RESUMEN
Sn-3Ag-0.5Cu (SAC305)- and Sn-9Zn-based alloys (Sn-Zn-X, X = Al, In) are lead-free solders used in the fabrication of solder joints with Cu metallization. Electroplating is a facile technology used to fabricate Cu metallization. However, the addition of functional additive molecules in the plating solution may result in impurity residues in the Cu electroplated layer, causing damage to the solder joints. This study investigates the impurity effect on solder joints constructed by joining various solder alloys to the Cu electroplated layers. Functional additives are formulated to fabricate high-impurity and low-impurity Cu electroplated samples. The as-joined solder joint samples are thermally aged at 120 °C and 170 °C to explore the interfacial reactions between solder alloys and Cu. The results show that the impurity effect on the interfacial reactions between SAC305 and Cu is significant. Voids are massively formed at the SAC305/Cu interface incorporated with a high impurity content, and the Cu6Sn5 intermetallic compound (IMC) grows at a faster rate. In contrast, the growth of the Cu5Zn8 IMC formed in the SnZn-based solder joints is not significantly influenced by the impurity content in the Cu electroplated layers. Voids are not observed in the SnZn-based solder joints regardless of the impurity content, indicative of an insignificant impurity effect. The discrepancy of the impurity effect is rationalized by the differences in the IMC formation and associated atomic interdiffusion in the SAC305- and SnZn-based solder joints.
RESUMEN
The phase equilibria of the Ag-Al-Au ternary system and the solid-state reaction couple for the Au-xAg/Al system were investigated isothermally at 450 °C. By investigating the Ag-Al-Au ternary system and its isothermal section, this study aims to provide a clearer understanding of the phase stability and interfacial reactions between different phases. This information is crucial for designing materials and processes in electronic packaging, with the potential to reduce costs and improve reliability. There were seven single-phase regions, thirteen two-phase regions, and six three-phase regions, with no ternary intermetallic compound (IMC) formed in the isothermal section of the Ag-Al-Au ternary system. When the Au-25 wt.% Ag/Al couple was aged at 450 °C for 240-1500 h, the AuAl2, Au2Al, and Au4Al phases formed at the interface. When the Ag contents increased to 50 and 75 wt.%, the Ag2Al, AuAl2, and Au4Al phases formed at the interface. When the aging time increased from 240 h to 1500 h, the total IMC thickness in all Au-xAg/Al couples became thicker, but the types of IMCs formed at the interface did not change. The total IMC thickness also increased with the increase in the Ag content. When the Ag content was greater than 25 wt.%, the Au2Al phase was converted into the Ag2Al phase. The IMC growth mechanism in all of the couples followed a reaction-controlled process.
RESUMEN
In recent years, high-entropy alloys (HEAs) that contain fine grains of intermetallic compounds (IMCs) have gained increasing attention as they have been shown to exhibit both high mechanical strength and strong corrosion resistance. One such class of HEAs is that of CuFeTiZrNi alloys. In this study, we have investigated the effect of increasing Ni content on the microstructure, hardness, and corrosion resistance of the CuFeTiZrNix alloys (where x = 0.1, 0.3, 0.5, 0.8, 1.0 in a molar ratio). The alloys used in this study were prepared in an arc melting furnace and then annealed at 900 °C. First-principles calculations of the bulk modulus were also performed for each alloy. The results revealed that increasing the Ni content had several effects. Firstly, the microstructure of the CuFeTiZrNix alloys changed from B2_BCC and Laves_C14 in the CuFeTiZrNi0.1 and CuFeTiZrNi0.3 alloys to FCC, B2_BCC, and Laves_C14 in the CuFeTiZrNi0.5 alloys; and to FCC, B2_BCC, Cu51Zr14, and Laves_C14 in the CuFeTiZrNi0.8 and CuFeTiZrNi1.0 alloys. Secondly, IMCs arising from a combination of the refractory elements (Ti and Zr) and atomic size differences were found in the interdendritic region. Thirdly, as the Ni content in the CuFeTiZrNix alloys increased, the hardness decreased, but the corrosion resistance increased.
RESUMEN
Despite various studies on the preparation of different types and sizes of ZnO, the synthesis of quantum clusters of bare metal oxide has rarely been reported. The research goals of this study were to create clusters/nanoparticles using femtosecond laser irradiation to increase the electrical, optical, and chemical functionalities of ZnO. Femtosecond pulse laser irradiation deposition technology was used here to produce ZnO from a precursor in water (pH = 5.5) and aqueous alkaline solution (pH = 10.2). These products were named ZnO(F5.5) and ZnO(F10.2), respectively. In this procedure, Zn ions react with hydroxyl radicals (OH*) produced by the decomposition of water molecules, and Zn(OH*)2 is dehydrated by femtosecond laser energy to create ZnO. The spherical particle size of ZnO(F5.5) after 1-30 min irradiation was found to be small (1-7 nm) compared to that of ZnO(F10.2) spheres (10-13 nm). Furthermore, ZnO(F5.5) shows a larger band gap (5.3-5.6 eV), a longer electron life time (40.4 ms), and a higher emission intensity (483 a.u.) compared to ZnO(F10.2). For the photodegradation of harmful pollutants, ZnO(F5.5) prepared at 1 min of laser irradiation reduces formaldehyde by 98.5% under UV light irradiation for 15 min. However, ZnO(F10.2) and other larger ZnO particles with various shapes require a longer time for formaldehyde conversion. These results confirm that an ultrasmall ZnO nanoparticle (1 nm in size) can be called a quantum cluster and has better electrical, optical, and photocatalyst characteristics. In particular, efficient photocatalytic reactions may be used to study the ecological and environmental impacts of ZnO quantum cluster.