Refinement of the crystal structure of ribonuclease S. Comparison with and between the various ribonuclease A structures.

Ribonuclease S (RNase-S) is a complex that consists of two proteolytic fragments of bovine pancreatic ribonuclease A (RNase-A): the S-peptide (residues 1-20) and S-protein (residues 21-124). We have refined the crystal structures of three RNase-S complexes. The first two contain the full-length 20-residue S-peptide and were studied at pHs of 4.75 and 5.5. The third one consists of a truncated form of S-peptide (residues 1-15) and was studied at pH 4.75 as the reference structure for a series of mutant peptide complexes to be reported separately. Excluding residues 16-23 which are either missing (in the S15 complex) or disordered (in both S20 complexes), all three structures refined at 1.6-A resolution are identical within the estimated errors in the coordinates (0.048 A for the backbone atoms). The R-values, residual error, range from 17.4% to 18.6%. The final model of S20, pH 4.75, includes 1 sulfate and 84 water molecules. The side chains of 11 residues were modeled in two discrete conformations. The final structures were independent of the particular RNase-A or RNase-S used as a starting model. An extensive comparison with refined crystal structures of RNase-A reveals that the core of the molecule which is held together with extensive hydrogen bonds is in identical pattern in all cases. However, the loop regions vary from one structure to another and are often characterized by high B-factors. The pattern of thermal parameters appears to be dependent on crystal packing and correlates well with the accessibility calculated in the crystal. Gln60 is a conserved residue in all sequences known to date for this class of ribonucleases. However, it is the only residue that is clearly defined in an unfavorable position (phi = -100 degrees, psi = -130 degrees) on the Ramachandran plot. The origin of the substantial differences between RNase-A and RNase-S in stability to both acid and temperature denaturation and in susceptibility to proteolysis at neutral pH is not obvious in our visual comparison of these two structures.

Mutation of a single amino acid converts germ cell alkaline phosphatase to placental alkaline phosphatase.

Human placental and germ cell alkaline phosphatases (PLAP and GCAP, respectively), are characterized by their differential sensitivities to inhibition by L-leucine, EDTA, and heat. Yet, they differ by only 7 amino acids at positions 15, 67, 68, 84, 241, 254, and 429 within their respective 484 residues. To determine the structural basis and the amino acid(s) involved in these physicochemical differences, we constructed three GCAP mutants by site-directed mutagenesis and six GCAP/PLAP chimeras and then expressed these alkaline phosphatase mutants in COS-1 cells. We report that the differential reactivity of PLAP and GCAP depends critically on a single amino acid at position 429. GCAP with Gly-429 is strongly inhibited by L-leucine, EDTA, and heat, whereas PLAP with Glu-429 is resistant. By substituting Gly-429 of GCAP with a series of amino acids, we demonstrate that the relative sensitivities of these mutants to L-leucine, EDTA, and heat inhibition are, in general, parallel. Mutants in the order of resistance to these treatments are: Glu (most resistant), Asp/Ile/Leu, Gln/Val/Lys, Ser/His, and Arg/Thr/Met/Cys/Phe/Trp/Tyr/Pro/Asn/Ala/Gly (least resistant). However, the Ser-429 and His-429 mutants were more resistant to EDTA and heat inhibition than the wild-type GCAP, but were equally sensitive to L-leucine inhibition. Structural analysis of mammalian alkaline phosphatase modeled on the refined crystal structure of Escherichia coli alkaline phosphatase indicates that the negative charge of Glu-429 of PLAP, which simultaneously stabilizes the protein as a whole and the metal binding specifically, probably acts through interactions with the metal ligand His-320 (His-331 in E. coli alkaline phosphatase). Replacement of codon 429 with Gly in GCAP leads to destabilization and loosening of the metal binding. The data suggest that the natural binding site for L-leucine may be near position 429, with the amino and carboxyl groups of L-leucine interacting with bound phosphate and His-432 (His-412 in E. coli alkaline phosphatase), respectively.

Reaction mechanism of alkaline phosphatase based on crystal structures. Two-metal ion catalysis.

Alkaline phosphatase (AP) is a widely distributed non-specific phosphomonoesterase that functions through formation of a covalent phosphoseryl intermediate (E-P). The enzyme also catalyzes phosphoryl transfer reaction to various alcohols. Escherichia coli AP is a homodimer with 449 residues per monomer. It is a metalloenzyme with two Zn2+ and one Mg2+ at each active site. The crystal structure of native E. coli AP complexed with inorganic phosphate (Pi), which is a strong competitive inhibitor as well as a substrate for the reverse reaction, has been refined at 2.0 A resolution. Some parts of the molecular have been retraced, starting from the previous 2.8 A study. The active site has been modified substantially and is described in this paper. The changes in the active site region suggest the need to reinterpret earlier spectral data, and suggestions are made. Also presented are the structures of the Cd-substituted enzyme complexed with inorganic phosphate at 2.5 A resolution, and the phosphate-free native enzyme at 2.8 A resolution. At pH 7.5, where the X-ray data were collected, the Cd-substituted enzyme is predominantly the covalent phosphoenzyme (E-P) while the native Zn/Mg enzyme exists in predominantly noncovalent (E.P) form. Implication of these results for the catalytic mechanism of the enzyme is discussed. APs from other sources are believed to function in a similar manner.

Bacillus subtilis alkaline phosphatases III and IV. Cloning, sequencing, and comparisons of deduced amino acid sequence with Escherichia coli alkaline phosphatase three-dimensional structure.

Bacillus subtilis has an alkaline phosphatase multigene family. Two members of this gene family, phoAIII and phoAIV, were cloned, taking advantage of in vitro constructed strains containing a plasmid insertion within one or the other of the structural genes. The DNA sequences of the two genes showed approximately 64% identity at the DNA level and 63% identity in the deduced primary amino acid sequences. The phoAIII and phoAIV genes code for predicted proteins of 47,149 and 45,935 Da, respectively. Comparison of the deduced primary amino acid sequence of the mature proteins with other sequenced alkaline phosphatases from Escherichia coli, yeast, and humans shows 25-30% identity. Based on the refined crystal structure of E. coli alkaline phosphatase, it appears that the active site and the core of the structure are retained in both Bacillus alkaline phosphatases. However, both proteins are truncated at the amino terminus compared with other mature alkaline phosphatases, three sizable surface loops of E. coli are deleted, and a minidomain is replaced with a larger domain in the model. Neither Bacillus alkaline phosphatase sequenced contains any cysteine residues, an amino acid implicated in intrachain disulfide bond formation in other alkaline phosphatases.

Structure of alkaline phosphatases.

The crystal structure of alkaline phosphatase (AP) from Escherichia coli, which is a prototype for mammalian APs, has been refined to a crystallographic R-factor of 0.184 at 2.0 A resolution. During the course of the refinement residues 380 to 410 were retraced and 190 to 200 were shifted by one residue, and substantial changes in the active site of the enzyme were made. Based on the refined structure and the sequences of mammalian enzymes (25-30% strict homology) we have modelled the core of the three dimensional structures of the mammalian alkaline phosphatases. Considerable circumstantial evidence suggests that this is valid despite the fact that the mammalian enzymes are larger, contain carbohydrate and are membrane associated through a phosphatidylinositol moiety. The active site of the molecule is highly conserved but specific changes in the secondary ligands to bound phosphate and the Mg metal are observed.

Crystal structure of muconolactone isomerase at 3.3 A resolution.

The crystal structure of muconolactone isomerase from Pseudomonas putida, a unique molecule with ten 96 amino acid subunits and 5-fold, and 2-fold symmetries, has been solved at 3.3 A resolution. The non-crystallographic symmetries were used to refine the initial single isomorphous replacement phases and produce an interpretable 10-fold averaged map. The backbone trace is complete and confirmed by the amino acid sequence fit. Each subunit is composed of a body with two alpha-helices and an antiparallel twisted beta-sheet of four strands, and an extended arm. The helices and the sheet fold to form a two-layered structure with an enclosed hydrophobic core and a partially formed putative active site pocket. The C-terminal arm of another subunit related by a local dyad symmetry extends over the core to complete this pocket. The decameric protein is almost spherical, with the helices forming the external coat. There is a large hydrophilic cavity in the center with open ends along the 5-fold axis. Molecular interactions between subunits are extensive. Each subunit contacts four neighbors and loses nearly 40% of its solvent contact area on oligomerization.

Refined structure of alkaline phosphatase from Escherichia coli at 2.8 A resolution.

The structure of alkaline phosphatase from Escherichia coli has been determined to 2.8 A resolution. The multiple isomorphous replacement electron density map of the dimer at 3.4 A was substantially improved by molecular symmetry averaging and solvent flattening. From these maps, polypeptide chains of the dimer were built using the published amino acid sequence. Stereochemically restrained least-squares refinement of this model against native data, starting with 3.4 A data and extending in steps to 2.8 A resolution, proceeded to a final overall crystallographic R factor of 0.256. Alkaline phosphatase-phosphomonoester hydrolase (EC 3.1.3.1) is a metalloenzyme that forms an isologous dimer with two reactive centers 32 A apart. The topology of the polypeptide fold of the subunit is of the alpha/beta class of proteins. Despite the similarities in the overall alpha/beta fold with other proteins, alkaline phosphatase does not have a characteristic binding cleft formed at the carboxyl end of the parallel sheet, but rather an active pocket that contains a cluster of three functional metal sites located off the plane of the central ten-stranded sheet. This active pocket is located near the carboxyl ends of four strands and the amino end of the antiparallel strand, between the plane of the sheet and two helices on the same side. Alkaline phosphatase is a non-specific phosphomonoesterase that hydrolyzes small phosphomonoesters as well as the phosphate termini of DNA. The accessibility calculations based on the refined co-ordinates of the enzyme show that the active pocket barely accommodates inorganic phosphate. Thus, the alcoholic or phenolic portion of the substrate would have to be exposed on the surface of the enzyme. Two metal sites, M1 and M2, 3.9 A apart, are occupied by zinc. The third site, M3, 5 A from site M2 and 7 A from site M1, is occupied by magnesium or, in the absence of magnesium, by zinc. As with other zinc-containing enzymes, histidine residues are ligands to zinc site M1 (three) and to zinc site M2 (one). Ligand assignment and metal preference indicate that the crystallographically found metal sites M1, M2 and M3 correspond to the spectroscopically deduced metal sites A, B and C, respectively. Arsenate, a product analog and enzyme inhibitor, binds between Ser102 and zinc sites M1 and M2. The position of the guanidinium group of Arg 166 is within hydrogen-bonding distance from the arsenate site.(ABSTRACT TRUNCATED AT 400 WORDS)

Low resolution crystal structure of muconolactone isomerase. A decamer with a 5-fold symmetry axis.

Muconolactone isomerase from Pseudomonas putida crystallizes from sodium sulfate solution in space group P2(1) (a = 65.84 A, b = 105.70 A, c = 77.20 A, beta = 90.5 degrees) with ten 11,000 Mr subunits per asymmetric unit. The 7 A resolution crystal structure was solved by single isomorphous replacement followed by 10-fold symmetry averaging. The decameric enzyme has an uncommon non-crystallographic 5-fold symmetry axis and a large cavity in its center.

Crystallographic observations of the metal ion triple in the active site region of alkaline phosphatase.

Diffraction analysis reveals three metal ion binding sites, M1, M2 and M3, in each of two symmetric active centers 32 A apart in alkaline phosphatase from Escherichia coli with intermediate distances within the center of 4, 5 and 7 A for M1-M2, M2-M3 and M1-M3, respectively. A fourth site, M4, has been reported 25 A away. Arsenate, a product analog, binds adjacent to M1 and M2. The active serine residue, 102, which is phosphorylated during normal enzymatic turnover, is also adjacent to M1 and M2 and arginine 166 is adjacent to the arsenate. The implication with respect to the mechanism is that M1, M2 and Arg 166 neutralize and redistribute charges within the phosphate group, activate the serine hydroxyl, and stabilize transition states during bond formation and breakage. Three sites, A, B and C, have been deduced from solution studies and defined specifically on the basis of nuclear magnetic resonance data, binding studies and activity data. The evidence suggests correspondence of A to M1, B to M2, and C to M3. Strong antagonism between binding at M1 and M2 is evidenced crystallographically by a pseudo-saturation, which is relieved by phosphate binding. Local destabilization of the protein, particularly residues 323 through 333, is produced by removal of metals from the crystal.