A Platelet Intelligent Vehicle with Navigation for Cancer Photothermal-Chemotherapy.

Controllable and visible delivery of therapeutic agents is critical for tumor precise therapy. Tumor targeting and deep penetration of therapeutic agents are still challenging issues for controllable delivery. Visible drug delivery with imaging navigation can optimize the treatment window for personalized medicine. Herein, a biomimetic platelet intelligent vehicle with navigation (IRDNP-PLT) was developed to achieve controllable and visible delivery with a navigation system, a driving system, and a loading system. The platelets acted as engines and drug repositories to exert the target driving and delivery functions. The fluorescent photothermal agent IR-820 was introduced in the platform to offer an imaging navigation for the intelligent platelet vehicle in addition to photothermal therapy. The nanodrug-loaded platelets enabled efficient drug loading and controlled release of the therapeutic payload by encapsulating photothermal-/pH-sensitive chemotherapeutic nanoparticles (PDA@Dox NPs). In in vivo experiments on 4T1 tumor-bearing mice models, IRDNP-PLT performed well in tumor targeting and showed excellent therapeutic efficacy and tumor recurrence prevention ability. The intelligent platelet vehicle achieved the functions of tumor targeting and deep penetration, fluorescence imaging guidance, photocontrolled drug release, and chemo-photothermal combination therapy, suggesting the advancement for tumor precise delivery and efficient therapy.

Peptide dendrimers as potentiators of conventional chemotherapy in the treatment of pancreatic cancer in a mouse model.

Chemotherapy is the recommended treatment for patients with advanced pancreatic ductal adenocarcinoma (PDAC). However, efficacy of traditional chemotherapy is not satisfactory due to the presence of a dense dysplastic tumor stroma which prevents drug accumulation in and deep penetration into tumors. To overcome these obstacles, we designed and synthesized peptide dendrimers as potentiators of conventional chemotherapy. The dendrimers markedly promoted free doxorubicin accumulation and penetration deeply into 3D multicellular PDAC tumor cultures upon co-incubation. Co-administration of the dendrimer and doxorubicin into PDAC tumor xenograft-bearing mice greatly increased the doxorubicin concentration in the tumor. In addition, the dendrimer also promoted free doxorubicin internalization into PDAC cells upon co-incubation in media mimicking tumor microenvironment. Finally, a significant enhancement in the anticancer efficacy of doxorubicin and gemcitabine when either of the drugs was individually co-administered with the dendrimer into PDAC tumor xenograft-bearing mice was observed. This was especially pronounced for the combination treatment with the dendrimer and gemcitabine, resulting in a tumor weight decrease to 12.9% compared to the treatment with gemcitabine alone. This can be attributed to the combination of the multi-functionalities of the dendrimer, i.e., promoting free drug accumulation and penetration deeply into tumors and internalization into cancer cells.

Co-administration of a branched arginine-rich polymer enhances the anti-cancer efficacy of doxorubicin.

The severe side-effects and drug resistance development of conventional chemotherapy are mainly caused by poor tumor penetration as well as nonspecific biodistribution and insufficient cellular uptake of drugs. Herein a branched arginine-rich polymer was synthesized and co-administration of this polymer with doxorubicin, a model drug of chemotherapeutic agents, overcame simultaneously the three obstacles shown above. Co-incubation of the polymer promoted doxorubicin penetration deeply into multicellular tumor spheroids and internalization into cancer cells. Upon co-injection of the polymer with doxorubicin into tumor-bearing mice, the enhanced drug accumulation in and deep penetration into tumor tissue were observed compared to injection of doxorubicin alone. A combined therapy of doxorubicin and the polymer in the treatment of tumor-bearing mice showed a marked enhancement in anticancer efficacy compared to doxorubicin alone. Notably, the treatment with the combination regime reduced the doxorubicin dose to one fifth without reducing the antitumor efficacy compared to the treatment with doxorubicin alone. The possible mechanism of action of the polymer was postulated, in which the guanidinium groups of arginine residues in the polymer may play a pivotal role in the action.

One-Step Synthesis of Single-Stranded DNA-Bridged Iron Oxide Supraparticles as MRI Contrast Agents.

Despite progress on DNA-assembled nanoparticle (NP) superstructures, their complicated synthesis procedures hamper their potential biomedical applications. Here, we present an exceptionally simple strategy for the synthesis of single-stranded DNA (ssDNA) assembled Fe3O4 supraparticles (DFe-SPs) as magnetic resonance contrast agents. Unlike traditional approaches that assemble DNA-conjugated NPs via Watson-Crick hybridization, our DFe-SPs are formed with a high yield through one-step synthesis and assembly of ultrasmall Fe3O4 NPs via ssDNA-metal coordination bridges. We demonstrate that the DFe-SPs can efficiently accumulate into tumors for sensitive MR imaging. By virtue of reversible DNA-metal coordination bridges, the DFe-SPs could be disassembled into isolated small NPs in vivo, facilitating their elimination from the body. This work opens a new avenue for the ssDNA-mediated synthesis of superstructures, which expands the repertoire of DNA-directed NP assembly for biomedical applications.

Polyethylenimine modified with 2,3-dimethylmaleic anhydride potentiates the antitumor efficacy of conventional chemotherapy.

Conventional chemotherapy is a standard care for many cancers at present. However, their severe dose-dependent side effects are the major impediment for successful cancer therapy. Herein nanoparticles were used as a potentiator to enhance the uptake of free chemotherapeutic agents by cancer cells during chemotherapy. A pH-sensitive ß-carboxylate amide group-containing polymer, bPEI-DMA, was obtained by a one-step chemical reaction of commercially available branched polyethyleneimine with 2,3-dimethylmaleic anhydride. The obtained single-macromolecule nanoparticles with a size of 6.4 nm possessed zwitterions and a slight net negative charge at neutral pH, and thereby showed low cytotoxicity. Incubation of MCF-7 cells with bPEI-DMA at tumor acidic pHs led to leakage of lactate dehydrogenase from the cells. Sequential incubation of bPEI-DMA and doxorubicin with MCF-7 cells at tumor acidic pHs caused enhanced uptake of doxorubicin by the cells. These results can be attributed to the tumor pH-triggered positive charge generation on the nanoparticles due to the hydrolysis of the ß-carboxylate amide groups, and subsequently the positive charge caused an increase in cell membrane permeability. Sequential injection of bPEI-DMA and free doxorubicin or free cisplatin into nude mice bearing human tumors markedly inhibited the tumor growth, leading to a ~ 68% decrease in tumor volumes compared to injection of the free drugs alone. Sequential injection of bPEI-DMA and a half dose of free doxorubicin resulted in even greater tumor inhibition but less side effects than injection of a full dose of doxorubicin alone.

Polyion complexes of a cationic antimicrobial peptide as a potential systemically administered antibiotic.

Antimicrobial peptides (AMPs) are regarded as next-generation antibiotics to replace conventional antibiotics due to their rapid and broad-spectrum antimicrobial properties and far less sensitivity to the development of pathogen resistance. However, they are susceptible to proteolysis in vivo by endogenous or bacterial proteases as well as induce the lysis of red blood cells, which prevent their intravenous applications. In this work, polyion complex (PIC) micelles of the cationic AMP MSI-78 and the anionic copolymer methoxy poly(ethylene glycol)-b-poly(α-glutamic acid) (mPEG-b-PGlu) were prepared to develop novel antimicrobial agents for potential application in vivo. With an increase in molar ratio of mPEG-b-PGlu to MSI-78, the complexation ability of the PIC micelles increased. FITC-labeled MSI-78 showed a sustained release from the PIC micelles. More importantly, these PIC micelles greatly decreased the hemolytic toxicity of MSI-78 to human red blood cells, without influencing its antimicrobial activity. Thus, this approach could be used as a suitable in vivo delivery method of AMPs in the future.

Chlorambucil loaded in mesoporous polymeric microspheres as oral sustained release formulations with enhanced hydrolytic stability.

Chlorambucil, a chemotherapeutic agent, is usually administered orally to treat chronic lymphocytic leukemia and some other types of cancers in regimens of conventional and metronomic chemotherapies. However, the hydrolytic instability of chlorambucil is a major limitation in achieving the optimum therapeutic performance. In this work, mesoporous polymeric microspheres were prepared by free radical suspension copolymerization of methyl acrylate and divinylbenzene in the presence of porogen. Chlorambucil was loaded into the mesoporous polymeric microspheres through adsorption of the drug in aqueous media with high loading capacity up to more than 350 mg/g. Chlorambucil-loaded mesoporous polymeric microspheres showed sustained release property in media simulating gastrointestinal fluids, with nearly zero order release kinetics. Furthermore, the mesoporous polymeric microspheres as carriers greatly stabilized chlorambucil against its hydrolysis. The hydrolyzation percentage of chlorambucil that was adsorbed on the microspheres after incubation for 36 h in media simulating gastrointestinal fluids was less than 10%, while more than 90% of free chlorambucil hydrolyzed after incubation in the same media for 4 h. The chlorambucil-loaded mesoporous polymeric microspheres may be used as oral sustained release formulations, especially as oral formulations for the application in metronomic chemotherapy.

Co-administration of a charge-conversional dendrimer enhances antitumor efficacy of conventional chemotherapy.

Despite extensive investigations, the clinical translation of nanocarrier-based drug delivery systems (NDDS) for cancer therapy is hindered by inefficient delivery and poor tumor penetration. Conventional chemotherapy by administration of free small molecule anticancer drugs remains the standard of care for many cancers. Herein, other than for carrying and releasing drugs, small nanoparticles were used as a potentiator of conventional chemotherapy by co-administration with free chemotherapeutic agents. This strategy avoided the problems associated with drug loading and controlled release encountered in NDDS, and was also much simpler than NDDS. Negatively charged poly(amido amine)-2,3-dimethylmaleic monoamide (PAMAM-DMA) dendrimers were prepared, which possessed low toxicity and can be converted to positively charged PAMAM dendrimers responsive to tumor acidic pH. The in situ formed PAMAM in tumor tissue promoted cellular uptake of co-administered doxorubicin by increasing the cell membrane permeability, and subsequently enhanced the cytotoxicity of doxorubicin. The small size of the dendrimers was favorable for deep penetration in tumor. Co-injection of PAMAM-DMA with doxorubicin into nude mice bearing human tumors almost completely inhibited tumor growth, with a mean tumor weight reducing by 55.9% after the treatment compared with the treatment with doxorubicin alone.

Methotrexate-loaded porous polymeric adsorbents as oral sustained release formulations.

Methotrexate as a model drug with poor aqueous solubility was adsorbed into porous polymeric adsorbents, which was used as oral sustained release formulations. In vitro release assay in simulated gastrointestinal fluids showed that the methotrexate-loaded adsorbents showed distinct sustained release performance. The release rate increased with increase in pore size of the adsorbents. In vivo pharmacokinetic study showed that the maximal plasma methotrexate concentrations after oral administration of free methotrexate and methotrexate-loaded DA201-H (a commercial porous polymeric adsorbent) to rats occurred at 40min and 5h post-dose, respectively; and the plasma concentrations decreased to 22% after 5h for free methotrexate and 44% after 24h for methotrexate-loaded DA201-H, respectively. The load of methotrexate into the porous polymeric adsorbents not only resulted in obvious sustained release, but also enhanced the oral bioavailability of methotrexate. The areas under the curve, AUC0-24 and AUC0-inf, for methotrexate-loaded DA201-H increased 3.3 and 7.7 times, respectively, compared to those for free methotrexate.

A cross-linking strategy provides a new generation of biodegradable and biocompatible cyanoacrylate medical adhesives.

Addition polymerization usually results in polymers with long carbon-carbon main chains. Cyanoacrylate (CA) is arguably an important example of such polymerization and has gained widespread acceptance as an all-purpose adhesive. However, CA-based medical adhesives have never been approved by the U.S. Federal Drug Administration for use below the skin, mainly due to the low biodegradability and biocompatibility of their solid glue after polymerization. In this research, a cross-linking strategy involving the combination of alkyl-CA and the cross-linking agent poly(ethylene glycol)-di(cyanoacrylate) (CA-PEG-CA) to form a copolymeric network was used to synthesize a new generation of biodegradable CA medical adhesives. The degradability could be modulated by adjusting the ratio of CA-PEG-CA to alkyl-CA and the length of PEG. An optimal composite adhesive, LKJ11, was shown to have excellent biodegradability, adhesive capability, and biocompatibility. Importantly, the molecular weight of polycyanoacrylate chains in the polymerized LKJ11 was greatly reduced compared to those polymerized from pure butyl-CA. Thus, the degradation product could be readily extracted. The results showed that LKJ11 represents a new generation of CA-based biodegradable medical adhesives. This advance also provides a general strategy to facilitate the conversion of other polymers with long carbon-carbon main chains to a biodegradable form, thereby expanding the novel applications available for traditional polymeric materials.

Polymeric micelles with α-glutamyl-terminated PEG shells show low non-specific protein adsorption and a prolonged in vivo circulation time.

Although PEG remains the gold standard for stealth functionalization in drug delivery field up to date, complete inhibition of protein corona formation on PEG-coated nanoparticles remains a challenge. To improve the stealth property of PEG, herein an α-glutamyl group was conjugated to the end of PEG and polymeric micelles with α-glutamyl-terminated PEG shells were prepared. After incubation with bovine serum albumin or in fetal calf serum, the size of the micelles changed slightly, while the size of the micelles of similar diblock copolymer but without α-glutamyl group increased markedly. These results indicated that the micelles with α-glutamyl-terminated PEG shells showed low non-specific protein adsorption. In vivo blood clearance kinetics assay showed that the micelles with α-glutamyl-terminated PEG shells exhibited a longer in vivo blood circulation time compared with similar micelles but without α-glutamyl groups. The better stealth property of the micelles with α-glutamyl-terminated PEG shells was presumably attributed to the zwitterionic property of the α-glutamyl groups.

Peptide amphiphiles with multifunctional fragments promoting cellular uptake and endosomal escape as efficient gene vectors.

To overcome barriers associated with gene delivery, a series of peptides consisting of multifunctional fragments, including a cationic amphiphilic α-helical antimicrobial peptide (AMP), a cell penetrating peptide (CPP), TAT, a stearyl moiety, and cysteine residues, were designed and synthesized for evaluation as non-viral gene vectors. TAT and AMP segments were utilized to mediate cellular uptake and endosomal escape, respectively. Stearyl moieties provide an intramolecular hydrophobic environment to promote AMPs to form an α-helical conformation in PBS, and this is beneficial for DNA binding, cellular uptake, and endosomal escape. The α-helical content of the peptides, as well as the particle size, zeta potential, and morphology of the peptide/DNA complexes, was characterized. Fluorescence activated cell sorting (FACS) and confocal microscopy data showed that the peptides were able to efficiently translocate a pGL3 control plasmid across the plasma membrane via endocytosis, and then they successfully evaded endosomal entrapment and possible metabolic degradation. Moreover, one of the peptide vectors exhibited a high transfection efficiency similar to that of Lipofectamine 2000, concomitant with lower cytotoxicity. Overall, a combination of the four functional segments tested was used to generate a non-viral gene vector that synergistically promoted cellular uptake, endosomal escape, and gene expression.

Well-defined hydrophilic molecularly imprinted polymer microspheres for efficient molecular recognition in real biological samples by facile RAFT coupling chemistry.

A facile and highly efficient new approach (namely RAFT coupling chemistry) to obtain well-defined hydrophilic molecularly imprinted polymer (MIP) microspheres with excellent specific recognition ability toward small organic analytes in the real, undiluted biological samples is described. It involves the first synthesis of "living" MIP microspheres with surface-bound vinyl and dithioester groups via RAFT precipitation polymerization (RAFTPP) and their subsequent grafting of hydrophilic polymer brushes by the simple coupling reaction of hydrophilic macro-RAFT agents (i.e., hydrophilic polymers with a dithioester end group) with vinyl groups on the "living" MIP particles in the presence of a free radical initiator. The successful grafting of hydrophilic polymer brushes onto the obtained MIP particles was confirmed by SEM, FT-IR, static contact angle and water dispersion studies, elemental analyses, and template binding experiments. Well-defined MIP particles with densely grafted hydrophilic polymer brushes (∼1.8 chains/nm(2)) of desired chemical structures and molecular weights were readily obtained, which showed significantly improved surface hydrophilicity and could thus function properly in real biological media. The origin of the high grafting densities of the polymer brushes was clarified and the general applicability of the strategy was demonstrated. In particular, the well-defined characteristics of the resulting hydrophilic MIP particles allowed the first systematic study on the effects of various structural parameters of the grafted hydrophilic polymer brushes on their water-compatibility, which is of great importance for rationally designing more advanced real biological sample-compatible MIPs.

Efficient synthesis of narrowly dispersed hydrophilic and magnetic molecularly imprinted polymer microspheres with excellent molecular recognition ability in a real biological sample.

A facile and highly efficient approach to obtain narrowly dispersed hydrophilic and magnetic molecularly imprinted polymer microspheres with molecular recognition ability in a real biological sample as good as what they show in the organic solvent-based media is described for the first time.

Morpholino-decorated long circulating polymeric micelles with the function of surface charge transition triggered by pH changes.

Micelles with surface morpholino groups were stealthy at blood and normal tissue pH (7.4) due to the unprotonated hydrophilic morpholino groups on the surfaces. At tumor pH (<7), the micelle surfaces were positively charged because of the protonation of the morpholino groups, which promoted the cellular uptake of the micelles.

Enhanced cell uptake of superparamagnetic iron oxide nanoparticles through direct chemisorption of FITC-Tat-PEG600-b-poly(glycerol monoacrylate).

Magnetic nanoparticles (MNPs) functionalized with specific ligands are emerging as a highly integrated platform for cancer targeting, drug delivery, and magnetic resonance imaging applications. In this study, we describe a multifunctional magnetic nanoparticle system (FITC-Tat MNPs) consisting of a fluorescently labeled cell penetrating peptide (FITC-Tat peptide), a biocompatible block copolymer PEG(600)-b-poly(glycerol monoacrylate) (PEG(600)-b-PGA), and a superparamagnetic iron oxide (SPIO) nanoparticle core. The particles were prepared by direct chemisorption of PEG(600)-b-PGA conjugated with FITC-Tat peptide on the SPIO nanoparticles. FITC-MNPs without Tat were prepared for comparison. Flow cytometry assays revealed significantly higher uptake of FITC-Tat MNPs compared to FITC-MNPs in Caco-2 cells. These results were confirmed using confocal laser scanning microscopy (LSCM), which further demonstrated that the FITC-Tat MNPs accumulated in the cytoplasm and nucleus while the FITC-MNPs were localized in the cell membrane compartments. The FITC-Tat MNPs did not exhibit observable cytotoxicity in MTS assays.

Antimicrobial and hemolytic activities of copolymers with cationic and hydrophobic groups: a comparison of block and random copolymers.

Random and diblock copolymers of 2-(N,N-dimethylamino)ethyl methacrylate and butyl methacrylate are prepared by ATRP. As mimics of cationic antimicrobial peptides, the random and diblock copolymers show similar antimicrobial activities. In contrast, the diblock copolymers have much lower hemolytic activities than the random copolymers. The cell selectivity (HC(50)/MIC, where HC(50) is the concentration to lyse 50% of human red blood cells and MIC is the minimum concentration to inhibit bacterial growth) of the diblock copolymers are 150 to 27,500 times higher than that of random copolymers with similar compositions.

Multifunctional superparamagnetic nanocarriers with folate-mediated and pH-responsive targeting properties for anticancer drug delivery.

Multifunctional nanocarriers with multilayer core-shell architecture were prepared by coating superparamagnetic Fe(3)O(4) nanoparticle cores with a mixture of the triblock copolymer methoxy poly(ethylene glycol)-b-poly(methacrylic acid-co-n-butyl methacrylate)-b-poly(glycerol monomethacrylate) and the folate-conjugated block copolymer folate-poly(ethylene glycol)-b-poly(glycerol monomethacrylate). The model anticancer agent adriamycin (ADR), containing an amine group and a hydrophobic moiety, was loaded into the nanocarrier at pH 7.4 by ionic bonding and hydrophobic interactions. The release rate of the loaded drug molecules was slow at pH 7.4 (i.e. mimicking the blood environment) but increased significantly at acidic pH (i.e. mimicking endosome/lysosome conditions). Acid-triggered drug release resulted from the polycarboxylate protonation of poly(methacrylic acid), which broke the ionic bond between the carrier and ADR. Cellular uptake by folate receptor-overexpressing HeLa cells of the folate-conjugated ADR-loaded nanoparticles was higher than that of non-folated-conjugated nanoparticles. Thus, folate conjugation significantly increased nanoparticle cytotoxicity. These findings show the potential viability of a folate-targeting, pH-responsive nanocarrier for amine-containing anticancer drugs.

Multilayer nanoparticles with a magnetite core and a polycation inner shell as pH-responsive carriers for drug delivery.

Nanocarriers with multilayer core-shell architecture were prepared by coating a superparamagnetic Fe(3)O(4) core with a triblock copolymer. The first block of the copolymer formed the biocompatible outermost shell of the nanocarrier. The second block that contains amino groups and hydrophobic moiety formed the inner shell. The third block bound tightly onto the Fe(3)O(4) core. Chlorambucil (an anticancer agent) and indomethacin (an anti-inflammation agent), each containing a carboxyl group and a hydrophobic moiety, were loaded into the amino-group-containing inner shell by a combination of ionic and hydrophobic interactions. The release rate of the loaded drugs was slow at pH 7.4, mimicking the blood environment, whereas the release rate increased significantly at acidic pH, mimicking the intracellular conditions in the endosome/lysosome. This can be attributed to the disruption of the ionic bond caused by protonation of the carboxylate anion of the drugs and the swelling of the inner shell caused by protonation of the amino groups.

A peptide fragment derived from the T-cell antigen receptor protein alpha-chain adopts beta-sheet structure and shows potent antimicrobial activity.

A 9-residue peptide, CP-1 (GLRILLLKV-NH(2)), is synthesized by solid-phase synthesis method. CP-1 is a C-terminal amidated derivative of a hydrophobic transmembrane segment (CP) of the T-cell antigen receptor (TCR) alpha-chain. CP-1 shows broad-spectrum antimicrobial activities against Gram-positive and Gram-negative bacteria with the minimal inhibitory concentration (MIC) values between 3 and 77microM. Circular dichroism (CD) spectral data shows that CP-1 adopts a well-defined beta-sheet structure in membrane-mimicking environments. CP-1 kills E. coli without lysing the cell membrane or forming transmembrane pores. However, CP-1 can penetrate the bacterial cell membranes and accumulate in the cytoplasm in both Gram-positive S. aureus and Gram-negative E. coli. Moreover CP-1 shows binding affinity for plasmid DNA. These results indicate that the killing mechanism of CP-1 likely involves the penetration into the cytoplasm and binding to intracellular components such as DNA.