Epidemiology of community-acquired Mycoplasma Pneumoniae respiratory tract infections among hospitalized Chinese children, including relationships with meteorological factors.

BACKGROUND: Mycoplasma Pneumoniae (M. pneumoniae) is a common cause of respiratory tract infections (RTIs), especially in children. Combined diagnostic techniques have provided more reliable information about the epidemiology of infections by this pathogen. The relationship between M. pneumoniae RTIs and climatic conditions is not well documented in the literature. AIMS: To study the epidemiology of M. pneumoniae infections in hospitalized children with RTIs and its association with meteorological factors. METHODS: Samples were obtained from children with RTIs and tested for M. pneumoniae by PCR and ELISA. Meanwhile, meteorological factors were recorded. RESULTS: M. pneumoniae was identified in 11.02% of the 8,157 specimens. There were significant differences among the annual distribution of infections (χ(2) =130.13, P<0.0001) and among different seasons (χ(2) =93.59, P<0.0001). Of the total number of patients with M. pneumoniae infections, 14.5% were infected with more than one pathogen. M. pneumoniae infection strongly correlated with mean temperature. Children with a single M. pneumoniae infection had significantly higher neutrophil percentages and CRP levels than children with co-infections. CONCLUSIONS: M. pneumoniae is one of the most commonly held pathogens, according to the 5-year surveillance. M. pneumoniae infection has its own epidemic season, especially in the summer. Mean temperature is the main meteorological factor affecting the epidemiology of M. pneumoniae infections.

Fabrication and measurement of nanostructures on the micro ball surface using a modified atomic force microscope.

In order to machine and measure nanostructures on the micro ball surface, a modified atomic force microscope (AFM) combining a commercial AFM system with a home built precision air bearing spindle is established. Based on this system, motions of both the AFM scanner and the air bearing spindle are controlled to machine nanostructures on the micro ball based on the AFM tip-based nano mechanical machining approach. The eccentric error between the axis of the micro ball and the axis of the spindle is reduced to 3-4 µm by the provided fine adjusting method. A 1000 nano lines array, 36 square pits structure, 10 square pits structure, and a zig-zag structure on the circumference of the micro ball with the diameter of 1.5 mm are machined successfully. The measurement results achieved by the same system reveal that the profiles and mode-power spectra curves of the micro ball are influenced by the artificially machined nanostructures significantly according to their distributions. This work is an useful attempt for modifying the micro ball profile and manufacture of the spherical modulation targets to study the experimental performance of the micro ball in implosion.

Fabrication of large scale nanostructures based on a modified atomic force microscope nanomechanical machining system.

The atomic force microscope (AFM) tip-based nanomechanical machining has been demonstrated to be a powerful tool for fabricating complex 2D∕3D nanostructures. But the machining scale is very small, which holds back this technique severely. How to enlarge the machining scale is always a major concern for the researches. In the present study, a modified AFM tip-based nanomechanical machining system is established through combination of a high precision X-Y stage with the moving range of 100 mm × 100 mm and a commercial AFM in order to enlarge the machining scale. It is found that the tracing property of the AFM system is feasible for large scale machining by controlling the constant normal load. Effects of the machining parameters including the machining direction and the tip geometry on the uniform machined depth with a large scale are evaluated. Consequently, a new tip trace and an increasing load scheme are presented to achieve a uniform machined depth. Finally, a polymer nanoline array with the dimensions of 1 mm × 0.7 mm, the line density of 1000 lines/mm and the average machined depth of 150 nm, and a 20 × 20 polymer square holes array with the scale of 380 µm × 380 µm and the average machined depth of 250 nm are machined successfully. The uniform of the machined depths for all the nanostructures is acceptable. Therefore, it is verified that the AFM tip-based nanomechanical machining method can be used to machine millimeter scale nanostructures.

Association between renin-angiotensin system gene polymorphism and recurrent wheezing in Chinese children: a 4-year follow-up study.

This study aimed to clarify the association between angiotensin-converting enzyme (ACE) gene polymorphisms and infant wheezing, and to determine whether an association may contribute to early prediction of persistent wheezing and asthma. The study cohort comprised 149 patients with asthma, 169 patients with wheezing but no clinical diagnosis of asthma and 165 healthy control subjects. The insertion/deletion (I/D) polymorphism of the ACE gene was determined by polymerase chain reaction. Total serum immunoglobulin E was determined for the wheezy group and a 4-year follow-up study was carried out to observe wheezing relapse. Significant differences were found between patients and controls in allele frequency and genotype distribution. The DD genotype was more frequent in patients in the wheezing and asthma groups than in the control subjects. Patients with the DD genotype had a higher frequency of relapse than patients expressing the ID or II genotypes. It is concluded that the DD genotype of ACE is a risk factor for recurrent wheezing in early childhood.

On techniques for the measurement of the mass fractal dimension of aggregates.

A review is presented of a number of techniques available for the characterisation of the structure of aggregates formed from suspensions of sub-micron particles. Amongst the experimental techniques that have been commonly used are scattering (light, X-ray or neutron), settling and imaging and these are the focus of this work. The theoretical basis for the application of fractal geometry to characterisation of flocs and aggregates is followed by a discussion of the strengths and limitations of the above techniques. Of the scattering techniques available, light scattering provides the greatest potential for use as a tool for structure characterisation even though interpretation of the scattered intensity pattern is complicated by the strong interaction of light and matter. Restructuring further complicates the analysis. Although settling has long been used to characterise particle behaviour, the absence of an accurate permeability model limits the technique as a means of determining the porosity of fractal aggregates. However, it can be argued that the determination of fractal dimension is relatively unaffected. The strength of image analysis lies in its ability to provide a great deal of information about particle morphology and the weaknesses lie in the difficulties with image processing and sample size as this is a particle counting technique. There are very few papers which compare the fractal dimension measured by more than one technique. Light scattering potentially provides a useful tool for checking settling results. However, further work is required to develop proper models for aggregate permeability and flow-through effects.

Viscosity effect on the structural compactness of latex flocs formed under weak depletion attractions.

Dilute aqueous dispersions of colloidal polystyrene latex spheres were flocculated by adding a nonadsorbing polymer sample, poly(acrylic acid). The structural compactness of the flocs thus formed was characterized in terms of their mass fractal dimension using the small-angle static light scattering technique. It was found that with low poly(acrylic acid) concentrations and thus weak depletion attraction forces, the dispersion medium viscosity had a marked effect on the floc structure. An increase in the viscosity led to formation of denser flocs. This was revealed in three sets of depletion flocculation experiments: (a) adjusting the background electrolyte concentration at a fixed level of poly(acrylic acid), (b) using water and 30% (w/w) glycerol as the respective solvents, and (c) inducing latex flocculation with two poly(acrylic acids) of different molecular weights at the respective critical polyacid concentrations. Direct force measurements were made with atomic force microscopy to isolate the influence of viscosity on floc structure from that of interparticle interaction energies. We conclude that the formation of denser flocs with increasing medium viscosity can be attributed to the reduced diffusivity of particles in the solution. The latter resulted in an enhanced rate of floc restructuring (through relaxation of attached particles) relative to floc growth.

Inhibition of HIV infection by baicalin--a flavonoid compound purified from Chinese herbal medicine.

Baicalin (BA), (formulated as 7-D-glucuronic acid-5,6-dihydroxy-flavone), was purified from the plant Scutellaria Baicalensis Georgi. It has been used as a traditional Chinese herbal medicine. The inhibitory effect of BA against human immunodeficiency virus (HIV-1) infection and replication has been studied in vitro. The compound inhibits HIV-1 infection and replication as measured by: (1) a quantitative focal syncytium formation on CEM-ss monolayer cells; and (2) HIV-1 specific core antigen p24 expression and retroviral reverse transcriptase (RT) activity in the HIV-1-infected H9 cells. We have further demonstrated that the enzymatic activity of purified recombinant HIV-1/RT was inhibited by BA. In addition to lymphoid cell lines, the anti-HIV-1 activity of BA was also observed in cultures of primary human peripheral blood mononuclear cells infected with HIV-1 in vitro. Neither cytotoxic nor cytostatic effects on the indicator cells were found under the assay condition. This data suggests that BA may serve as a useful drug for the treatment and prevention of HIV infections.

Inhibition of human T cell leukemia virus by the plant flavonoid baicalin (7-glucuronic acid, 5,6-dihydroxyflavone).

The ability of baicalin (7-glucuronic acid, 5,6-dihydroxyflavone), a flavonoid compound purified from the Chinese medicinal herb, Scutellaria baicalensis georgi, to inhibit human T cell leukemia virus type I (HTLV-I) was examined. Baicalin produced concentration-dependent inhibition of HTLV-I replication in productively infected T and B cells. Moreover, baicalin treatment selectively reduced the detectable levels of HTLV-I p19 gag protein in infected cells by greater than 70% at concentrations that produced insignificant effects on total cellular protein and DNA synthesis with no loss in cell viability. Resistance to HTLV-I infection and virus-mediated transformation was noted in uninfected peripheral blood lymphocytes pretreated with baicalin before cocultivation with lethally irradiated chronically infected cells. Baicalin inhibited reverse transcriptase activity in HTLV-I-infected cells as well as the activity of purified reverse transcriptase from Moloney murine leukemia virus and Rous-associated virus type 2. These results suggest that baicalin may be a potential therapeutic agent against HTLV-I-associated T cell diseases.