludRESUMEN
Designing a photoelectrochemical (PEC) biosensor with preponderant sensitivity and anti-interference is a challenge for detecting small molecules in real samples with complex matrices. To this end, the Bi2O3/CuBi2O4 was synthesized in one step to enhance visible light's absorption ability, transferring the interfacial carrier's efficiency, a high-active Z-scheme heterojunction, and a photocathode biosensor was proposed. For the first time, we used the density functional theory to verify a Z-scheme transfer pathway of photogenerated electrons in Bi2O3/CuBi2O4 and the energy band structure of Bi2O3 and CuBi2O4, respectively. Bi2O3/CuBi2O4-based PEC biosensor was developed for competive immunoassay of small molecular, aflatoxin B1 (AFB1) as an example, resulting in a low detection limit of 297.4 fg/mL and a linear range of 1.4 pg/mL-280 ng/mL in urine, water, peanut, and wheat samples. Using spiked experiments, the satisfied repeatability, reproducibility, stability, and specificity of the Bi2O3/CuBi2O4-based PEC biosensor indicated a promise for application in health care, the environment, and food.
Asunto(s)
Aflatoxina B1 , Técnicas Biosensibles , Aflatoxina B1/análisis , Técnicas Biosensibles/métodos , Atención a la Salud , Técnicas Electroquímicas/métodos , Límite de Detección , Reproducibilidad de los ResultadosRESUMEN
Hexavalent chromium, namely, Cr(VI), is a significant threat to ecological and food safety. Current detection methods are not sensitive to Cr(VI). A photoelectrochemical (PEC) sensor based on bismuth vanadate (BiVO4) was developed for sensitive detection of Cr(VI). First, BiVO4-X (X: the pH of the reaction precursor solution) was synthesized using a facile surfactant-free hydrothermal method. The BiVO4-X morphology was well controlled according to pH values, showing rock-like (X = 1), wrinkled bark-like (X = 4), carnation-like (X = 7), and the collapsed sheet-like morphologies (X = 9, 12). BiVO4-7 exhibited excellent photoelectric performance due to a proper band structure under visible light and a large specific surface area. Then, BiVO4-7 was used to construct a PEC sensor to detect Cr(VI), which was demonstrated to have a low detection limit (10 nM) and wide detection range (2-210 µM). The BiVO4-7 PEC sensor had a stable output signal, as well as excellent reproducibility, repeatability, and selectivity. We used the BiVO4-7 PEC sensor to detect Cr(VI) in real environmental and food samples, resulting in a satisfactory recovery of 90.3-103.0%, as determined by comparison with results obtained using a spectrophotometric method. The BiVO4-7 PEC sensor is promising for practical application to heavy metal detection in the food and environment.
Asunto(s)
Técnicas Biosensibles , Dianthus , Técnicas Biosensibles/métodos , Cromo/química , Técnicas Electroquímicas , Reproducibilidad de los ResultadosRESUMEN
The aroma-active compounds in the extra, first, and third grades of ylang-ylang essential oils (YYEO) from Comoros and Madagascar were identified by gas chromatography-mass spectrometry with olfactometry (GC-MS/O) using an aroma extract dilution analysis (AEDA) technique. In the previous study, the authors investigated differences in volatile compound profiles between YYEO of different grades and regions using GC coupled with a flame ionization detector (FID) and GC-MS. This study follows up with identification of the aroma-active compounds present in YYEO of various grades from both origins and to profile the aroma of those oils. For the first time, principal component analysis (PCA) on AEDA logarithmic flavor dilution (LFD) data was performed, in comparison with the corresponding PCA on GC-FID-MS data. Based on AEDA data, 21 aroma-active compounds were found across all samples and grades of YYEO, with 8 common ones previously identified by GC-FID. Linalool had the highest odor activity and is the major component of YYEO, followed by geraniol, although the latter only appeared as a much smaller peak in the chromatogram. Other trace compounds such as eugenol and vanillin were also found to be significant to the aroma of YYEO. Using PCA on resulting LFD data, YYEO from Comoros were found to have spicier odor qualities as compared to those from Madagascar. The main contributors that determine the difference in a spicy aroma profile of Comoros and Madagascar oils are vanillin, methyl eugenol, and trans-cinnamyl acetate.
Asunto(s)
Cananga , Aceites Volátiles , Compuestos Orgánicos Volátiles , Quimiometría , Odorantes/análisis , Olfatometría , Extractos VegetalesRESUMEN
Fluorinated graphene/gold nanocage (FGP/AuNC) nanocomposite was developed for simultaneous determination of heavy metals using square wave anodic stripping voltammetry. Under optimized conditions, with a buffer pH of 5.0, a deposition potential of - 1.25 V, and a deposition time of 140 s, the method can obtain the best results. The FGP/AuNC electrode exhibits low limits of detection (0.08, 0.09, 0.05, 0.19, 0.01 µg L-1), wide linear ranges (6-7000, 4-6000, 6-5000, 4-4000, 6-5000 µg L-1), and well-separated stripping peaks (at - 1.10, - 0.77, - 0.50, - 0.01, 0.31 V vs Ag/AgCl) towards Zn2+, Cd2+, Pb2+, Cu2+, and Hg2+, respectively. Furthermore, the FGP/AuNC electrode is also used for simultaneous determination of Zn2+, Cd2+, Pb2+, Cu2+, and Hg2+ in real samples (peanut, rape bolt, and tea). Highly consistent results are found between the electrochemical method and atomic fluorescence spectrometry/inductively coupled plasma-mass spectrometry. The method has been successfully applied to the determination of heavy metal ions in agricultural food. Graphical abstract Schematic representation of simultaneous determination of heavy metal ions by electrochemical method. The FGP/AuNC (fluorinated graphene/gold nanocage) electrode is used to simultaneous determination of Zn2+, Cd2+, Pb2+, Cu2+, and Hg2+ by square wave anode stripping voltammetry.
RESUMEN
Sensitive and point-of-care detection of small toxic molecules plays a key role in food safety. Aflatoxin, a typical small toxic molecule, can cause serious healthcare and economic issues, thereby promoting the development of sensitive and point-of-care detection. Although ELISA is one of the official detection methods, it cannot fill the gap between sensitivity and point-of-care application because it requires a large-scale microplate reader. To employ portable readers in food safety, Pt-catalysis has attracted increasing attention due to its portability and reliability. In this study, we developed a sensitive point-of-care aflatoxin detection (POCAD) method via a portable handheld barometer. We synthesized and characterized Au@PtNPs and Au@PtNPs conjugated with a second antibody (Au@PtNPs-IgG). A competitive immunoassay was established based on the homemade monoclonal antibody against aflatoxins. Au@PtNPs-IgG was used to catalyze the production of O2 from H2O2 in a sealed vessel. The pressure of O2 was then recorded by a handheld barometer. The aflatoxin concentration was inversely proportional to the pressure recorded via the barometer reading. After optimization, a limit of detection of 0.03 ng/mL and a linear range from 0.09 to 16.0 ng/mL were achieved. Recovery was recorded as 83.1%-112.0% along with satisfactory results regarding inner- and inter-assay precision (relative standard deviation, RSD < 6.4%). Little cross-reaction was observed. Additionally, the POCAD was validated by high-performance liquid chromatography (HPLC) by using peanut and corn samples. The portable POCAD exhibits strong potential for applications in the on-site detection of small toxic molecules to ensure food safety.
Asunto(s)
Aflatoxinas/análisis , Arachis/química , Contaminación de Alimentos/análisis , Zea mays/química , Aflatoxinas/inmunología , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/inmunología , Antígenos/análisis , Antígenos/inmunología , Grano Comestible/química , Oro/química , Peróxido de Hidrógeno/química , Inmunoglobulina G/química , Inmunoglobulina G/inmunología , Nanopartículas del Metal/química , Platino (Metal)/química , Sistemas de Atención de Punto , Reproducibilidad de los Resultados , Semillas/químicaRESUMEN
Diacetoxyscirpenol (DAS) is a type A trichothecene mycotoxin with low molecular weight, and with respect to its toxicity and the occurrence in food and feed, it is known as a potential risk for public and animal health. In the present study, first, a sensitive and specific monoclonal antibody (5E7) was developed. Then, the antibody was applied to develop a competitive-type pressure-dependent immunosensor (CTPDI). The Au@PtNP was synthesized and labeled with goat antimouse antibody (Au@PtNPs-IgG). Finally, the concentration of DAS was negatively correlated with the pressure signal. In the presence of optimal conditions, matrix-matched calibration curves were plotted for wheat samples, in which an optimal IC50 value (half maximal inhibitory concentration) of 3.08 ng/g was achieved. The CTPDI was further applied to detect natural and blind wheat samples, and validation was carried out by liquid chromatography-tandem mass spectrometry. The results showed that CTPDI was highly appropriate and accurate for detection of DAS in wheat.
Asunto(s)
Anticuerpos Monoclonales/inmunología , Inmunoensayo/métodos , Límite de Detección , Presión , Tricotecenos/análisis , Triticum/química , Tricotecenos/inmunologíaRESUMEN
A catalyst system comprising CoCl2/IAd·HBF4 enables the Suzuki-Miyaura cross-coupling reaction of a broad range of aryl triflates and arylboronic esters that are activated by n-butyllithium.
RESUMEN
Multiple heavy metals pollution in environment and food has become an ever-increasing concern and poses a serious threat towards humans and animals. To broad the multiple heavy metals detection, Fe3O4 nanoparticles, Fe3O4/multi-walled carbon nanotubes (Fe3O4/MWCNTs) and Fe3O4/fluorinated multi-walled carbon nanotubes (Fe3O4/F-MWCNTs) nanocomposites were synthesized by hydrothermal method and constructed as a simultaneous electrochemical sensor, respectively. Compared the catalytic performances of the three electrochemical sensors for the simultaneous detection of Cd2+, Pb2+, Cu2+, and Hg2+, the results showed that the Fe3O4/F-MWCNTs sensor demonstrated preponderant performance. It showed the sensitivity of 108.79, 125.91, 160.85, and 312.65⯵Aâ¯mM-1 cm-2 toward Cd2+, Pb2+, Cu2+, and Hg2+, respectively, which was obviously higher than that of Fe3O4/MWCNTs and Fe3O4. Additionally, the Fe3O4/F-MWCNTs sensor exhibited the wider linear detection ranges of 0.5-30.0, 0.5-30.0, 0.5-30.0, and 0.5-20.0⯵M for Cd2+, Pb2+, Cu2+, and Hg2+, respectively. The limit of detections of the Fe3O4/F-MWCNTs sensor were 0.05, 0.08, 0.02, and 0.05â¯nM (signal to noise ratio of 3) for Cd2+, Pb2+, Cu2+, and Hg2+, respectively, fulfilling the governmental requests of the World Health Organization, China and Indian. The excellent agreement was recorded between the lowcost Fe3O4/F-MWCNTs sensor and typical methods (inductively coupled plasma mass spectrometry or atomic fluorescence spectrometry) in river water and soybean samples. Additionally, the sensor also exhibited excellent performances in selectivity, recovery, stability, and reproducibility. This proposal sensor provides a promising strategy to monitor multiple targets in the environment and food.
Asunto(s)
Técnicas Electroquímicas/métodos , Contaminantes Ambientales/análisis , Contaminación de Alimentos/análisis , Nanopartículas de Magnetita/química , Metales Pesados/análisis , Nanocompuestos/química , Nanotubos de Carbono/química , Catálisis , Análisis Costo-Beneficio , Técnicas Electroquímicas/economía , Electrodos , Halogenación , Humanos , Límite de Detección , Reproducibilidad de los Resultados , Propiedades de SuperficieRESUMEN
A method is described for the simultaneous voltammetric determination of the heavy metal ions cadmium(II), lead(II), mercury(II), zinc(II), and copper(II) using a glassy carbon electrode (GCE) modified with magnetite (Fe3O4) nanoparticles and fluorinated multiwalled carbon nanotubes (Fe3O4/F-MWCNTs). The Fe3O4/F-MWCNT composite was synthesized by a hydrothermal method and characterized by X-ray photoelectron spectroscopy, X-ray diffraction, transmission electron microscopy, scanning electron microscopy, elemental mapping, electrochemical impedance spectroscopy, and square wave stripping voltammetry. Under the optimum conditions, the electrode displays excellent response to the ions. Figures of merit for Cd(II), Pb(II), Hg(II), Zn(II), and Cu(II), respectively, include (a) high electrochemical sensitivity (29.88, 43.50, 120.86, 47.34 and 90.31 (µA µM-1 cm-2), (b) well separated peaks (at -0.70, -0.53, +0.37, -1.11 and + 0.01 V vs. Ag/AgCl); (c) low limits of detection (0.014, 0.0084, 0.0039, 0.012, and 0.0053 µM); and (d) wide linear ranges (0.048-30.0, 0.028-30.0, 0.013-32.5, 0.039-32.5, and 0.017-31.5 µM). The modified GCE displays satisfying selectivity in the presence of potentially interfering other metal ions, stability for 30 days, and reproducibility of electrodes (with a relative standard deviation between 1.2 and 4.8% for n = 6). The modified GCE was applied to the determination of several heavy metal ions in (spiked) water and rice samples, and the results agreed well with data obtained by atomic fluorescence spectrometry or inductively coupled plasma-mass spectrometry. The dramatic performance probably result from the semi-ionic C-F bond on F-MWCNTs surface with a strong negative charge, the good electrical conductivity of the F-MWCNTs and Fe3O4, the synergistic interaction between Fe3O4 and F-MWCNTs, and the nafion conductive membrane improving the stability of the modified layer and enhanced cation adsorption. Graphical abstract An environmentally-friendly, low-cost, high-throughput Fe3O4/fluorinated multi-walled carbon nanotube composite (Fe3O4/F-MWCNTs) modified glassy carbon electrode is described. It was applied to simultaneous electrochemical determination of Cd(II), Pb(II), Hg(II), Zn(II), and Cu(II) by square wave stripping voltammetry.
RESUMEN
Multiclass chemical contamination of food has aroused ever-increasing attention due to the increasingly common findings of the co-occurrence of multiclass contamination, such as mycotoxin (aflatoxin M1, AFM1) and illegal additive (melamine, MEL). In the present study, a rapid, ultrasensitive detection paper was developed on the basis of a unique bridge-antibody label to realize on-site simultaneous detection of AFM1 and MEL in milk. This detection paper used the bridge-antibody label on fluorescent particles (i.e., the fluorescent Eu nanoparticles were first conjugated with polyclonal antibodies and then with monoclonal antibodies). Dramatically enhanced sensitivity was found, probably due to the increase in immobilization of efficient monoclonal antibodies onto microspheres. Under optimal conditions, the lower limits of detection were 0.009 and 0.024 ng/mL for AFM1 and MEL in milk, respectively, in comparison with similar works. Moreover, the cutoff values were 0.4 and 150 ng/mL for AFM1 and MEL, respectively. The recoveries ranged from 88.7% to 105.0% for AFM1 and from 84.6% to 117.7% for MEL, with relative standard deviations (RSDs) of 0.5-9.9% during the intraday and interday experiments. Comparison experiments conducted using the detection paper, HPLC, and UPLC-MS/MS found excellent agreement in the simultaneous detection of AFM1 and MEL in milk. This proposed method can be extensively employed for simultaneous monitoring of multiclass chemical contaminants to ensure food safety.
Asunto(s)
Aflatoxina M1/análisis , Anticuerpos/química , Aditivos Alimentarios/análisis , Contaminación de Alimentos/análisis , Drogas Ilícitas/análisis , Leche/química , Papel , Animales , Inocuidad de los AlimentosRESUMEN
The structure-activity relationship of expanded-ring N-heterocyclic carbenes (NHCs) in the iron-catalysed Kumada aryl-aryl coupling reaction was explored. This was achieved by comparing the catalytic performance of Fe-NHC catalysts generated in situ containing NHCs that differ in steric bulk. In particular, the influences of ring sizes (5-8) and N-aryl substituents were explored in terms of spectroscopic and structural features, which affect their %Vbur values. The three best performing ligands were found on a diagonal of a 5 × 4 structural matrix revealing an optimal steric bulk and significant influences of subtle steric variations on the catalytic activities.
RESUMEN
The foraging behavior of different bee species is a key factor influencing the pollination efficiency of different crops. Most pear species exhibit full self-incompatibility and thus depend entirely on cross-pollination. However, as little is known about the pear visitation preferences of native Apis cerana (Fabricius; Hymenoptera: Apidae) and adventive Apis mellifera (L.; Hymenoptera: Apidae) in China. A comparative analysis was performed to explore the pear-foraging differences of these species under the natural conditions of pear growing areas. The results show significant variability in the pollen-gathering tendency of these honey bees. Compared to A. mellifera, A. cerana begins foraging at an earlier time of day and gathers a larger amount of pollen in the morning. Based on pollen collection data, A. mellifera shows variable preferences: vigorously foraging on pear on the first day of observation but collecting pollen from non-target floral resources on other experimental days. Conversely, A. cerana persists in pear pollen collection, without shifting preference to other competitive flowers. Therefore, A. cerana outperforms adventive A. mellifera with regard to pear pollen collection under natural conditions, which may lead to increased pear pollination. This study supports arguments in favor of further multiplication and maintenance of A. cerana for pear and other native crop pollination. Moreover, it is essential to develop alternative pollination management techniques to utilize A. mellifera for pear pollination.
Asunto(s)
Abejas/fisiología , Polen , Polinización , Pyrus/fisiología , Animales , Conducta Apetitiva , China , Especies Introducidas , Especificidad de la EspecieRESUMEN
An in situ generated Pd-Cy*Phine catalyst has been successfully applied to the N-arylation of primary and secondary amines, and it exhibited high performance across multiple substrate classes. The performance induced by the meta-terarylphosphine motif of the Cy*Phine ligand for C-N cross-coupling displayed only subtle differences to that of its biarylphosphine congener XPhos. DFT studies demonstrated comparable reaction energetics in the catalytic cycle steps for both Pd-Cy*Phine and Pd-XPhos, which was consistent with previous findings. The computational investigation also indicated that a putative rate-determining step occurred after amine binding, which was likely to have annulled the expected benefits of having a meta-terarylphosphine ligand architecture.