RESUMEN
In this work, two novel tetra-substituted X-shaped molecules X1 and X2 that were constructed with anthracene as the central core and arylamine as the donor groups have been synthesized. The HTMs X1 and X2 were synthesized in two steps from industrially accessible and moderately reasonable beginning reagents. These new HTMs are described in terms of utilization of light absorption, energy level, thermal properties, hole mobility (µh), and film-forming property. The photovoltaic performances of these HTMs were effectively assessed in perovskite solar cells (PSCs). The devices based on these HTMs accomplished an overall efficiency of 16.10% for X1 and 10.25% for X2 under standard conditions (AM 1.5 G and 100 mW cm-2). This precise investigation provides another perspective on the use of HTMs in PSCs with various device configurations.
RESUMEN
In this paper, two D-π-D type compounds, C1 and C2, containing dihydrodinaphthopentacene (DHDNP) as a π-bridge, p-methoxydiphenylamine and p-methoxytriphenylamine groups as the donor groups were synthesized. The four 4-hexylphenyl groups at the sp3 -carbon bridges of DHDNP were acquainted with control morphology and improving solubility. The light absorption, energy level, thermal properties, and application as hole-transporting materials in perovskite solar cells of these compounds were fully investigated. The HOMO/LUMO levels and energy gaps of these DHDNP-based molecules are suitable for use as hole-transporting materials in PSCs. The best power conversion efficiencies of the PVSCs based on the C1 and C2 are 15.96% and 12.86%, respectively. The performance of C1 is comparable to that of the reference compound spiro-OMeTAD (16.38%). Compared with spiro-OMeTAD, the C1-based PVSC device showed good stability, which was slightly decreased to 98.68% of its initial efficiency after 48â h and retained 81% of its original PCE after 334â h without encapsulation. These results reveal the potential usefulness of the DHDNP building block for further development of economical and highly efficient HTMs for PVSCs.
RESUMEN
Atomic-force microscopic images, x-ray diffraction patterns, Urbach energies and photoluminescence quenching experiments show that the interfacial contact quality between the hydrophobic [6,6]-phenyl-C61-buttric acid methyl ester (PCBM) thin film and hydrophilic CH3NH3PbI3(MAPbI3) thin film can be effectively improved by using a binary antisolvent mixture (toluene:dichloromethane or chlorobenzene:dichloromethane) in the anti-solvent mixture-mediated nucleation process, which increases the averaged power conversion efficiency of the resultant PEDOT:PSS (P3CT-Na) thin film based MAPbI3solar cells from 13.18% (18.52%) to 13.80% (19.55%). Beside, the use of 10% dichloromethane (DCM) in the binary antisolvent mixture results in a nano-textured MAPbI3thin film with multicrystalline micrometer-sized grains and thereby increasing the short-circuit current density and fill factor (FF) of the resultant solar cells. It is noted that a remarkable FF of 80.33% is achieved, which can be used to explain the stable photovoltaic performance without additional encapsulations.
RESUMEN
A series of novel double-anchoring dyes for phenoxazine-based organic dyes with two 2-cyanoacetic acid acceptors/anchors, and the inclusion of a 2-ethylhexyl chain at the nitrogen atom of the phenoxazine that is connected with furan, thiophene, and 3-hexylthiophene as a linker, are used as sensitizers for dye-sensitized solar cells. The double-anchoring dye exhibits strong electronic coupling with TiO2, provided that there is an efficient charge injection rate. The result showed that the power conversion efficiency of DP-2 with thiophene linker-based cell reached 3.80% higher than that of DP-1 with furan linker (η = 1.53%) under standard illumination. The photovoltaic properties are further tuned by co-adsorption strategy, which improved power conversion efficiencies slightly. Further molecular theoretical computation and electrochemical impedance spectroscopy analysis of the dyes provide further insight into the molecular geometry and the impact of the different π-conjugated spacers on the photophysical and photovoltaic performance.
RESUMEN
A high-efficiency inverted-type CH3NH3PbI3 (MAPbI3) solar cell was fabricated by using a ultrathin poly[3-(4-carboxybutyl)thiophene-2,5-diyl]-Na (P3CT-Na) film as the hole transport layer. The averaged power conversion efficiency (PCE) can be largely increased from 11.72 to 18.92% with a double-filtering process of the P3CT-Na solution mainly due to the increase in short-circuit current density (JSC) from 19.43 to 23.88 mA/cm2, which means that the molecular packing structure of P3CT-Na thin film can influence the formation of the MAPbI3 thin film and the contact quality at the MAPbI3/P3CT-Na interface. Zeta potentials, atomic-force microscopic images, absorbance spectra, photoluminescence spectra, X-ray diffraction patterns, and Raman scattering spectra are used to understand the improvement in the JSC. Besides, the light intensity-dependent and wavelength-dependent photovoltaic performance of the MAPbI3 solar cells shows that the P3CT-Na thin film is not only used as the hole transport layer but also plays an important role during the formation of a high-quality MAPbI3 thin film. It is noted that the PCE values of the best P3CT-Na based MAPbI3 solar cell are higher than 30% in the yellow-to-near infrared wavelength range under low light intensities. On the other hand, it is predicted that the double-filtering method can be readily used to increase the PCE of polymer based solar cells.
RESUMEN
Dipolar dyes comprising an arylamine as the electron donor, a cyanoacrylic acid as electron acceptor, and an electron deficient naphtho[2,3-c][1,2,5]thiadiazole (NTD) or naphtho[2,3-d][1,2,3]triazole (NTz) entity in the conjugated spacer, were developed and used as the sensitizers in dye-sensitized solar cells (DSSCs). The introduction of the NTD unit into the molecular frame distinctly narrows the HOMO/LUMO gap with electronic absorption extending to >650 nm. However, significant charge trapping and dye aggregation were found in these dyes. Under standard global AM 1.5 G illumination, the best cell photovoltaic performance achieved 6.37 and 7.53% (â¼94% relative to N719-based standard cell) without and with chenodeoxycholic acid (CDCA) coadsorbent, respectively. Without CDCA, the NTz dyes have higher power conversion efficiency (7.23%) than NTD dyes due to less charge trapping, dye aggregation, and better dark current suppression.
RESUMEN
A series of new phenothiazine-based dyes (HL5-HL7) with double acceptors/anchors have been synthesized and used as the sensitizers for highly efficient dye-sensitized solar cells (DSSCs). Among them, the HL7-based cell exhibits the best efficiency of 8.32% exceeding the N719-based cell (7.35%) by â¼13%.
RESUMEN
A series of metal-free benzotriazole-based dipolar dyes have been developed as sensitizers for dye-sensitized solar cells (DSSCs). Different heteroaromatic rings such as furan, thiophene, and selenophene, were used in combination with benzotriazole as the conjugated spacer group. Light harvesting, charge recombination, and electron injection of the cells fabricated are affected by the heteroaromatic ring used in the spacer. The DSSC with the thiophene-containing dye has the highest conversion efficiency of 6.20%, which reaches 85% of the standard cell based on N719.
RESUMEN
Metal-free dyes (BP-1 to BP-3) containing a 9,10-dihydrophenanthrene unit in the spacer have been synthesized. The dye with the highest cell efficiency, BP-2, was used in combination with SQ2 for cosensitized DSSCs. The cosensitized DSSC in which the ratio of BP-2 and SQ2 is 8:2 (v/v) has a record high efficiency of 8.14% among cosensitized systems using all metal-free sensitizers. Dye distribution along the TiO2 film depth was analyzed by an Auger electron spectroscopy technique.
RESUMEN
New arylamine-based sensitizers for p-type dye-sensitized solar cells (DSSCs) have been synthesized and used for p-type DSSCs. The best conversion efficiency reaches â¼0.1%. Sensitizers with two anchoring carboxylic acids lead to higher open-circuit voltages, short-circuit currents, and energy conversion efficiencies.
RESUMEN
New heteroleptic ruthenium complexes have been synthesized and used as the sensitizers for dye-sensitized solar cells (DSSCs). The ancillary bipyridine ligand contains rigid aromatic segments (fluorene-, carbazole-, or dithieno[3,2-b:2',3'-d]pyrrole-substituted bipyridine) tethered with a hydrophobic hexyl substituent. The conjugated aromatic segment results in significant bathochromic shift and hyperchromic effects in these complexes compared with Z907 (cis-[RuLL'(NCS)(2)]; L=4,4'-dicarboxylic acid-2,2'-bipyridine, L'=4,4'-dinonyl-2,2'- bipyridine). The long hydrocarbon chains help to suppress the dark current if appropriately disposed. DSSCs that use these complexes exhibit very impressive conversion efficiencies (5.94 to 6.91 %) that surpass that of Z907-based (6.36 %) DSSCs and are comparable with that of N719-based standard cells (7.13 %; N719=cis-di(thiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato)ruthenium(II) bis(tetrabutylammonium)) fabricated and measured under similar conditions (active area: 0.5×0.5â cm(2); AMâ 1.5 sunlight).
RESUMEN
Efficient structural characterization is important for quality control when developing novel materials. In this study, we demonstrated the soft ionization capability of the hybrid of immobilized silica and 2,5-dihydrobenzoic acid (DHB) on iron oxide magnetic nanoparticles in MALDI-TOF MS with a clean background. The ratio between SiO(2) and DHB was examined and was found to affect the surface immobilization of DHB on the nanoparticle, critically controlling the ionization efficiency and interference background. Compared with commercial DHB, the functionalized nanoparticle-assisted MALDI-TOF MS provided superior soft ionization with production of strong molecular ions within 5 ppm mass accuracy on a variety of new types of synthetic materials used for solar cells, light emitting devices, dendrimers, and glycolipids, including analytes with either thermally labile structures or poor protonation tendencies. In addition, the enhancements of the molecular ion signal also provided high-quality product-ion spectra allowing structural characterization and unambiguous small molecule identification. Using this technique, the structural differences among the isomers were distinguished through their characteristic fragment ions and comprehensive fragmentation patterns. With the advantages of long-term stability and simple sample preparation by deposition on a regular sample plate, the use of DHB-functionalized nanoparticles combined with high-resolution MALDI-TOF MS provides a generic platform for rapid and unambiguous structure determination of small molecules.
Asunto(s)
Benzoatos/química , Nanopartículas de Magnetita/química , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodos , Ionización del Aire , Bases de Datos Factuales , Glucolípidos/química , Compuestos Inorgánicos/química , Iones/química , Compuestos Orgánicos/química , Dióxido de Silicio/química , Espectrometría de Masas en TándemRESUMEN
New dipolar compounds incorporating a dithieno[3,2-b:2',3'-d]thiophene unit as the electron donor, an oligothiophene moiety as the conjugated spacer, and 2-cyanoacrylic acid as the electron acceptor have been synthesized. These nonarylamine type metal-free organic compounds have been successfully used as the sensitizers of dye-sensitized solar cells (DSSCs). The conversion efficiencies of the DSSCs range from 3.54 to 5.15% under AM 1.5 G irradiation. The best efficiency reached approximately 70% of the ruthenium dye N719-based standard cell fabricated and measured under similar conditions.
RESUMEN
New metal-free dyes with a furan moiety in the conjugated spacer between the arylamine donor and the 2-cyanoacrylic acid acceptor have been synthesized, and high efficiency dye-sensitized solar cells were fabricated using these molecules as light-harvesting sensitizers.
Asunto(s)
Aminas/química , Cianoacrilatos/química , Colorantes Fluorescentes/química , Furanos/química , Energía Solar , Aminas/síntesis química , Aminas/efectos de la radiación , Cianoacrilatos/síntesis química , Cianoacrilatos/efectos de la radiación , Colorantes Fluorescentes/síntesis química , Colorantes Fluorescentes/efectos de la radiación , Furanos/efectos de la radiación , Luz , Modelos Químicos , Estructura Molecular , Sensibilidad y Especificidad , EstereoisomerismoRESUMEN
The cationic complex {[Ru]=C=CHCPh2CH2CH=CH2}BF4 (3a, [Ru] = (eta5-C5H5)(PPh3)2Ru) in solution transforms to {[Ru]=C=CHCH2CPh2CH=CH2}BF4 (4a) via a new metathesis process of the terminal vinyl group with the C=C of the vinylidene group which is confirmed by 13C labeling studies. This transformation is irreversible as revealed by deuteration and decomplexation studies. The cationic complex {[Ru]=C=CHCPh2CH2CMe=CH2}BF4 (3b) undergoes a cyclization process yielding 6b containing a eta2-cyclic allene ligand which is fully characterized by single-crystal X-ray diffraction analysis. Analogous complexes 4a' and 6b' ([Ru] = (eta5-C5H5)(dppe)Ru) containing dppe ligands were similarly obtained from protonation of the corresponding acetylide complexes via formation of vinylidene intermediate. Protonation of the acetylide complex containing a terminal alkynyl group [Ru]-CCCPh2CH2CCH (2c) generates the vinylidene complex {[Ru]=C=CHCPh2CH2CCH}BF4 (3c) which again undergoes an irreversible transformation to give {[Ru]=C=CHCH2CPh2CCH}BF4 (4c) possibly via a pi-coordinated alkynyl complex followed by hydrogen and metal migration. No similar transformation is observed for the analogous dppe complex 3c'. With an extra methylene group, complex {[Ru]=C=CHCPh2CH2CH2CH=CH2}BF4 (3d) and complex {[Ru]=C=CHCPh2CH2Ph}BF4 (3e) are stable. The presence of a gem-diphenylmethylene moiety at the vinylidene ligand with the appropriate terminal vinyl or alkynyl group along with the correct steric environment implements such a novel reactivity in the ruthenium vinylidene complexes.