RESUMEN
Lithium cobalt oxide (LCO) has been widely used as a leading cathode material for lithium-ion batteries in consumer electronics. However, unstable cathode electrolyte interphase (CEI) and undesired phase transitions during fast Li+ diffusivity always incur an inferior stability of the high-voltage LCO (HV-LCO). Here, an ultra-thin amorphous titanium dioxide (TiO2) coating layer engineered on LCO by an atomic layer deposition (ALD) strategy is demonstrated to improve the high-rate and long-cycling properties of the HV-LCO cathode. Benefitting from the uniform TiO2 protective layer, the Li+ storage properties of the modified LCO obtained after 50 ALD cycles (LCO-ALD50) are significantly improved. The results show that the average Li+ diffusion coefficient is nearly tripled with a high-rate capability of 125 mAh g-1 at 5C. An improved cycling stability with a high-capacity retention (86.7%) after 300 cycles at 1C is also achieved, far outperforming the bare LCO (37.9%). The in situ XRD and ex situ XPS results demonstrate that the dense and stable CEI induced by the surface TiO2 coating layer buffers heterogenous lithium flux insertion during cycling and prevents electrolyte, which contributes to the excellent cycling stability of LCO-ALD50. This work reveals the mechanism of surface protection by transition metal oxides coating and facilitates the development of long-life HV-LCO electrodes.
RESUMEN
Lithium iron phosphate (LiFePO4, LFP) has become one of the most widely used cathode materials for lithium-ion batteries. The inferior lithium-ion diffusion rate of LFP crystals always incurs poor rate capability and unsatisfactory low-temperature performances. To meet with the requirements from the ever-growing market, it is of great significance to synthesize carbon supported LFP nanocomposite (LFP/C) cathode materials using cost effective and environmentally friendly methods. In this work, an LFP/C cathode material is straightforwardly prepared from a metal-organic framework (MOF) precursor ferric gallate (Fe-GA) using its self-template effect. The Fe-GA precursor is firstly fabricated from the redox coprecipitation reaction between Fe foils and gallic acid (GA) molecules in mild aqueous phase. Then the Fe-GA is directly converted to the LFP/C sample after a following solid-state reaction. In half-cells, the LFP/C composite exhibits a reversible capacity of 109.7 mAh·g-1 after 500 cycles under the current rate of 100 mA·g-1 at 25 °C as well as good rate capabilities. In the LFP/C//graphite full-cells, the LFP/C composite can deliver a reversible capacity of 71.4 mAh·g-1 after 50 cycles in the same condition as the half-cells. The electrochemical performances of the LFP/C cathode in half-cells at lower temperature of -10 °C are also examined. Particularly, the evolution of samples has been explored and the lithium-ion storage mechanism of the LFP/C cathode has been unveiled. The sample synthesis protocol is straightforward, eco-friendly and atomic efficient, which can be considered to have good potential for scaling-up.
RESUMEN
Oxaliplatin is an important initial chemotherapy benefiting advanced-stage colorectal cancer patients. Frustratingly, acquired oxaliplatin resistance always occurs after sequential chemotherapy with diverse antineoplastic drugs. Therefore, an exploration of the mechanism of oxaliplatin resistance formation in-depth is urgently needed. We generated oxaliplatin-resistant colorectal cancer models by four representative compounds, and RNA-seq revealed that oxaliplatin resistance was mainly the result of cells' response to stimulus. Moreover, we proved persistent stimulus-induced endoplasmic reticulum stress (ERs) and associated cellular senescence were the core causes of oxaliplatin resistance. In addition, we screened diverse phytochemicals for ER inhibitors in silico, identifying inositol hexaphosphate (IP6), whose strong binding was confirmed by surface plasmon resonance. Finally, we confirmed the ability of IP6 to reverse colorectal cancer chemoresistance and investigated the mechanism of IP6 in the inhibition of diphthamide modification of eukaryotic elongation factor 2 (eEF2) and PERK activation. Our study demonstrated that oxaliplatin resistance contributed to cell senescence induced by persistently activated PERK and diphthamide modification of eEF2 levels, which were specifically reversed by combination therapy with IP6.
Asunto(s)
Neoplasias Colorrectales , Histidina/análogos & derivados , Ácido Fítico , Humanos , Oxaliplatino/farmacología , Oxaliplatino/uso terapéutico , Ácido Fítico/farmacología , Ácido Fítico/uso terapéutico , Factor 2 de Elongación Peptídica/metabolismo , Neoplasias Colorrectales/tratamiento farmacológico , Neoplasias Colorrectales/genéticaRESUMEN
Downsizing the electrochemically active materials in both cathodic and anodic electrodes commonly brings about enhanced lithium-ion storage performances. It is particularly meaningful to explore simplified and effective strategies for exploiting nanosized electrode materials in the advanced lithium-ion batteries. In this work, the spontaneous reaction between few-layered graphene oxide (GO) and metallic cobalt (Co) foils in mild hydrothermal condition is for the first time employed to synthesize a reduced graphene oxide (RGO) supported nanosized cobalt monoxide (CoO) anode material (CoO@RGO). Furthermore, the CoO@RGO sample is converted to nanosized lithium cobalt oxide cathode material (LiCoO2, LCO) by taking the advantages of the self-templated effect. As a result, both the CoO@RGO anode and the LCO cathode exhibit inspiring lithium-ion storage properties. In half-cells, the CoO@RGO sample maintains a reversible capacity of 740.6 mAh·g-1 after 300 cycles at the current density of 1000 mA·g-1 while the LCO sample delivers a reversible capacity of 109.1 mAh·g-1 after 100 cycles at the current density of 100 mA·g-1. In the CoO@RGO//LCO full-cells, the CoO@RGO sample delivers a reversible capacity of 553.9 mAh·g-1 after 50 cycles at the current density of 200 mA·g-1. The reasons for superior electrochemical behaviors of the samples have been revealed, and the strategy in this work can be considered to be straightforward and effective for engineering both anode and cathode materials for lithium-ion batteries.
RESUMEN
Tin dioxide (SnO2) is widely recognized as a high-performance anode material for lithium-ion batteries. To simultaneously achieve satisfactory electrochemical performances and lower manufacturing costs, engineering nano-sized SnO2 and further immobilizing SnO2 with supportive carbon frameworks via eco-friendly and cost-effective approaches are challenging tasks. In this work, biomass sodium lignosulfonate (LS-Na), stannous chloride (SnCl2) and a small amount of few-layered graphene oxide (GO) are employed as raw materials to engineer a hierarchical carbon framework supported SnO2 nanocomposite. The spontaneous chelation reaction between LS-Na and SnCl2 under mild hydrothermal condition generates the corresponding SnCl2@LS sample with a uniform distribution of Sn2+ in the LS domains, and the SnCl2@LS sample is further dispersed by GO sheets via a redox coprecipitation reaction. After a thermal treatment, the SnCl2@LS@GO sample is converted to the final SnO2/LSC/RGO sample with an improved microstructure. The SnO2/LSC/RGO nanocomposite exhibits excellent lithium-ion storage performances with a high specific capacity of 938.3 mAh/g after 600 cycles at 1000 mA g-1 in half-cells and 517.1 mAh/g after 50 cycles at 200 mA g-1 in full-cells. This work provides a potential strategy of engineering biomass derived high-performance electrode materials for rechargeable batteries.
RESUMEN
Previous studies have indicated that miR-128 was downregulated in a variety of cancers including colorectal cancer (CRC). However, the role and the underlying molecular mechanisms of miR-128 in CRC still remain largely unknown. The aim of this study was to investigate the level of miR-128-1-5p in CRC patients and to explore both the effects and regulatory mechanisms of miR-128-1-5p in the malignancy of CRC. Real-time PCR and western blot were used to analyze the expression levels of miR-128-1-5p and the direct downstream target protein tyrosine kinase C theta isoform (PRKCQ). Cell Counting Kit-8, clone formation, TUNEL apoptosis assays, and subcutaneous tumor model were performed to investigate the malignant ability of colon cancer cells. A luciferase assay was performed to explore whether miR-128-1-5p could directly bind to 3'-UTR region of PRKCQ. In the present study, we detected the decreased expression and clinical significances of miR-128-1-5p in colorectal cancer tissues and cell lines. Functional experiments revealed that miR-128-1-5p inhibited cell proliferation and induced cell apoptosis and that PRKCQ was identified as a target of miR-128-1-5p and involved in miR-128-1-5p-mediated proliferation and apoptosis. In conclusion, our results showed that miR-128-1-5p reduced CRC growth by modulating PRKCQ expression and is a possible new therapeutic target for patients with CRC.
Asunto(s)
Neoplasias Colorrectales , MicroARNs , Humanos , MicroARNs/genética , MicroARNs/metabolismo , Proteína Quinasa C-theta , Línea Celular Tumoral , Neoplasias Colorrectales/patología , Proliferación Celular/genética , Apoptosis/genéticaRESUMEN
Due to the imaging mechanism of hyperspectral images, the spatial resolution of the resulting images is low. An effective method to solve this problem is to fuse the low-resolution hyperspectral image (LR-HSI) with the high-resolution multispectral image (HR-MSI) to generate the high-resolution hyperspectral image (HR-HSI). Currently, the state-of-the-art fusion approach is based on convolutional neural networks (CNN), and few have attempted to use Transformer, which shows impressive performance on advanced vision tasks. In this paper, a simple and efficient hybrid architecture network based on Transformer is proposed to solve the hyperspectral image fusion super-resolution problem. We use the clever combination of convolution and Transformer as the backbone network to fully extract spatial-spectral information by taking advantage of the local and global concerns of both. In order to pay more attention to the information features such as high-frequency information conducive to HR-HSI reconstruction and explore the correlation between spectra, the convolutional attention mechanism is used to further refine the extracted features in spatial and spectral dimensions, respectively. In addition, considering that the resolution of HSI is usually large, we use the feature split module (FSM) to replace the self-attention computation method of the native Transformer to reduce the computational complexity and storage scale of the model and greatly improve the efficiency of model training. Many experiments show that the proposed network architecture achieves the best qualitative and quantitative performance compared with the latest HSI super-resolution methods.
Asunto(s)
Suministros de Energía Eléctrica , Redes Neurales de la ComputaciónRESUMEN
Tin based materials are widely investigated as a potential anode material for lithium-ion batteries. Effectively dispersing SnO2 nanocrystals in carbonaceous supporting skeleton using simplified methods is both promising and challenging. In this work, water soluble chitosan (CS) chains are employed to modulate the redox coprecipitation reaction between stannous chloride (SnCl2) and few-layered graphene oxide (GO), where the excessive restacking of the corresponding reduced graphene oxide sheets (RGO) has been effectively inhibited and the grain size of the in-situ formed SnO2 nanoparticles have been significantly controlled. In particular, the CS molecules are gradually detached from the RGO sheets with the GO deoxygenation process, leaving only a small quantity of CS remnants in the intermediate SnO2@CS@RGO sample. The final SnO2/CSC/RGO sample with significantly improved microstructure is synthesized after a simple thermal treatment, which delivers a high specific capacity of 842.9 mAh g-1 at 1000 mA·g-1 for 1000 cycles in half cells and a specific capacity of 410.5 mAh g-1 at 200 mA·g-1 for 100 cycles in full cells. The reasons for the good lithium-ion storage performances for the SnO2/CSC/RGO composite have been studied.
RESUMEN
Fe based metal organic framework (MOF) materials are being extensively investigated as a precursor sample for engineering carbon supported iron containing nanoparticles composites. Rational design and engineering Fe-containing MOFs with optimized structures using economic and eco-friendly methods is a challenging task. In this work, 1,3,5-benzenetricarboxylic acid (C9H6O6, trimesic acid, H3BTC) and metal Fe are employed to synthesize a MOF sample Fe-BTC in a mild hydrothermal condition. Moreover, with the addition of a small quantity of graphene oxide (GO) as dispersant, a redox coprecipitation reaction has taken place where small Fe-BTC domains well dispersed by reduced graphene oxide (RGO). The Fe-BTC/RGO intermediate sample is finally converted to the hierarchical Fe3O4@C/RGO composite, which delivers an ultrahigh specific capacity of 1262.61 mAh·g-1 at 200 mA·g-1 after 150 cycles and a superior reversible capacity of 910.65 mAh·g-1 at 1000 mA·g-1 after 300 cycles in half cells. The full cell performance for the Fe3O4@C/RGO composite have been studied. It is also revealed that the improved structural stability, high pseudocapacitive contribution and enhanced lithium-ion and electron transportation conditions jointly guarantee the outstanding lithium-ion storage performances for the Fe3O4@C/RGO composite over long-time cycling. The synthesized samples have good potential for wider application.
RESUMEN
Transition metal oxides (TMOs) can provide high theoretical capacitance due to the change of multiple valence states of transition metals. However, their intrinsic drawbacks, including poor electrical conductivity, lower energy density, and huge volume expansion, will result in the pulverization of electrode materials and restricted electrochemical kinetics, thus leading to poor rate capability and rapid capacity fading. Composite electrodes based on transition metal oxides and carbon-based materials are considered to be promising candidates for overcoming these limitations. Herein, we reported a preparation method of hybrid ZIFs derived Zn-doped Co3O4/carbon (Zn-Co3O4/C-230) particles semi-embedded in wood-derived carbon skeleton for integrated electrodes. A large specific surface area, excellent conductivity, and electrochemical stability provide a larger electrochemical activity and potential window for the electrode. Prepared Zn-Co3O4@CW-230 electrode (0.6 mm thick) displays ultrahigh area specific capacitances of 7.83 and 6.46 F cm-2 at the current densities of 5 and 30 mA cm-2, respectively. Moreover, a symmetric supercapacitor assembled by two identical Zn-Co3O4@CW-230 electrodes delivers a superior area-specific capacitance of 2.61 F cm-2 at the current densities of 5 mA cm-2 and great energy densities of 0.36 mWh cm-2 (6.0 mWh cm-3) at 2.5 mW cm-2, while maintaining 97.3% of initial capacitance over 10,000 cycles. It notably outperforms those of most carbon-based metal oxides, endowing the Zn-Co3O4@CW-230 with extensive prospects for practical application.
Asunto(s)
Carbono , Madera , Óxidos , ZincRESUMEN
Graphite anodes are well established for commercial use in lithium-ion battery systems. However, the limited capacity of graphite limits the further development of lithium-ion batteries. Hard carbon obtained from biomass is a highly promising anode material, with the advantage of enriched microcrystalline structure characteristics for better lithium storage. Tannin, a secondary product of metabolism during plant growth, has a rich source on earth. But the mechanism of hard carbon obtained from its derivation in lithium-ion batteries has been little studied. This paper successfully applied the hard carbon obtained from tannin as anode and illustrated the relationship between its structure and lithium storage performance. Meanwhile, to further enhance the performance, graphene oxide is skillfully compounded. The contact with the electrolyte and the charge transfer capability are effectively enhanced, then the capacity of PVP-HC is 255.5 mAh g-1 after 200 cycles at a current density of 400 mA g-1, with a capacity retention rate of 91.25%. The present work lays the foundation and opens up ideas for the application of biomass-derived hard carbon in lithium anodes.
Asunto(s)
Grafito , Litio , Litio/química , Grafito/química , Carbono/química , Taninos , Electrodos , Iones/química , ElectrólitosRESUMEN
Online state-of-charge (SOC) estimation for lithium-ion batteries is one of the most important tasks of the battery management system in ensuring its operation safety and reliability. Due to the advantages of learning the long-term dependencies in between the sequential data, recurrent neural networks (RNNs) have been developed and have shown their superiority over SOC estimation. However, only time-series measurements (e.g., voltage and current) are taken as inputs in these RNNs. Considering that the mapping relationship between the SOC and the time-series measurements evolves along with the battery degradation, there still remains a challenge for RNNs to estimate the SOC accurately throughout the battery's lifetime. In this paper, a dual-input neural network combining gated recurring unit (GRU) layers and fully connected layers (acronymized as a DIGF network) is developed to overcome the above-mentioned challenge. Its most important characteristic is the adoption of the state of health (SOH) of the battery as the network input, in addition to time-series measurements. According to the experimental data from a batch of LiCoO2 batteries, it is validated that the proposed DIGF network is capable of providing more accurate SOC estimations throughout the battery's lifetime compared to the existing RNN counterparts. Moreover, it also shows greater robustness against different initial SOCs, making it more applicable for online SOC estimations in practical situations. Based on these verification results, it is concluded that the proposed DIGF network is feasible for estimating the battery's SOC accurately throughout the battery's lifetime against varying initial SOCs.
RESUMEN
A straightforward and eco-friendly method is demonstrated to engineer magnetite (Fe3O4) nanoparticles well dispersed by an amorphous amylose-derived carbon (AMC) and reduced graphene oxide (RGO) framework. Naturally available amylose (AM) serves as both reducing agent for few-layered graphene oxide (GO) in the first mild redox coprecipitation system and precursor for small-sized pyrolytic AMC in the following thermal treatment. In particular, the presence of the AM molecules effectively limits the crystal growth kinetics for the akaganeite (FeOOH) in the intermediate FeOOH@AM/RGO sample, which contributes to the transformation to Fe3O4 nanoparticles with significantly controlled size in the final Fe3O4@AMC/RGO composite. As a result, both Fe3O4 nanoparticles and AMC domains are adjacently anchored on the larger sized RGO sheets, and a unique hierarchical structure has been engineered in the Fe3O4@AMC/RGO sample. Compared with the controlled Fe3O4@RGO sample, the Fe3O4@AMC/RGO composite exhibits remarkably enhanced initial coulombic efficiency, superior cycling stability and rate performance for lithium-ion storage. The mechanisms of the interaction between GO sheets and AM molecules as well as the inspiring electrochemical behaviors of the Fe3O4@AMC/RGO electrode have been revealed. The Fe3O4@AMC/RGO sample possesses good potential for scaling-up and finding applications in wider fields.
Asunto(s)
Litio , Nanopartículas de Magnetita , Litio/química , Nanopartículas de Magnetita/química , Amilosa , Carbono , Óxido Ferrosoférrico/química , Sustancias Reductoras , IonesRESUMEN
Ferric gallate (Fe-GA), an ancient metal-organic framework (MOF) material, has been recently employed as an eco-friendly and cost-effective precursor sample to synthesize a porous carbon confined nano-iron composite (Fe/RPC), and the Fe element in the Fe/RPC sample could be further oxidized to Fe3O4 nanocrystals in a 180 °C hydrothermal condition. On this foundation, this work reports an optimized approach to engineering a hierarchical one-dimensional porous carbon and two-dimensional reduced graphene oxide (RGO) supporting framework with Fe3O4 nanoparticles well dispersed. Under mild hydrothermal condition, the redox reaction between metal iron atoms from Fe/RPC and surface functional radicals from few-layered graphene oxide sheets (GO) is triggered. As a result, reinforced microstructure and improved atomic efficiency have been achieved for the Fe3O4@RPC/RGO sample. The homogeneously dispersed Fe3O4 nanoparticles with controlled size are anchored on the surface of the larger sized RGO coating layers while the smaller sized RPC domains are embedded between the RGO sheets as spacer. Challenges including spontaneous aggregation of RPC, over exposure of Fe3O4 nanoparticles and excessive restacking of RGO have been significantly inhibited. Furthermore, micro-sized carbon fiber (CF) is chosen as a structural reinforcement additive during electrode fabrication, and the Fe3O4@RPC/RGO sample delivers a good specific capacity of 1170.5 mAh·g-1 under a current rate of 1000 mA·g-1 for 500 cycles in the half cell form. The reasons for superior electrochemical behaviors have been revealed and the lithium-ion storage performances of the Fe3O4@RPC/RGO sample in the full cell form have been preliminarily investigated.
RESUMEN
The tumor microenvironment (TME) is variable across tumor types and has diverse effects on malignant progression, based on the type and number of infiltrating stromal cells. In particular, TME effector genes and their competitive endogenous RNA (ceRNA) networks play a critical role in regulating malignant tumor progression. However, the core effector molecules involved in TME modulation of kidney renal papillary cell carcinoma (KIRP) are poorly understood. To address this question, a cohort containing 233 KIRP patients was derived from The Cancer Genome Atlas (TCGA) database, and the data were processed using the ESTIMATE algorithm. We further evaluated the relationship between immune scores (ISs) and stromal scores (SSs) and disease progression and found that high SSs were associated with a poor prognosis in KIRP. Differentially expressed genes (DEGs) were therefore screened based on SS scores, resulting in 2509 DEGs, including 1668 mRNAs, 783 long noncoding (lnc)RNAs, and 58 micro (mi)RNAs. DEGs were then filtered using the random variance and subjected to hierarchical clustering using EPCLUST. Weighted gene co-expression network analysis (WGCNA) was used to assess the prognostic capacity of these DEGs and identify target ceRNA networks, and lncRNA GUSBP11/miR-432-5p/CAMK2B in the turquoise module was selected as a promising ceRNA network. From this analysis CAMK2B was selected as the core gene predicted to be involved in stromal TMA regulation. We therefore explored the expression and function of CAMK2B in vitro and in vivo and provide evidence that this protein promotes stromal TME remodulation and inhibits proliferation in KIRP. Lastly, we show that vascular endothelial growth factor (VEGF), transforming growth factor (TGF)ß, and close homolog of L1 (CHL1) act as downstream effectors of CAMK2B in KIRP. Thus, in this study, we show that the TME determines prognosis of KIRP patients via the core effector molecule CAMK2B, which mediates both microenvironmental remodeling and tumor progression. Based on these findings, we propose that remodeling of the stromal microenvironment could represent an improved therapeutic approach relative to immunotherapy for KIRP.
RESUMEN
In this work, magnetite nanoparticles (Fe3O4) that are well dispersed by a submicron sized carbon framework in a pomegranate shape are engineered using a flexible one-step spray pyrolysis strategy. Under inert gas atmosphere, the homogeneously mixed Fe3+ ions and chitosan (CS) molecules are in situ transformed to Fe3O4 nanoparticles and spherical nitrogen-doped carbon coating domains, respectively. Moreover, the obtained Fe3O4@C composite exhibits a unique submicron sized pomegranate configuration, in which favorable electric/ionic pathways have been constructed and the Fe3O4 nanoparticles have been effectively dispersed. When used as an anode electrochemical active material, the Fe3O4@C composite exhibits impressive lithium-ion storage capabilities, and maintains a reversible capacity of 500.2 mAh·g-1 after 500 cycles at a high current density of 1000 mA·g-1 as well as good rate capability. The strategy in this work is straightforward and effective, and the synthesized Fe3O4@C material has good potential in wider applications.
RESUMEN
In this work, a rapid coprecipitation reaction is developed to obtain nano-sized Zn-doped tin oxide samples (Zn-SnO-II or Zn-SnO2-IV) for the first time by simply mixing tin ion (Sn2+ or Sn4+) and zinc ion (Zn2+) containing salts in a mild aqueous condition. Characterization results illustrate the Zn-SnO-II sample is constituted by an overwhelming quantity of Zn-doped SnO nanobelts and a small quantity of Zn-doped SnO2 nanoparticles. The redox reaction between the Sn2+ ions from the Zn-SnO-II sample and the surface oxygen-containing functional groups from functionalized carbon nanotube (F-CNT) and graphene oxide (GO) leads to the formation of the final Zn-SnO2/CNT@RGO composites. As an anode active material for lithium-ion batteries, the Zn-SnO2/CNT@RGO product showed superior electrochemical performance than the controlled Zn-SnO2/CNT and Zn-SnO2/RGO samples, which had a high gravimetric capacity of 901.3 mAh·g-1 at a high charge and discharge current of 1000 mA·g-1 after 300 cycles and excellent rate capability. The reaction mechanism for the successful synthesis of the Zn-doped tin oxide samples has been proposed, and the insight into the outstanding lithium-ion storage performance for the Zn-SnO2/CNT@RGO composite has been revealed. The synthetic processes for both the Zn-doped tin oxides and derived carbon supported composites are straightforward and involve no harsh conditions nor complicated treatment, which have good potential for massive production and application in wider fields.
RESUMEN
Immobilizing nanosized electrochemically active materials with supportive carbonaceous framework usually brings in improved lithium-ion storage performance. In this work, magnetite nanoparticles (Fe3O4) are stabilized by both porous carbon domains (PC) and reduced graphene oxide sheets (RGO) to form a hierarchical composite (Fe3O4@PC/RGO) via a straightforward approach. The PC confined iron nanoparticle intermediate sample (Fe@PC) was first fabricated, where sodium carboxymethylcellulose (Na-CMC) was employed not only as a cross-linker to trap ferric ions for synthesizing a Fe-CMC precursor sample, but also as the carbon source for PC domains and iron source for Fe nanoparticles in a pyrolysis process. The final redox reaction between Fe@PC and few-layered graphene oxide (GO) sheets contributed to the formation of Fe3O4 nanoparticles with reduced size, avoiding any severe aggregation or excessive exposure. The Fe3O4@PC/RGO sample delivered a specific capacity of 522.2 mAh·g-1 under a current rate of 1000 mA·g-1 for 650 cycles. The engineered Fe@PC and Fe3O4@PC/RGO samples have good prospects for application in wider fields.
RESUMEN
In this work, a hierarchical reduced graphene oxide (RGO) supportive matrix consisting of both larger two-dimensional RGO sheets and smaller three-dimensional RGO spheres was engineered with ZnO and SnO2 nanoparticles immobilized. The ZnO and SnO2 nanocrystals with controlled size were in sequence engineered on the surface of the RGO sheets during the deoxygenation of graphene oxide sample (GO), where the zinc-containing ZIF-8 sample and metal tin foil were used as precursors for ZnO and SnO2, respectively. After a spray drying treatment and calcination, the final ZnO@SnO2/RGO-H sample was obtained, which delivered an outstanding specific capacity of 982 mAh·g-1 under a high current density of 1000 mA·g-1 after 450 cycles. Benefitting from the unique hierarchical structure, the mechanical strength, ionic and electric conductivities of the ZnO@SnO2/RGO-H sample have been simultaneously promoted. The joint contributions from pseudocapacitive and battery behaviors in lithium-ion storage processes bring in both large specific capacity and good rate capability. The industrially mature spray drying method for synthesizing RGO based hierarchical products can be further developed for wider applications.
RESUMEN
Hepatocellular carcinoma (HCC) is a drastic problem in China. Oxaliplatin, a platinum-based chemotherapy drug, has limited efficacy in treating HCC, characterized by intrinsic and acquired resistance. Inositol hexaphosphate (IP6), a carbohydrate abundant in grains, has contributed to the rising popularity of whole grain products consumption for the potential protection against dozens of diseases. However, the therapeutic potential of IP6 in halting the progression of HCC remains unclear, especially in combination with oxaliplatin. The anti-proliferation and anti-migration effects of IP6 were evaluated in vitro and in vivo. The synergistic and sequential anti-proliferative effect with IP6 and oxaliplatin were also evaluated in HCC. Finally, the role of CCN2-LRP6-ß-catenin-ABCG1 signaling in oxaliplatin resistance and IP6 treatment was evaluated. We proved that IP6 treatment exhibited independent anticancer effect and synergistic anti-proliferative effects in combination with oxaliplatin in HCC. Specifically, up-regulation of ABCG1 and CCN2 were associated with oxaliplatin resistance. ABCG1 was acting as a downstream molecule of the CCN2-LRP6-Wnt/ß-catenin signaling pathway in HCC cells. The IP6 treatment exhibited inhibition of CCN2-LRP6-Wnt/ß-catenin signaling pathway and downregulation of ABCG1 in HCC cells. When combined with ABCG1 knocking down in HCC cells, the anti-proliferative effect of oxaliplatin was partly impaired in combination with IP6. We suggested that IP6 treatment renders HCC sensitive to oxaliplatin and breaking the CCN2-LRP6-ß-catenin-ABCG1 signaling pathway is one of the mechanism after IP6 treatment.