Additive-assisted macroscopic self-assembly and control of the shape of assemblies based on host-guest interaction.

In these decades, considerable attention has focused on supramolecular polymers due to their unique structures and properties. More recently, macroscopic supramolecular polymers have attracted increasing interest from not only biologists but also materials scientists inspired by the sophisticated structures and functions of living organisms. Since the functions of supramolecular polymers are strongly dependent on their shape, control of the shape is an important issue in controlling the functions of supramolecular polymers. However, the control of shape in macroscopic supramolecular assemblies has not yet been sufficiently investigated. Previously, we studied the macroscopic self-assembly behavior of super absorbent polymer (SAP) microparticles modified with ß-cyclodextrin (ßCD) and adamantane (Ad) residues (ßCD(x)-SAP and Ad(y)-SAP microparticles, where x and y are the mol% contents of ßCD and Ad residues, respectively). More elongated assemblies were formed at higher y, indicating that the shape of assemblies can be controlled by varying the interaction strength. The noteworthy is that 1-adamantanamine hydrochloride (AdNH3Cl) assisted the formation of assemblies from ßCD(x)-SAP and Ad(y)-SAP microparticles, indicating that AdNH3Cl acts as a chemical stimulus for macroscopic assemblies of ßCD(x)-SAP and Ad(y)-SAP microparticles. In this study, we have thus studied the assembling behavior of ßCD(x)-SAP microparticles with Ad(y)-SAP microparticles and unmodified SAP microparticles assisted by AdNH3Cl, as well as the shape of the resulting macroscopic assemblies. AdNH3Cl assisted the formation of assemblies from ßCD(16.2)-SAP and Ad(15.1)-SAP microparticles, in which AdNH3Cl crosslinked the SAP microparticles through the formation of inclusion complexes of ßCD residues with the Ad residue and the electrostatic interaction of ammonium and carboxylate residues. Assemblies of ßCD(26.7)-SAP and unmodified SAP microparticles were formed at the concentrations of AdNH3Cl ([AdNH3Cl]0) higher than a certain level (ca. 0.05 mM). The aspect ratio (a/b) of assemblies showed a maximum at [AdNH3Cl]0 ~ 0.10 mM, indicating that the chemical stimulus, i.e., addition of AdNH3Cl, controls the shape of assemblies formed from ßCD(26.7)-SAP and unmodified SAP microparticles. This study suggests that other stimuli, e.g., heat, pH, light, redox, and force, can be utilized to control the shape of macroscopic assemblies based on supramolecular interactions.

Efficient Synthesis of Cyclic Poly(ethylene glycol)s under High Concentration Conditions by the Assistance of Pseudopolyrotaxane with Cyclodextrin Derivatives.

An efficient synthesis of cyclic polymers (CPs) is in high demand due to their unique properties. However, polymer cyclization generally occurs at low concentrations (0.1 g/L), and the synthesis of CPs at high concentrations remains a challenge. Herein an efficient cyclization of poly(ethylene glycol) (Mn = 2000 g/mol, 4000 g/mol) (PEG-2k, PEG-4k) in high concentration (80 g/L) is realized by the assistance of pseudopolyrotaxane (pPRx). Water-soluble pPRx with a U-like-shape inclusion motif is prepared by mixing the 2-hydroxypropyl-γ-cyclodextrin (HPγCD) and PEG with (E)-3,4,5-trimethoxycinnamate (TCA-PEG-2k, TCA-PEG-4k). Subsequent irradiation of the pPRx solution (10-80 g/L) by UV light gives cyclic polymers through the intramolecular [2 + 2] photocycloaddition of the cinnamoyl moieties. The photoreaction of TCA-PEG-2k in the pPRx system gives cyclic monomers (C-1mer) as major products with a yield of 66% at 80 g/L. Additionally, the cyclization of TCA-PEG-4k also gives C-1mer as major products with a yield of 45% at a concentration of 80 g/L.

Leaf-Inspired Host-Guest Complexation-Dictating Supramolecular Gas Sensors.

We report unique conductive leaf-inspired (in particular, stomata-inspired) supramolecular gas sensors in which acetylated cyclodextrin derivatives rule the electric output. The gas sensors consist of polymers bearing acetylated cyclodextrin, adamantane, and carbon black. Host-guest complexes between acetylated cyclodextrin and adamantane corresponding to the closed stomata realize a flexible polymeric matrix. Effective recombination of the cross-links contributes to the robustness. As gas sensors, the supramolecular materials detect ammonia as well as various other gases at 1 ppm in 10 min. The free acetylated cyclodextrin corresponding to open stomata recognized the guest gases to alter the electric resistivity. Interestingly, the conductive device failed to detect ammonia gases at all without acetylated cyclodextrin. The molecular recognition was studied by molecular dynamics simulations. The gas molecules existed stably in the cavity of free acetylated cyclodextrin. These findings show the potential for developing wearable gas sensors.

A genome-wide association and fine-mapping study of white rust resistance in hexaploid chrysanthemum cultivars with a wild diploid reference genome.

White rust caused by Puccinia horiana is one of the most serious diseases of chrysanthemum (Chrysanthemum × morifolium). In this study, we report the DNA markers associated with resistance against P. horiana via a simple approach using the genome of a wild diploid relative, Chrysanthemum seticuspe. First, we identified the important region of the genome in the resistant cultivar "Ariesu" via a genome-wide association study. Simplex single nucleotide polymorphism (SNP) markers mined from ddRAD-Seq were used in a biparental population originating from crosses between resistant "Ariesu" and susceptible "Yellow Queen". The C. seticuspe genome was used as a reference. For the fine mapping of P. horiana resistance locus 2 (Phr2), a comparative whole genome sequencing study was conducted. Although the genome sequences of chrysanthemum cultivars assembled via the short-read approach were fragmented, reliable genome alignments were reconstructed by mapping onto the chromosome level of the C. seticuspe pseudomolecule. Base variants were then identified by comparing the assembled genome sequences of resistant "Ariesu" and susceptible "Yellow Queen". Consequently, SNP markers that were closer to Phr2 compared with ddRAD-Seq markers were obtained. These SNP markers co-segregated with resistance in F1 progenies originating from resistant "Ariesu" and showed robust transferability for detecting Phr2-conferring resistance among chrysanthemum genetic resources. The wild C. seticuspe pseudomolecule, a de facto monoploid genome used for ddRAD-Seq analysis and assembled genome sequence comparison, demonstrated this method's utility as a model for developing DNA markers in hexaploid chrysanthemum cultivars.

Multi-energy dissipation mechanisms in supramolecular hydrogels with fast and slow relaxation modes.

Reversible cross-links by non-covalent bonds have been widely used to produce supramolecular hydrogels that are both tough and functional. While various supramolecular hydrogels with several kinds of reversible cross-links have been designed for many years, a universal design that would allow control of mechanical and functional properties remains unavailable. The physical properties of reversible cross-links are usually quantified by thermodynamics, dynamics, and bond energies. Herein, we investigated the relationship between the molecular mobility and mechanical toughness of supramolecular hydrogels consisting of two kinetically distinct reversible cross-links via host-guest interactions. The molecular mobility was quantified as the second-order average relaxation time (〈τ〉w) of the reversible cross-links. We discovered that hydrogels combining fast (〈τ〉w = 1.8 or 18 s) and slowly (〈τ〉w = 6.6 × 103 or 9.5 × 103 s) reversible cross-links showed increased toughness compared to hydrogels with only one type of cross-link because relaxation processes in the former occurred with wide timescales.

Synergetic improvement in the mechanical properties of polyurethanes with movable crosslinking and hydrogen bonds.

Polyurethane (PU) materials with movable crosslinking were prepared by a typical two-step synthetic process using an acetylated γ-cyclodextrin (TAcγCD) diol compound. The soft segment of PU is polytetrahydrofuran (PTHF), and the hard segment consists of hexamethylene diisocyanate (HDI) and 1,3-propylene glycol (POD). The synthesized PU materials exhibited the typical mechanical characteristics of a movable crosslinking network, and the presence of hydrogen bonds from the urethane bonds resulted in a synergistic effect. Two kinds of noncovalent bond crosslinking increased the Young's modulus of the material without affecting its toughness. Fourier transform infrared spectroscopy and X-ray scattering measurements were performed to analyze the effect of introducing movable crosslinking on the internal hydrogen bond and the microphase separation structure of PU, and the results showed that the carbonyl groups on TAcγCD could form hydrogen bonds with the PU chains and that the introduction of movable crosslinking weakened the hydrogen bonds between the hard segments of PU. When stretched, the movable crosslinking of the PU materials suppressed the orientation of polymer chains (shish-kebab orientation) in the tensile direction. The mechanical properties of the movable crosslinked PU materials show promise for future application in the industrial field.

Control of Photoinduced Electron Transfer Using Complex Formation of Water-Soluble Porphyrin and Polyvinylpyrrolidone.

Inspired by the natural photosynthetic system in which proteins control the electron transfer from electron donors to acceptors, in this research, artificial polymers were tried to achieve this control effect. Polyvinylpyrrolidone (PVP) was found to form complex with pigments 5,10,15,20-tetrakis-(4-sulfonatophenyl) porphyrin (TPPS) and its zinc complex (ZnTPPS) quantitatively through different interactions (hydrogen bonds and coordination bonds, respectively). These complex formations hinder the interaction between ground-state TPPS or ZnTPPS and an electron acceptor (methyl viologen, MV2+) and could control the photoinduced electron transfer from TPPS or ZnTPPS to MV2+, giving more electron transfer products methyl viologen cationic radical (MV+•). Other polymers such as PEG did not show similar results, indicating that PVP plays an important role in controlling the photoinduced electron transfer.

Development of an SSR marker-based genetic linkage map and identification of a QTL associated with flowering time in Eustoma.

Lisianthus (Eustoma grandiflorum) is an important floricultural crop cultivated worldwide. Despite its commercial importance, few DNA markers are available for molecular genetic research. In this study, we constructed a genetic linkage map and to detect quantitative trait loci (QTLs) for important agronomic traits of lisianthus. To develop simple sequence repeat (SSR) markers, we used 454-pyrosequencing technology to obtain genomic shotgun sequences and subsequently identified 8263 putative SSRs. A total of 3990 primer pairs were designed in silico and 1189 unique primer pairs were extracted through a BLAST search. Amplification was successful for more than 1000 primer pairs, and ultimately 278 SSR markers exhibited polymorphism between the two lisianthus accessions evaluated. Based on these markers, a genetic linkage map was constructed using a breeding population derived from crosses between the two accessions, for which flowering time differed (>140 days when grown under 20°C). We detected one QTL associated with flowering time (phenotypic variance, 27%; LOD value, 3.7). The SSR marker located at this QTL may account for variation in flowering time among accessions (i.e., three accessions whose nodes of the first flower were over 30 had late-flowering alleles of this QTL).

The macroscopic shape of assemblies formed from microparticles based on host-guest interaction dependent on the guest content.

Biological macroscopic assemblies have inspired researchers to utilize molecular recognition to develop smart materials in these decades. Recently, macroscopic self-assemblies based on molecular recognition have been realized using millimeter-scale hydrogel pieces possessing molecular recognition moieties. During the study on macroscopic self-assembly based on molecular recognition, we noticed that the shape of assemblies might be dependent on the host-guest pair. In this study, we were thus motivated to study the macroscopic shape of assemblies formed through host-guest interaction. We modified crosslinked poly(sodium acrylate) microparticles, i.e., superabsorbent polymer (SAP) microparticles, with ß-cyclodextrin (ßCD) and adamantyl (Ad) residues (ßCD(x)-SAP and Ad(y)-SAP microparticles, respectively, where x and y denote the mol% contents of ßCD and Ad residues). Then, we studied the self-assembly behavior of ßCD(x)-SAP and Ad(y)-SAP microparticles through the complexation of ßCD with Ad residues. There was a threshold of the ßCD content in ßCD(x)-SAP microparticles for assembly formation between x = 22.3 and 26.7. On the other hand, the shape of assemblies was dependent on the Ad content, y; More elongated assemblies were formed at a higher y. This may be because, at a higher y, small clusters formed in an early stage can stick together even upon collisions at a single contact point to form elongated aggregates, whereas, at a smaller y, small clusters stick together only upon collisions at multiple contact points to give rather circular assemblies. On the basis of these observations, the shape of assembly formed from microparticles can be controlled by varying y.

Effect of Nd: YAG laser irradiation to the temporomandibular joint on taste threshold.

BACKGROUND/PURPOSE: The tissue absorption laser has been clinically applied to alleviate pain in various areas. It is used for pain relief from temporomandibular disease (TMD) in dentistry. Although the facial and trigeminal nerves are distributed around the temporomandibular joint, the effects of laser irradiation and absorption on the neural functions have not been directly studied. In this study, the Nd:YAG laser was applied to an area where the facial nerve passes with photonic radiation for the treatment of TMD. MATERIALS AND METHODS: Ten volunteers including seven males and three females were selected as subjects. Nd:YAG laser was irradiated area included several internal and external standard and associated acupuncture points. The chorda tympani nerve, a branch of facial nerve is distributed to the front two thirds of the tongue and is associated with the sense of taste. We evaluated the effect of laser irradiation and absorption on the taste function by means of an electric taste meter. RESULTS: No significant difference was identified in the values between before and after laser irradiation (Wilcoxon signed-rank test). CONCLUSION: It was confirmed that there was no effect on taste function while applying Nd:YAG laser irradiation around the TMD joint.