RESUMEN
Chiral perovskites play a pivotal role in spintronics and optoelectronic systems attributed to their chiral-induced spin selectivity (CISS) effect. Specifically, they allow for spin-polarized charge transport in spin light-emitting diodes (LEDs), yielding circularly polarized electroluminescence at room temperature without external magnetic fields. However, chiral lead bromide-based perovskites have yet to achieve high-performance green emissive spin-LEDs, owing to limited CISS effects and charge transport. Herein, we employ dimensional regulation and Sn2+-doping to optimize chiral bromide-based perovskite architecture for green emissive spin-LEDs. The optimized (PEA)x(S/R-PRDA)2-xSn0.1Pb0.9Br4 chiral perovskite film exhibits an enhanced CISS effect, higher hole mobility, and better energy level alignment with the emissive layer. These improvements allow us to fabricate green emissive spin-LEDs with an external quantum efficiency (EQE) of 5.7% and an asymmetry factor |gCP-EL| of 1.1 × 10-3. This work highlights the importance of tailored perovskite architectures and doping strategies in advancing spintronics for optoelectronic applications.
RESUMEN
Background: Autophagy played a crucial regulatory role in tumor initiation and progression. Therefore, we aimed to comprehensively analyze autophagy-related genes (ARGs) in gastric cancer, focusing on their expression, prognostic value, and potential functions. Methods: The gastric cancer gene chip datasets (GSE79973 and GSE54129) were collected from the Gene Expression Omnibus (GEO) database. Subsequently, the Limma package was employed to identify differentially expressed genes (DEGs) between the normal and disease groups. The selected ARGs were further authenticated using the Human Protein Atlas (HPA) database, The Cancer Genome Atlas (TCGA) database, and GSE19826 database. Results: A total of 15 autophagy-related DEGs, eight of which were upregulated [FKBP1A, IL24, PEA15, HSP90AB1, cathepsin B (CTSB), ITGB1, SPHK1, HIF1A], while seven were downregulated (DAPK2, EIF2AK3, FKBP1B, PTK6, NKX2-3, NFE2L2, PRKCD). Analysis revealed that CTSB was specifically associated with the prognosis of gastric cancer patients. Gene set enrichment analysis (GSEA) showcased a significant enrichment of CTSB-related genes within immune-related pathways. Moreover, correlation analysis demonstrated a clear association between the expression of CTSB and immune infiltration. The upregulation of CTSB in gastric cancer was linked to poor survival and increased immune infiltration. Conclusions: We conjectured that CTSB likely played a critical role in regulating immunity and autophagy in gastric cancer.
RESUMEN
Inorganic cesium lead bromide nanocrystals (CsPbBr3 NCs) hold promising prospects for high performance green light-emitting diodes (LEDs) due to their exceptional color purity and high luminescence efficiency. However, the common ligands employed for passivating these indispensable NCs, such as long-chain organic ligands like oleic acid and oleylamine (OA/OAm), display highly dynamic binding and electronic insulating issues, thereby resulting in a low efficiency of the as-fabricated LEDs. Herein, we report a new zwitterionic short-branched alkyl sulfobetaine ligand, namely trioctyl(propyl-3-sulfonate) ammonium betaine (TOAB), to in situ passivate CsPbBr3 NCs via a feasible one-step solution synthesis, enabling efficiency improvement of CsPbBr3 NC-based LEDs. The zwitterionic TOAB ligand not only strengthened the surface passivation of CsPbBr3 NCs with a high photoluminescence quantum yield (PLQY) of 97%, but also enhanced the carrier transport in the fabricated CsPbBr3 NC thin films due to the short-branched alkyl design. Consequently, CsPbBr3 NCs passivated with TOAB achieved a green LED with an external quantum efficiency (EQE) of 7.3% and a maximum luminance of 5716 cd m-2, surpassing those of LEDs based on insulating long-chain ligand-passivated NCs. Our work provides an effective surface passivation ligand design to enhance the performance of CsPbBr3 NC-based LEDs.
RESUMEN
Halide superionic conductors (SICs) are drawing significant research attention for their potential applications in all-solid-state batteries. A key challenge in developing such SICs is to explore and design halide structural frameworks that enable rapid ion movement. In this work, we show that the close-packed anion frameworks shared by traditional halide ionic conductors face intrinsic limitations in fast ion conduction, regardless of structural regulation. Beyond the close-packed anion frameworks, we identify that the non-close-packed anion frameworks have great potential to achieve superionic conductivity. Notably, we unravel that the non-close-packed UCl3-type framework exhibit superionic conductivity for a diverse range of carrier ions, including Li+, Na+, K+, and Ag+, which are validated through both ab initio molecular dynamics simulations and experimental measurements. We elucidate that the remarkable ionic conductivity observed in the UCl3-type framework structure stems from its significantly more distorted site and larger diffusion channel than its close-packed counterparts. By employing the non-close-packed anion framework as the key feature for high-throughput computational screening, we also identify LiGaCl3 as a promising candidate for halide SICs. These discoveries provide crucial insights for the exploration and design of novel halide SICs.
RESUMEN
Li6PS5Cl (LPSC) is a very attractive sulfide solid electrolyte for developing high-performance all-solid-state lithium batteries. However, it cannot suppress the growth of lithium dendrites and then can only tolerate a small critical current density (CCD) before getting short-circuited to death. Learning from that a newly-developed LaCl3-based electrolyte (LTLC) can afford a very large CCD, a three-layer sandwich-structured electrolyte is designed by inserting LTLC inside LPSC. Remarkably, compared with bland LPSC, this hybrid electrolyte LPSC/LTLC/LPSC presents extraordinary performance improvements: the CCD gets increased from 0.51 to 1.52 mA cm-2, the lifetime gets prolonged from 7 h to >500 h at the cycling current of 0.5 mA cm-2 in symmetric cells, and the cyclability gets extended from 10 cycles to >200 cycles at the cycling rate of 0.5 C and 30 °C in Li|electrolyte|NCM721 full cells. The enhancing reasons are assigned to the capability of LTLC to scavenge lithium dendrites, forming a passive layer of Ta, La, and LiCl.
RESUMEN
Solid electrolytes (SEs) are central components that enable high-performance, all-solid-state lithium batteries (ASSLBs). Amorphous SEs hold great potential for ASSLBs because their grain-boundary-free characteristics facilitate intact solid-solid contact and uniform Li-ion conduction for high-performance cathodes. However, amorphous oxide SEs with limited ionic conductivities and glassy sulfide SEs with narrow electrochemical windows cannot sustain high-nickel cathodes. Herein, we report a class of amorphous Li-Ta-Cl-based chloride SEs possessing high Li-ion conductivity (up to 7.16 mS cm-1) and low Young's modulus (approximately 3 GPa) to enable excellent Li-ion conduction and intact physical contact among rigid components in ASSLBs. We reveal that the amorphous Li-Ta-Cl matrix is composed of LiCl43-, LiCl54-, LiCl65- polyhedra, and TaCl6- octahedra via machine-learning simulation, solid-state 7Li nuclear magnetic resonance, and X-ray absorption analysis. Attractively, our amorphous chloride SEs exhibit excellent compatibility with high-nickel cathodes. We demonstrate that ASSLBs comprising amorphous chloride SEs and high-nickel single-crystal cathodes (LiNi0.88Co0.07Mn0.05O2) exhibit â¼99% capacity retention after 800 cycles at â¼3 C under 1 mA h cm-2 and â¼80% capacity retention after 75 cycles at 0.2 C under a high areal capacity of 5 mA h cm-2. Most importantly, a stable operation of up to 9800 cycles with a capacity retention of â¼77% at a high rate of 3.4 C can be achieved in a freezing environment of -10 °C. Our amorphous chloride SEs will pave the way to realize high-performance high-nickel cathodes for high-energy-density ASSLBs.
RESUMEN
Freeze-casting has been wildly exploited to construct porous ceramics but usually requires costly and demanding freeze-drying (high vacuum, size limit, and supercooled chamber), which can be avoided by the ambient pressure drying (APD) technique. However, applying APD to freeze-cast ceramic based on an aqueous suspension is still challenging due to inert surface chemistry. Herein, a modified APD strategy is developed to improve the drying process of freeze-cast ceramics by exploiting the simultaneous ice etching, ionic cross-linking, and solvent exchange under mild conditions (-10-0 °C, ambient pressure). This versatile strategy is applicable to various ceramic species, metal ions, and freezing techniques. The incorporated metal ions not only enhance liquid-phase sintering, producing ceramics with higher density and mechanical properties than freeze-cast counterparts, but also render customizable coloration and antibacterial property. The cost-/time-efficient APD is promising for mass production and even successive production of large-size freeze-cast ceramics that exceed the size of commercial freeze-dryers.
RESUMEN
Lead halide perovskite nanocrystals are promising for next-generation high-definition displays, especially in light of their tunable bandgaps, high color purities, and high carrier mobility. Within the past few years, the external quantum efficiency of perovskite nanocrystal-based light-emitting diodes has progressed rapidly, reaching the standard for commercial applications. However, the low operational stability of these perovskite nanocrystal-based light-emitting diodes remains a crucial issue for their industrial development. Recent experimental evidence indicates that the migration of ionic species is the primary factor giving rise to the performance degradation of perovskite nanocrystal-based light-emitting diodes, and ion migration is closely related to the defects on the surface of perovskite nanocrystals and at the grain boundaries of their thin films. In this review, we focus on the central idea of surface reconstruction of perovskite nanocrystals, discuss the influence of surface defects on halide ion migration, and summarize recent advances in resurfacing perovskite nanocrystal strategies toward mitigating halide ion migration to improve the stability of the as-fabricated light-emitting diode devices. From the perspective of perovskite nanocrystal resurfacing, we set out a promising research direction for improving both the spectral and operational stability of perovskite nanocrystal-based light-emitting diodes.
RESUMEN
In this study, we successfully prepared core-shell heterostructured nanocomposites (Fe NWs@SiO2), with ferromagnetic nanowires (Fe NWs) as the core and silica (SiO2) as the shell. The composites exhibited enhanced electromagnetic wave absorption and oxidation resistance and were synthesized using a simple liquid-phase hydrolysis reaction. We tested and analyzed the microwave absorption properties of Fe NWs@SiO2 composites with varied filling rates (mass fractions of 10 wt%, 30 wt%, and 50 wt% after mixing with paraffin). The results showed that the sample filled with 50 wt% had the best comprehensive performance. At the matching thickness of 7.25 mm, the minimum reflection loss (RLmin) could reach -54.88 dB at 13.52 GHz and the effective absorption bandwidth (EAB, RL < -10 dB) could reach 2.88 GHz in the range of 8.96-17.12 GHz. Enhanced microwave absorption performance of the core-shell structured Fe NWs@SiO2 composites could be attributed to the magnetic loss of the composite, the core-shell heterogeneous interface polarization effect, and the small-scale effect induced by the one-dimensional structure. Theoretically, this research provided Fe NWs@SiO2 composites with highly absorbent and antioxidant core-shell structures for future practical applications.
Asunto(s)
Nanocables , Dióxido de Silicio , Absorción de Radiación , Hierro , MicroondasRESUMEN
Lead halide perovskite nanocrystals (LHP NCs) are regarded as promising emitters for next-generation ultrahigh-definition displays due to their high color purity and wide color gamut. Recently, the external quantum efficiency (EQE) of LHP NC based light-emitting diodes (PNC LEDs) has been rapidly improved to a level required by practical applications. However, the poor operational stability of the device, caused by halide ion migration at the grain boundary of LHP NC thin films, remains a great challenge. Herein, we report a resurfacing strategy via pseudohalogen ions to mitigate detrimental halide ion migration, aiming to stabilize PNC LEDs. We employ a thiocyanate solution processed post-treatment method to efficiently resurface CsPbBr3 NCs and demonstrate that the thiocyanate ions can effectively inhibit bromide ion migration in LHP NC thin films. Owing to thiocyanate resurfacing, we fabricated LEDs with a high EQE of 17.3%, a maximum brightness of 48000 cd m-2, and an excellent operation half-life time.
RESUMEN
Inorganic superionic conductors possess high ionic conductivity and excellent thermal stability but their poor interfacial compatibility with lithium metal electrodes precludes application in all-solid-state lithium metal batteries1,2. Here we report a LaCl3-based lithium superionic conductor possessing excellent interfacial compatibility with lithium metal electrodes. In contrast to a Li3MCl6 (M = Y, In, Sc and Ho) electrolyte lattice3-6, the UCl3-type LaCl3 lattice has large, one-dimensional channels for rapid Li+ conduction, interconnected by La vacancies via Ta doping and resulting in a three-dimensional Li+ migration network. The optimized Li0.388Ta0.238La0.475Cl3 electrolyte exhibits Li+ conductivity of 3.02 mS cm-1 at 30 °C and a low activation energy of 0.197 eV. It also generates a gradient interfacial passivation layer to stabilize the Li metal electrode for long-term cycling of a Li-Li symmetric cell (1 mAh cm-2) for more than 5,000 h. When directly coupled with an uncoated LiNi0.5Co0.2Mn0.3O2 cathode and bare Li metal anode, the Li0.388Ta0.238La0.475Cl3 electrolyte enables a solid battery to run for more than 100 cycles with a cutoff voltage of 4.35 V and areal capacity of more than 1 mAh cm-2. We also demonstrate rapid Li+ conduction in lanthanide metal chlorides (LnCl3; Ln = La, Ce, Nd, Sm and Gd), suggesting that the LnCl3 solid electrolyte system could provide further developments in conductivity and utility.
RESUMEN
Thermochromic phosphors are intriguing materials for realizing thermochromic behaviors of light-emitting diodes. Here a highly luminescent and stable thermochromic phosphor based on one-dimensional Cu4 I6 (4-dimethylamino-1-ethylpyridinium)2 is reported. This unique ionic copper-iodine chain-based hybrid exhibits near-unity photoluminescence efficiency owing to the through-space charge-transfer character of relevant electronic transitions. More importantly, an alternative mechanism of thermochromic phosphorescence was unraveled, supported by a first principles simulation of concerted copper atom migration in the copper-iodine chain. Furthermore, we successfully fabricate a bright thermochromic light-emitting diode using this Cu4 I6 (4-dimethylamino-1-ethylpyridinium)2 thermochromic phosphor. Our reported flexible ionic copper-iodine chain-based thermochromic luminescent material represents a new type of cost-effective functional phosphor.
RESUMEN
α-Glucosidase is the key enzyme on carbohydrate metabolism, and its bioactive inhibitors are supposed to be an effective therapeutic for type 2 diabetes mellitus. During our continuing study for discovering α-glucosidase inhibitors, a fungus GDZZ-G2 which is derived from a medicinal plant Callicarpa kwangtungensis Chun, exhibited significant inhibition on α-glucosidase. The strain was identified as Fusarium incarnatum by morphological and molecular methods. Further bioassay-guided fractionation result in six known secondary metabolites (1-6). All the compounds except 4 were isolated from F. incarnatum for the first time. Among them, an anthraquinonoid (S)-1,3,6-trihydroxy-7-(1-hydroxyethyl)anthracene-9,10-dione (compound 1) exhibited strong inhibitory effect against α-glucosidase (IC50 = 77.67 ± 0.67 µΜ), compared with acarbose (IC50 = 711.8 ± 5 µΜ). An enzyme kinetics analysis revealed that compound 1 was an uncompetitive inhibitor. Besides, docking simulations predicted that compound 1 inhibited α-glucosidase substrate complex by binding Gln322, Gly306, Thr307, and Ser329 through hydrogen-bond interactions. Our findings suggested that compound 1 can be considered a lead compound for further modifications and the development of a new effective drug candidate in the treatment of type 2 diabetes mellitus.
Asunto(s)
Diabetes Mellitus Tipo 2 , Fusarium , alfa-Glucosidasas , Diabetes Mellitus Tipo 2/tratamiento farmacológico , Inhibidores de Glicósido Hidrolasas/farmacología , Inhibidores de Glicósido Hidrolasas/química , Fusarium/metabolismo , Simulación del Acoplamiento Molecular , CinéticaRESUMEN
Hierarchically structured chiral luminescent materials hold promise for achieving efficient circularly polarized luminescence. However, a feasible chemical route to fabricate hierarchically structured chiral luminescent polycrystals is still elusive because of their complex structures and complicated formation process. We here report a biomimetic non-classical crystallization (BNCC) strategy for preparing efficient hierarchically structured chiral luminescent polycrystals using well-designed highly luminescent homochiral copper(I)-iodide hybrid clusters as basic units for non-classical crystallization. By monitoring the crystallization process, we unravel the BNCC mechanism, which involves crystal nucleation, nanoparticles aggregation, oriented attachment, and mesoscopic transformation processes. We finally obtain the circularly polarized phosphors with both high luminescent efficiency of 32% and high luminescent dissymmetry factor of 1.5 × 10-2, achieving the demonstration of a circularly polarized phosphor converted light emitting diode with a polarization degree of 1.84% at room temperature. Our designed BNCC strategy provides a simple, reliable, and large-scale synthetic route for preparing bright circularly polarized phosphors.
Asunto(s)
Biomimética , Mediciones Luminiscentes , Cristalización , LuminiscenciaRESUMEN
Conventional electric double-layer capacitors are energy storage devices with a high specific power and extended cycle life. However, the low energy content of this class of devices acts as a stumbling block to widespread adoption in the energy storage field. To circumvent the low-energy drawback of electric double-layer capacitors, here we report the assembly and testing of a hybrid device called electrocatalytic hydrogen gas capacitor containing a hydrogen gas negative electrode and a carbon-based positive electrode. This device operates using pH-universal aqueous electrolyte solutions (i.e., from 0 to 14) in a wide temperature range (i.e., from - 70 °C to 60 °C). In particular, we report specific energy and power of 45 Wh kg-1 and 458 W kg-1 (both values based on the electrodes' active materials mass), respectively, at 1 A g-1 and 25 °C with 9 M H3PO4 electrolyte solution. The device also enables capacitance retention of 85% (final capacitance of about 114 F g-1) after 100,000 cycles at 10 A g-1 and 25 °C with 1 M phosphate buffer electrolyte solution.
RESUMEN
Water electrolysis (WE) is a highly promising approach to producing clean hydrogen. Medium-temperature WE (100-350 °C) can improve the energy efficiency and utilize the low-grade water vapor. Therefore, a high-temperature proton-conductive membrane is desirable to realize the medium-temperature WE. Here, we present a polyvinyl chloride (PVC)-poly(4vinylpyridine) (P4VP) hybrid membrane by a simple cross-linking of PVC and P4VP. The pyridine groups of P4VP promote the loading rate of phosphoric acid, which delivers the proton conductivity of the PVC-P4VP membrane. The optimized PVC-P4VP membrane with a 1:2 content ratio offers the maximum proton conductivity of 4.3 × 10-2 S cm-1 at 180 °C and a reliable conductivity stability in 200 h at 160 °C. The PVC-P4VP membrane electrode is covered by an IrO2 anode, and a Pt/C cathode delivers not only the high water electrolytic reactivity at 100-180 °C but also the stable WE stability at 180 °C.
RESUMEN
Exploring new solid electrolytes (SEs) for lithium-ion conduction is significant for the development of rechargeable all-solid-state lithium batteries. Here, a lead-free organic-inorganic halide perovskite, MASr0.8Li0.4Cl3 (MA = methylammonium, CH3NH3 in formula), is reported as a new SE for Li-ion conduction due to its highly symmetric crystal structure, inherent soft lattice, and good tolerance for composition tunability. Via density functional theory calculations, we demonstrate that the hybrid perovskite framework can allow fast Li-ion migration without the collapse of the crystal structure. The influence of the lithium content in MASr1-xLi2xCl3 (x = 0.1, 0.2, 0.3, or 0.4) on Li+ migration is systematically investigated. At the lithium content of x = 0.2, the MASr0.8Li0.4Cl3 achieves the room-temperature lithium ionic conductivity of 7.0 × 10-6 S cm-1 with a migration energy barrier of â¼0.47 eV. The lithium-tin alloy (Li-Sn) symmetric cell exhibits stable electrochemical lithium plating/stripping for nearly 100 cycles, indicating the alloy anode compatibility of the MASr0.8Li0.4Cl3 SE. This lead-free organic-inorganic halide perovskite SE will open a new avenue for exploring new SEs.
RESUMEN
Xanthine oxidase (XO) catalyzes the oxidation of hypoxanthine to xanthine, which is further converted to uric acid. The excessive production or reduced excretion of the purine terminal metabolite may lead to hyperuricemia. In our ongoing search for new xanthine oxidase inhibitors, 14 endophytic fungi were isolated for the first time from a medicinal plant Callicarpa kwangtungensis Chun, and the ethyl acetate extracts of their culture filtrates were screened for XO inhibitory activity. The extract from an endophytic fungus, characterized as Alternaria alternata GDZZ-J6, exhibited the most potent inhibition of XO. Further fractionation of its secondary metabolites led to the isolation of six compounds. Among them, mycotoxin alternariol (AOH), a dibenzo-α-pyrone derivative, had strong inhibitory activity on XO, and the IC50 value was 0.23 ± 0.01 µM. The potency of XO inhibition by AOH was >12-fold higher as compared to allopurinol (2.98 ± 0.07 µM), a XO inhibitor that has been used clinically. The IC50 values of three dibenzo-α-pyrones from gut microbial metabolites of ellagic acid, urolithins A, B, and C, against XO were further compared, and their structure-activity relationships were discussed. Inhibition kinetic analysis by double-reciprocal Lineweaver-Burk plots demonstrated that AOH was an uncompetitive inhibitor. Follow-up docking studies showed that Gln957, Lys1257, and Phe1153 played an important role by forming hydrogen bonds with AOH. Our findings suggest that AOH may be used as a lead compound for further modification to develop future drug for treating hyperuricemia.
Asunto(s)
Hiperuricemia , Micotoxinas , Inhibidores Enzimáticos/química , Humanos , Hiperuricemia/tratamiento farmacológico , Cinética , Lactonas , Plomo , Xantina Oxidasa/metabolismoRESUMEN
Solid electrolytes (SEs) with superionic conductivity and interfacial stability are highly desirable for stable all-solid-state Li-metal batteries (ASSLMBs). Here, we employ neural network potential to simulate materials composed of Li, Zr/Hf, and Cl using stochastic surface walking method and identify two potential unique layered halide SEs, named Li2ZrCl6 and Li2HfCl6, for stable ASSLMBs. The predicted halide SEs possess high Li+ conductivity and outstanding compatibility with Li metal anodes. We synthesize these SEs and demonstrate their superior stability against Li metal anodes with a record performance of 4000 h of steady lithium plating/stripping. We further fabricate the prototype stable ASSLMBs using these halide SEs without any interfacial modifications, showing small internal cathode/SE resistance (19.48 Ω cm2), high average Coulombic efficiency (â¼99.48%), good rate capability (63 mAh g-1 at 1.5 C), and unprecedented cycling stability (87% capacity retention for 70 cycles at 0.5 C).
RESUMEN
High-voltage spinel cobalt-free LiNi0.5 Mn1.5 O4 (LNMO) is one of the most promising cathode candidates for next-generation lithium-ion batteries (LIBs) due to its high specific capacity, high operating voltage, and low cost. However, inferior electronic conductivity, transition metal dissolution, and fast capacity degradation of LNMO, especially in high mass loading for high areal capacity, are the critical material challenges for its practical application. Herein, trace multiple Cr-Fe-Cu elements doping of LiNi0.45 Cr0.0167 Fe0.0167 Cu0.0167 Mn1.5 O4 (CFC0.5-LNMO) cathode is achieved by a blow-spinning strategy to exhibit very stable cycling at a practical level of areal capacity up to 3 mAh cm-2 . It is demonstrated that the Cu, Fe, and Cr doping into the LNMO lattice can suspend the Mn dissolution and improve the Li ion diffusivity and electronic conductivity of the LNMO host. As a result, the obtained CFC0.5-LNMO cathode exhibits an excellent rate performance (1.75 mAh cm-2 at 1C) and long cycling stability under an areal capacity of 3 mAh cm-2 (78% capacity retention over 300 cycles at 0.5C).