RESUMEN
OBJECTIVES: To investigate the influence of filler type/loading on the micro-tensile fracture strength (µTFS) of adhesive resins, as measured 'immediately' upon preparation and after 1-week water storage ('water-stored'). METHODS: The morphology and particle-size distribution of three filler particles, referred to as 'Glass-S' (Esschem Europe), 'BioUnion' (GC), and 'CPC_Mont', were correlatively characterized by SEM, TEM, and particle-size analysis. These filler particles were incorporated into an unfilled adhesive resin ('BZF-29unfilled', GC) in different concentrations to measure the 'immediate' µTFS. After 1-week water storage, the 'water-stored' µTFS of the experimental particle-filled adhesive resins with the most optimum filler loading, specific for each filler type, was measured. In addition, the immediate and water-stored µTFS of the adhesive resins of three experimental two-step universal adhesives based on the same resin matrix but varying for filler type/loading, coded as 'BZF-21' (containing silica and bioglass), 'BZF-29' (containing solely silica), and 'BZF-29_hv' (highly viscous with a higher silica loading than BZF-29), and of the adhesive resins of the gold-standard adhesives OptiBond FL ('Opti-FL', Kerr) and Clearfil SE Bond 2 ('C-SE2', Kuraray Noritake) was measured along with that of BZF-29unfilled (GC) serving as control/reference. Statistics involved one-way and two-way ANOVA followed by post-hoc multiple comparisons (α<0.05). RESULTS: Glass-S, BioUnion, and CPC_Mont represent irregular fillers with an average particle size of 8.5-9.9 µm. Adding filler to BZF-29unfilled decreased µTFS regardless of filler type/loading. One-week water storage reduced µTFS of all adhesive resins except BZF-21, with the largest reduction in µTFS recorded for BZF-29unfilled. Among the three filler types, the µTFS of the 30 wt% Glass-S and 20 wt% BioUnion filled adhesive resin was not significantly different from the µTFS of BZF-29unfilled upon water storage. CONCLUSIONS: Adding filler particles into adhesive resin did not enhance its micro-tensile fracture strength but appeared to render it less sensitive to water storage as compared to the unfilled adhesive resin investigated.
Asunto(s)
Ensayo de Materiales , Resistencia a la Tracción , Cementos de Resina/química , Resinas Compuestas/química , Propiedades de Superficie , Tamaño de la Partícula , Análisis del Estrés Dental , Cementos Dentales/química , Humanos , Microscopía Electrónica de RastreoRESUMEN
OBJECTIVES: Experimental two-step universal adhesives (2-UAs) providing a particle-filled hydrophobic adhesive resin with a significant film thickness to hydrophobically seal the adhesive interface were designed and synthesized. This study aimed to characterize their interfacial interaction with dentin, to determine whether the 2-UA formulations achieve durable bonding to low C-factor flat dentin and to measure their water sorption. METHODS: Bonding effectiveness of 2-UAs that combine a 10-MDP-based primer with hydrophobic adhesive resins differing only for filler (BZF-21, BZF-29, and BZF-29_hv) were comparatively investigated with the commercial adhesive Clearfil SE Bond 2 (C-SE2, Kuraray Noritake). Adhesive-dentin interfaces were characterized with TEM. Adhesive-resin disks were immersed in distilled water at 37 °C for 1 week, 6 months and 1 year to measure water sorption and solubility. 'Immediate' and 'aged' micro-tensile bond strength (µTBS) of the adhesives applied in etch-and-rinse (E&R) and self-etch (SE) bonding mode to low C-factor flat dentin were measured. Statistical analyses involved linear mixed-effects (LME) modelling and Kruskal-Wallis testing (p < 0.05). RESULTS: TEM revealed that E&R hybrid layers were more sensitive to aging than SE hybrid layers. Lower water sorption was recorded for all UAs compared with C-SE2. The immediate µTBS of BZF-21 and BZF-29 was not significantly different from that of C-SE2. The 1-year aged µTBS of all 2-UAs was significantly lower than that of C-SE2, except for BZF-29 applied in E&R mode. A significant reduction in µTBS upon 1-year aging was recorded for BZF-21 and BZF-29 applied in E&R mode. A significant difference in µTBS between E&R and SE bonding modes was recorded for all adhesives except BZF-21. SIGNIFICANCE: Experimental 2-UAs with a hydrophobic adhesive-resin design produced± 20-µm thick adhesive-resin layers, absorbed less water and resulted in bonding performance that was more aging-resistant when applied in SE than in E&R bonding mode. The silica-filled BZF-29 2-UA revealed the most comparable bonding performance with C-SE2 in a low C-factor condition (flat dentin).
Asunto(s)
Recubrimiento Dental Adhesivo , Cementos Dentales , Recubrimientos Dentinarios/química , Recubrimiento Dental Adhesivo/métodos , Cementos de Resina/química , Agua/química , Resistencia a la Tracción , Dentina , Ensayo de Materiales , Adhesivos/química , Resinas Compuestas/químicaRESUMEN
OBJECTIVES: The mono-functional monomer 2-hydroxyethyl methacrylate (HEMA) is often added to universal adhesives (UAs) to improve surface wetting and prevent phase separation. Nevertheless, HEMA promotes water sorption and hydrolysis at adhesive interfaces, hereby affecting long-term bonding to dentin. This study investigated if two acrylamide monomers could replace HEMA in an UA formulation applied in etch-and-rinse (2E&R) and self-etch (1SE) bonding mode. METHODS: Four experimental UAs were bonded to bur-cut dentin. In addition to 12 wt% 10-MDP, 25 wt% Bis-GMA and 10 wt% TEGDMA as common monomer composition, 20 %wt ethanol and 15 %wt water as solvent, and 3 wt% polymerization-related additives, the four formulations solely differed for either the acrylamide cross-linker monomer 'FAM-201' as TEGDMA alternative and HEMA replacement, the hydroxyethyl acrylamide monomer 'HEAA' as HEMA alternative, HEMA ('HEMA+'), or extra TEGDMA in a HEMA-free control ('HEMA-'), all added in a 15 wt% concentration. The split-tooth study design involved application in 2E&R mode on one tooth half versus 1SE mode on the corresponding half. Micro-tensile bond strength of half of the micro-specimens was measured upon 1-week distilled water storage ('immediate' 1w µTBS), with the other half measured after additional 6-month storage ('aged' 6 m µTBS). Statistics involved linear mixed-effects (LME) modelling (p < .05). Additionally, interfacial TEM characterization, thin-film (TF) XRD surface analysis, LogP determination, and a cytotoxicity assay were carried out. RESULTS: FAM-201 revealed significantly higher µTBS than HEMA+ at 1w and 6 m when applied both in E&R and SE bonding modes. HEAA's µTBS was significantly lower than that of HEMA+ at 1w when applied in SE mode. TF-XRD and TEM revealed similar chemical and ultrastructural interfacial characterization, including stable 10-MDP_Ca salt nano-layering. FAM-201 was least cytotoxic and presented with an intermediary LogP, while HEAA presented with the highest LogP, indicating high hydrophilicity and water-sorption sensitivity. SIGNIFICANCE: The acrylamide co-monomer FAM-201 could replace HEMA in an UA formulation, while HEAA not.
Asunto(s)
Recubrimiento Dental Adhesivo , Cementos Dentales , Cementos Dentales/química , Cementos de Resina/química , Recubrimientos Dentinarios/química , Acrilamida , Metacrilatos/química , Agua/química , Dentina/ultraestructura , Resistencia a la Tracción , Ensayo de MaterialesRESUMEN
CLINICAL RELEVANCE: Use of zirconia primers with a low pH and a high acidic monomer concentration should be employed in combination with dual-cure resin cements that are less sensitive to an acidic environment. Primers with lower 10-MDP concentrations attain better outcomes.
Asunto(s)
Recubrimiento Dental Adhesivo , Cementos de Resina , Ensayo de Materiales , Metacrilatos , Resistencia al Corte , Propiedades de Superficie , CirconioRESUMEN
Ceramic restorations are often adhesively luted onto the tooth prep. The so-called touch-cure concept was developed to yield optimum polymerization of composite cement at the restoration-cement-tooth interface for immediate bond stabilization. Although this touch cure is theorized to initiate polymerization at the interface when the accelerator in the primer makes contact with the cement, this process has not yet been proven. This study aimed to elucidate the mechanism of touch cure by measuring the degree of conversion (DC) of composite cement applied with or without an accelerator-containing tooth primer (TP) versus an accelerator-free primer using real-time Fourier-transform infrared spectroscopy (RT-FTIR) and attenuated total reflection (ATR)-FTIR. Interfacial bond strength was measured in shear mode, the accelerator composition confirmed by X-ray fluorescence analysis (XRF), and the interfacial interaction of TP and composite cement with dentin investigated by X-ray diffraction (XRD), focused-ion-beam scanning electron microscopy (FIB-SEM) with 3-dimensional interface reconstruction, and transmission electron microscopy (TEM). RT/ATR-FTIR revealed the significantly highest DC when the composite cement was applied with the accelerator-containing primer. XRF disclosed a vanadium compound as a novel chemical accelerator within TP, instead of a classic chemical curing initiator system, to set off touch cure as soon the cement contacts the previously applied primer. Although the TP contains the acidic functional monomer 10-MDP for adhesion to tooth tissue, touch cure using the accelerator-containing TP combined the fastest/highest DC with the highest bond strength. FIB-SEM and TEM confirmed the tight interfacial interaction at dentin with submicron hybridization along with stable 10-MDP also Ca-salt nanolayering.
Asunto(s)
Recubrimiento Dental Adhesivo , Cementos de Resina , Resinas Compuestas , Dentina , Recubrimientos Dentinarios , Ensayo de Materiales , Metacrilatos , Polimerizacion , Propiedades de Superficie , Resistencia a la Tracción , TactoRESUMEN
X-ray diffraction (XRD) surface analysis and ultrastructural interfacial characterization using transmission electron microscopy (TEM) confirmed that the functional monomer 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) self-assembles into nano-layers at adhesive-tooth interfaces. Self-assembled nano-layering is thought to contribute to the durability of bonding to tooth dentin, although this has not been proven yet. In order to disclose this potential bond-durability contribution of nano-layering, we observed the 3-dimensional (3D) spreading of nano-layering by a series of focused-ion-beam (FIB) milled cross sections by scanning electron microscopy (FIB-SEM) and examined the mechanical properties of self-assembled nano-layering using scanning probe microscopy (SPM). A commercial 10-MDP-containing 3-step self-etch adhesive partially demineralized dentin up to submicron depth, forming a submicron hydroxyapatite-rich hybrid layer. TEM chemically and ultrastructurally confirmed the formation of interfacial nano-layering. FIB-SEM 3D reconstructions disclosed a 3D network of self-assembled nano-layering extending from the hybrid layer up to within the adjacent adhesive-resin layer. SPM revealed that nano-layering within the adhesive-resin layer possessed a higher elastic modulus than that of the surrounding adhesive resin, hereby suggesting that nano-layering contributes to the mechanical strength of adhesives like filler particles do. Nano-layering's 3D expanded structure is expected to strengthen the surrounding resin, as well to better interconnect the adhesive-resin layer to the hybrid layer. In conclusion, this exploratory study demonstrated that nano-layering constitutes a strong phase at the adhesive interface, which may contribute to the clinical longevity of the 10-MDP-based bond to dentin.
Asunto(s)
Recubrimiento Dental Adhesivo , Dentina , Cementos Dentales , Recubrimientos Dentinarios , Ensayo de Materiales , Metacrilatos , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Cementos de Resina , Propiedades de Superficie , Resistencia a la TracciónRESUMEN
OBJECTIVE: As frequently added to adhesives, the mono-functional monomer 2-hydroxyethyl methacrylate (HEMA) acts as co-solvent and improves surface wetting. Nevertheless, HEMA promotes watersorption and hydrolysis at adhesive interfaces, affecting bond durability to dentin. This study investigated if two acrylamide co-monomer alternatives could replace HEMA in experimental adhesive-resin formulations as part of 3/2-step universal adhesives applied, respectively, in etch-and-rinse (E&R) and self-etch (SE) bonding modes. METHODS: Upon priming dentin with the 10-MDP-based Clearfil SE Bond 2' primer ('C-SE2p'; Kuraray Noritake), three experimental adhesive resins, consisting of 50 wt.% Bis-GMA, 15 wt.% TEGDMA, and either 35 wt.% diethyl acrylamide ('DEAA'), hydroxyethyl acrylamide ('HEAA') or HEMA ('HEMA+'), were applied. The control HEMA-free adhesive resin contained 60 wt.% Bis-GMA and 40 wt.% TEGDMA ('HEMA-'). All adhesives were evaluated for 'immediate' and 'aged' micro-tensile bond strength (µTBS) to dentin upon, respectively, 1-week (1w) and 6-month (6m) water storage, TEM adhesive-dentin interfacial interaction, 24-h and 6m three-point bending, contact-angle wetting, viscosity and watersorption. RESULTS: Linear mixed-effects model statistics revealed significantly better bonding performance of the adhesives applied in E&R than SE mode, except for DEAA_1w, with the highest µTBSs recorded for DEAA and HEMA- applied in SE mode. In E&R mode, aging did not significantly reduce DEAA's µTBS. Best wetting on primed dentin was recorded for HEMA+, significantly better than DEAA, further HEAA and HEMA-, these directly related to their viscosity. HEAA absorbed significantly more water than all other adhesive-resin formulations. HEMA->DEAA>HEAA>HEMA+ was the significant order for 6m bending strength. CONCLUSIONS: The acrylamide co-monomer DEAA could replace HEMA, while HEAA not.
Asunto(s)
Recubrimiento Dental Adhesivo , Recubrimientos Dentinarios , Acrilamida , Adhesivos , Cementos Dentales , Dentina , Ensayo de Materiales , Metacrilatos , Cementos de Resina , Resistencia a la TracciónRESUMEN
Besides chemically interacting with hard tooth tissue, acidic functional monomers of self-etch adhesives should etch the prepared tooth surface to dissolve the smear layer and to provide surface micro-retention. Although the etching efficacy of functional monomers is commonly determined in terms of pH, the pH of adhesives cannot accurately be measured. Better is to measure the hydroxyapatite (HAp)-dissolving capacity, also considering that functional monomers may form monomer-Ca salts. Here, the etching efficacy of 6 functional monomers (GPDM, phenyl-P, MTEGP, 4-META, 6-MHP and 10-MDP) was investigated. Solutions containing 15 wt% monomer, 45 wt% ethanol, and 40 wt% water were prepared. Initially, we observed enamel surfaces exposed to monomer solution by scanning electron microscopy (SEM). X-ray diffraction (XRD) was employed to detect monomer-Ca salt formation. Phenyl-P exhibited a strong etching effect, while 10-MDP-treated enamel showed substance deposition, which was identified by XRD as 10-MDP-Ca salt. To confirm these SEM/XRD findings, we determined the etching efficacy of functional monomers by measuring both the concentration of Ca released from HAp using inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and the amount of monomer-Ca salt formation using 31P magic-angle spinning (MAS) nuclear magnetic resonance (NMR). ICP-AES revealed that the highest Ca concentration was produced by phenyl-P and the lowest Ca concentration, almost equally, by 4-META and 10-MDP. Only 10-MDP formed 10-MDP-Ca salts, indicating that 10-MDP released more Ca from HAp than was measured by ICP-AES. Part of the released Ca was consumed to form 10-MDP-Ca salts. It is concluded that the repeatedly reported higher bonding effectiveness of 10-MDP-based adhesives must not only be attributed to the more intense chemical bonding of 10-MDP but also to its higher etching potential, a combination the other functional monomers investigated lack.
Asunto(s)
Cementos Dentales/química , Grabado Dental/métodos , Metacrilatos/química , Ácido Fosfonoacético/análogos & derivados , Glicerolfosfato Deshidrogenasa/química , Concentración de Iones de Hidrógeno , Espectroscopía de Resonancia Magnética , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Compuestos Organofosforados/química , Ácido Fosfonoacético/química , Espectrofotometría Atómica , Propiedades de Superficie , Difracción de Rayos XRESUMEN
The interfacial interaction of veneering ceramic with zirconia is still not fully understood. This study aimed to characterize morphologically and chemically the zirconia-veneering ceramic interface. Three zirconia-veneering conditions were investigated: 1) zirconia-veneering ceramic fired on sandblasted zirconia, 2) zirconia-veneering ceramic on as-sintered zirconia, and 3) alumina-veneering ceramic (lower coefficient of thermal expansion [CTE]) on as-sintered zirconia. Polished cross-sectioned ceramic-veneered zirconia specimens were examined using field emission gun scanning electron microscopy (Feg-SEM). In addition, argon-ion thinned zirconia-veneering ceramic interface cross sections were examined using scanning transmission electron microscopy (STEM)-energy dispersive X-ray spectrometry (EDS) at high resolution. Finally, the zirconia-veneering ceramic interface was quantitatively analyzed for tetragonal-to-monoclinic phase transformation and residual stress using micro-Raman spectroscopy (µRaman). Feg-SEM revealed tight interfaces for all 3 veneering conditions. High-resolution transmission electron microscopy (HRTEM) disclosed an approximately 1.0-µm transformed zone at sandblasted zirconia, in which distinct zirconia grains were no longer observable. Straight grain boundaries and angular grain corners were detected up to the interface of zirconia- and alumina-veneering ceramic with as-sintered zirconia. EDS mapping disclosed within the zirconia-veneering ceramic a few nanometers thick calcium/aluminum-rich layer, touching the as-sintered zirconia base, with an equally thick silicon-rich/aluminum-poor layer on top. µRaman revealed t-ZrO2-to-m-ZrO2 phase transformation and residual compressive stress at the sandblasted zirconia surface. The difference in CTE between zirconia- and the alumina-veneering ceramic resulted in residual tensile stress within the zirconia immediately adjacent to its interface with the veneering ceramic. The rather minor chemical elemental shifts recorded in the veneering ceramic did not suffice to draw definitive conclusions regarding potential chemical interaction of the veneering ceramic with zirconia. Sandblasting damaged the zirconia surface and induced phase transformation that also resulted in residual compressive stress. Difference in CTE of zirconia versus that of the veneering ceramic resulted in an unfavorable residual tensile stress at the zirconia-veneering ceramic interface.
Asunto(s)
Cerámica/química , Materiales Dentales/química , Coronas con Frente Estético , Itrio/química , Circonio/química , Aluminio/química , Óxido de Aluminio/química , Argón/química , Calcio/química , Grabado Dental/métodos , Pulido Dental/métodos , Calor , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Nanopartículas/química , Silicio/química , Espectrometría por Rayos X , Espectrometría Raman , Estrés Mecánico , Propiedades de Superficie , TermodinámicaRESUMEN
Transcriptional profile-based subtypes of cancer are often viewed as identifying different diseases from the same tissue origin. Understanding the mechanisms driving the subtypes may be key in development of novel therapeutics but is challenged by lineage-specific expression signals. Using a t-test statistics approach, we compared gene expression subtypes across 12 tumor types, which identified eight transcriptional superclusters characterized by commonly activated disease pathways and similarities in gene expression. One of the largest superclusters was determined by the upregulation of a proliferation signature, significant enrichment in TP53 mutations, genomic loss of CDKN2A (p16(ARF)), evidence of increased numbers of DNA double strand breaks and high expression of cyclin B1 protein. These correlations suggested that abrogation of the P53-mediated apoptosis response to DNA damage results in activation of cell cycle pathways and represents a common theme in cancer. A second consistent pattern, observed in 9 of 11 solid tumor types, was a subtype related to an activated tumor-associated stroma. The similarity in transcriptional footprints across cancers suggested that tumor subtypes are commonly unified by a limited number of molecular themes.
Asunto(s)
Ciclo Celular/genética , Expresión Génica/genética , Genes p53/genética , Mutación/genética , Neoplasias/genética , Proteína p53 Supresora de Tumor/genética , Ciclina B1/genética , Inhibidor p16 de la Quinasa Dependiente de Ciclina/genética , Daño del ADN/genética , Perfilación de la Expresión Génica/métodos , Regulación Neoplásica de la Expresión Génica/genética , Humanos , Pérdida de Heterocigocidad/genéticaRESUMEN
Transcript fusions as a result of chromosomal rearrangements have been a focus of attention in cancer as they provide attractive therapeutic targets. To identify novel fusion transcripts with the potential to be exploited therapeutically, we analyzed RNA sequencing, DNA copy number and gene mutation data from 4366 primary tumor samples. To avoid false positives, we implemented stringent quality criteria that included filtering of fusions detected in RNAseq data from 364 normal tissue samples. Our analysis identified 7887 high confidence fusion transcripts across 13 tumor types. Our fusion prediction was validated by evidence of a genomic rearrangement for 78 of 79 fusions in 48 glioma samples where whole-genome sequencing data were available. Cancers with higher levels of genomic instability showed a corresponding increase in fusion transcript frequency, whereas tumor samples harboring fusions contained statistically significantly fewer driver gene mutations, suggesting an important role for tumorigenesis. We identified at least one in-frame protein kinase fusion in 324 of 4366 samples (7.4%). Potentially druggable kinase fusions involving ALK, ROS, RET, NTRK and FGFR gene families were detected in bladder carcinoma (3.3%), glioblastoma (4.4%), head and neck cancer (1.0%), low-grade glioma (1.5%), lung adenocarcinoma (1.6%), lung squamous cell carcinoma (2.3%) and thyroid carcinoma (8.7%), suggesting a potential for application of kinase inhibitors across tumor types. In-frame fusion transcripts involving histone methyltransferase or histone demethylase genes were detected in 111 samples (2.5%) and may additionally be considered as therapeutic targets. In summary, we described the landscape of transcript fusions detected across a large number of tumor samples and revealed fusion events with clinical relevance that have not been previously recognized. Our results support the concept of basket clinical trials where patients are matched with experimental therapies based on their genomic profile rather than the tissue where the tumor originated.
Asunto(s)
Transformación Celular Neoplásica/genética , Terapia Molecular Dirigida , Neoplasias/genética , Neoplasias/terapia , Proteínas de Fusión Oncogénica/genética , Ensamble y Desensamble de Cromatina/genética , Biología Computacional , Análisis Mutacional de ADN/métodos , Perfilación de la Expresión Génica , Heterogeneidad Genética , Humanos , Terapia Molecular Dirigida/métodos , Neoplasias/clasificación , ARN Mensajero/genética , ARN Neoplásico/genética , Alineación de SecuenciaRESUMEN
Among several functional monomers, 10-methacryloxydecyl dihydrogen phosphate (10-MDP) bonded most effectively to hydroxyapatite (HAp). However, more hydrolysis-resistant functional monomers are needed to improve bond durability. Here, we investigated the adhesive potential of the novel fluoro-carbon functional monomer 6-methacryloxy-2,2,3,3,4,4,5,5-octafluorohexyl dihydrogen phosphate (MF8P; Kuraray Noritake Dental Inc., Tokyo, Japan) by studying its molecular interaction with powder HAp using solid-state nuclear magnetic resonance ((1)H MAS NMR) and with dentin using x-ray diffraction (XRD) and by characterizing its interface ultrastructure at dentin using transmission electron microscopy (TEM). We further determined the dissolution rate of the MF8P_Ca salt, the hydrophobicity of MF8P, and the bond strength of an experimental MF8P-based adhesive to dentin. NMR confirmed chemical adsorption of MF8P onto HAp. XRD and TEM revealed MF8P_Ca salt formation and nano-layering at dentin. The MF8P_Ca salt was as stable as that of 10-MDP; MF8P was as hydrophobic as 10-MDP; a significantly higher bond strength was recorded for MF8P than for 10-MDP. In conclusion, MF8P chemically bonded to HAp. Despite its shorter size, MF8P possesses characteristics similar to those of 10-MDP, most likely to be associated with the strong chemical bond between fluorine and carbon. Since favorable bond strength to dentin was recorded, MF8P can be considered a good candidate functional monomer for bonding.
Asunto(s)
Recubrimiento Dental Adhesivo , Polímeros de Fluorocarbono/química , Fluorocarburos/química , Metacrilatos/química , Organofosfatos/química , Cementos de Resina/química , Adhesividad , Adsorción , Calcio/química , Dentina/ultraestructura , Durapatita/química , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Espectroscopía de Resonancia Magnética/métodos , Ensayo de Materiales , Microscopía Electrónica de Transmisión , Solubilidad , Espectroscopía Infrarroja por Transformada de Fourier , Estrés Mecánico , Propiedades de Superficie , Resistencia a la Tracción , Agua/química , Difracción de Rayos XRESUMEN
The number of carbon atoms and/or ester/polyether groups in spacer chains may influence the interaction of functional monomers with calcium and dentin. The present study assessed the chemical interaction and bond strength of 5 standard-synthesized phosphoric-acid ester functional monomers with different spacer chain characteristics, by atomic absorption spectroscopy (AAS), ATR-FTIR, thin-film x-ray diffraction (TF-XRD), scanning electron microscopy (SEM), and microtensile bond strength (µTBS). The tested functional monomers were 2-MEP (two-carbon spacer chain), 10-MDP (10-carbon), 12-MDDP (12-carbon), MTEP (more hydrophilic polyether spacer chain), and CAP-P (intermediate hydrophilicity ester spacer). The intensity of monomer-calcium salt formation measured by AAS differed in the order of 12-MDDP=10-MDP>CAP-P>MTEP>2-MEP. FTIR and SEM analyses of monomer-treated dentin surfaces showed resistance to rinsing for all monomer-dentin bonds, except with 2-MEP. TF-XRD confirmed the weaker interaction of 2-MEP. Highest µTBS was observed for 12-MDDP and 10-MDP. A shorter spacer chain (2-MEP) of phosphate functional monomers induced formation of unstable monomer-calcium salts, and lower chemical interaction and dentin bond strength. The presence of ester or ether groups within longer spacer carbon chains (CAP-P and MTEP) may affect the hydrophilicity, µTBS, and also the formation of monomer-calcium salts.
Asunto(s)
Recubrimiento Dental Adhesivo , Metacrilatos/química , Cementos de Resina/química , Calcio/química , Carbono/química , Resinas Compuestas/química , Dentina/ultraestructura , Compuestos Epoxi , Resinas Epoxi/química , Alcoholes Grasos/química , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Organofosfatos/química , Polietilenglicoles/química , Ácidos Polimetacrílicos/química , Espectrofotometría Atómica , Espectroscopía Infrarroja por Transformada de Fourier , Estrés Mecánico , Propiedades de Superficie , Resistencia a la Tracción , Difracción de Rayos XRESUMEN
Previous research showed that the functional monomer 10-methacryloxydecyl dihydrogen phosphate (MDP) ionically bonds to hydroxyapatite (HAp) and forms a nano-layered structure at the interface with HAp-based substrates. Such hydrophobic nano-layering is considered to contribute to the long-term durability of the bond to tooth tissue. However, dental adhesives are complex mixtures usually containing different monomers. This study investigated the effect of the monomer 2-hydroxyethylmethacrylate (HEMA) on the chemical interaction of MDP with HAp by x-ray diffraction (XRD), nuclear magnetic resonance (NMR), and quartz crystal microbalance (QCM). We examined the chemical interaction of 5 experimental MDP solutions with increasing concentrations of HEMA. XRD revealed that addition of HEMA inhibits nano-layering at the interface, while NMR confirmed that MDP remained adsorbed onto the HAp surface. QCM confirmed this adsorption of MDP to HAp, as well as revealed that the demineralization rate of HAp by MDP was reduced by HEMA. It was concluded that even though the adsorption of MDP to HAp was not hindered, addition of HEMA inhibited interfacial nano-layering. Potential consequences with regard to bond durability necessitate further research.
Asunto(s)
Recubrimiento Dental Adhesivo , Durapatita/química , Metacrilatos/química , Cristalografía por Rayos X , Interacciones Hidrofóbicas e Hidrofílicas , Espectroscopía de Resonancia Magnética , Nanoestructuras , Tecnicas de Microbalanza del Cristal de CuarzoRESUMEN
According to the 'Adhesion-Decalcification' concept, specific functional monomers within dental adhesives can ionically interact with hydroxyapatite (HAp). Such ionic bonding has been demonstrated for 10-methacryloyloxydecyl dihydrogen phosphate (MDP) to manifest in the form of self-assembled 'nano-layering'. However, it remained to be explored if such nano-layering also occurs on tooth tissue when commercial MDP-containing adhesives (Clearfil SE Bond, Kuraray; Scotchbond Universal, 3M ESPE) were applied following common clinical application protocols. We therefore characterized adhesive-dentin interfaces chemically, using x-ray diffraction (XRD) and energy-dispersive x-ray spectroscopy (EDS), and ultrastructurally, using (scanning) transmission electron microscopy (TEM/STEM). Both adhesives revealed nano-layering at the adhesive interface, not only within the hybrid layer but also, particularly for Clearfil SE Bond (Kuraray), extending into the adhesive layer. Since such self-assembled nano-layering of two 10-MDP molecules, joined by stable MDP-Ca salt formation, must make the adhesive interface more resistant to biodegradation, it may well explain the documented favorable clinical longevity of bonds produced by 10-MDP-based adhesives.
Asunto(s)
Recubrimientos Dentinarios/química , Dentina/ultraestructura , Durapatita/química , Metacrilatos/química , Nanoestructuras/química , Recubrimiento Dental Adhesivo , Microanálisis por Sonda Electrónica , Humanos , Microscopía Electrónica de Transmisión de Rastreo , Microscopía Electrónica de Transmisión , Cementos de Resina/química , Espectrometría por Rayos X , Propiedades de Superficie , Difracción de Rayos XRESUMEN
OBJECTIVES: Resin-based dental materials are not inert in the oral environment, and may release components, initially due to incomplete polymerization, and later due to degradation. Since there are concerns regarding potential toxicity, more precise knowledge of the actual quantity of released eluates is necessary. However, due to a great variety in analytical methodology employed in different studies and in the presentation of the results, it is still unclear to which quantities of components a patient may be exposed. The objective of this meta-analytical study was to review the literature on the short- and long-term release of components from resin-based dental materials, and to determine how much (order of magnitude) of those components may leach out in the oral cavity. METHODS: Out of an initial set of 71 studies, 22 were included. In spite of the large statistical incertitude due to the great variety in methodology and lack of complete information (detection limits were seldom mentioned), a meta-analytical mean for the evaluated eluates was calculated. To relate the amount of potentially released material components with the size of restorations, the mean size of standard composite restorations was estimated using a 3D graphical program. RESULTS: While the release of monomers was analyzed in many studies, that of additives, such as initiators, inhibitors and stabilizers, was seldom investigated. Significantly more components were found to be released in organic than in water-based media. Resin-based dental materials might account for the total burden of orally ingested bisphenol A, but they may release even higher amounts of monomers, such as HEMA, TEGDMA, BisGMA and UDMA. Compared to these monomers, similar or even higher amounts of additives may elute, even though composites generally only contain very small amounts of additives. A positive correlation was found between the total quantity of released eluates and the volume of extraction solution. SIGNIFICANCE: There is a clear need for more accurate and standardized analytical research to determine the long-term release from resin-based materials. Several guidelines for standardization are proposed.
Asunto(s)
Resinas Compuestas/química , Materiales Dentales/química , Compuestos de Bencidrilo , Bisfenol A Glicidil Metacrilato/química , Fenómenos Químicos , Restauración Dental Permanente , Humanos , Metacrilatos/química , Fenoles/química , Polietilenglicoles/química , Polimerizacion , Ácidos Polimetacrílicos/química , Poliuretanos/química , Propiedades de Superficie , Factores de TiempoRESUMEN
Previous research, in which the bonding effectiveness of the 3 self-etch monomers HAEPA, EAEPA, and MAEPA was determined, showed that MAEPA was most effective. In this study, the molecular interactions of these monomers with hydroxyapatite and dentin were investigated by combining x-ray diffraction, infrared spectroscopy, and scanning electron microscopy. We tested the null hypothesis that the bonding performance of these monomers does not correlate to the formation of monomer-calcium salts and to hydrolytic stability of these monomer-calcium complexes. Monomer/ethanol/water solutions were prepared and applied to synthetic hydroxyapatite and dentin. While HAEPA and EAEPA dissolved dentin considerably and deposited unstable calcium-phosphate salts (DCPD), MAEPA formed hydrolysis-resistant monomer-calcium salts that remained attached to the dentin surface even after being washed. The chemical stability of the monomer-Ca salts was thought to contribute in particular to the bond durability, but this study shows that the formation of stable monomer-calcium salts also enhances the 'immediate' bonding performance of self-etch adhesives.
Asunto(s)
Acrilatos/química , Recubrimiento Dental Adhesivo , Recubrimientos Dentinarios/química , Organofosfonatos/química , Cementos de Resina/química , Grabado Ácido Dental/métodos , Animales , Fosfatos de Calcio/química , Bovinos , Dentina/química , Solubilidad de la Dentina , Durapatita/química , Hidrólisis , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Estructura Molecular , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
This paper reflects on the state of the art of self-etch adhesives anno 2010. After presenting the general characteristics of self-etch adhesives, the major shortcomings of the most simple-to-use one-step (self-etch) adhesives are addressed. Special attention is devoted to the AD-concept and the benefit of chemical interfacial interaction with regard to bond durability. Finally, issues like the potential interference of surface smear and the more challenging bond to enamel for 'mild' self-etch adhesives are discussed.
Asunto(s)
Recubrimientos Dentinarios/química , Grabado Ácido Dental , Fenómenos Químicos , Colágeno/química , Recubrimiento Dental Adhesivo , Esmalte Dental/ultraestructura , Dentina/ultraestructura , Durapatita/química , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Polimerizacion , Capa de Barro DentinarioRESUMEN
A 54-year-old man was admitted to our hospital because of chest discomfort. Cardiac catheterization revealed partial anomalous pulmonary venous connection with an intact atrial septum. The right upper pulmonary vein (RUPV) drained into the upper segment of the superior vena cava (SVC). Using the Williams procedure, an atrial septal defect (ASD) was created and a fresh autologous pericardial patch was used to fashion a new pulmonary vein return route from SVC to the ASD. Although the patient was stable after the procedure, he was admitted again 6 months later because of obstruction of RUPV. At reoperation, it was found that the previous pulmonary vein route was obstructed and that the pericardial baffle had adhered to the atrial septum above the ASD. The shrunken and thickened pericardial baffle was removed and the orifice of the ASD was extensively enlarged, after which an expanded polytetrafluoroethylene (ePTFE) patch was used as a new baffle. After the reoperation, the patient's condition improved.
Asunto(s)
Procedimientos Quirúrgicos Cardiovasculares , Humanos , Masculino , Persona de Mediana Edad , Politetrafluoroetileno , Complicaciones Posoperatorias , Venas Pulmonares/patología , Reoperación , Síndrome de Cimitarra/cirugíaRESUMEN
Two scombropid fishes, Scombrops boops and Scombrops gilberti, are closely related and commercially important species in Japan. These species are often confused in commercial markets because of their morphological similarity. In this study, scombropid specimens collected from various Japanese coastal waters were subjected to polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis and phylogenetic analysis of the 16S rRNA gene in mitochondrial DNA. These analyses showed that all the scombropid specimens collected from localities in the Sea of Japan were identified as S. boops, whereas those from the Pacific Ocean included two species, S. boops and S. gilberti. Almost all juvenile (<200 mm standard body length, S(L)) S. gilberti originated from the Pacific coastal waters of the northern Japan, whereas adults (>400 mm S(L)) were found only in deep water off the Izu Peninsula to the Izu Islands. This suggests that S. gilberti might migrate extensively during its life cycle. In addition, differences in the number of specimens and the distribution between the two species suggest that S. gilberti is less abundant than S. boops in Japanese waters.