RESUMEN
Novel aqueous biphasic systems (ABSs) developed with benzyl-based quaternary ammonium salts-deep eutectic solvents (DESs) and polypropylene glycol (PPG) were herein proposed. The liquid-liquid equilibrium and the partitioning behavior of pigments in the systems were addressed. The results suggested that the shorter the carbon chain length of the DES, the easier to form two phases. The analysis of mixed samples showed that the selective separation was achieved in the ABSs, including 99.47% of tartrazine in the DES-rich phase and 98.47% of sudan III in the PPG-rich phase. Additionally, the systems were successfully applied to the extraction of pigments from the actual beverage samples with recoveries ranging from 93.43% to 102.15%. Furthermore, the study on the separation mechanism indicated that the hydrogen bonding played a significant role in the separation process. All the above results highlight the proposed DES/polymer-based ABSs have great advantages in selective and high-performance separation of pigments from beverages.
Asunto(s)
Compuestos Azo , Bebidas , Disolventes Eutécticos Profundos , Polímeros , Bebidas/análisis , Polímeros/química , Disolventes Eutécticos Profundos/química , Glicoles de Propileno/química , Glicoles de Propileno/aislamiento & purificación , Colorantes/química , Colorantes/aislamiento & purificación , Solventes/química , Compuestos de Amonio Cuaternario/químicaRESUMEN
Indium antimonide nanowires (InSb NWs) are attractive building-block candidates for bottom-up construction of high-efficiency electronics and optoelectronics due to their narrow direct band gap, fast room temperature carrier mobilities and small exciton binding energy. However, InSb NWs synthesized by the vapor-liquid-solution (VLS) mechanism generally suffer from an increased carrier and phonon scattering rate, which is thought to be caused by randomly distributed crystal defects along the NW growth direction. In this study, by utilizing the recently developed low-temperature, solution-processed technique, these crystal defects were successfully suppressed by periodically distributed twin planes to form twinned InSb nanowires. Importantly, measurements of the electrical transport properties of field effect transistors (FETs) reveal that the InSb NWs exhibit a hole-dominated conductivity with room temperature mobilities of up to 50.71 cm2 V-1 s-1, which is distinctly contrary to the intrinsic n-type InSb NWs. This observation of n-p switching behavior is probably attributed to the surface band bending effect with regard to the Fermi energy level, which is caused by surface oxide trap states arising from the native-oxide layer at the surface of the InSb NWs. All these results illustrate that the as-prepared colloidal InSb NWs can potentially be used as p-type materials for integration with next-generation nanoscale electronics and optoelectronics via surface engineering.
RESUMEN
We present a self-seeded (with indium droplets) solution-liquid-solid (SLS) synthesis route for InSb nanowires (NWs) using commercially available precursors at a relatively low temperature of about 175 °C, which takes only 1 min upon the injection of reductant. Structural characterization reveals that the InSb nanowires are high quality and have twinning superlattice structures with periodically spaced twin planes along the growth direction of ã111ã. Notably, we have measured an ultrafast conductivity lifetime in the NWs of just 9.1 ps utilizing time-resolved optical pump-terahertz probe (OPTP) spectroscopy, which may facilitate the development of high-frequency nanoscale integrated optoelectronic systems related to twinning superlattice structures.
RESUMEN
Two kinds of hydrophobic deep eutectic solvents (DESs), including hexafluoroisopropanol (HFIP)-based DESs and polypropylene glycol 400 (PPG400)-based DESs, were synthesized to construct aqueous biphasic systems (ABSs) with choline chloride (ChCl)-based hydrophilic DESs for the first time, respectively. Three kinds of dyes with different hydrophobicity, including tartrazine, methylene blue and sudan â ¢, were chosen as the target analytes to evaluate the partitioning behaviors of the DES/DES ABSs. The effect of the types of hydrophilic DESs on dyes extraction were investigated and ChCl-glycol (ChCl-G) was selected as the phase-forming component. Then the partitioning of dyes in diverse DES/DES ABSs with different hydrophobicity was addressed by altering the carbon chain length of hydrogen bond accepter (HBA) in hydrophobic DES and changing the molar ratio of HBA: hydrogen bond donor (HBD) in hydrophilic DES. The results proved that in the ABSs of HFIP-based DES/DES, the sudan â ¢ tended to migrate to the hydrophobic DES-rich phase with the increased carbon chain length of hydrophobic DES and was inclined to transfer to the hydrophilic DES-rich phase with the increasing proportion of G in ChCl-G. Afterwards, the methylene blue was chosen to explore the influence factors of the extraction process. And the results showed that the adjusting of pH value could achieve a complete opposite distribution of methylene blue in PPG400-based DES/DES ABSs. Besides, extraction of dyes in real samples were evaluated and recoveries of 92.3%-106.1% were achieved. Moreover, the analysis of mixed samples demonstrated that 88.64% of tartrazine and 92.63% of methylene blue were enriched into the hydrophilic phase, while nearly all of the sudan â ¢ was moved into the hydrophobic phase. In addition, the phase-forming components could be reused according to the regeneration studies. Method validation proved the good precision, repeatability and stability of the established method. At last, the extraction mechanism was further investigated by dynamic light scattering (DLS) and transmission electron microscope (TEM). It turned out the formation of DES-dye aggregates might be responsible for the separation process. Above all, the results highlighted the possibility of the DES/DES ABSs as tunable systems for the partitioning of dyes with different hydrophobicity.
RESUMEN
A magnetized molecularly imprinted polymer (MIP) was prepared via a surface-imprinting technique. An allyl-based deep eutectic solvent was chosen as the functional monomer to obtain the polymer for specific recognition of lysozyme. It was deposited on silica-coated magnetite nanoparticles. The structure of the polymer was confirmed by X-ray diffraction, Fourier transform infrared spectrometry, transmission electron microscopy, thermogravimetric analysis and vibrating sample magnetometry. The maximum binding capacity of the imprinted polymer is found to be 108 mg·g-1, which is higher than that of non-imprinted polymer. Compared to reference proteins such as cytochrome C, bovine hemoglobin and bovine serum albumin, the MIP shows favorable selectivity for lysozyme. Besides, the imprinted polymer can be further used to specifically recognize lysozyme from the protein mixture and chicken egg white. Reusability studies demonstrate that the polymer can be recycled four times without significant loss of adsorption capacity. The LOD of the method is 12.8 µg·mL-1. The relative standard deviations (for n = 3) are 1.38% for precision and 2.76% for repeatability. Its facile synthesis, high adsorption performance and excellent selectivity to capture lysozyme make this polymer an attractive candidate to be applied in biomacromolecular purification. Graphical abstract Magnetic molecularly imprinted polymer (MIP) based on deep eutectic solvent as functional monomer was fabricated and applied for the specific recognition of lysozyme. The MIP exhibits high adsorption capacity and excellent selectivity for lysozyme.
Asunto(s)
Imanes/química , Impresión Molecular , Muramidasa/química , Polímeros/química , Polímeros/síntesis química , Solventes/química , Adsorción , Animales , Glicerol/química , Cinética , MicroesferasRESUMEN
A novel magnetic extractant, PEG 4000 modified Fe3O4nanomaterial that coated with dianionic amino acid ionic liquid (Fe3O4@PEG@DAAAIL), was successfully synthesized and characterized. X-ray diffraction (XRD), transmission electron microscope (TEM), vibrating sample magnetometer (VSM), fourier transform infrared spectrometry (FT-IR), thermal gravimetric analysis (TGA) and zeta potentials were used to confirm that the novel nanocomposite was successfully synthesized. Subsequently, the prepared Fe3O4@PEG@DAAAIL nanocomposite was used as the extractant for trypsin coupled with magnetic solid-phase extraction (MSPE). The concentrations of trypsin in the supernatant were detected by UV-vis spectrophotometer at 278nm. The extraction ability turned out to be better than the other four kinds of extractants prepared in this work. Furthermore, the influence of a series of factors, such as extraction time and temperature, initial trypsin concentration, the value of pH and ionic strength, was systematically investigated. Under the optimal extraction condition, the extraction capacity for trypsin could reach up to 718.73mg/g, absolutely higher than that of other adsorbents reported. This satisfactory extraction capacity could be maintained unchangeable after at least eight days, and kept over 90% of initial extraction capacity after eight recycles. What's more, the activity of trypsin after extraction retained 92.29% of initial activity, verifying the biocompatibility of the prepared extractant. Finally, the developed Fe3O4@PEG@DAAAIL-MSPE method was successfully applied to the real sample analysis with satisfactory results. All of above proves the potential value of Fe3O4@PEG@DAAAIL-MSPE in the analysis of biomass.
Asunto(s)
Aminoácidos/química , Líquidos Iónicos/química , Nanopartículas de Magnetita/química , Nanocompuestos/química , Polietilenglicoles/química , Extracción en Fase Sólida/métodos , Tripsina/aislamiento & purificación , Concentración de Iones de Hidrógeno , Concentración Osmolar , Temperatura , Factores de TiempoRESUMEN
In this work, 16 kinds of novel deep eutectic solvents (DESs) composed of polyethylene glycol (PEG) and quaternary ammonium salts, were coupled with Aqueous Biphasic Systems (ABSs) to extract RNA. The phase forming ability of ABSs were comprehensively evaluated, involving the effects of various proportions of DESs' components, carbon chain length and anions species of quaternary ammonium salts, average molecular weights of PEG and inorganic salts nature. Then the systems were applied in RNA extraction, and the results revealed that the extraction efficiency values were distinctly enhanced by relatively lower PEG content in DESs, smaller PEG molecular weights, longer carbon chain of quaternary ammonium salts and more hydrophobic inorganic salts. Then the systems composed of [TBAB][PEG600] and Na2SO4 were utilized in the influence factor experiments, proving that the electrostatic interaction was the dominant force for RNA extraction. Therefore, back-extraction efficiency values ranging between 85.19% and 90.78% were obtained by adjusting the ionic strength. Besides, the selective separation of RNA and tryptophane (Trp) was successfully accomplished. It was found that 86.19% RNA was distributed in the bottom phase, while 72.02% Trp was enriched in the top phase in the novel ABSs. Finally, dynamic light scattering (DLS) and transmission electron microscope (TEM) were used to further investigate the extraction mechanism. The proposed method reveals the outstanding feasibility of the newly developed ABSs formed by PEG-based DESs and inorganic salts for the green extraction of RNA.
Asunto(s)
Fraccionamiento Químico/métodos , Transición de Fase , Polietilenglicoles/química , Compuestos de Amonio Cuaternario/química , ARN/aislamiento & purificación , Agua/química , Tecnología Química Verde/métodos , Enlace de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Concentración Osmolar , Solventes/química , Electricidad EstáticaRESUMEN
Novel poly(deep eutectic solvent) grafted silica-coated magnetic microspheres (Fe3O4@SiO2-MPS@PDES) were prepared by polymerization of choline chloride-itaconic acid (ChCl-IA) and γ-MPS-modified magnetic silica composites, and were characterized by vibrating sample magnetometer (VSM), Fourier transform infrared spectrometry (FT-IR), X-ray photoelectron spectra (XPS), thermal gravimetric analysis (TGA) and transmission electron microscope (TEM). Then the synthetic Fe3O4@SiO2-MPS@PDES microspheres were applied for the magnetic solid-phase extraction (MSPE) of trypsin for the first time. After extraction, the concentration of trypsin in the supernatant was determined by a UV-vis spectrophotometer. Single factor experiments were carried out to investigate the effects of the extraction process, including the concentration of trypsin, the ionic strength, the pH value, the extraction time and the temperature. Experimental results showed the extraction capacity could reach up to 287.5 mg/g under optimized conditions. In comparison with Fe3O4@SiO2-MPS, Fe3O4@SiO2-MPS@PDES displayed higher extraction capacity and selectivity for trypsin. According to the regeneration studies, Fe3O4@SiO2-MPS@PDES microspheres can be recycled six times without significant loss of its extraction capacity, and retained a high extraction capacity of 233 mg/g after eight cycles. Besides, the activity studies also demonstrated that the activity of the extracted trypsin was well retained. Furthermore, the analysis of real sample revealed that the prepared magnetic microspheres can be used to purify trypsin in crude bovine pancreas extract. These results highlight the potential of the proposed Fe3O4@SiO2-MPS@PDES-MSPE method in separation of biomolecules.
Asunto(s)
Imanes/química , Dióxido de Silicio/química , Extracción en Fase Sólida/métodos , Solventes/química , Tripsina/aislamiento & purificación , Animales , Bovinos , Concentración Osmolar , Temperatura , Factores de Tiempo , Tripsina/química , Tripsina/metabolismoRESUMEN
A novel magnetic adsorbent, benzyl groups functionalized imidazolium-based polymeric ionic liquid (PIL)-coated magnetic multiwalled carbon nanotubes (MWCNTs) (m-MWCNTs@PIL), has been successfully synthesized and applied for the extraction of Cu, Zn-superoxide dismutase (Cu, Zn-SOD). The m-MWCNTs@PIL were characterized by X-ray diffraction (XRD), Fourier transform infrared spectrometry (FT-IR), thermal gravimetric analysis (TGA), field emission scanning electron microscopy (FESEM), vibrating sample magnetometer (VSM) and zeta-potential nanoparticles. In this method, the m-MWCNTs@PIL could interact with Cu, Zn-SOD through hydrogen bonding, π-π and electrostatic interactions. The extraction performance of the m-MWCNTs@PIL in the magnetic solid-phase extraction (MSPE) procedure was investigated, coupled with the determination by UV-vis spectrophotometer. Compared with m-MWCNTs@IL and m-MWCNTs, the m-MWCNTs@PIL exhibited the highest extraction capacity of 29.1 mg/g for Cu, Zn-SOD. The adsorbed Cu, Zn-SOD remained high specific activity after being eluted from m-MWCNTs@PIL by 1 moL/L NaCl solution. Besides, the m-MWCNTs@PIL could be easily recycled and successfully employed in the extraction of Cu, Zn-SOD from real samples. Under the optimal conditions, the precision, repeatability and stability of the proposed method were investigated and the RSDs were 0.29%, 1.68% and 0.54%, respectively. Recoveries were in the range of 82.7-102.3%, with the RSD between 3.47% and 5.35%. On the basis of these results, the developed method has great potential in the extraction of Cu, Zn-SOD or other analytes from biological samples.
Asunto(s)
Líquidos Iónicos/química , Imanes/química , Nanotubos de Carbono/química , Polímeros/química , Extracción en Fase Sólida/métodos , Superóxido Dismutasa/aislamiento & purificación , Adsorción , Animales , Concentración de Iones de Hidrógeno , Modelos Moleculares , Conformación Molecular , TemperaturaRESUMEN
Amino functional dicationic ionic liquid (AFDCIL) was prepared and then coated on the surface of magnetic graphene oxide (GO) as a new magnetic adsorbent (Fe@GO@AFDCIL) for the magnetic solid-phase extraction (MSPE) of protein. The Fe@GO@AFDCIL composite was characterized by vibrating sample magnetometer (VSM), X-ray diffraction (XRD), Fourier transform infrared spectrometry (FT-IR), thermal gravimetric analysis (TGA), field emission scanning electron microscopy (FESEM) and zeta-potential nanoparticles. The bovine hemoglobin (BHb) was used as the analyte, and the extraction performance of Fe@GO@AFDCIL was investigated in the MSPE procedure. The concentration of BHb in samples was determined by a UV-vis spectrophotometer. A comparative investigation of Fe@GO@AFDCIL composite and traditional IL-coated Fe@GO composites (Fe@GO@IL) exhibited the benefits of Fe@GO@AFDCIL. The adsorbed BHb could be eluted from the Fe@GO@AFDCIL by 4% sodium dodecyl sulfate (SDS) solution. The Fe@GO@AFDCIL exhibited favorable stability which could be reused at least 15 times. Under the optimized condition, the real samples were investigated, which demonstrated that the Fe@GO@AFDCIL was able to be applied in extracting bovine hemoglobin (BHb) from real biological samples.
Asunto(s)
Grafito/química , Hemoglobinas/análisis , Líquidos Iónicos/química , Hierro/química , Óxidos/química , Adsorción , Animales , Bovinos , Electroforesis en Gel de Poliacrilamida , Concentración de Iones de Hidrógeno , Fenómenos Magnéticos , Microscopía Electrónica de Rastreo , Concentración Osmolar , Extracción en Fase Sólida , Espectroscopía Infrarroja por Transformada de Fourier , Porcinos , Temperatura , Termogravimetría , Difracción de Rayos XRESUMEN
Six kinds of new type of green betaine-based deep eutectic solvents (DESs) have been synthesized. Deep eutectic solvent aqueous two-phase systems (DES-ATPS) were established and successfully applied in the extraction of protein. Betaine-urea (Be-U) was selected as the suitable extractant. Single factor experiments were carried out to determine the optimum conditions of the extraction process, such as the salt concentration, the mass of DES, the separation time, the amount of protein, the temperature and the pH value. The extraction efficiency could achieve to 99.82% under the optimum conditions. Mixed sample and practical sample analysis were discussed. The back extraction experiment was implemented and the back extraction efficiency could reach to 32.66%. The precision experiment, repeatability experiment and stability experiment were investigated. UV-vis, FT-IR and circular dichroism (CD) spectra confirmed that the conformation of protein was not changed during the process of extraction. The mechanisms of extraction were researched by dynamic light scattering (DLS), the measurement of the conductivity and transmission electron microscopy (TEM). DES-protein aggregates and embraces phenomenon play considerable roles in the separation process. All of these results indicated that betaine-based DES-ATPS may provide a potential substitute new method for the separation of proteins.
Asunto(s)
Betaína/química , Fraccionamiento Químico/métodos , Tecnología Química Verde/métodos , Proteínas/aislamiento & purificación , Solventes/química , Animales , Bovinos , Concentración de Iones de Hidrógeno , Fosfatos/química , Compuestos de Potasio/química , Temperatura , Factores de Tiempo , Agua/químicaRESUMEN
As a new type of green solvent, four kinds of choline chloride (ChCl)-based deep eutectic solvents (DESs) have been synthesized, and then a core-shell structure magnetic graphene oxide (Fe3O4-NH2@GO) nanoparticles have been prepared and coated with the ChCl-based DESs. Magnetic solid-phase extraction (MSPE) based Fe3O4-NH2@GO@DES was studied for the first time for the extraction of proteins. The characteristic results of vibrating sample magnetometer (VSM), X-ray diffraction (XRD), Fourier transform infrared spectrometry (FT-IR), thermal gravimetric analysis (TGA) and field emission scanning electron microscopy (FESEM) indicated the successful preparation of Fe3O4-NH2@GO@DES. The concentrations of proteins in studies were determined by a UV-vis spectrophotometer. The advantages of Fe3O4-NH2@GO@DES in protein extraction were compared with Fe3O4-NH2@GO and Fe3O4-NH2, and Fe3O4-NH2@GO@ChCl-glycerol was selected as the suitable extraction solvent. The influence factors of the extraction process such as the pH value, the temperature, the extraction time, the concentration of protein and the amount of Fe3O4-NH2@GO@ChCl-glycerol were evaluated. Desorption experimental result showed 98.73% of BSA could be eluted from the solid extractant with 0.1 mol/L Na2HPO4 solution contained 1 mol/L NaCl. Besides, the conformation of BSA was not changed during the elution by the investigation of circular dichromism (CD) spectra. Furthermore, the analysis of real sample demonstrated that the prepared magnetic nanoparticles did have extraction ability on proteins in bovine whole blood.
Asunto(s)
Grafito/química , Hemoglobinas/análisis , Nanopartículas de Magnetita/química , Extracción en Fase Sólida/métodos , Solventes/química , Animales , Bovinos , Difracción de Rayos X/métodosRESUMEN
Four kinds of green deep eutectic solvents (DESs) based on choline chloride (ChCl) have been synthesized and coated on the surface of magnetic graphene oxide (Fe3O4@GO) to form Fe3O4@GO-DES for the magnetic solid-phase extraction of protein. X-ray diffraction (XRD), vibrating sample magnetometer (VSM), Fourier transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FESEM) and thermal gravimetric analysis (TGA) were employed to characterize Fe3O4@GO-DES, and the results indicated the successful preparation of Fe3O4@GO-DES. The UV-vis spectrophotometer was used to measure the concentration of protein after extraction. Single factor experiments proved that the extraction amount was influenced by the types of DESs, solution temperature, solution ionic strength, extraction time, protein concentration and the amount of Fe3O4@GO-DES. Comparison of Fe3O4@GO and Fe3O4@GO-DES was carried out by extracting bovine serum albumin, ovalbumin, bovine hemoglobin and lysozyme. The experimental results showed that the proposed Fe3O4@GO-DES performs better than Fe3O4@GO in the extraction of acidic protein. Desorption of protein was carried out by eluting the solid extractant with 0.005 mol L(-1) Na2HPO4 contained 1 mol L(-1) NaCl. The obtained elution efficiency was about 90.9%. Attributed to the convenient magnetic separation, the solid extractant could be easily recycled.
Asunto(s)
Colina/química , Grafito/química , Óxidos/química , Albúmina Sérica Bovina/aislamiento & purificación , Extracción en Fase Sólida/métodos , Animales , Bovinos , Magnetismo/métodos , Difracción de Rayos XRESUMEN
A novel adsorbent based on silica-coated magnetic multiwall carbon nanotubes (MWCNTs) surface modified by dual hydroxy functional ionic liquid (FIL) ([OH]-FIL-m-MWCNTs@SiO2) has been designed and used for the purification of lysozyme (Lys) by magnetic solid-phase extraction (MSPE). Fourier transform infrared spectroscopy (FTIR), a vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were employed to characterize [OH]-FIL-m-MWCNTs@SiO2. After extraction, the concentration of Lys was determined by a UV-Vis spectrophotometer at 278 nm. A series of single-factor experiments were carried out to identify the optimal conditions of the extraction and the extraction amount could reach up to 94.6 mg g(-1). The RSD of the precision, the repeatability and the stability experiments were 0.37% (n = 3), 0.47% (n = 3) and 0.52% (n = 3), respectively. Comparison of [OH]-FIL-m-MWCNTs@SiO2 with silica-coated magnetic Fe3O4 (Fe3O4@SiO2), silica-coated magnetic multiwall carbon nanotubes (m-MWCNTs@SiO2) and alkyl quaternary ammonium ionic liquid-modified on m-MWCNTs@SiO2 was carried out by extracting Lys. The extraction of bovine serum albumin (BSA), trypsin (Try) and ovalbumin (OVA) was also done by the proposed method. Desorption of Lys was carried out by 0.005 mol L(-1) Na2HPO4-1 mol L(-1) NaCl as the eluent solution and the desorption ratio reached 91.6%. Nearly 97.8% of the [OH]-FIL-m-MWCNTs@SiO2 could be recovered from each run, and the extraction amount decreased less after five runs. The circular dichroism spectral experiment analysis indicated that the secondary structure of Lys was unchanged after extraction.
Asunto(s)
Líquidos Iónicos/química , Imanes/química , Nanotubos de Carbono/química , Proteínas/aislamiento & purificación , Extracción en Fase Sólida/métodos , Animales , Bovinos , Modelos Moleculares , Conformación Molecular , Concentración Osmolar , Estructura Secundaria de Proteína , Proteínas/química , Dióxido de Silicio/química , Propiedades de Superficie , Temperatura , Factores de TiempoRESUMEN
As a new type of green solvent, deep eutectic solvent (DES) has been applied for the extraction of proteins with an aqueous two-phase system (ATPS) in this work. Four kinds of choline chloride (ChCl)-based DESs were synthesized to extract bovine serum albumin (BSA), and ChCl-glycerol was selected as the suitable extraction solvent. Single factor experiments have been done to investigate the effects of the extraction process, including the amount of DES, the concentration of salt, the mass of protein, the shaking time, the temperature and PH value. Experimental results show 98.16% of the BSA could be extracted into the DES-rich phase in a single-step extraction under the optimized conditions. A high extraction efficiency of 94.36% was achieved, while the conditions were applied to the extraction of trypsin (Try). Precision, repeatability and stability experiments were studied and the relative standard deviations (RSD) of the extraction efficiency were 0.4246% (n=3), 1.6057% (n=3) and 1.6132% (n=3), respectively. Conformation of BSA was not changed during the extraction process according to the investigation of UV-vis spectra, FT-IR spectra and CD spectra of BSA. The conductivity, dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to explore the mechanism of the extraction. It turned out that the formation of DES-protein aggregates play a significant role in the separation process. All the results suggest that ChCl-based DES-ATPS are supposed to have the potential to provide new possibilities in the separation of proteins.
Asunto(s)
Colina/química , Glicerol/química , Albúmina Sérica Bovina/aislamiento & purificación , Animales , Bovinos , Colina/síntesis química , Glicerol/síntesis química , Concentración de Iones de Hidrógeno , Albúmina Sérica Bovina/química , Solventes/síntesis química , Solventes/química , Temperatura , Agua/químicaRESUMEN
A series of novel cationic functional hexaalkylguanidinium ionic liquids and anionic functional tetraalkylguanidinium ionic liquids have been synthesized, and then magnetic chitosan graphene oxide (MCGO) composite has been prepared and coated with these functional guanidinium ionic liquids to extract protein by magnetic solid-phase extraction. MCGO-functional guanidinium ionic liquid has been characterized by vibrating sample magnetometer, field emission scanning electron microscopy, X-ray diffraction spectrometer and Fourier transform infrared spectrometer. After extraction, the concentrations of protein were determined by measuring the absorbance at 278 nm using an ultra violet visible spectrophotometer. The advantages of MCGO-functional guanidinium ionic liquid in protein extraction were compared with magnetic chitosan, graphene oxide, MCGO and MCGO-ordinary imidazolium ionic liquid. The proposed method has been applied to extract trypsin, lysozyme, ovalbumin and bovine serum albumin. A comprehensive study of the adsorption conditions such as the concentration of protein, the amount of MCGO-functional guanidinium ionic liquid, the pH, the temperature and the extraction time were also presented. Moreover, the MCGO-functional guanidinium ionic liquid can be easily regenerated, and the extraction capacity was about 94% of the initial one after being used three times.
Asunto(s)
Quitosano/química , Grafito/química , Líquidos Iónicos/química , Magnetismo , Proteínas/aislamiento & purificación , Extracción en Fase Sólida/métodos , Microscopía Electrónica de Rastreo , Óxidos/química , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
A series of novel tetramethylguanidinium ionic liquids and hexaalkylguanidinium ionic liquids have been synthesized based on 1,1,3,3-tetramethylguanidine. The structures of the ionic liquids were confirmed by (1)H NMR spectroscopy and mass spectrometry. A green guanidinium ionic liquid based microwave-assisted extraction method has been developed with these guanidinium ionic liquids for the effective extraction of Praeruptorin A from Radix peucedani. After extraction, reversed-phase high-performance liquid chromatography with UV detection was employed for the analysis of Praeruptorin A. Several significant operating parameters were systematically optimized by single-factor and L9 (3(4)) orthogonal array experiments. The amount of Praeruptorin A extracted by [1,1,3,3-tetramethylguanidine]CH2CH(OH)COOH is the highest, reaching 11.05 ± 0.13 mg/g. Guanidinium ionic liquid based microwave-assisted extraction presents unique advantages in Praeruptorin A extraction compared with guanidinium ionic liquid based maceration extraction, guanidinium ionic liquid based heat reflux extraction and guanidinium ionic liquid based ultrasound-assisted extraction. The precision, stability, and repeatability of the process were investigated. The mechanisms of guanidinium ionic liquid based microwave-assisted extraction were researched by scanning electron microscopy and IR spectroscopy. All the results show that guanidinium ionic liquid based microwave-assisted extraction has a huge potential in the extraction of bioactive compounds from complex samples.
Asunto(s)
Apiaceae/química , Cumarinas/aislamiento & purificación , Medicamentos Herbarios Chinos/aislamiento & purificación , Raíces de Plantas/química , Cromatografía Líquida de Alta Presión , Cumarinas/análisis , Medicamentos Herbarios Chinos/análisis , Guanidina/química , Líquidos Iónicos/química , MicroondasRESUMEN
Four kinds of green deep eutectic solvent (DES) were synthesized, including choline chloride (ChCl)-urea, tetramethylammonium chloride (TMACl)-urea, tetrapropylammonium bromide (TPMBr)-urea and ChCl-methylurea. An aqueous two-phase system (ATPS) based ChCl-urea DES was studied for the first time for the extraction of bovine serum albumin (BSA). Single factor experiments proved that the extraction efficiency of BSA was influenced by the mass of the DES, concentration of K2HPO4 solution, separation time and extraction temperature. The optimum conditions were determined through an orthogonal experiment with the four factors described above. The results showed that under the optimum conditions, the average extraction efficiency could reach up to 99.94%, 99.72%, 100.05% and 100.05% (each measured three times). The relative standard deviations (RSD) of extraction efficiencies in precision, repeatability and stability experiments were 0.5533% (n = 5), 0.8306% (n = 5) and 0.9829% (n = 5), respectively. UV-vis and FT-IR spectra confirmed that there were no chemical interactions between BSA and the DES in the extraction process, and the CD spectra proved that the conformation of BSA did not change after extraction. The conductivity, DLS and TEM were combined to investigate the microstructure of the top phase and the possible mechanism for the extraction. The results showed that hydrophobic interactions, hydrogen bonding interactions and the salting-out effect played important roles in the transfer process, and the aggregation and surrounding phenomenon were the main driving forces for the separation. All of these results proved that ionic liquid (IL)-based ATPSs could potentially be substituted with DES-based ATPSs to offer new possibilities in the extraction of proteins.
Asunto(s)
Proteínas/aislamiento & purificación , Solventes/química , Enlace de Hidrógeno , Microscopía Electrónica de Transmisión , Reproducibilidad de los Resultados , Espectrofotometría UltravioletaRESUMEN
A series of novel cationic functional hexaalkylguanidinium ionic liquids and anionic functional tetraalkylguanidinium ionic liquids have been devised and synthesized based on 1,1,3,3-tetramethylguanidine. The structures of the ionic liquids (ILs) were confirmed by (1)H nuclear magnetic resonance ((1)H NMR) and 13C nuclear magnetic resonance (13C NMR) and the production yields were all above 90%. Functional guanidinium ionic liquid aqueous two-phase systems (FGIL-ATPSs) have been first designed with these functional guanidinium ILs and phosphate solution for the purification of protein. After phase separation, proteins had transferred into the IL-rich phase and the concentrations of proteins were determined by measuring the absorbance at 278 nm using an ultra violet visible (UV-vis) spectrophotometer. The advantages of FGIL-ATPSs were compared with ordinary ionic liquid aqueous two-phase systems (IL-ATPSs). The proposed FGIL-ATPS has been applied to purify lysozyme, trypsin, ovalbumin and bovine serum albumin. Single factor experiments were used to research the effects of the process, such as the amount of ionic liquid (IL), the concentration of salt solution, temperature and the amount of protein. The purification efficiency reaches to 97.05%. The secondary structure of protein during the experimental process was observed upon investigation using UV-vis spectrophotometer, Fourier-transform infrared spectroscopy (FT-IR) and circular dichroism spectrum (CD spectrum). The precision, stability and repeatability of the process were investigated. The mechanisms of purification were researched by dynamic light scattering (DLS), determination of the conductivity and transmission electron microscopy (TEM). It was suggested that aggregation and embrace phenomenon play a significant role in the purification of proteins. All the results show that FGIL-ATPSs have huge potential to offer new possibility in the purification of proteins.