RESUMEN
Flexible electrochromic devices (FECDs) are widely explored for diverse applications including wearable electronics, camouflage, and smart windows. However, the manufacturing process of patterned FECDs remains complex, costly, and non-customizable. To address this challenge, a strategy is proposed to prepare integrated FECDs via multi-material direct writing 3D printing. By designing novel viologen/polyvinyl alcohol (PVA) hydrogel inks and systematically evaluating the printability of various inks, seamless interface integration can be achieved, enabling streamlined manufacturing of patterned FECDs with continuous production capabilities. The resultant 3D-printed FECDs exhibit excellent electrochromic and mechanical properties, including high optical contrast (up to 54% at 360 nm), nice cycling stability (less than 5% electroactivity reduction after 10 000 s), and mechanical stability (less than 19% optimal contrast decrease after 5000 cycles of bending). The potential applications of these 3D-printed hydrogel-based FECDs are further demonstrated in wearable electronics, camouflage, and smart windows.
RESUMEN
Microplastics (MPs) are emerging contaminants that are attracting increasing interest from researchers, and the safety of drinking water is greatly affected by their transportation during filtration. Polystyrene (PS) was selected as a representative MPs, and three filter media (quartz sand, zeolite, and anthracite) commonly found in water plants were used. The retention patterns of PS-MPs by various filter media under various background water quality conditions were methodically investigated with the aid of DLVO theory and colloidal filtration theory. The results show that the different structures and elemental compositions of the three filter media cause them to exhibit different surface roughnesses and surface potentials. A greater surface roughness of the filter media can provide more deposition sites for PS-MPs, and the greater surface roughness of zeolite and anthracite significantly enhances their ability to inhibit the migration of PS-MPs compared with that of quartz sand. However, surface roughness is not the only factor affecting the migration of MPs. The lower absolute value of the surface potential of anthracite causes the DLVO energy between it and PS-MPs to be significantly lower than that between zeolite and PS-MPs, which results in stronger retention of PS-MPs by anthracite, which has a lower surface roughness, than zeolite, which has a higher surface roughness. The transport of PS-MPs in the medium is affected by the combination of the surface roughness of the filter media and the DLVO energy. Under the same operating conditions, the retention efficiencies of the three filter materials for PS-MPs followed the order of quartz sand < zeolite < anthracite. Additionally, the conditions of the solution markedly influenced the transport ability of PS-MPs within the simulated filter column. The transport PS-MPs in the simulated filter column decreased with increasing solution ionic strength and cation valence. Naturally, dissolved organic matter promoted the transfer of PS-MPs in the filter layer, and humic acid had a much stronger facilitating impact than fulvic acid. The study findings might offer helpful insight for improving the ability of filter units ability to retain MPs.
Asunto(s)
Filtración , Microplásticos , Poliestirenos , Zeolitas , Zeolitas/química , Poliestirenos/química , Microplásticos/química , Cuarzo/química , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisis , Arena/química , Purificación del Agua/métodos , Propiedades de SuperficieRESUMEN
A promising electrochemical sensing platform for the detection of ponceau 4R in food has been fabricated based on the carboxylated graphene oxide (GO-COOH), metal-organic framework (MOF) UIO-66-NH2, and poly (3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). To this end GO-COOH was covalently coupled with UIO-66-NH2 through amide reaction, endowing the material (GO-CONH-UIO-66) unique hierarchical pores and high chemical stability and as a result improving the conductivity of MOF and the dispersion of GO. After the addition of PEDOT:PSS into GO-CONH-UIO-66, the continuity and conductivity of the composite (PEDOT:PSS/GO-CONH-UIO-66) have been further enhanced, due to the high conductivity, favorable film-forming, and hydrophilic properties of PEDOT:PSS. Systematic electrochemical experiments confirm that the PEDOT:PSS/GO-CONH-UIO-66/GCE shows satisfactory electrochemical sensing properties towards the detection of ponceau 4R, with a wide linear detection range of 0.01-30 µM, a low limit of detection of 3.33 nM, and a high sensitivity of 0.606 µA µM-1 cm-2. The PEDOT:PSS/GO-CONH-UIO-66 sensing platform was successfully used to detect ponceau 4R in beverage, and the detection results were compared with high-performance liquid chromatography. As a result, the PEDOT:PSS/GO-CONH-UIO-66 composite shows a promising application prospect for rapid detection of ponceau 4R in food and will play significant role in food safety detection and supervision.
RESUMEN
Precisely detecting trace pesticides and their residues in food products is crucial for ensuring food safety. Herein, a high-performance electrochemical sensing platform was developed for the detection of carbendazim (CBZ) using Co,N co-doped hollow carbon nanocage@carbon nanotubes (Co,N-HC@CNTs) obtained from core-shell ZIF-8@ZIF-67 combined with a poly(3,4-ethylenedioxythiophene) (PEDOT) molecularly imprinted polymer (MIP). The Co,N-HC@CNTs exhibited excellent electrocatalytic performance, benefitting from the synergistic effect of CNTs that provide a large specific surface area and excellent electrical conductivity, Co,N co-doped carbon nanocages that offer high electrocatalytic activity and hollow nanocage structures that ensure rapid diffusion kinetics. The conductive PEDOT-MIP provided specific binding sites for CBZ detection and significantly amplified the detection signal. The sensor showed superior selectivity for CBZ with an extremely low detection limit of 1.67 pmol L-1. Moreover, the method was successfully applied to detect CBZ in tomato, orange and apple samples, achieving satisfactory recovery and accuracy, thus demonstrating its practical feasibility.
Asunto(s)
Bencimidazoles , Compuestos Bicíclicos Heterocíclicos con Puentes , Carbamatos , Técnicas Electroquímicas , Electrodos , Contaminación de Alimentos , Nanotubos de Carbono , Polímeros , Compuestos Bicíclicos Heterocíclicos con Puentes/química , Técnicas Electroquímicas/instrumentación , Nanotubos de Carbono/química , Carbamatos/análisis , Carbamatos/química , Polímeros/química , Contaminación de Alimentos/análisis , Bencimidazoles/química , Bencimidazoles/análisis , Polímeros Impresos Molecularmente/química , Límite de Detección , Impresión Molecular , Malus/química , Solanum lycopersicum/química , Citrus sinensis/químicaRESUMEN
PEDOT: PSS hydrogel-based bioelectronic interfaces have gained significant attention in various fields including biomedical devices, wearable devices, and epidermal electronics. However, the development of high-performance bioelectronic interfaces that integrate excellent conductivity, strong adhesion, and advanced processing compatibility remains a challenge. Herein, we develop a high-performance bioelectronic interface by 3D printing of a novel poly(vinyl alcohol-formaldehyde) (PVAF)-PEDOT:PSS composite ink. Such a PEDOT:PSS-PVAF ink exhibits favorable rheological properties for direct-ink-writing 3D printing, enabling the fabrication of high-resolution patterns and three-dimensional structures with high aspect ratios. Hydrogel bioelectronic interface printed by such PEDOT:PSS-PVAF ink simultaneously achieves high conductivity (over 100 S m-1), strong adhesion (31.44 ± 7.07 kPa), as well as stable electrochemical performance (charge injection capacity of 13.72 mC cm-2 and charge storage capacity of 18.80 mC cm-2). We further integrate PEDOT:PSS-PVAF hydrogel bioelectronic interface to fabricate adhesive skin electrodes for electromyography (EMG) signal recording. The resultant EMG skin electrodes demonstrate superior performance and stability compared to commercial products, maintaining high signal-to-noise ratio of > 10 dB under varying weights and repetitive motions. These advantageous performance of PEDOT:PSS-PVAF based hydrogel bioelectronic interfaces may be helpful for diverse bioelectronic applications like healthcare monitoring and epidermal bioelectronics.
RESUMEN
Aqueous zinc-ion batteries (AZIBs) based on vanadium oxides or sulfides are promising candidates for large-scale rechargeable energy storage due to their ease of fabrication, low cost, and high safety. However, the commercial application of vanadium-based electrode materials has been hindered by challenging problems such as poor cyclability and low-rate performance. To this regard, sophisticated nanostructure engineering technology is used to adeptly incorporate VS2 nanosheets into the MXene interlayers to create a stable 2D heterogeneous layered structure. The MXene nanosheets exhibit stable interactions with VS2 nanosheets, while intercalation between nanosheets effectively increases the interlayer spacing, further enhancing their stability in AZIBs. Benefiting from the heterogeneous layered structure with high conductivity, excellent electron/ion transport, and abundant reactive sites, the free-standing VS2/Ti3C2Tz composite film can be used as both the cathode and the anode of AZIBs. Specifically, the VS2/Ti3C2Tz cathode presents a high specific capacity of 285 mAh g-1 at 0.2 A g-1. Furthermore, the flexible Zn-metal free in-plane VS2/Ti3C2Tz//MnO2/CNT AZIBs deliver high operation voltage (2.0 V) and impressive long-term cycling stability (with a capacity retention of 97% after 5000 cycles) which outperforms almost all reported Vanadium-based electrodes for AZIBs. The effective modulation of the material structure through nanocomposite engineering effectively enhances the stability of VS2, which shows great potential in Zn2+ storage. This work will hasten and stimulate further development of such composite material in the direction of energy storage.
RESUMEN
Conducting polymers (CPs), a significant class of electrochemical capacitor electrode materials, exhibit exceptional capacitive energy storage performance in aqueous electrolytes. Current research primarily concentrates on enhancing the electrical conductivity and capacitive performance of CPs via molecular design and structural control. However, the absence of a comprehensive understanding of the impact of molecular chain spatial order on ion/electron transport and capacitive performance impedes the development and optimization of advanced electrode materials. Here, a solvent treatment strategy is employed to modulate the molecular chain spatial order of PEDOT : PSS films. The results of electrochemical performance tests and Grazing Incidence Wide Angle X-ray Scattering (GIWAXS) show that Poly(3,4-ethylenedioxythiophene) : poly(styrenesulfonic acid) (PEDOT : PSS) films with both face-on and edge-on orientations exhibit exceptional electronic conductivity and ion diffusion efficiency, with capacitive performance 1.33â times higher than that of PEDOT : PSS films with only edge-on orientation. Consequently, molecular chain orientations conducive to charge transport not only enhance inter-chain coupling, but also effectively reduce ion transport resistance, enabling efficient capacitive energy storage. This research provides novel insights for the design and development of higher performance CPs-based electrode materials.
RESUMEN
We experimentally study two-body Coulomb explosions of CO2, O2, and CH3Cl molecules in intense femtosecond laser pulses. We observe an obvious variation in the ionic angular distribution of the fragments with respect to the kinetic energy releases (KERs). Using a classical model based on ab initio potential energy curves, we find that the dependence of the ionic angular distribution on the KER is relevant to the fact that the accurate potential energy deviates significantly from the value determined by applying the Coulomb interaction approximation at a relatively small internuclear distance of the molecule. We show that the KER-dependent ionic angular distribution provides an effective way to determine the critical internuclear distance at which the Coulomb interaction approximation holds or breaks down without relying on the knowledge of the accurate potential energy curves.
RESUMEN
Electrical bioadhesive interface (EBI), especially conducting polymer hydrogel (CPH)-based EBI, exhibits promising potential applications in various fields, including biomedical devices, neural interfaces, and wearable devices. However, current fabrication techniques of CPH-based EBI mostly focus on conventional methods such as direct casting, injection, and molding, which remains a lingering challenge for further pushing them toward customized practical bioelectronic applications and commercialization. Herein, 3D printable high-performance CPH-based EBI precursor inks are developed through composite engineering of PEDOT:PSS and adhesive ionic macromolecular dopants within tough hydrogel matrices (PVA). Such inks allow the facile fabrication of high-resolution and programmable patterned EBI through 3D printing. Upon successive freeze-thawing, the as-printed PEDOT:PSS-based EBI simultaneously exhibits high conductivity of 1.2 S m-1 , low interfacial impedance of 20 Ω, high stretchability of 349%, superior toughness of 109 kJ m-3 , and satisfactory adhesion to various materials. Enabled by these advantageous properties and excellent printability, the facile and continuous manufacturing of EBI-based skin electrodes is further demonstrated via 3D printing, and the fabricated electrodes display excellent ECG and EMG signal recording capability superior to commercial products. This work may provide a new avenue for rational design and fabrication of next-generation EBI for soft bioelectronics, further advancing seamless human-machine integration.
RESUMEN
Metal ions have great significance for agricultural development, food safety, and human health. In turn, there exists an imperative need for the development of novel, sensitive, and reliable sensing techniques for various metal ions. Agricultural sensors for the diagnosis of both agricultural safety and nutritional health can establish quality and safety traceability systems of both agro-products and food to guarantee human health, even life safety. Metal-organic frameworks (MOFs) are utilized widely for the design of diversified sensors due to their distinctive structural characteristics and extraordinary optical and electrical properties. To serve agricultural sensors better, this review is dedicated to providing a brief overview of the synthesis of MOFs, the modification of MOFs, the fabrication of MOF-based film electrodes, the applications of MOF-based agricultural sensors for metal ions, which are centered on electrochemical sensors and optical sensors, and current challenges of MOF-based agricultural sensors. In addition, this review also provides potential future opportunities for the development and practical application of agricultural sensors.
RESUMEN
Strain sensors based on conducting polymer hydrogels are considered highly promising candidates for wearable electronic devices. However, existing conducting polymer hydrogels are susceptible to aging, damage, and failure, which can greatly deteriorate the sensing performance of strain sensors based on these substances and the accuracy of data collection under large deformation. Developing conductive polymer hydrogels with concurrent high sensing performance and self-healing capability is a critical yet challenging task to improve the stability and lifetime of strain sensors. Herein, we design a self-healable conducting polymer hydrogel by compositing poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) nanofibers and poly(vinyl alcohol) (PVA) via both physical and chemical crosslinking. This PEDOT:PSS-PVA nanocomposite hydrogel strain sensor displays an excellent strain monitoring range (>200%), low hysteresis (<1.6%), a high gauge factor (GF = 3.18), and outstanding self-healing efficiency (>83.5%). Electronic skins based on such hydrogel strain sensors can perform the accurate monitoring of various physiological signals, including swallowing, finger bending, and knee bending. This work presents a novel conducting polymer hydrogel strain sensor demonstrating both high sensing performance and self-healability, which can satisfy broad application scenarios, such as wearable electronics, health monitoring, etc.
RESUMEN
Solar-driven interfacial evaporation and purification is a promising solar energy conversion technology to produce clean water or solve water scarcity. Although wood-based photothermal materials have attracted particular interest in solar water purification and desalination due to their rapid water supply and great heat localization, challenges exist given their complicated processing methods and relatively poor stability. Herein, we propose a facile approach for fabricating a bilayered wood-poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (wood-PEDOT:PSS) hydrogel interfacial evaporator by direct drop-casting and dry-annealing. Benefiting from the unique combined merits of the wood-PEDOT:PSS hydrogel evaporator, i.e., excellent light absorption (~99.9%) and efficient photothermal conversion of nanofibrous PEDOT:PSS and the strong hydrophilicity and fast water transport from wood, the as-fabricated bilayered wood-PEDOT:PSS hydrogel evaporator demonstrates a remarkably high evaporation rate (~1.47 kg m-2 h-1) and high energy efficiency (~75.76%) at 1 kW m-2. We further demonstrate the practical applications of such an evaporator for sewage purification and desalination, showing outstanding performance stability and partial salt barrier capability against a continuous 10-day test in simulated seawater and an ultrahigh ion removal rate of 99.9% for metal ion-containing sewage. The design and fabrication of such novel, efficient wood-based interfacial evaporators pave the way for large-scale applications in solar water purification.
RESUMEN
Owing to the unique combination of electrical conductivity and tissue-like mechanical properties, conducting polymer hydrogels have emerged as a promising candidate for bioelectronic interfacing with biological systems. However, despite the recent advances, the development of hydrogels with both excellent electrical and mechanical properties in physiological environments is still challenging. Here we report a bi-continuous conducting polymer hydrogel that simultaneously achieves high electrical conductivity (over 11 S cm-1), stretchability (over 400%) and fracture toughness (over 3,300 J m-2) in physiological environments and is readily applicable to advanced fabrication methods including 3D printing. Enabled by these properties, we further demonstrate multi-material 3D printing of monolithic all-hydrogel bioelectronic interfaces for long-term electrophysiological recording and stimulation of various organs in rat models.
Asunto(s)
Hidrogeles , Polímeros , Animales , Ratas , Conductividad Eléctrica , Impresión TridimensionalRESUMEN
Supercapacitors are widely used in various fields due to their high power density, fast charging and discharging speeds, and long service life. However, with the increasing demand for flexible electronics, integrated supercapacitors in devices are also facing more challenges, such as extensibility, bending stability, and operability. Despite many reports on stretchable supercapacitors, challenges still exist in their preparation process, which involves multiple steps. Therefore, we prepared stretchable conducting polymer electrodes by depositing thiophene and 3-methylthiophene on patterned 304 stainless steel (SS 304) through electropolymerization. The cycling stability of the prepared stretchable electrodes could be further improved by protecting them with poly(vinyl alcohol)/sulfuric acid (PVA/H2SO4) gel electrolyte. Specifically, the mechanical stability of the polythiophene (PTh) electrode was improved by 2.5%, and the stability of the poly(3-methylthiophene (P3MeT) electrode was improved by 7.0%. As a result, the assembled flexible supercapacitors maintained 93% of their stability even after 10,000 cycles of strain at 100%, which indicates potential applications in flexible electronics.
RESUMEN
In this work, TiO2-MXene/poly (3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) composite was utilized as an electrode material for the sensitive electrochemical detection of baicalein. The in-situ growth of TiO2 nanoparticles on the surface of MXene nanosheets can effectively prevent their aggregation, thus presenting a significantly large specific surface area and abundant active sites. However, the partial oxidation of MXene after calcination could reduce its conductivity. To address this issue, herein, PEDOT:PSS films were introduced to disperse the TiO2-MXene materials. The uniform and dense films of PEDOT:PSS not only improved the conductivity and dispersion of TiO2-MXene but also enhanced its stability and electrocatalytic activity. With the advantages of a composite material, TiO2-MXene/PEDOT:PSS as an electrode material demonstrated excellent electrochemical sensing ability for baicalein determination, with a wide linear response ranging from 0.007 to 10.0 µM and a lower limit of detection of 2.33 nM. Furthermore, the prepared sensor displayed good repeatability, reproducibility, stability and selectivity, and presented satisfactory results for the determination of baicalein in human urine sample analysis.
Asunto(s)
Flavanonas , Humanos , Reproducibilidad de los Resultados , Flavanonas/orinaRESUMEN
Graphdiyne (GDY) has attracted a lot of interest in electrochemical sensing application with the advantages of a large conjugation system, porous structure, and high structure defects. Herein, to further improve the sensing effect of GDY, conductive MWCNTs were chosen as the signal accelerator. To get a stable composite material, polydopamine (PDA) was employed as connecting bridge between GDY and MWCNTs-NH2, where DA was firstly polymerized onto GDY, followed by covalently linking MWCNTs-NH2 with PDA through Michael-type reaction. The formed GDY@PDA/MWCNTs-NH2 composite was then explored as an electrochemical sensor for benomyl (Ben) determination. GDY assists the adsorption and accumulation of Ben molecules to the sensing surface, while MWCNTs-NH2 can enhance the electrical conductivity and electrocatalytic activity, all of which contributing to the significantly improved performance. The proposed sensor displays an obvious oxidation peak at 0.72 V (vs. Hg|Hg2Cl2) and reveals a wide linear range from 0.007 to 10.0 µM and a low limit of detection (LOD) of 1.8 nM (S/N = 3) toward Ben detection. In addition, the sensor shows high stability, repeatability, reproducibility, and selectivity. The feasibility of this sensor was demonstrated by detecting Ben in apple and cucumber samples with a recovery of 94-106% and relative standard deviations (RSDs) less than 2.3% (n = 5). A sensitive electrochemical sensing platform was reported for benomyl (Ben) determination based on a highly stable GDY@PDA/MWCNTs-NH2 composite.
Asunto(s)
Nanotubos de Carbono , Nanotubos de Carbono/química , Técnicas Electroquímicas , Benomilo , Reproducibilidad de los ResultadosRESUMEN
Four novel isoindigo-thiophene D-A-D-type precursors are synthesized by Stille coupling and electrosynthesized to yield corresponding hybrid polymers with favorable electrochemical and electrochromic performances. Intrinsic structure-property relationships of precursors and corresponding polymers, including surface morphology, band gaps, electrochemical properties, and electrochromic behaviors, are systematically investigated. The resultant isoindigo-thiophene D-A-D-type polymer combines the merits of isoindigo and polythiophene, including the excellent stability of isoindigo-based polymers and the extraordinary electrochromic stability of polythiophene. The low onset oxidation potential of precursors ranges from 1.10 to 1.15 V vs. Ag/AgCl, contributing to the electrodeposition of high-quality polymer films. Further kinetic studies illustrate that isoindigo-thiophene D-A-D-type polymers possess favorable electrochromic performances, including high optical contrast (53%, 1000 nm), fast switching time (0.8 s), and high coloration efficiency (124 cm2 C-1). These features of isoindigo-thiophene D-A-D-type conjugated polymers could provide a possibility for rational design and application as electrochromic materials.
Asunto(s)
Polímeros , Tiofenos , CinéticaRESUMEN
Improving the electrocatalytic performance by modulating the surface and interface electronic structure of noble metals is still a research hotspot in electrocatalysis. Herein, we prepared the heterogeneous catalyst based on the well-dispersed PdCu nanoalloy and the N-doped Ti3C2Tx MXene support (PdCu/N-Ti3C2Tx) via in situ growth of PdCu nanoparticles on the fantastic N-Ti3C2Tx sheets. By exploring the electrocatalytic properties of ethanol oxidation reaction (EOR), the composition optimized Pd1Cu1/N-Ti3C2Tx delivers higher mass activity/specific activity/intrinsic activity (2200.7 mA mgPd-1/13.1 mA cm-2/2.2 s-1), anti-poisoning ability and stability than those of Pd/N-Ti3C2Tx, Pd1Cu1/Ti3C2Tx and commercial Pd/C, which can be attributed to the modified surface electronic features of Pd by the participation of Cu atoms and N-Ti3C2Tx MXene, as well as the "metal-carrier" effect between the PdCu nanoalloy and N-Ti3C2Tx heterogeneous interface. Furthermore, the conductivity of N-Ti3C2Tx MXene can be improved by N-doping, and the abundant terminal groups (-O, -OH, -F and N) on the N-Ti3C2Tx surface can promote the electron exchange between PdCu and N-Ti3C2Tx. This work provides an effective strategy for engineering heterogeneous electrocatalysts for enhanced electrocatalytic EOR by adjusting the interfacial electronic structure of noble metals.
RESUMEN
Conducting polymers are emerging as promising neural interfaces towards diverse applications such as deep brain stimulation due to their superior biocompatibility, electrical, and mechanical properties. However, existing conducting polymer-based neural interfaces still suffer from several challenges and limitations such as complex preparation procedures, weak interfacial adhesion, poor long-term fidelity and stability, and expensive microfabrication, significantly hindering their broad practical applications and marketization. Herein, we develop an adhesive and long-term stable conducting polymer neural interface by a simple two-step electropolymerization methodology, namely, the pre-polymerization of polydopamine (PDA) as an adhesive thin layer followed by electropolymerization of hydroxymethylated 3,4-ethylenedioxythiophene (EDOT-MeOH) with polystyrene sulfonate (PSS) to form stable interpenetrating PEDOT-MeOH:PSS/PDA networks. As-prepared PEDOT-MeOH:PSS/PDA interface exhibits remarkably improved interfacial adhesion against metallic electrodes, showing 93% area retention against vigorous sonication for 20 min, which is one of the best tenacious conducting polymer interfaces so far. Enabled by the simple methodology, we can facilely fabricate the PEDOT-MeOH:PSS/PDA interface onto ultrasmall Pt-Ir wire microelectrodes (diameter: 10 µm). The modified microelectrodes display two orders of magnitude lower impedance than commercial products, and also superior long-term stability to previous reports with high charge injection capacity retention up to 99.5% upon 10,000,000 biphasic input pulse cycles. With these findings, such a simple methodology, together with the fabricated high-performance and stable neural interface, can potentially provide a powerful tool for both advanced neuroscience researches and cutting-edge clinical applications like brain-controlled intelligence.
Asunto(s)
Compuestos Bicíclicos Heterocíclicos con Puentes , Polímeros , MicroelectrodosRESUMEN
Co3 O4 with high theoretical capacitance is a promising electrode material for high-end energy applications, yet the unexcited bulk electrochemical activity, low conductivity, and poor kinetics of Co3 O4 lead to unsatisfactory charge storage capacity. For boosting its energy storage capability, rare earth (RE)-doped Co3 O4 nanostructures with abundant oxygen vacancies are constructed by simple, economical, and universal chemical precipitation. By changing different types of RE (RE = La, Yb, Y, Ce, Er, Ho, Nd, Eu) as dopants, the RE-doped Co3 O4 nanostructures can be well transformed from large nanosheets to coiled tiny nanosheets and finally to ultrafine nanoparticles, meanwhile, their specific surface area, pore distribution, the ratio of Co2+ /Co3+ , oxygen vacancy content, crystalline phase, microstrain parameter, and the capacitance performance are regularly affected. Notably, Eu-doped Co3 O4 nanoparticles with good cycle stability show a maximum specific capacitance of 1021.3 F g-1 (90.78 mAh g-1 ) at 2 A g-1 , higher than 388 F g-1 (34.49 mAh g-1 ) of pristine Co3 O4 nanosheets. The assembling asymmetric supercapacitor delivers a high energy density of 48.23 Wh kg-1 at high power density of 1.2 kW kg-1 . These findings denote the significance and great potential of RE-doped Co3 O4 in the development of high-efficiency energy storage.