RESUMEN
Solar (UVA + UVB) exposure was assessed using the Gafchromic EBT3 film. The coloration change was represented by the net reflective optical density (Net ROD). Through calibrations against a UV-tube lamp, operational relationships were obtained between Net ROD and the (UVA + UVB) exposures (in J cm(-2) or J m(-2)). The useful range was from â¼0.2 to â¼30 J cm(-2). The uniformity of UV irradiation was crucial for an accurate calibration. For solar exposures ranging from 2 to 11 J cm(-2), the predicted Net ROD agreed with the recorded values within 9%, while the predicted exposures agreed with the recorded values within 15%.
Asunto(s)
Dosimetría por Película/métodos , Rayos Ultravioleta , Calibración , Diseño de Equipo , Dosimetría por Película/instrumentación , Factores de TiempoRESUMEN
Nasopharyngeal tumors are commonly treated with intensity-modulated radiotherapy techniques. For photon dose calculations, problems related to loss of lateral electronic equilibrium exist when small fields are used. The anisotropic analytical algorithm (AAA) implemented in Varian Eclipse was developed to replace the pencil beam convolution (PBC) algorithm for more accurate dose prediction in an inhomogeneous medium. The purpose of this study was to investigate the accuracy of the AAA for predicting interface doses for intensity-modulated stereotactic radiotherapy boost of nasopharyngeal tumors. The central axis depth dose data and dose profiles of phantoms with rectangular air cavities for small fields were measured using a 6 MV beam. In addition, the air-tissue interface doses from six different intensity-modulated stereotactic radiotherapy plans were measured in an anthropomorphic phantom. The nasopharyngeal region of the phantom was especially modified to simulate the air cavities of a typical patient. The measured data were compared to the data calculated by both the AAA and the PBC algorithm. When using single small fields in rectangular air cavity phantoms, both AAA and PBC overestimated the central axis dose at and beyond the first few millimeters of the air-water interface. Although the AAA performs better than the PBC algorithm, its calculated interface dose could still be more than three times that of the measured dose when a 2 × 2 cm(2) field was used. Testing of the algorithms using the anthropomorphic phantom showed that the maximum overestimation by the PBC algorithm was 20.7%, while that by the AAA was 8.3%. When multiple fields were used in a patient geometry, the dose prediction errors of the AAA would be substantially reduced compared with those from a single field. However, overestimation of more than 3% could still be found at some points at the air-tissue interface.
Asunto(s)
Algoritmos , Radiometría/métodos , Radioterapia de Intensidad Modulada/métodos , Carcinoma , Humanos , Carcinoma Nasofaríngeo , Neoplasias Nasofaríngeas/radioterapia , Fantasmas de Imagen , Traumatismos por Radiación/prevención & control , Dosificación Radioterapéutica , Reproducibilidad de los ResultadosRESUMEN
This work consists of two parts. In the first part, the doses in the human lung per unit exposure to thoron progeny, the dose conversion factor (DCF), was calculated. Dependence of the DCF on various environmental and subject-related parameters was investigated. The model used in these calculations was based on ICRP 66 recommendations. In the second part, the human lungs were considered as the source of beta and gamma radiation which target the other organs of the human body. The DCF to other organs was obtained as 20 µSv WLM(-1), which is larger than the DCF for radon progeny, which was 13 µSv WLM(-1). This is a consequence of the longer half-life of the relevant thoron progeny than that of the radon progeny. It is interesting to note that after the lungs, where the radiation source is actually located, muscle tissue receives the largest dose.
Asunto(s)
Contaminación del Aire Interior/análisis , Pulmón/efectos de la radiación , Músculos/efectos de la radiación , Monitoreo de Radiación/métodos , Radiometría/métodos , Hijas del Radón/análisis , Radón/análisis , Adulto , Aerosoles , Contaminantes Radiactivos del Aire , Exposición a Riesgos Ambientales , Humanos , Masculino , Modelos Estadísticos , Riesgo , Distribución TisularRESUMEN
Metal Oxide Semiconductor Field Effect Transistors (MOSFET's) are dosimeters which are now frequently utilized in radiotherapy treatment applications. An improved MOSFET, clinical semiconductor dosimetry system (CSDS) which utilizes improved packaging for the MOSFET device has been studied for energy dependence of sensitivity to x-ray radiation measurement. Energy dependence from 50 kVp to 10 MV x-rays has been studied and found to vary by up to a factor of 3.2 with 75 kVp producing the highest sensitivity response. The detectors average life span in high sensitivity mode is energy related and ranges from approximately 100 Gy for 75 kVp x-rays to approximately 300 Gy at 6 MV x-ray energy. The MOSFET detector has also been studied for sensitivity variations with integrated dose history. It was found to become less sensitive to radiation with age and the magnitude of this effect is dependant on radiation energy with lower energies producing a larger sensitivity reduction with integrated dose. The reduction in sensitivity is however approximated reproducibly by a slightly non linear, second order polynomial function allowing corrections to be made to readings to account for this effect to provide more accurate dose assessments both in phantom and in-vivo.
Asunto(s)
Radiometría/instrumentación , Transistores Electrónicos , Relación Dosis-Respuesta en la Radiación , Termodinámica , Rayos XRESUMEN
Gafchromic EBT film, has become a main dosimetric tools for quantitative evaluation of radiation doses in radiation therapy application. One aspect of variability using EBT Gafchromic film is the magnitude of the orientation effect when analysing the film in landscape or portrait mode. This work has utilized a > 99% plane polarized light source and a non-polarized diffuse light source to investigate the absolute magnitude of EBT Gafchromic films polarization or orientation effects. Results have shown that using a non-polarized light source produces a negligible orientation effect for EBT Gafchromic film and thus the angle of orientation is not important. However, the film exhibits a significant variation in transmitted optical density with angle of orientation to polarized light producing more than 100% increase, or over a doubling of measured OD for films irradiated with x-rays up to dose levels of 5 Gy. The maximum optical density was found to be in a plane at an angle of 14 degrees +/- 7 degrees (2 SD) when the polarizing sheet is turned clockwise with respect to the film. As the magnitude of the orientation effect follows a sinusoidal shape it becomes more critical for alignment accuracy of the film with respect to the polarizing direction in the anticlockwise direction as this will place the alignment of the polarizing axes on the steeper gradient section of the sinusoidal pattern. An average change of 4.5% per 5 degrees is seen for an anticlockwise polarizer rotation where as the effect is 1.2% per 5 degrees for an clockwise polarizer rotation. This may have consequences to the positional accuracy of placement of the EBT Gafchromic film on a scanner as even a 1 degree alignment error can cause an approximate 1% error in analysis. The magnitude of the orientation effect is therefore dependant on the degree of polarization of the scanning light source and can range from negligible (diffuse LED light source) through to more than 100% or doubling of OD variation with a fully linear polarized light source.
Asunto(s)
Luz , Radiometría/instrumentación , Relación Dosis-Respuesta en la Radiación , Fenómenos ÓpticosRESUMEN
With new advancements in radiochromic film designs and sensitivity to suit different niche applications, EBT2 is the latest offering for the megavoltage radiotherapy market. New construction specifications including different physical construction and the use of a yellow coloured dye has provided the next generation radiochromic film for therapy applications. The film utilises the same active chemical for radiation measurement as its predecessor, EBT Gafchromic. Measurements have been performed using photo spectrometers to analyse the absorption spectra properties of this new EBT2 Gafchromic, radiochromic film. Results have shown that whilst the physical coloration or absorption spectra of the film, which turns yellow to green as compared to EBT film, (clear to blue) is significantly different due to the added yellow dye, the net change in absorption spectra properties for EBT2 are similar to the original EBT film. Absorption peaks are still located at 636nm and 585nm positions. A net optical density change of 0.590 +/- 0.020 (2SD) for a 1 Gy radiation absorbed dose using 6 MV x-rays when measured at the 636nm absorption peak was found. This is compared to 0.602 +/- 0.025 (2SD) for the original EBT film (2005 Batch) and 0.557 +/- 0.027 (2009 Batch) at the same absorption peak. The yellow dye and the new coating material produce a significantly different visible absorption spectra results for the EBT2 film compared to EBT at wavelengths especially below approximately 550nm. At wavelengths above 550nm differences in absolute OD are seen however, when dose analysis is performed at wavelengths above 550nm using net optical density changes, no significant variations are seen. If comparing results of the late production EBT to new production EBT2 film, net optical density variations of approximately 10 % to 15 % are seen. As all new film batches should be calibrated for sensitivity upon arrival this should not be of concern.
Asunto(s)
Dosimetría por Película/instrumentación , Radioterapia de Alta Energía/instrumentación , Película para Rayos X , Relación Dosis-Respuesta en la Radiación , Diseño de Equipo , Análisis de Falla de Equipo , Dosis de Radiación , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Rayos XRESUMEN
RTQA Gafchromic, radiochromic film is assessed for its radiation energy dependence in photon beams ranging from superficial to megavoltage energies. RTQA radiochromic film has uses in radiation quality assurance procedures due to its auto development and visualisation properties. These properties allow for immediate comparison of x-ray alignment and coincidence not available with radiographic films. Results show that the RTQA film produces an energy dependant darkening to x-rays which results in x-ray energies of 69 keV photon equivalent (150 kVp) to produce 2.14 times the optical density to dose ratio of a 6MV x-ray beam. The following dose ratio's (normalized to 1 at 150 kVp) provide the same net optical density change for RTQA film. 1.47-50 kVp : 1.21-75 kVp : 1.09-100 kVp : 1.01-125 kVp: 1.00-150 kVp : 1.03-200 kVp : 1.07-250 kVp : 2.14-6 MVp : 2.14 10 MVp. Although the film is not designed to be used as a quantitative measure of radiation it is still useful to know its energy response at differing x-ray energies to expose the film to the appropriate dose to provide optimal darkening characteristics for a given QA test at the appropriate energy. Our results have shown that a 0.3 optical density change with RTQA film provides a colour change level useable for accurate alignment procedures
Asunto(s)
Dosimetría por Película/normas , Garantía de la Calidad de Atención de Salud/normas , Radioterapia Conformacional/normas , Australia , Relación Dosis-Respuesta en la Radiación , Diseño de Equipo , Análisis de Falla de Equipo , Dosis de Radiación , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
Accurate calculation and knowledge of backscatter factors (BSF) in superficial x-ray radiotherapy is required to perform accurate absorbed dose determination. These measurements have been performed historically with small thin parallel plate ionisation chambers and Thermoluminescent Dosimeters (TLD's). This note investigates the use of a low energy dependence radiochromic thin film (GAFCHROMIC EBT) for measurement and verification of backscatter factors. A single layer film and an extrapolation method with multiple films have been investigated. 50kVp to 150kVp beams were analysed and results for BSF were measured and compared to IPEMB (Institution of Physics and Engineering in Medicine and Biology UK) derived results. Agreement within 2% (1 SD) was found using both the single layer and extrapolation techniques with IPEMB derived results at 30cm SSD and equivalent photon energies. A 150kVp beam was found to have BSF of 1.12 +/- 0.02 (2cm circle), 1.24 +/- 0.01 (5cm circle), 1.36 +/- 0.02 (10cm circle) respectively compared to 1.11, 1.23 and 1.36 for IPEMB derived results. In summary a single layer film provided an accurate measurement and verification of BSF and was found to be within 2% of derived IPEMB results in all cases. The extrapolation method in general provided a slightly closer match to IPEMB results (<1%) but with no extra discernable accuracy than the single layer film most likely due to the already small thickness (0.3mm) of one film piece. GAFCHROMIC EBT, Radiochromic film provides a very simple and easy method for measurement and verification of BSF for x-ray energies commonly used for superficial x-ray therapy.
Asunto(s)
Dispersión de Radiación , Película para Rayos X , Humanos , Radiometría/métodos , Dosificación Radioterapéutica , Rayos XRESUMEN
We have analyzed the linearity performance of analog fiber-optic links based on electroabsorption modulators (EAM) operating at high optical power. The negative feedback caused by photocurrent generation improves the modulator linearity in the gain saturation regime. In the absence of laser relative intensity noise (RIN), the link spur-free dynamic range (SFDR) increases with the power of four-thirds of the input optical power after gain saturation occurs. A multi-octave SFDR of more than 135 dB/Hz2/3 has been found to be achievable with sufficiently high power.
RESUMEN
Gafchromic EBT film, a new high sensitivity radiochromic film has been tested for variations in optical properties due to scanning orientation. Gafchromic EBT film has been shown to produce a scanning orientation effect whereby variations in measured relative optical density are found due to the films orientation relative to the scanner direction. This relative optical density change was found to be relatively consistent for different films exposed to varying dose levels ranging from 0 Gy to 3 Gy. A maximum variation of 0.0157 +/- 0.0035 in optical density (OD) was found. This relates to an approximate 15% variation in net OD for a 50 cGy irradiated film and 4% variation for a 3 Gy irradiated film. No noticeable effects or variations were seen with changing scanning resolution or with the film placed "up or down" during scanning. Other Gafchromic film types were tested and compared to EBT for unirradiated film to assess the magnitude of this orientation effect on the scanner used and results showed that EBT produced a significantly higher effect that MD-55-2, HS, XR type T and XR type R film by up to 3 times. As such, providing the same orientation of EBT film when scanning for dosimetric analysis becomes an essential part of EBT film dosimetry.
Asunto(s)
Artefactos , Dosimetría por Película/instrumentación , Dosimetría por Película/métodos , Anisotropía , Relación Dosis-Respuesta en la Radiación , Diseño de Equipo , Análisis de Falla de Equipo , Dosis de RadiaciónRESUMEN
EBT Gafchromic film, a new high sensitivity radiochromic film has been tested to evaluate if external pressure on the film can affect absorption spectra analysis and thus radiation dosimetry. This question arises from the fact that Gafchromic film is often cut into smaller pieces or to certain shapes for dosimetric analysis using scissors which can apply significant pressure to the sides of the film and small film pieces are placed within a solid phantom at depth which can produce significant pressure on the film if appropriate weight distribution procedures are not performed. As expected, results have shown that films cut by scissors can produce a large increase in OD near the film edge up to 5-10 mm away due to physical damage to the EBT film layers. Films placed within a solid phantom receiving up to 39.5 kg/cm2 pressure showed negligible differences in measured absorption spectra compared with control films subject to no external pressure. This equates to negligible external pressure effects for as much as 44 cm of 30 cm x 30 cm solid water placed on a 1 cm2 area film piece. As such, we recommend based on results herein, that film analysis should be performed with a boundary around every film edge, which can be defined visually based in the film. Also film dosimetry in a phantom can be performed with weights up to 39.5 kg/cm2 (or 44 cm of 30 cm x 30 cm solid water or equivalent) placed on the film without effecting the absorption spectra and thus dosimetry of radiation beams.
Asunto(s)
Artefactos , Dosimetría por Película/instrumentación , Dosimetría por Película/métodos , Absorción , Relación Dosis-Respuesta en la Radiación , Diseño de Equipo , Análisis de Falla de Equipo , Mecánica , Presión , Dosis de RadiaciónRESUMEN
Gafchromic EBT radiochromic film is one of the newest radiation-induced auto-developing x-ray analysis films available for therapeutic radiation dosimetry in radiotherapy applications. The spectral absorption properties in the visible wavelengths have been investigated and results show two main peaks in absorption located at 636 nm and 585 nm. These absorption peaks are different to many other radiochromic film products such as Gafchromic MD-55 and HS film where two peaks were located at 676 nm and 617 nm respectively. The general shape of the absorption spectra is similar to older designs. A much higher sensitivity is found at high-energy x-rays with an average 0.6 OD per Gy variation in OD seen within the first Gy measured at 636 nm using 6 MV x-rays. This is compared to approximately 0.09 OD units for the first Gy at the 676 nm absorption peak for HS film at 6 MV x-ray energy. The film's blue colour is visually different from older varieties of Gafchromic film with a higher intensity of mid-range blue within the film. The film provides adequate relative absorbed dose measurement for clinical radiotherapy x-ray assessment in the 1-2 Gy dose range which with further investigation may be useful for fractionated radiotherapy dose assessment.
Asunto(s)
Dosimetría por Película/instrumentación , Dosimetría por Película/métodos , Radioterapia/instrumentación , Relación Dosis-Respuesta en la Radiación , Dosis de Radiación , Radioterapia/métodos , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Rayos XRESUMEN
Four field prostate treatments are a standard treatment procedure in radiotherapy. Dose in the prostate and rectum region were calculated for 6MV and 18MV photon beams on an anthropomorphic phantom with a collapsed cone convolution method using a 3-D planning system. Validation has been performed with radiographic film and thermoluminescent dosimeters. Results have shown that the pinnacle planning system has accurately modelled doses delivered to a heterogeneous phantom with calculations and measurements agreeing within +/-3% over most areas. When treating clinically, considerations such as the volume of bowel gas should be taken into account when planning. A sample of patient CT scans showed that in the absence of a heterogeneity correction, the error in estimated dose through the rectum could be as high as 8% in the presence of large volumes of rectal gas. Considerations, such as whether the patient undergoes another CT scan, the bowel gas volume ignored or assigned a specific density needs to be taken into account and brought to the attention of the radiation oncologists for accurate treatment.
Asunto(s)
Imagenología Tridimensional/métodos , Fantasmas de Imagen , Neoplasias de la Próstata/diagnóstico por imagen , Neoplasias de la Próstata/radioterapia , Radiometría/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia Conformacional/métodos , Humanos , Masculino , Traumatismos por Radiación/etiología , Traumatismos por Radiación/prevención & control , Radiometría/instrumentación , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador/instrumentación , Radioterapia Conformacional/efectos adversos , Recto/efectos de la radiación , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Tomografía Computarizada por Rayos X/instrumentación , Tomografía Computarizada por Rayos X/métodosRESUMEN
AIM: To investigate the retinal toxicity of intravitreal injection of a novel fibrinolytic tenecteplase in rabbit eyes. METHODS: Tenecteplase (25-350 micro g in 0.1 ml BSS) was injected into the vitreous cavity of normal rabbit eyes. Control (fellow) eyes received 0.1 ml of BSS. One day, 1 week, and 2 months post-injection, the eyes were examined by slit lamp biomicroscopy, indirect ophthalmoscopy, and electroretinography, and then harvested for histopathological examination. RESULTS: No evidence of retinal toxicity was seen with tenecteplase doses up to and including 50 micro g. At a dose of 150 micro g ophthalmoscopy was normal, but histology showed mild retinal damage in the inner nuclear layer and electroretinography showed a temporary reduction in B-wave amplitude. At doses of 200 micro g and above, there was evidence of retinal toxicity on electroretinography, ophthalmoscopy, and histology. Ophthalmoscopic findings included vitreal fibrosis, retinal necrosis and tractional retinal detachment and light microscopy revealed necrosis of retinal pigment epithelium and other retinal layers. Damage was centred around the injection site but was more widespread with the higher doses. CONCLUSION: A dose of 50 micro g tenecteplase appears safe for intravitreal injection in the rabbit. Tenecteplase could have potential applications in the treatment of submacular haemorrhage and retinal vein occlusion.
Asunto(s)
Fibrinolíticos/toxicidad , Retina/efectos de los fármacos , Activador de Tejido Plasminógeno/toxicidad , Animales , Relación Dosis-Respuesta a Droga , Electrorretinografía , Inyecciones , Oftalmoscopía , Conejos , Retina/patología , Tenecteplasa , Cuerpo VítreoRESUMEN
This research aimed to quantitatively evaluate the differences in percentage dose of maximum for 6MV and 18MV x-ray beams within the first 1 cm of interactions. Thus provide quantitative information regarding the basal, dermal and subcutaneous dose differences achievable with these two types of high-energy x-ray beams. Percentage dose of maximum build up curves are measured for most clinical field sizes using 6MV and 18MV x-ray beams. Calculations are performed to produce quantitative results highlighting the percentage dose of maximum differences delivered to various depths within the skin and subcutaneous tissue region by these two beams. Results have shown that basal cell layer doses are not significantly different for 6MV and 18MV x-ray beams. At depths beyond the surface and basal cell layer there is a measurable and significant difference in delivered dose. This variation increases to 20% of maximum and 22% of maximum at 1 mm and 1 cm depths respectively. The percentage variations are larger for smaller field sizes where the photon in phantom component of the delivered dose is the most significant contributor to dose. By producing graphs or tables of % dose differences in the build up region we can provide quantitative information to the oncologist for consideration (if skin and subcutaneous tissue doses are of importance) during the beam energy selection process for treatment.
Asunto(s)
Radiometría/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Fenómenos Fisiológicos de la Piel , Relación Dosis-Respuesta en la Radiación , Humanos , Fantasmas de Imagen , Fotones , Dosis de Radiación , Radiometría/instrumentación , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Rayos XRESUMEN
This note investigates in-vivo dosimetry using a Metal Oxide Semiconductor Field Effect Transistor (MOSFET) for radiotherapy treatment at superficial and orthovoltage x-ray energies. This was performed within one fraction of the patients treatment. Standard measurements along with energy response of the detector are given. Results showed that the MOSFET measurements in-vivo agreed with calculated results on average within +/- 5.6% over all superficial and orthovoltage energies. These variations were slightly larger than TLD results with variations between measured and calculated results being +/- 5.0% for the same patient measurements. The MOSFET device provides adequate in-vivo dosimetry for superficial and orthovoltage energy treatments with the accuracy of the measurements seeming to be relatively on par with TLD in our case. The MOSFET does have the advantage of returning a relatively immediate dosimetric result after irradiation.
Asunto(s)
Radiometría/instrumentación , Radioterapia/instrumentación , Transductores , Diseño de Equipo , Análisis de Falla de Equipo , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Transistores ElectrónicosRESUMEN
The effects of chamber polarity have been investigated for the measurement of 6MV and 18MV x-ray surface dose using a parallel plate ionization chamber. Results have shown that a significant difference in measured ionization is recorded between polarities at 6MV and 18MV at the phantom surface. A polarity ratio ranging from 1.062 to 1.005 is seen for 6MV x-rays at the phantom surface for field sizes 5 cm x 5 cm to 40 cm x 40 cm when comparing positive to negative polarity. These ratio's range from 1.024 to 1.004 for 18MV x-rays with the same field sizes. When these charge reading are compared to the Dmax readings of the same polarity it is found that these polarity effects are minimal for the calculation of percentage dose results with variations being less than 1% of maximum.
Asunto(s)
Radiometría/instrumentación , Radiometría/métodos , Planificación de la Radioterapia Asistida por Computador/instrumentación , Radioterapia de Alta Energía/instrumentación , Análisis de Falla de Equipo , Control de Calidad , Dosificación Radioterapéutica , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
Dose in the build up region for high energy x-rays produced by a medical linear accelerator is affected by the x-ray source to patient surface distance (SSD). The use of isocentric treatments whereby the tumour is positions 100 cm from the source means that depending of the depth of the tumour and the size of the patient, the SSD can vary from distances of 80 cm to 100 cm. To achieve larger field sizes, the SSD can also be extended out to 120 cm at times. Results have shown that open fields are not significantly affected by SSD changes with deviations in percentage dose being less than 4% of maximum dose for SSD's from 80 cm to 120 cm SSD. With the introduction of beam modifying devices such as Perspex blocking trays, the effects are significant with a deviation of up to 22% measured at 6MV energy with a 6 mm Perspex tray for SSD's from 80 cm to 120 cm. These variations are largest at the skin surface and reduce with depth. The use of a multi leaf collimator for blocking removes extra skin dose caused by the Perspex block trays with decreasing SSD.
Asunto(s)
Radiometría/métodos , Radioterapia de Alta Energía/métodos , Fenómenos Fisiológicos de la Piel , Humanos , Neoplasias/radioterapia , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador/métodos , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
PURPOSE: The spatial resolution of stacked radiochromic film dosimeters, which have increased sensitivity from a single layer radiochromic film detector, has been studied. METHODS: A 5-layer film which can easily be constructed provided a 4.3-times increase in sensitivity over a single layer film at 670 nm readout wavelength which meant that doses as low as 0.6 Gy could be measured with an accuracy of +/-4% with the stacked dosimeter. The spatial resolution was tested by comparison of the 80%/20% penumbral widths of a 5 x 5 cm 6 MV X-ray field. RESULTS: The MD-55-2 film measured the penumbral width as 3.0 mm whereas the 5-layer stack dosimeter measured the same penumbra as 3.2 mm. CONCLUSION: The stack dosimeter can provide useful in vivo information such as the position of a diverging beam edge for treatments around critical structures such as eyes during the first fraction of treatment.
Asunto(s)
Dosimetría por Película , Dosificación RadioterapéuticaRESUMEN
This note investigates the increase of the sensitivity of radiochromic film by layering the film together. Investigations with up to five layers of radiochromic film placed together as a single dosimeter have allowed accurate two-dimensional dosimetry at low radiotherapy doses. The sensitivity of the response of the layered film increases with the number of layers, with the five-layer dosimeter increasing the change in optical density by 4.3 +/- 0.2 times that for a single layer film at 670 nm readout wavelength. Measurements in the penumbral region of a 6 MV x-ray beam show that the spatial resolution is slightly reduced with the layered film. The distance across the region from 20 to 80% of the maximum dose at the beam edge (20/80% penumbra) measured at 1.5 cm depth was measured as 3.1 +/- 0.3 and 3.5 +/- 0.3 mm for one and five layers, respectively. Thus no major reduction in spatial resolution was found by layering the film to five layers but the sensitivity was increased by 430% at 670 nm readout wavelength.